Transcription
QNAP Turbo NASHardware User Manual 2016. QNAP Systems, Inc. All Rights Reserved.2016/04/15
Thank you for choosing QNAP products! This user manual provides description of thehardware of the Turbo NAS and relevant guideline of certain functions. Please read carefullyand strictly adhere to the instructions of the manual.This user manual is applicable to the following Turbo NAS models:HS-210, HS-251, HS-251 , TS-112P, TS-131, TS-212P, TS-231, TS-231 ,TS-251,TS-251 , TS-251C, TS-253 Pro, TS-431, TS-431 , TS-431U, TS-451, TS-451 , TS-451S,TS-451U, TS-453 Pro, TS-453S Pro (formerly SS-453 Pro), TS-453U, TS-453U-RP,TS-463U, TS-463U-RP, TVS-463, TS-470U-SP/RP, TS-531P, TS-563, TS-651, TS-653 Pro,TVS-663, TS-831X, TS-851, TS-853 Pro, TS-853S Pro (formerly SS-853 Pro),TS-853U,TS-853U-RP, TS-863U, TS-863U-RP, TVS-863, TVS-863 , TS-870U-RP, TS-879 Pro,TS-879U-RP, TS-EC879U-RP, TS-1079 Pro, TS-1253U, TS-1253U-RP, TS-1263U,TS-1263U-RP, TS-1270U-RP, TS-1279U-RP, TS-EC1279U-RP, TS-1679U-RP,TS-EC1679U-RP, IS-453S, TS-453mini, TAS-168, TAS-268, TS-253A, TS-453A, TS-653A,TS-853A, TS-128, TS-228, TBS-453ANOTE The “Turbo NAS”& “Turbo vNAS” are hereafter referred to as “NAS”. The product you purchased may not support certain functions dedicated to specificmodels. All features, functionality, and other product specifications are subject to changewithout prior notice or obligation. Information presented is subject to change without notice. No part of this publication may be reproduced, stored in a retrieval system, ortransmitted, in any form or by any means, mechanical, electronic, photocopying,recording, or otherwise, without prior written permission of QNAP Systems, Inc.QNAP and the QNAP logo are registered trademarks of QNAP Systems, Inc. Otherproducts and company names mentioned herein may be the trademarks of theirrespective companies.2
DISCLAIMERIn no event shall QNAP Systems, Inc. (QNAP) liability exceed the price paid for the productfrom direct, indirect, special, incidental, or consequential damages resulting from the useof the product, its accompanying software, or its documentation. QNAP makes no warrantyor representation, expressed, implied, or statutory, with respect to its products or thecontents or use of this documentation and all accompanying software, and specificallydisclaims its quality, performance, merchantability, or fitness for any particular purpose.QNAP reserves the right to revise or update its products, software, or documentationwithout obligation to notify any individual or entity.Note: Back up your system periodically to avoid any potential data loss. QNAP disclaims anyresponsibility of all sorts of data loss or recovery. Should you return any components of the NAS package for refund or maintenance,make sure they are carefully packed for shipping. Any form of damages due toimproper packaging will not be compensated.3
