WIXLIB

Consumables forConsumables forShimadzuShimadzuLC-2010,(SIL-2AS),SIL-6A, SIL-6B, SIL-7A,SIL-8A, SIL-9A, SIL-10A(SIL-10AF, SIL-10AP, SIL-10Ai,SIL-10ADVP, SIL-10AxL)SIL-HTSIL-HTSnap Ring Seals ND11 (with assembled Septa)11 15 132311 15 063711 15 115111 15 132511 15 063611 15 126811 15 132411 15 065011 15 126911 15 1326LPP Art.-No. 08 05 0944See ShimadzuArt.-No.08 05 0890 08 14 0876LPP Art.DescriptionDW-Block0.1ml MT0.35ml T-Micro-Insert, DW-Micro-Insert,Polypropylene,15.5 x 6mm,42.5 x 6mm,15.5 x 6mm,42.5 x 6mm,96 Positions clear glass, flat bottom,clear glass, 17mm top,clear glass,clear glass,(Ritter);with assembledwith assembledflat bottom,17mm top9mm PE-Cap,9mm PE-Cap,5.9mm high, red,5.9mm high, red,Silicone white/PTFE red,Silicone white/PTFE red,35 shore A, 1.9mm, slitted 35 shore A, 1.9mm, slitted10 x 96 pieces10 x 96 pieces10 x 96 pieces10 x 96 piecesper PP-Boxper PP-Boxper PP-Boxper PP-BoxMicrotiter-Plate"riplate",Polypropylene,96 Positions(Ritter);LPPPackaging Unit08 14 088908 09 0875 08 09 0888 09 15 07639mm PE-Cap,5.9mm high,red,Silicone white/PTFE red,35 shore A,1.9mm, slitted96 piecesper PE-BagOther ServicesLC LC/MS11 15 126796 Position Blocks for SIL-HT11mm PE Snap Ring Cap, transp., centre hole; Natural Rubber red-orange/TEF transp.,55 shore A, 1.0mm11mm PE Snap Ring Cap, blue, centre hole; Natural Rubber red-orange/TEF transp.,55 shore A, 1.0mm11mm PE Snap Ring Cap, red, centre hole;Natural Rubber red-orange/TEF transp.,55 shore A, 1.0mm11mm PE Snap Ring Cap, transp., centre hole;Silicone white/PTFE red, 35 shore A,1.3mm11mm PE Snap Ring Cap, blue, centre hole;Silicone white/PTFE red, 35 shore A,1.3mm11mm PE Snap Ring Cap, red, centre hole;Silicone white/PTFE red, 35 shore A,1.3mm11mm PE Snap Ring Cap, transp., centre hole; PTFE red/Silicone white/PTFE red, 45 shore A,1.0mm11mm PE Snap Ring Cap, blue, centre hole; PTFE red/Silicone white/PTFE red, 45 shore A,1.0mmPTFE red/Silicone white/PTFE red, 45 shore A,11mm PE Snap Ring Cap, red, centre hole;1.0mm11mm PE Snap Ring Cap, transp., centre hole; Silicone white/PTFE blue, cross-slitted, 60 shore A,1.0mm11mm PE Snap Ring Cap, blue, centre hole; Silicone white/PTFE blue, cross-slitted, 60 shore A,1.0mmSilicone white/PTFE blue, cross-slitted, 60 shore A,11mm PE Snap Ring Cap, red, centre hole;1.0mmLC LC/MS11 15 0635Further 11mm Snap Ring Seals with different Septaresp. with green or yellow Caps are available!Packaging Unit: 100 pieces per PE-Bag08 03 08848mm Alu. Crimp Cap, clear lacq., centre hole; Silicone dark blue/PTFE white, 45 shore A, 1.3mm08 03 02498mm Alu. Crimp Cap, clear lacq., centre hole;08 03 11561.3mm8mm Alu. Crimp Cap, clear lacq., centre hole; Silicone white/PTFE red, 35 shore A, 1.3mm, slitted08 03 0113Upon request we can alsosupply vials with abarcode label!Upon request we can alsosupply pre-sealed vials!Seals for Crimp Neck ND8 (with assembled Septa)Any combination of 1.5ml or 4ml Vialswith appropriate Seals of your choicecan be supplied as 2in1 KIT!Special La-Pha-Pack 2in1 KITs for