WIXLIB

BLACK MAXI-SHARP FILESThe Premium line of hand files! Specially treated with a black oxide coating,Simonds Black Maxi-Sharp Files last longer due to increased resistance toloading and rust.ALL PURPOSEThe built-in handle providesmaximum versatility for a widerange of applications. All-Purpose Filesfeature a double cut on one side and a single cuton the other side, have one edge cut and oneedge safe (uncut) for shoulder filing, andare parallel in width and thickness.FLATExcellent for “hogging” orrapid stock removal. Flat Filesare double cut on both sides, single cut onthe edges and taper toward the point in width.Simonds Flat Files feature the exclusive“wavy tooth” design.HALF ROUNDGreat for rounding out holes,corners and crevices. Half Round Filesare double cut on both sides. SimondsHalf Round Files feature a built-in “twist & roll”action on the half round side produced by theSimonds “spiral cut” design, and have theexclusive “wavy tooth” design on the flat side.KNIFEFor use on slots, keyways andacute angles. Knife Files aredouble cut on both sides, single cuton the “knife edge” with a safe (uncut)back and taper toward the point in width andthickness and feature the exclusive“wavy tooth” design.21-800-343-1616“/mmCode #8 / 20010 / 25078-18760078-188100Box Qty.1212“/mmBastardSmoothBox Qty.6 / 1508 / 20010 / 25012 / 30014 / stardSmoothBox Qty.6 / 1508 / 20010 / 25012 / 30014 / -31810078-32010078-32210012121266“/mmBastardBox Qty.6 / 1508 / 20010 / ernational.com

BLACK MAXI-SHARP FILES“/mmBastardSecond Cut6 / 1508 / 20010 / 25012 / 30014 / -14360078-14610078-148100Smooth Box �/mmBastardBox Qty.8 / 20010 / 25078-16060078-1611001212“/mmCode #Box Qty.8 / 20010 / 25078-24310078-2436001212“/mmCode #Box Qty.8 / 20010 / 25012 / 30078-32810078-32860078-32910012126“/mmType10 / 25010 / 25010 / 250MillFlatMulti-Kut FlatCode al.comBox Qty121212MILLExcellent for a wide range ofapplications such as sharpening,draw filing, lathe work and general shop use.Mill Files are single cut on the sides and edges,and taper toward the point in width.MILL—2 ROUND EDGESThe same as standard MillFiles, but have two round-cutedges and are parallel in widthand thickness (blunt). Bastard cut only.MULTI-KUT FLATObtain almost any requiredfinish simply by changing thefeed pressure. Multi-Kut Flat Files are singlecut coarse tooth files that taper toward the point inwidth. Simonds exclusive Multi-Kut design featuresa diamond pattern “double chip-breaker” allowing forfast stock removal while leaving a smooth finish.So versatile, the Simonds Multi-Kut combines theperformances of Flat and Mill Files.MULTI-KUT HALF ROUNDSuperb for rapid stock removal on flat orconcave surfaces, feature the Simonds exclusiveMulti-Kut design on the flat side, and have the“spiral cut” design on the half round side.PADDLE HANDLE FILESThe three most popular files(Mill, Flat, Multi-Kut Flat)now feature a built-in handlethat provides maximum versatility for a wide rangeof applications. Bastard cut only.1-800-343-16163

BLACK MAXI-SHARP FILESROUNDIntended for enlarging and rounding outcircular openings or concave surfaces. RoundFiles are double cut and taper toward the pointin width and thickness. (Round Files are oftenreferred to as “Rat Tail” Files.)TAPER SAWDesigned for filing all typesof saws with 60 angle teeth.Taper Saw Files are triangular in shape,have cut edges, and taper toward the pointin width and thickness.THREE SQUAREExcellent for cleaning outcorners or for use on cutters, taps and flatsurfaces. Three-Square Files are double cutand taper toward the point in width andthickness, and feature the exclusive“Wavy Tooth” design.“/mm6 / 1508 / 20010 / 25012 / 300“/mm6 / 1506 / 1506 / 1506 / 1507 / thBox Qty.78-39710078-3996001212126TypeCode #Box Qty.RegularSlimExtra SlimDouble Extra SlimDouble Extra 212121212“/mmBastardBox Qty.6 / 1508 / 20078-51660078-5181001212FILE-ALL A unique and convenient portable tool featuringa selection of three different files—Round, Mill,Square—in a case that becomes the handle when inuse. All with the exclusive Black Maxi-Sharp finish!SelectionFILE-ALL (Sleeved) BLACK MAXI-SHARP FILE KIT—5 PIECEFor general filing and finishing, one each of thefollowing in a convenient plastic sleeve:8” Mill Bastard, 8” Flat Multi-Kut , 8” Half RoundBastard, 8” Round Bastard, and 8” Square Bastard—all in the exclusive Black Maxi-Sharp finish!TypeBlack Maxi-Sharp Kit41-800-343-1616Code #Box Qty.72-7593201Code #Box Qty.78-75701012www.simondsinternational.com