Regulatory NoticeFCC NoticeQNAP NAS comply with different FCC compliance classes. Please refer the Appendix fordetails. Once the class of the device is determined, refer to the following correspondingstatement. FCC Class A NoticeThis device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:1.This device may not cause harmful interference.2.This device must accept any interference received, including interference that maycause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class Adigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference when the equipment is operated in acommercial environment. This equipment generates, uses, and can radiate radio frequencyenergy, and if not installed and used in accordance with the instruction manual, may causeharmful interference to radio communications. Operation of this equipment in a residentialarea is likely to cause harmful interference, in which case the user will be required tocorrect the interference at his own expense.Modifications: Any modifications made to this device that are not approved by QNAPSystems, Inc. may void the authority granted to the user by the FCC to operate thisequipment.A �오니, �.4
FCC Class B NoticeThis device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:1.This device may not cause harmful interference.2.This device must accept any interference received, including interference that maycause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses, and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the followingmeasures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected. Consult the dealer or an experienced radio/television technician for help.Modifications: Any modifications made to this device that are not approved by QNAPSystems, Inc. may void the authority granted to the user by the FCC to operate thisequipment.CE NOTICEQNAP NAS comply with different CE compliance classes. Please refer to the Appendix fordetails.5
SJ/T 11364-2006本产品符合中国 RoHS �质的含量符合中国 RoHS OOOOOOO: �材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。X: �一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。6
Symbols in this documentThis icon indicates the instructions must be strictly followed. FailureWarningto do so could result in injury to human body or death.This icon indicates the action may lead to disk clearance or loss ORCautionfailure to follow the instructions could result in data damage, diskdamage, or product damage.7
Table of ContentsTable of Contents . 8Safety Warnings . 10Chapter 1.CPU and Memory Specifications . 11Chapter 2.Power Button and Reset Button Behavior . 29Chapter 3.USB One Touch Copy . 30Chapter 4.LED and Alarm Buzzer Specifications . 31Chapter 5.Upgrade Memory on QNAP Turbo NAS (RAM Module Installation) 345.1TS-453MINI (4-BAY) . 345.2TBS-453A . 365.3TS-451S, TS-531P, TS-651, TS-831X, TS-851, TS-X53/X53S PRO, TS-563,TVS-X63, TS-X53A SERIES (2/4/6/8-BAY) . 385.4TS-431U, TS-451U, TS-X53U, TS-X63U SERIES (4/8/12-BAY) . 395.5TS-251 , TS-251, TS-451 , TS-451 . 415.6IS-453S . 44Chapter 6.6.1Network Expansion Card Installation . 47TVS-463, TS-531P, TVS-663, TS-831X, TVS-863, TS-563, TS-879 PRO, TS-1079PRO, TS-463U, TS-463U-RP. 476.2TS-463U, TS-463U-RP, TVS-471U . 516.3TS-863U, TS-863U-RP, TS-1263U, TS-1263U-RP . 54Chapter 7.7.1Install and Hot-swap Hard Drives . 57INSTALL HARD DRIVES . 577.1.1.TVS-x63, TS-563, TS-x53 Pro, TS-651, TS-831X, TS-851, TS-531P,TS-x53A. 577.1.2.TS-453Mini . 597.1.3.TS-112P, TS-212P and TS-251C . 617.1.4.TAS-168, TAS-268, TS-128, TS-228 . 637.1.5.IS-453S . 657.1.6.TBS-453A. 677.2HARD-SWAP HARD DRIVES . 68Chapter 8.RAID Recovery . 728