SHIMADZUSilicone white/PTFE red, 35 shore A,SCREW NECK ND13SCREW NECK ND10Article No.2in1 KIT10 32 128210 32 132910 32 144210 32 133010 32 128310 32 13318mm Alu. Crimp Cap, clear lacq., centre hole; PTFE red/Silicone white/PTFE red, 45 shore A,1.0mmFurther 8mm Crimp Seals with different Septa are available!Packaging Unit: 100 pieces per PE-Bag7Vial Seal10 09 0743 10 15 125710 09 0743 10 15 132810 09 0743 10 15 137010 09 1196 10 15 132810 09 1197 10 15 125710 09 1197 10 15 1328Article No.2in1 KIT13 28 106913 28 107013 28 107113 28 107413 28 107513 28 1076Further 2in1 KITs upon request!Vial Seal/Cap Liner13 09 0222 13 15 081513 09 0222 13 15 029213 09 0222 13 08 0166 12 02 016813 09 0280 13 15 081513 09 0280 13 15 029213 09 0280 13 08 0166 12 02 01688

La-Pha-Pack Werner Reifferscheidt GmbHSCREW NECK ND8Tel.: ( 49) 24 23 / 94 31-0Fax: ( 49) 24 23 / 94 31-33 E-Mail: Service@La-Pha-Pack.comLa-Pha-Pack25mm HPLCSyringe FiltersConsumables for Werner Reifferscheidt GmbHTel.: ( 49) 24 23 / 94 31-0Fax: ( 49) 24 23 / 94 31-33 E-Mail: Service@La-Pha-Pack.comSCREW NECK ND13SCREW NECK ND10Consumables forShimadzuShimadzuLC-2010,(SIL-2AS),SIL-6A, SIL-6B, SIL-7A,SIL-8A, SIL-9A, SIL-10A(SIL-10AF, SIL-10AP, SIL-10Ai,SIL-10ADVP, SIL-10AxL)SIL-HTAOC-20i, AOC-20s,AOC-17,AOC-14/1400,AOC-5000Screw Neck ND8(Special 8mm Screw Cap required)1:1DrawingsScrew Neck ND13 (not for AOC-5000)1:1DrawingsReagentBottle20 09 1405See ShimadzuArt.-No.100 piecesper PP-BoxProFillTM HPLC Syringe Filters (Other HPLC consumables)LPP Art.DescriptionLPPPackaging Unit25 16 03494mlScrew Neck Vial,45 x 14.75mm,clear glass,st1 hydrol. Class,label filling lines4mlScrew Neck Vial,45 x 14.75mm,amber glass,st1 hydrol. class4mlScrew Neck Vial,45 x 14.75mm,amber glass,st1 hydrol. Class,label filling lines0.3mlMicro-Insert,40 x 6mm,clear glass,15mm topSpring50 x 7.5mmFor Micro-Insert40 09 0146100 piecesper PP-Box100 piecesper PP-Box100 piecesper PP-Box100 piecesper PP-Box10 x 100 piecesper PP-Box100 piecesper PE-BagScrew Neck ND10(wide opening)25 16 035025 16 roFillTM25mm HPLC Syringe Filter, 25mm HPLC Syringe Filter, 25mm HPLC Syringe Filter, 25mm HPLC Syringe Filter, 25mm HPLC Syringe Filter, 25mm HPLC Syringe Filter,PTFE, green,PTFE, natural,Reg. Cellulose (RC), blue, Reg. Cellulose (RC), yellow, Nylon (PA), bright blue,Nylon (PA), bright 0 pieces per PE-Bag,add. packed in a PP-Box100 pieces per PE-Bag,add. packed in a PP-Box100 pieces per PE-Bag,add. packed in a PP-Box100 pieces per PE-Bag,add. packed in a PP-Box100 pieces per PE-Bag,add. packed in a PP-Box100 pieces per PE-Bag,add. packed in a PP-BoxHydrophobic(water repellent)Hydrophobic(water ilicSample Retention 0,1mlPressure Rating: 500 kPa( 5 bar 72 psi)Effective Filter Area: 3.9 cm²Luer-Lock-Inlet (female)Luer-Slip (male)Sample Retention 0,1mlPressure Rating: 500 kPa( 5 bar 72 psi)Effective Filter Area: 3.9 cm²Luer-Lock-Inlet (female)Luer-Slip (male)Sample Retention 0,1mlPressure Rating: 500 kPa( 5 bar 72 psi)Effective Filter Area: 3.9 cm²Luer-Lock-Inlet (female)Luer-Slip (male)Sample Retention 0,1mlPressure Rating: 500 kPa( 5 bar 72 psi)Effective Filter Area: 3.9 cm²Luer-Lock-Inlet (female)Luer-Slip (male)Sample Retention 0,1mlPressure Rating: 500 kPa( 5 bar 72 psi)Effective Filter Area: 3.9 cm²Luer-Lock-Inlet (female)Luer-Slip (male)Sample Retention 0,1mlPressure Rating: 500 kPa( 5 bar 72 psi)Effective Filter Area: 3.9 cm²Luer-Lock-Inlet (female)Luer-Slip (male)chemically high resitantchemically high resitantgood moistening properties,wet durablegood moistening properties,wet durablehigh mechanical stability,i.e. Wet dry durablehigh mechanical stability,i.e. Wet dry durablefor organic solutions,aggressive acids and basesor cryo liquidsfor organic solutions,aggressive acids and basesor cryo liquidsfor aqueous and organicmedia, not suitable foraggressive acids and basesfor aqueous and organicmedia, not suitable foraggressive acids and basesfor aqueous and organicmedia (often used forpharmaceutical application)for aqueous and organicmedia (often used forpharmaceutical application)AOC-500025 16 03484mlScrew Neck Vial,45 x 14.75mm,clear glass,st1 hydrol. classAOC-500025 16 034750 13 0147Crimp Neck ND81:1Drawings25 16 034640 09 0146AOC-5000100 piecesper PP-Box10mlHeadspace-Vial,46 x 22.5mm,clear glass,1st hydrol. class,,DIN Crimp Neck,rounded bottom13 09 1336AOC-5000LPPPackaging Unit1.5ml1.5ml1.5ml0.1ml0.1ml1.1mlScrew Neck Vial, Screw Neck Vial, Screw Neck Vial, Screw Neck Vial, Micro-Insert,Micro-Insert,32 x 11.6mm,32 x 11.6mm,32 x 11.6mm,30 x 5mm,28 x 5mm,32 x 11.6mm,clear glass,amber glass,amber glass,clear glass,clear glass,clear glass,15mm top with assembled1st hydrol. class,, 1st hydrol. class,, 1st hydrol. class, 1st hydrol. class,plastic springsmall opening, small openingsmall opening,conicallabel label filling linesfilling lines10 x 100 pieces 10 x 100 pieces100 pieces100 pieces100 pieces100 piecesper PP-Boxper PP-Boxper PP-Boxper PP-Boxper PP-Boxper PP-Box13 09 0280AOC-50001.5mlScrew Neck Vial,32 x 11.6mm,clear glass,1st hydrol. class,small opening13 09 1335AOC-5000LPP Art.DescriptionLPP Art.-No. 13 09 0222See ShimadzuArt.-No.GCLPP Art.-No. 11 09 0210 11 09 0419 11 09 0259 11 09 0382 11 09 0417 05 09 0129 05 09 0968LC LC/MS LPP Art.-No. 08 09 0305 08 09 0258 08 09 0405 08 09 0406 08 09 0276 08 09 0606 10 09 0743 10 09 1196 10 09 1197See ShimadzuArt.-No.LPP Art.Description9LPPPackaging rimp NeckCrimp NeckCrimp NeckCrimp NeckCrimp NeckCrimp NeckScrew NeckScrew NeckScrew NeckMicro-Vial ND8, Micro-Vial ND8,Vial ND8,Vial ND8,Micro-Vial ND8, Micro-Vial ND8, Vial ND10,Vial ND10,Vial ND10,40 x 7mm,40 x 7mm,40 x 7mm,40 x 7mm,31.5 x 5.5mm, 31.5 x 5.5mm, 32 x 11.6mm, 32 x 11.6mm,32 x 11.6mm,clear glass,amber glass,clear glass,amber glass,clear glass,clear glass,clear glass,clear glass,amber glass,1st hydrol. class, 1st hydrol. class, 1st hydrol. class 1st hydrol. class 1st hydrol. Class,1st hydrol. Class, 1st hydrol. class, 1st hydrol. class, 1st hydrol. class,conicalconicalround bottomconicalwide opening wide opening, wide opening,label filling lineslabel filling lines100 pieces100 pieces10 x 100 pieces 10 x 100 pieces 10 x 100 pieces 10 x 100 pieces 10 x 100 pieces 10 x 100 pieces 100 piecesper PP-Boxper PP-Boxper PP-Boxper PP-Boxper PP-Boxper PP-Boxper PP-Boxper PP-Boxper PP-Box10