AMERICAN PATTERN FILESMachinist Files, generally double-cut,are excellent for hogging (rapid stock removal) on all types of material.Saw Files, generally single-cut,are great for smoother finishes and best suited forsharpening saws or dressing edged tools.“/mmCode #Box Qty.8 / 20010 / 25073-18750073-1880001212“/mm6 / 1508 / 20010 / 25012 / 300“/mm6 / 1508 / 20010 / 25012 / 300“/mm1/8” x 6”5/32” x 6”3/16” x 8”7/32” x 8”1/4” x 8”5/16” x 8”3/8” x 8”* Made in PortugalCode #Box e #Box e 4151073-741810www.simondsinternational.comBox Qty.12*12*12*12*12*12*12ALL PURPOSEThe built-in handle providesmaximum versatility fora wide range of applications.All-Purpose Files feature a double cut on one side,a single cut on the other side, have one edge cut andone edge safe (uncut) for shoulder filing,and are parallel in width and thickness.ALUMINUM FLATAluminum Files havea coarse, fast cutting toothdesign that is very effective in eliminatingclogging. Developed for use on soft materials,such as aluminum, Aluminum Flat Files aredouble cut and taper toward the point in width.ALUMINUMHALF ROUNDThe half round shape withthe fast cutting tooth design is greatfor rounding out holes, corners and creviceson soft materials.CHAIN SAW ROUNDUsed for sharpening and maintainingproper tooth shape on chain saws.Round Chain Saw Files have a fast, smoothcutting action that leaves an excellent“keen” edge cutting finish.1-800-343-1616.5

AMERICAN PATTERN FILESFLATExcellent for “hogging” orrapid stock removal. Flat Filesare double cut on both sides,single cut on the edges and tapertoward the point in width. Simonds Flat Files featurethe exclusive ”wavy tooth” design.GULLET SPECIALDesigned for use on wide band saw bladesto “dress out” and maintain smooth round gulletsand eliminate crack-causing case hardening.Gullet Special Files are single cut and parallel inwidth and thickness.HALF ROUNDSuperb for rounding outholes, corners and crevices.Half Round Files are double cut on both sidesand feature a built-in “twist & roll” action onthe half round side produced by the Simonds“spiral cut” design and the exclusive “wavy tooth”design on the flat side.HALF ROUNDPIPELINERA 14” Half Round Fileused for filing weld beadsand scale off pipe.HANDGreat for work on highalloy tool steels. Hand Filesare double cut on both sides, have one edgecut and one edge safe (uncut) for shoulder filing,and are parallel in width and thickness.61-800-343-1616“/mmBastardSecond CutSmoothBox Qty.4 / 1006 / 1508 / 20010 / 25012 / 30014 / 23700073-2390001212121266“/mmCode #Box Qty.8 / 20010 / 25073-40950073-4100001212“/mmBastardSecond CutSmooth4 / 1006 / 1508 / 20010 / 25012 / 30014 / 32400073-326000Box Qty.1212121266“/mmCode #Box Qty.14 / 35073-7560606“/mmBastardSecond Cut6 / 1508 / 20010 / 25012 / -29800073-29950073-301000Smooth Box .simondsinternational.com