Chapter 9.Use the LCD Panel . 74Chapter 10. Install Power Supply Unit . 7910.11U TURBO NAS WITH HOT-SWAPPABLE PSU . 7910.22U/3U TURBO NAS (TS-853U-RP, TS-1253U-RP ONLY). 80Technical Support . 83GNU GENERAL PUBLIC LICENSE . 84Appendix A: Product Compliance Class . 979
Safety Warnings3.The NAS can operate normally in the temperature of 0ºC–40ºC and relative humidityof 0%–95%. Please make sure the environment is well-ventilated.4.The power cord and devices connected to the NAS must provide correct supply voltage(100W, 90–264V).5.Do not place the NAS in direct sunlight or near chemicals. Make sure the temperatureand humidity of the environment are in optimized level.6.Unplug the power cord and all connected cables before cleaning. Wipe the NAS with adry towel. Do not use chemical or aerosol to clean the NAS.7.Do not place any objects on the NAS for the server’s normal operation and to avoidoverheat.8.Use the flat head screws in the product package to lock the hard disks in the NAS wheninstalling hard disks for proper operation.9.Do not place the NAS near any liquid.10. Do not place the NAS on any uneven surface to avoid falling off and damage.11. Make sure the voltage is correct in the location where the NAS is installed. Contact thedistributor or the local power supply company for the information.12. Do not place any object on the power cord.13. Do not attempt to repair the NAS in any occasions. Improper disassembly of theproduct may expose the users to electric shock or other risks. For any enquiries,please contact the distributor.14. The chassis NAS models should only be installed in the server room and maintained bythe authorized server manager or IT administrator. The server room is locked by key orkeycard access and only certified staff is allowed to enter the server room.Warning: Danger of explosion if battery is incorrectly replaced. Replace only with the same orequivalent type recommended by the manufacturer. Dispose of used batteriesaccording to the manufacturer’s instructions. Do NOT touch the fan inside the system to avoid serious injuries.10
Chapter 1.CPU and Memory SpecificationsCaution: Modifying the hardware, software, or firmware of the QNAP products willvoid the warranty. QNAP is not responsible for any form of damage or loss of data causedby modding the QNAP products. Users should bear their own risks of all sorts of possibledata loss or system instabilities due to changing the hardware parts, modifying the defaultsystem firmware or installing any unauthorized third party applications on QNAP products.SystemTS-112PTS-212PCPUMarvell 1.6GHzMarvell 1.6GHzMemory512MB DDR2512MB DDR2Flash16MB16MBMemory----12TS-128TS-228Dual-core ARM v7Dual-core ARM v71.1GHz1.1GHzMemory1GB DDR31GB DDR3Flash4GB4GB----1 (3.5” HDDs only)2 (3.5” HDDs only)replaceableNumber of RAMslotsNumber of harddrive slotsSystemCPUMemoryreplaceableNumber of RAMslotsNumber of harddrive slots11
SystemTAS-168TAS-268Dual-core RealtekDual-core Realtek1.1GHz1.1GHzMemory2GB DDR32GB DDR3Flash4GB4GBMemory-CPU-replaceableNumber of RAM--slotsNumber of harddrive slotsIR sensorSystemCPU1 (3.5” HDDs only)2 (3.5” HDDs only) (QNAP remote (QNAP remotecontrol: RM-IR003)control: RM-IR003)TS-131TS-231Dual-core FreescaleTM Dual-core FreescaleTM1.2GHz1.2GHzMemory512MB DDR3512MB DDR3Flash512MB512MBMemory----12replaceableNumber of RAMslotsNumber of harddrive slots12