La-Pha-Pack Werner Reifferscheidt GmbHTel.: ( 49) 24 23 / 94 31-0Fax: ( 49) 24 23 / 94 31-33 E-Mail: Service@La-Pha-Pack.comSHORT THREAD ND9La-Pha-Pack Werner Reifferscheidt GmbHTel.: ( 49) 24 23 / 94 31-0Fax: ( 49) 24 23 / 94 31-33 E-Mail: Service@La-Pha-Pack.comSCREW NECK ND8CRIMP NECK ND11MICRO-INSERTSConsumables forConsumables forShimadzuShimadzuAOC-20i, AOC-20s,AOC-17,AOC-14/1400AOC-5000AOC-20i, AOC-20s,AOC-17,AOC-14/1400,AOC-5000MICRO-INSERTS FOR WIDE OPENING (Screw Neck ND10, Short Thread ND9, Crimp Neck ND11, Snap Ring ND11)SILANIZED1:1DrawingsCrimp Neck ND11 (wide opening)11 09 035611 09 047611 09 047711 09 061911 14 1190 11 14 1266LPP Art.Description1.5mlCrimp Neck Vial,32 x 11.6mm,clear glass,1st hydrol. class,wide opening1.5mlCrimp Neck Vial,32 x 11.6mm,clear glass,1st hydrol. class,wide opening,label filling lines100 piecesper PP-Box1.5mlCrimp Neck Vial,32 x 11.6mm,amber glass,1st hydrol. class,wide opening,label filling lines100 piecesper PP-Box1.1mlMicroliterCrimp NeckVial ND11,32 x 11.6mm,clear glass,st1 hydrol. classTopSertTMTPX Snap RingVial ND11,32 x 11.6mm,with integrated0.2ml GlassMicro-Insert100 piecesper PP-Box100 piecesper PP-BoxLPPPackaging Unit100 piecesper PP-BoxTopSertTMTPX Snap RingVial ND11,32 x 11.6mm,with integratedSILANIZED0.2ml GlassMicro-Insert100 piecesper PP-BoxLPP Art.Description11 09 0921Crimp Neck Vialwith integrated0.2ml Micro-Insert,clear glass,1st hydrol. class,label filling linesLPPPackaging Unit06 09 035706 09 066906 09 086606 09 086506 09 12400.1mlMicro-Insert,31 x 6mm,clear glass,15mm top0.1mlMicro-Insert,31 x 6mm,clear glass,12mm top0.2mlMicro-Insert,31 x 6mm,clear glass,flat bottom10 x 100 piecesper PP-Box10 x 100 piecesper PP-Box10 x 100 piecesper PP-Box0.1mlMicro-Insert,28 x 6mm,clear glass,with assembledplastic spring10 x 100 piecesper PP-Box0.1mlMicro-Insert,31 x 6mm,clear glass,15mm topSILANIZED10 x 100 piecesper PP-BoxGCLPP Art.-No.See ShimadzuArt.-No.LPP Art.-No.See ShimadzuArt.-No.GCSILANIZED1:1DrawingsScrew Neck ND8(Special 8mm Screw Cap required)1:1Drawings100 piecesper PP-BoxWasherBottleforAOC-5000Short Thread ND9 (wide opening)LPP gs11 09 0500 11 09 0519 11 09 0520 11 19 0932 11 19 1205 11 09 0620 11 14 1189 11 09 0999(11 09 1241)(11 09 1242) (11 19 1216)(11 19 1516)(11 14 1265)LPP Art.-No. 11 09 0210 11 09 0419 11 09 0259 11 09 0382 11 09 0417 05 09 0129 05 09 0968See ShimadzuArt.-No.20 09 1405LPP Art.Description10mlHeadspace-Vial,46 x 22.5mm,clear glass,1st hydrol. class,DIN Crimp Neck,rounded bottomSee ShimadzuArt.