Transcription
u-centerGNSS evaluation software for WindowsUser guideAbstractThis document leads you through the efficient use of the u-centerevaluation software, the powerful and easy to use tool from u-blox forevaluating, performance analysis and configuration of u-blox GNSSpositioning chips and modules.www.u-blox.comUBX-13005250 - R30C1-Public
u-center - User guideDocument informationTitleu-centerSubtitleGNSS evaluation software for WindowsDocument typeUser guideDocument numberUBX-13005250Revision and dateR30Document statusProduction informationDisclosure restrictionC1-Public24-May-2022This document applies to the following products:Product nameType numberFirmware versionPCN referenceu-centeru-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in thisdocument. Copying, reproduction, modification or disclosure to third parties of this document or any part thereof is onlypermitted with the express written permission of u-blox.The information contained herein is provided "as is" and u-blox assumes no liability for its use. No warranty, either expressor implied, is given, including but not limited to, with respect to the accuracy, correctness, reliability and fitness for aparticular purpose of the information. This document may be revised by u-blox at any time without notice. For the most recentdocuments, visit www.u-blox.com.Copyright 2022, u-blox AG.UBX-13005250 - R30C1-PublicPage 2 of 74Production information
u-center - User guideContents1 Preface.51.1 Overview. 51.2 Using this guide.51.3 Technical support.51.3.1 Worldwide Web. 51.3.2 By email. 51.3.3 Helpful information when contacting technical support. 52 Features. 73 Getting started. 83.1 General information about displayed values. 83.2 Connecting an u-blox evaluation kit to the PC. 83.3 Installing u-center. 83.4 Connect to the receiver. 93.4.1 Select the port. 93.4.2 Select the baud rate (only for COM ports).94 Concept and philosophy. 114.1 Color and satellite coding scheme.124.2 Operating modes.
u-center evaluation software provides system integrators and end users with a quick and simple way to interface with u-blox GNSS chipsets, modules and boards. It enables easy evaluation, performance testing, development and debugging of GNSS positioning chips and modules. u-center allows easy connection to u-blox products and provides a suite .