SystemCPUTS-431TS-431UDual-core FreescaleTM Dual-core FreescaleTM1.2GHz1.2GHzMemory512MB DDR31GB DDR3Flash512MB512MBMemory----44TS-231 TS-431 Annapurna LabsAnnapurna LabsAlpine AL-212Alpine AL-212Dual-core 1.4 GHzDual-core 1.4 GHzCortex-A15Cortex-A15Memory1GB DDR31GB DDR3Flash512MB512MB----24----replaceableNumber of RAMslotsNumber of harddrive slotsSystemCPUMemoryreplaceableNumber of RAMslotsNumber of harddrive slotsPCI-E expansionslotBuilt-in 10GbE LANports13
SystemTS-531PTS-831XQuad-core Annapurna Quad-core AnnapurnaCPUMemoryLabs Alpine AL-314Labs Alpine AL-3141.4 GHz Cortex-A151.4 GHz Cortex-A152GB/8GB DDR38GB/16GB DDR3(Expandable RAM, up (Expandable RAM, upto 16GB)to 16GB)Flash512MB512MBMemory (Compatible with (Compatible withreplaceableDDR3 RAM)DDR3 RAM)2 (SODIMM)2 (SODIMM)5811-2 x SFP Number of RAMslotsNumber of harddrive slotsPCI-E expansionslotBuilt-in 10GbE LANportsSystemHS-210CPUMarvell 1.6GHzMemory512MB DDR3Flash16MBMemory-replaceableNumber of RAM-slotsNumber of harddrive slots214
SystemCPUMemoryTS-451UTS-453UTS-453U-RPDual-core Intel Quad-core Intel Quad-core Intel Celeron 2.41GHzCeleron 2.0GHz (up Celeron 2.0GHz (up(up to 2.58GHz)to 2.42GHz)to 2.42GHz)1GB DDR3L4GB/8GB DDR3L4GB/8GB DDR3L(Expandable RAM, up (Expandable RAM, up (Expandable RAM, upto 8GB)to 8GB)to 8GB)Flash512MB (USB DOM)512MB (USB DOM)512MB (USB DOM)Memory (Compatible with (Compatible with (Compatible withreplaceableDDR3L RAM)DDR3L RAM)DDR3L RAM)2 (SODIMM)2 (SODIMM)2 (SODIMM)444Power supply unit250W250W2 x 250WSystemTS-853UTS-853U-RPQuad-core Intel Quad-core Intel Number of RAMslotsNumber of harddrive slotsCPUMemoryCeleron 2.0GHz (up Celeron 2.0GHz (upto 2.42GHz)to 2.42GHz)4GB/8GB DDR3L4GB/8GB DDR3L(Expandable RAM, up (Expandable RAM, upto 8GB)to 8GB)Flash512MB (USB DOM)512MB (USB DOM)Memory (Compatible with (Compatible withreplaceableDDR3L RAM)DDR3L RAM)2 (SODIMM)2 (SODIMM)88250W2 x 250WNumber of RAMslotsNumber of harddrive slotsPower supply unit15
SystemCPUMemoryTS-1253UTS-1253U-RPQuad-core Intel Quad-core Intel Celeron 2.0GHz (up Celeron 2.0GHz (upto 2.42GHz)to 2.42GHz)4GB/8GB DDR3L4GB/8GB DDR3L(Expandable RAM, up (Expandable RAM, upto 8GB)to 8GB)Flash512MB (USB DOM)512MB (USB DOM)Memory (Compatible with (Compatible withreplaceableDDR3L RAM)DDR3L RAM)2 (SODIMM)2 (SODIMM)1212Power supply unit250W2 x 250WSystemIS-453SNumber of RAMslotsNumber of harddrive slotsCPUQuad-core Intel Atom 1.91GHzIS-453S-2G: 2GBMemoryDDR3LIS-453S-8G: 8GBDDR3LFlash512MB (USB DOM)CPU replaceable-MemoryreplaceableNumber of RAMslotsNumber of harddrive slots (Compatible withDDR3L-1333/1600SODIMM RAM)2 (SODIMM)4 (2.5" only)16
SystemDual-core IntelCPUTS-251 /TS-251CTS-251-4G Dual-core Intel Celeron 2.41GHzCeleron 2.41GHz(up to 2.58GHz)(up to 2.58GHz)1GB DDR3L1GB / 4GB DDR3LMemory(Expandable RAM, upto 8GB)FlashMemoryreplaceableNumber of RAMslotsNumber of harddrive slotsIR sensorSystemCPUMemory512MB512MB (Compatible with-DDR3L RAM)-2(SODIMM)2 (3.5” HDDs only)2 (QNAP remote (QNAP remotecontrol: RM-IR002)control: RM-IR002)TS-451 /TS-451STS-451-4GDual-core Intel Dual-core Intel Celeron 2.41GHzCeleron 2.41GHz(up to 2.58GHz)(up to 2.58GHz)1GB / 4GB DDR3L1GB DDR3L(Expandable RAM, up (Expandable RAM, upto 8GB)to 8GB)Flash512MB512MBMemory (Compatible with (Compatible withreplaceableDDR3L RAM)DDR3L RAM)2 (SODIMM)2 (SODIMM)44 (2.5” only) (QNAP remote (QNAP remotecontrol: RM-IR002)control: RM-IR002)Number of RAMslotsNumber of harddrive slotsIR sensor17