-No.LPP Art.DescriptionLPPPackaging Unit1.5ml1.5ml1.5mlShort Thread Vial, Short Thread Vial, Short Thread Vial,32 x 11.6mm,32 x 11.6mm,32 x 11.6mm,amber glass,clear glass,clear glass,1st hydrol. class, 1st hydrol. class, 1st hydrol. class,wide openingwide opening,wide opening,label label filling linesfilling lines(Silanized)(Silanized)100 pieces100 pieces100 piecesper PP-Boxper PP-Boxper PP-BoxShort Thread leneMicroliter TPX Short Thread with integrated0.2ml Micro-Insert,Short Thread Short Thread Vial, Short ThreadVial ND9,clear glass,32 x 11.6mm,Micro-Vial,Vial ND9,32 x 11.6mm,transparent,32 x 11.6mm,32 x 11.6mm, with integrated 1st hydrol. class,with filling linestransparentclear glass,0.2ml Glasslabel stfilling lines1 hydrol. class Micro-Insert(amber)100 piecesper PE-Bag(amber)100 piecesper PE-Bag100 piecesper PP-Box(Silianized)100 piecesper PP-Box100 piecesper PP-Box1.5mlScrew Neck Vial,32 x 11.6mm,clear glass,1st hydrol. class,small openingLPPPackaging Unit100 piecesper PP-BoxLPP Art.-No.See ShimadzuLPP Art.Description11LPPPackaging Unit1.5ml1.5ml1.5ml0.1ml0.1ml1.1mlScrew Neck Vial, Screw Neck Vial, Screw Neck Vial, Screw Neck Vial, Micro-Insert,Micro-Insert,32 x 11.6mm,32 x 11.6mm,32 x 11.6mm,30 x 5mm,28 x 5mm,32 x 11.6mm,clear glass,amber glass,amber glass,clear glass,clear glass,clear glass,15mm top with assembled1st hydrol. class, 1st hydrol. class, 1st hydrol. class, 1st hydrol. class,plastic springsmall opening, small openingsmall opening,conicallabel label filling linesfilling lines10 x 100 pieces 10 x 100 pieces100 pieces100 pieces100 pieces100 piecesper PP-Boxper PP-Boxper PP-Boxper PP-Boxper PP-Boxper PP-Box12 21 1001Vial Rack, Acrylic, (173 x 95 x 20mm),50 cavities with a diameter of 12mm1 piece100 piecesper PP-BoxLPP Art.-No. 08 06 0005 11 06 0006 11 07 0002See ShimadzuLPP Art.DescriptionLPPPackaging Unit8mmCrimper11mmCrimper11mmDecapper1 pieceper PP-Box1 pieceper PP-Box1 pieceper PP-Box12

Werner Reifferscheidt GmbHTel.: ( 49) 24 23 / 94 31-0Fax: ( 49) 24 23 / 94 31-33 E-Mail: Service@La-Pha-Pack.comLa-Pha-Pack Werner Reifferscheidt GmbHConsumables forShimadzuAOC-20i, AOC-20s,AOC-17,AOC-14/1400,AOC-5000Any combination of 1.5ml vialswith appropriate seals of yourchoice can be suppliedas 2in1 KIT!Seals for Screw Neck ND13 (with assembled Septum)13mm PP Screw Cap, black, centre hole;Natural Rubber red-orange/TEF transp., 55 shore A, 1.3mm13mm PP Screw Cap, black, centre hole;Silicone dark blue/PTFE white, 45 shore A, 1.3mm13mm PP Screw Cap, black, centre hole;Silicone cream/PTFE red, 55 shore A, 1.5mm13mm PP Screw Cap, black, centre hole;Silicone white/PTFE blue, 60 shore A, 1.5mm, cross-slitted13mm PP Screw Cap, black, centre hole;PTFE red/Silicone white/PTFE red, 45 shore A, 1.0mm13 08 016612 02 016813mm PP Screw Cap, black, centre hole;12mm Septa: PTFE virginal, 53 shore D, 0.25mmFurther 13mm Srew Seals with different Septa resp. with closed top caps are available!09 15 098209 15 086709 15 117609 15 135609 15 0838Packaging Unit: 100 pieces per PE-Bag (Septa: 1000 pieces per PE-Bag)09 15 1178Seals for Screw Neck ND10 (with assembled Septa)09 15 133210mm PP Screw Cap black, centre hole; Natural Rubber red-orange/TEF transp., 55 shore A, 1.3mm10mm PP Screw Cap black, centre hole; Silicone white/PTFE