AMERICAN PATTERN FILES“/mmBastardSecond CutSmooth4 / 1006 / 1508 / 20010 / 0073-504000“/mmCode #10 / 25012 / 30014 / 35073-25550073-25600073-256500Box Qty.12121212Box Qty.1266“/mmBastardSecond Cut4 / 1006 / 1508 / 20010 / 25012 / 30014 / 0073-152000Smooth Box 3-1525001212121266“/mm1 Round Edge2 Round EdgesBox Qty.6 / 1508 / 20010 / 1212www.simondsinternational.comKNIFEFor use on slots, keywaysand acute angles. Knife Filesare double cut on both sides,single cut on the “knife edge” with a safe (uncut) backand taper toward the point in width and thickness.Simonds Knife Files feature the exclusive“wavy tooth” design.LONG ANGLE LATHEPrimarily for lathe work andbench filing. Long Angle LatheFiles are single cut with both edges safe(uncut) and taper toward the point in width.The teeth are designed on a “long angle”to provide free cutting and rapid filingwhile leaving a smooth finish.MILLExcellent for a wide rangeof applications such as sharpening,draw filing, lathe work and general shop use.Mill Files are single cut on the sides and edges,and taper towards the point in width.MILL—1 Round Edge2 Round EdgesSimilar to standard Mill Files but with one or tworounded edges. Round Edge Mill Files are single cuton the sides and edges, and are parallel in widthand thickness (blunt). Available in Bastard cut only.1-800-343-16167

AMERICAN PATTERN FILESMULTI-KUT FLATObtain almost any requiredfinish simply by changing the feedpressure. Multi-Kut Flat Files are single-cutcoarse tooth files that taper toward the point in width.Simonds exclusive Multi-Kut design features adiamond pattern “double chip-breaker” allowingfor fast stock removal while leaving a smooth finish.So versatile, the Simonds Multi-Kut combinesthe performances of Flat and Mill Files.MULTI-KUT HALF ROUNDSuperb for rapid stock removalon flat or concave surfaces. These Filesfeature the Simonds exclusive Multi-Kut designon the flat side with the “spiral cut” design on thehalf round side.PADDLEHANDLE FILESThe three most popular files(Mill, Flat, Multi-Kut Flat) now feature a built-inhandle that provides maximum versatility for a widerange of applications. Bastard cut only.ROUNDIntended for enlarging androunding out circular openings or concave surfaces.Round Files are double cut and taper toward the pointin width and thickness. (Round Files are often referredto as “Rat Tail” Files.)SAW BIT SPECIALIdeal for sharpeninginserted tooth circular woodsaw bits. Saw Bit Special Files are single cut,parallel in width and thickness, and havetwo round cut edges.81-800-343-1616“/mmCode #8 / 20010 / 25012 / 30014 / mCode #Box Qty.8 / 20010 / 25012 / 30073-32800073-32850073-32900012126“/mmType10 / 25010 / 25010 / 250MillFlatMulti-Kut FlatBox Qty.Code #Box Second CutSmoothBox Qty.4 / 1006 / 1508 / 20010 / 25012 / /mmCode #Box Qty.8 / 20073-22650012www.simondsinternational.com

AMERICAN PATTERN FILES“/mmBastardSecond Cut4 / 1006 / 1508 / 20010 / 25012 / 30014 / ypeSingle Cut6 / 1507 / 1788 / 20010 / 3-53150073-532000“/mmTypeSingle Cut4 / 1005 / 1256 / 1507 / 1788 / 20010 / 2504 / 1005 / 1256 / 1507 / 1788 / 2005 / 1256 / 1507 / 1788 / 200SlimSlimSlimSlimSlimSlimExtra SlimExtra SlimExtra SlimExtra SlimExtra SlimDouble Extra SlimDouble Extra SlimDouble Extra SlimDouble Extra 50073-56100073-56200073-56250073-563000Smooth Box Double Cut Box Qty.73-53250012121212TAPER SAWDesigned for filing all typesof saws with 60 angle teeth. Taper Saw Filesare triangular in shape, have cut edges, and tapertoward the point in width and thickness.REGULARDouble Cut Box dSecond CutSmoothBox Qty.6 / 1508 / 20010 / sinternational.comSQUARECreated for slots,keyways, square holes orgeneral surface filing. Square Files are double cutand taper toward the point in width and thickness,and feature the exclusive “wavy tooth” design.SLIMEXTRASLIMDOUBLEEXTRASLIMFiles Recommended for Various Point HandsawsPOINTS5678910111213,1415,16FILE7” Regular Taper7” or 8” Slim6” or 7” Slim6” Slim, 7” Extra Slim, 8” Double Extra Slim6” Extra Slim, 7” Double Extra Slim5” or 6” Extra Slim5” Extra Slim, 6” Double Extra Slim5” Extra Slim5” Double Extra Slim4” Double Extra SlimTHREE SQUAREExcellent for cleaning outcorners or for use on cutters,taps and flat surfaces. Three Square Filesare double cut and taper toward the point in widthand thickness, and feature the exclusive“wavy tooth” design.1-800-343-16169