SystemTS-651 /TS-651-4GDual-core IntelCPUMemoryTS-851 /TS-851-4G Dual-core Intel Celeron 2.41GHzCeleron 2.41GHz(up to 2.58GHz)(up to 2.58GHz)1GB / 4GB DDR3L1GB / 4GB DDR3L(Expandable RAM, up (Expandable RAM, upto 8GB)to 8GB)Flash512MB512MBMemory (Compatible with (Compatible withreplaceableDDR3L RAM)DDR3L RAM)2 (SODIMM)2 (SODIMM)68 (QNAP remote (QNAP remotecontrol: RM-IR002)control: RM-IR002)Number of RAMslotsNumber of harddrive slotsIR sensorSystemQuad-core IntelCPUHS-251 /HS-251 HS-251-2G Dual-core Intel Celeron 2.0GHz (up Celeron 2.41GHzto 2.42GHz)(up to 2.58GHz)Memory2GB DDR3L1GB / 2GB DDR3LFlash512MB512MBCPU replaceable------22 (QNAP remote (QNAP remotecontrol: RM-IR002)control: RM-IR002)MemoryreplaceableNumber of RAMslotsNumber of harddrive slotsIR sensor18
53A-8G-1TB/TBS-453A-4G-51/TBS-453A-8G-512GB2GB Quad-core Intel Celeron N3150Celeron N31501.6GHz (up to1.6GHz (up to2.08GHz)2.08GHz)Memory4GB DDR3L8GB DDR3LFlash4GB4GBCPU replaceable--Memory (Compatible with (Compatible withreplaceableDDR3L RAM)DDR3L RAM)2 (SODIMM)2 (SODIMM)44 (QNAP remote (QNAP remotecontrol: RM-IR002 &control: RM-IR002 &RM-IR003)RM-IR003)Quad-core IntelCPUNumber of RAMslotsNumber of harddrive slotsIR sensor19
SystemTS-251 -2G /TS-251 -8GQuad-core IntelCPUMemoryFlashMemoryreplaceableNumber of RAMslotsNumber of harddrive slotsLCD panelIR sensorTS-253 Pro /TS-453mini-2G /TS-253 Pro-8G Quad-core Intel TS-453mini-8GQuad-core Intel Celeron 2.0GHz (up Celeron 2.0GHz (up Celeron 2.0GHz (upto 2.42GHz)to 2.42GHz)to 2.42GHz)2GB / 8GB DDR3L2GB / 8GB DDR3L2GB / 8GB DDR3L(Expandable RAM, up (Expandable RAM, up (Expandable RAM, upto 8GB)to 8GB)to 8GB)512MB512MB512MB (Compatible with (Compatible with (Compatible AM)RAM)RAM)2(SODIMM)2(SODIMM)2 (SODIMM)224--- (QNAP remote (QNAP remote (QNAP remotecontrol: RM-IR002)control: RM-IR002)control: RM-IR002)20
SystemTS-451 -2G /TS-451 -8GQuad-core IntelCPUMemoryTS-453 Pro / TS-653 Pro /TS-453 Pro-8GTS-653 Pro-8G Quad-core Intel Quad-core IntelCeleron 2.0GHz (up Celeron 2.0GHz (up Celeron 2.0GHz (upto 2.42GHz)to 2.42GHz)to 2.42GHz)2GB / 8GB DDR3L2GB / 8GB DDR3L2GB / 8GB DDR3L(Expandable RAM, up (Expandable RAM, up (Expandable RAM, upto 8GB)to 8GB)to 8GB)Flash512MB512MB512MBMemory (Compatible with (Compatible with (Compatible withreplaceableDDR3L RAM)DDR3L RAM)DDR3L RAM)2 (SODIMM)2 (SODIMM)2 (SODIMM)446- (QNAP remote (QNAP remote (QNAP remotecontrol: RM-IR002)control: RM-IR002)control: RM-IR002)Number of RAMslotsNumber of harddrive slotsLCD panelIR sensor21
SystemTS-853 Pro /TS-853 Pro-8GQuad-core Intel CPUMemoryTS-453S ProTS-853S(Formerly thePro(Formerly theSS-453 Pro)SS-853 Pro)Quad-core Intel Quad-core Intel Celeron 2.0GHz (up Celeron 2.0GHz (up Celeron 2.0GHz (upto 2.42GHz)to 2.42GHz)to 2.42GHz)2GB / 8GB DDR3L4GB DDR3L4GB DDR3L(Expandable RAM, up (Expandable RAM, up (Expandable RAM, upto 8GB)to 8GB)to 8GB)Flash512MB512MB512MBMemory (Compatible with (Compatible with (Compatible withreplaceableDDR3L RAM)DDR3L RAM)DDR3L RAM)2(SODIMM)2(SODIMM)2(SODIMM)84 (2.5” only)8 (2.5” only) - (QNAP remote (QNAP remote (QNAP remotecontrol: RM-IR002)control: RM-IR002)control: RM-IR002)Number of RAMslotsNumber of harddrive slotsLCD panelIR sensor22