beige, 45 shore A, 1.5mm10mm PP Screw Cap black, centre hole;Silicone white/PTFE red, 35 shore A, 1.3mm10mm PP Screw Cap black, centre hole; Silicone white/PTFE blue, 60 shore A, 1.5mm, slitted10mm PP Screw Cap black, centre hole; PTFE red/Silicone white/PTFE red, 45 shore A, 1.0mm10 08 074210 02 064610mm PP Screw Cap black, centre hole10mm Septa: PTFE virginal, 53 shore D, 0.25mmFurther 10mm Screw Seals with different Septa are available!09 15 086809 15 1177GC10 15 125610 15 074310 15 125710 15 132810 15 125809 15 148509 15 086909 15 1179Packaging Unit: 100 pieces per PE-Bag (Septa: 1000 pieces per PE-Bag)09 15 1.Seals for Crimp Neck ND11 (with assembled Septa)09 04 122011 03 024711 03 046411 03 019611 03 033911 03 031811 03 033211mm Alu. Crimp Cap, clear lacquered, centre hole; Natural Rubber red-orange/Butyl red/TEF transp.,45 shore A, 1.0mm11mm Alu. Crimp Cap, clear lacquered, centre hole; Silicone dark blue/PTFE white, 45 shore A, 1.3mm11mm Alu. Crimp Cap, clear lacquered, centre hole; Silicone blue transparent/PTFE white, 35 shore A,1.3mmSilicone white/PTFE red, 35 shore A,11mm Alu. Crimp Cap, clear lacquered, centre hole;1.3mm11mm Alu. Crimp Cap, clear lacquered, centre hole; Silicone white/PTFE blue, 60 shore A, 1.5mmcross-slitted11mm Alu. Crimp Cap, clear lacquered, centre hole; PTFE red/Silicone white/PTFE red, 45 shore A,1.0mm11mm Alu. Crimp Cap, clear lacquered, centre hole, PTFE virginal, 53 shore D, 0.25mmwith roll grove;11mm Magnetic Crimp Cap, gold, centre hole(for AOC-5000);11mm Magnetic Crimp Cap, gold, centre hole(for AOC-5000);AOC-20i, AOC-20s,AOC-17,AOC-14/1400,AOC-5000Short Thread Seals ND9 (with assembled Septa)13 15 045613 15 088713 15 081513 15 129313 15 029211 03 088511 03 0588Fax: ( 49) 24 23 / 94 31-33 E-Mail: Service@La-Pha-Pack.comConsumables forShimadzu11 03 0300Tel.: ( 49) 24 23 / 94 31-0Further 11mm Aluminium Crimp Seals with different Septaor with Crimp Caps in different colours are available!Packaging Unit: 100 pieces per PE-BagFurther 9mm Short Thread Seals with different Septa resp. withred, transparent, blue, green or yellow caps are available!Packaging Unit: 100 pieces per PE-BagSeals for Crimp Neck ND8 for AOC-5000 (with assembled Septa)08 03 08848mm Alu. Crimp Cap, clear lacq., centre hole; Silicone dark blue/PTFE white, 45 shore A, 1.3mm08 03 02498mm Alu. Crimp Cap, clear lacq., centre hole;08 03 115608 03 0113Silicone white/PTFE red, 35 shore A,1.3mmPTFE red/Silicone white/PTFE red, 45 shore A,1.0mm9mm PP Short Thread Cap, blue, centre hole; PTFE virginal , 53 shore D, 0.25mm9mm PP Short Thread Cap, blue, centre hole; Natural Rubber red-orange/TEF transp.,55 shore A, 1.0mm9mm PP Short Thr

La-Pha-Pack Werner Reifferscheidt GmbH Tel.: ( 49) 24 23 / 94 31-0 Fax: ( 49) 24 23 / 94 31-33 E-Mail: Service@L a-Pha-Pack.com 3 LC LC/MS See Shimadzu Art.-No. LPP Art.-Description LPP Packaging Unit 100 pieces per PP-Box 100 pieces per PP-Box 100 pieces per PP-Box 1.5ml Crimp Neck Vial, 32 x 11.6mm, clear glass, st 1 hydrol. class, wide opening