SystemCPUMemoryTS-563-4G /TVS-463-4G /TVS-663-4G /TS-563-8GTVS-463-8GTVS-663-8GQuad-core AMDQuad-core AMDQuad-core AMD2.0GHz2.4GHz2.4GHz4/8 GB DDR3L4/8 GB DDR3L4/8 GB DDR3L(Expandable RAM, up (Expandable RAM, up (Expandable RAM, upto 16GB)to 16GB)to 16GB)Flash512MB512MB512MBMemory (Compatible with (Compatible with (Compatible withreplaceableDDR3L-1600 RAM)DDR3L-1600 RAM)DDR3L-1600 RAM)2(SODIMM)2(SODIMM)2(SODIMM)546111HDMI- LCD panel- - (QNAP remote (QNAP remotecontrol: RM-IR002)control: RM-IR002)Number of RAMslotsNumber of harddrive slotsPCI-E expansionslotIR sensor23
SystemCPUMemoryTVS-863-4G /TVS-863 -8G /TVS-863-8GTVS-863 -16GQuad-core AMDQuad-core AMD2.4GHz2.4GHz4/8 GB DDR3L8/16 GB DDR3L(Expandable RAM, up (Expandable RAM, upto 16GB)to 16GB)Flash512MB512MBMemory (Compatible with (Compatible withreplaceableDDR3L-1600 RAM)DDR3L-1600 RAM)2(SODIMM)2(SODIMM)88Number of RAMslotsNumber of harddrive slotsPCI-E expansionslot1 (Pre-installed11-port 10GbE NIC)HDMI LCD panel (QNAP remote (QNAP remotecontrol: RM-IR002)control: RM-IR002)IR sensor24
SystemCPUMemoryTS-253A-4G /TS-453A -4G /TS-653A -4G /TS-253A -8GTS-453A -8GTS-653A -8GQuad-core Intel Quad-core Intel Quad-core Intel Celeron N3150Celeron N3150Celeron N31501.6GHz (up to1.6GHz (up to1.6GHz (up to2.08GHz)2.08GHz)2.08GHz)4/8 GB DDR3L4/8 GB DDR3L4/8 GB DDR3L(Expandable RAM, up (Expandable RAM, up (Expandable RAM, upto 8GB)to 8GB)to 8GB)Flash512MB512MB512MBMemory (Compatible with (Compatible with (Compatible withreplaceableDDR3L-1600 RAM)DDR3L-1600 RAM)DDR3L-1600 RAM)2(SODIMM)2(SODIMM)2(SODIMM)246---HDMI222LCD panel- (QNAP remote (QNAP remote (QNAP remotecontrol: RM-IR002)control: RM-IR002)control: RM-IR002)Number of RAMslotsNumber of harddrive slotsPCI-E expansionslotIR sensor25
SystemTS-853A -4G /TS-853A -8GQuad-core Intel CPUCeleron N31501.6GHz (up to2.08GHz)4/8 GB DDR3LMemory(Expandable RAM, upto 8GB)Flash512MBMemory (Compatible withreplaceableDDR3L-1600 RAM)Number of RAMslotsNumber of harddrive slotsPCI-E expansionslot2(SODIMM)8-HDMI2LCD panel IR sensor (QNAP remotecontrol: RM-IR002)26
SystemCPUMemoryTS-463UTS-463U-RPTS-863UQuad-core AMDQuad-core AMDQuad-core AMD2.0GHz2.0GHz2.0GHz4 GB DDR3L4 GB DDR3L4 GB DDR3L(Expandable RAM, up (Expandable RAM, up (Expandable RAM, upto 16GB)to 16GB)to 16GB)Flash512MB512MB512MBMemory (Compatible with (Compatible with (Compatible withreplaceableDDR3L-1600 RAM)DDR3L-1600 RAM)DDR3L-1600 RAM)2(SODIMM)2(SODIMM)2(SODIMM)448PCI-E expansion1 (Pre-installed1 (Pre-installed1 (Pre-installedslotLAN-10G1SR-D NIC)LAN-10G1SR-D NIC)LAN-10G1SR-U NIC)HDMI---LCD panel---Number of RAMslotsNumber of harddrive slots27
ore AMDQuad-core AMDQuad-core AMD2.0GHz2.0GHz2.0GHz4 GB DDR3L4 GB DDR3L4 GB DDR3L(Expandable RAM, up (Expandable RAM, up (Expandable RAM, upto 16GB)to 16GB)to 16GB)Flash512MB512MB512MBMemory (Compatible with (Compatible with (Compatible withreplaceableDDR3L-1600 RAM)DDR3L-1600 RAM)DDR3L-1600 RAM)2(SODIMM)2(SODIMM)2(SODIMM)81212PCI-E expansion1 (Pre-installed1 (Pre-installed1 (Pre-installedslotLAN-10G1SR-U NIC)LAN-10G1SR-U NIC)LAN-10G1SR-U NIC)HDMI---LCD panel---Number of RAMslotsNumber of harddrive slots28
Chapter 2. Power button: Press to turn on or turn off.SystemAll models Power Button and Reset Button BehaviorPower buttonPower button(Hardware turn(Turn on)off)Press once1.5 secPower button(Force turn off)5 secReset button: Press to reset the system settings.SystemAll modelsBasic system resetAdvanced system reset(1 beep)(2 beeps)3 sec10 secBasic system reset (3 sec)Press the reset button for 3 seconds, a beep sound will be heard. The following settings arereset to default: System administration password: admin TCP/IP configuration: Obtain IP address settings automatically via DHCP TCP/IP configuration: Disable Jumbo Frame TCP/IP configuration: If port trunking is enabled (dual LAN models only), the porttrunking mode will be reset to “Active Backup (Failover)”. System Port: 8080 (system service port) Security Level: Low (Allow all connections) LCD panel password: (blank)* VLAN will be disabled*This feature is only provided by the NAS models with LCD panels. Please visithttp://www.qnap.comfor details.Advanced system reset (10 sec)Press the reset button for 10 seconds; you will hear two beeps at the third and the tenthseconds. The NAS will reset all the system settings to default as it does by web-basedsystem reset in “Administration” “Restore to Factory Default” except all the data arereserved. The settings such as the users, user groups, and the network share folderspreviously created will be cleared. To retrieve the old data after the advanced system reset,create the same network share folders on the NAS and the data will be accessible again.29
Chapter 3.USB One Touch CopySystemAll NAS modelsNumber of seconds (press the one touch copy button totrigger data copy)0.5 secData Copy by the Front USB PortThe NAS supports instant data copy backup from the external USB device to the NAS or theother way round by the front one touch copy button. To use this function, follow the stepsbelow:1.Make sure a hard drive is installed and formatted on the NAS. The default networkshare Qusb or Usb is created.2.Turn on the NAS.3.Configure the behavior of the Copy button on “Backup” “USB one touch copy” page.4.Connect the USB storage device to the front USB port of the NAS.5.Press the Copy button. The USB LED will flash. The data will be copied to or from theUSB device according to the NAS settings.Note: This feature adopts incremental backup. After the first time data backup, the NAS onlycopies the changed files since the last backup. This feature is only available on certain NAS models. Please refer to the productspecification table for details at www.qnap.com.30
Chapter 4.LED and Alarm Buzzer SpecificationsThe LED indicators of the NAS indicate the system status and information. When the NAS isturned on, check the following items to make sure the system status is normal. Note thatthe following LED information is applicable only when users have properly installed the harddrive, and connected the NAS to the network and the power supply.LEDColorLED StatusDescription1.Flashes greenand redalternatelyevery 0.5 .8.The hard drive on the NAS is beingformatted.The NAS is being initialized.The system firmware is being updated.RAID rebuilding is in process.Online RAID Capacity Expansion is inprocess.Online RAID Level Migration is in process.The hard drive is invalid.The disk volume has reached its fullcapacity.The disk volume is going to be full.The system fan is out of function.An error occurs when accessing(read/write) the disk data.A bad sector is detected on the harddrive.The NAS is in degraded read-only mode(2 member drives fail in a RAID 5 or RAID6 configuration, the disk data can still beread).Hardware self-test error.Flashes redevery 0.5 secThe NAS is in degraded mode (one memberdrive fails in RAID 1, RAID 5 or RAID 6configuration).Flashes greenevery 0.5 sec1.2.3.Flashes greenevery 2secondsThe NAS is in S3 sleep mode1.GreenThe NAS is starting up.The NAS is not configured.A hard disk drive is not formatted.The NAS is ready.1This feature is only available on certain NAS models. Please refer to the product specification tablefor details at www.qnap.com.31
LEDColorLED StatusDescriptionAll the hard disk drives on the NAS are instandby mode.OffLANOrangeThe disk data is being accessed from thenetwork and a read/write error occurs duringthe process.FlashesorangeThe NAS is being accessed from the network.OrangeThe 10GbE network expansion card isinstalled.Green10GbE2GreenOffNo 10GbE network expansion card is installed.The disk data is being accessed and aread/write error occurs during the process.Flashes redRed/GreenHDD3RedA hard disk drive read/write error occurs.Flashes greenGreenThe disk data is being accessed.The hard disk drive can be accessed.1.2.Flashes blueevery 0.5 sec3.4.USB3BlueA front USB device is detected (after thedevice is mounted).Blue1.2.OffFlasheseSATA3A USB device (connected to the front USBport) is being detected.A USB device (connected to the front USBport) is being removed from the NAS.The USB device (connected to the frontUSB port of the NAS) is being accessed.The data is being copied to or from theexternal USB or eSATA device.No USB device is detected.The NAS has finished copying the data toor from the USB device connected to thefront USB port.The eSATA device is being accessed.OrangeOffNo eSATA device can be detected.2The 10 GbE network expansion function is only supported by the TVS-463, TVS-663,TVS-863/863 , TS-879 Pro, TS-1079 Pro, TS-879U-RP, TS-1279U-RP, TS-EC879U-RP,TS-EC1279U-RP, TS-1679U-RP, TS-EC1679U-RP, TS-870U-RP, and TS-1270U-RP.3This feature is only available on certain NAS models. Please refer to the product specification tablefor details at www.qnap.com.32
Beep alarm (for all NAS models)The beep alarm can be disabled in “System Administration” “Hardware Settings”.Beep soundNumber of TimesDescription1.2.Short beep (0.5 sec)13.4.The NAS is starting up.The NAS is being shut down(software shutdown).The user presses the reset button toreset the NAS.The system firmware has beenupdated.The user tries to copy the NAS data to theexternal storage device from the frontUSB port, but the data cannot be copied.Short beep (0.5 sec)3Long beep (1.5 sec)3, every 5 minThe system fan is out of function.1.2.3.24.Long beep (1.5 sec)5.1.12.33The disk volume is going to be full.The disk volume has reached its
7. Do not place any objects on the NAS for the server's normal operation and to avoid overheat. 8. Use the flat head screws in the product package to lock the hard disks in the NAS when installing hard disks for proper operation. 9. Do not place the NAS near any liquid. 10. Do not place the NAS on any uneven surface to avoid falling off and .
