Transcription
KT SeriesTemperature ControllerDownloaded from Arrow.com.
KT SeriesOverviewCommon FeaturesKT4HKT2KT4KT7A Multi-input: Versatile thermocouple, RTD, DC Current, DC VoltageA Control modes: PID, on/off control, Anti-Reset-Windup (ARW)A Control output: Relay, non-contact voltage output(for SSR drive, DC current output)A Accuracy: 0.2% spanA Simple operationA Heater-burn-out alarm availableA Alarm output with 9 different operation modesA RS485 ASCII/Modbus communication availableA Supply voltage: 24V AC/DC or 100 to 240V ACA Compliant with UL, CSA standards and CE markingMulti-input:KT8KT9AAAAThermocouples K, J, R, S, B, E, T, N, PL-II, C(W/Re5-26)RTD Pt100, JPt100, 3-conductor systemDC current 0/4 - 20mADC Voltage 0 to 1V, 0 to 5V, 1 to 5V, 0 to 10VApplication examples:Constanttemperature bathScrubberShrink wrappingmachineOvenWarm and coldstorage unitsOutput Methods:Output methodRelay contact outputVoltage output for SSR driveDC current output2Downloaded from Arrow.com.CharacteristicsRelay contact output is used for switching up to3A 250V AC (resistive load) in applications in whichthe on-off frequency is low.This voltage output is used for driving the SSR . Sincethe SSR is a semiconductor relay, contact life is long.This type is used in applications in which the on-offfrequency is high. Up to 40mA 12V DC can be switched.This current output is used to control a power regulator. Smooth and accurate control is possible becausephase control corresponds to the current output.
KT SeriesDisplay and OperationIndicators (backlight: orange)Lights up respectively when temperature unit F /C is selected.Light ups during serial communication (option) TX output.Lights up when control output is ON or Heating output (option) is ON.Switches the control output ON or OFF and selects Auto/Manual control.KT2 display and operation features:PV indicator SV indicator Autotuning indicator Indicator forserial comm.Out1 indicatorPV/SV display (switchable)MEMO/STEP display indicates memory numberduring fixed value control.Indicates step numberduring program control.Event1: Indicator for Alarm 1/2 or Control Out2Event2: Indicator for Alarm 1/23Downloaded from Arrow.com.
KT4HProduct TypesSpace saving, high performanceTemperature Controller KT4H 1/16 DIN size temperature controller Size 48 x 48 x 56mm (WxHxD) Panel-mounted type IP66 waterproof (frontside if panel mounted) 2nd optional alarm output Heating and cooling control with 2nd optionalcontrol output (non-contact voltage output) 11-segment display with 3 colours for PV 4 set values (externally selectable) Tool Port as standard MEWTOCOL communication Heater burnout alarm supports 3-phase heatersOrdering codeAKT4H1111001Power supply1 100 to 240V AC2 24V AC/DCSensor input1 multi-inputIn stock:A K T 4 H 1111 0 0A K T 4 H 11 2 1 0 0A K T 4 H 11 3 1 0 0A K T 4 H 2 111 0 0AKT4H212100AKT4H213100A K T 4 H 1111 0 0 1A K T 4 H 2 111 0 0 1other types on demandCommunicationfunctionblank not available1 RS4852 contact inputControl output1 relay2 non-contact voltage3 DC currentAlarm output1 alarm1 relay2 alarm1 andalarm2 relayHeater burnout alarm0 not available3 20A single phase4 50A single phase5 20A three phase6 50A three phaseHeating/Cooling control output0 no control output 21 relay2 non-contact voltage4Downloaded from Arrow.com.
KT4HNew Features of KT4H (in comparison with KT4)Better readabilityTime-proven display with negative LCD LED backlight11-segment LCD with improved readabilityLargest display of PV in its classPV indication in three different colourAlso, the 11-segmentLCD displays makes it easier to read alphanumeric charactersTheThe ability of the PV value to change color makes it easy todetermine the process status at a glance (three colour available).Improved control functionsFour setting values (SV) selectableusing external input (option).5Downloaded from Arrow.com.
KT4HNew Features of KT4H (in comparison with KT4)Improved communication functionsseveral KT4H to FP-Series PLCsMEWTOCOL communications protocol is built in. Up to 31 units can be connected and data can becollected using a FP (Sigma) PLC.Comes with MEWTOCOL. Collect data with the PLC.FP (Sigma)Standard external tool portTool Port of KT4HWith the external tool port, all settings can be loaded and made.USBPortAKT4H820Tool Port Converter CableKT Monitor SoftwareSpace savingsinchAbility to use any sensor (input) is inherited from KT SeriesThe KT4H comes equipped with the ability to use any sensorHigh accuracy and high sampling period also inherited from KT SeriesEasier operationThe switch layout has been changed so that mode changes can be executed more easily using the front keys.Protective construction6Downloaded from Arrow.com.
KT4HKT-Monitor SoftwareKT-Monitor is a convenient software tool for editing the parameters of KT4H, saving parameters in a file, monitoring of temperature data, and monitoring and saving log files ofdesignated values.KT-Monitor Main WindowParameters can easily be understood and are accessible in a clear, convenient form.Ordering information: KT-Monitor SetCD with Software, Manuals, Tool Port cable AKT4H820Requirements:PC with Windows 98/ME/2000 or XP, USB-Port, Tool cableAKT4H820, USB driver installed (included with KT-Monitor)7Downloaded from Arrow.com.
KT4HKT-Monitor SoftwareSampling and trend monitoring of PV, SV, MV1 and MV2KT-Monitor Trace displayWith the Trace display you can display and analyze the temperature PV, the set value SVand the control output MV. MV2 will be indicated only when Heating/Cooling control optionis added. All values can also be recorded into a CSV-File for later rework with e.g. Excel.The colours of the traces are selectable. The recording time interval is selectable(min. 1 sec.) and also the total number of records can be selected between 600 (10 min.)and 9000 (150 min.).For scaling of the displayed values, high and low limit values can be entered.8Downloaded from Arrow.com.
KT2Product TypesTi n y s i z e – p a t t e r n c o n t r o lTemperature Controller KT2 1/32 DIN size temperature controller Size 48 x 24 x 98.5mm (WxHxD) 9-step pattern control (ramp function) Panel-mounted type IP66 waterproof (front side if panel mounted) 2 set values possible (externally selectable) 2nd optional alarm output Heating and cooling control with 2nd optionalcontrol output (relay) Analogue value converter functionOrdering codeAKT21111001Power supply1 100 to 240V AC2 24V AC/DCSensor input1 multi-inputIn stock:A K T 2 111 2 0 0A K T 2 11 2 2 0 0A K T 2 11 3 2 0 0A K T 2 2 11 2 0 0AKT2212200A K T 2 1111 0 0 1AKT22120101AKT22121001RS485 interfaceblank not available1 availableControl output1 relay2 non-contact voltage3 DC currentAlarm output0 no alarm output1 1 alarm output*2 2 alarm outputs, 1 relay,1 open collector outputHeater burnout alarm0 not availableother types on demand* Type depends on other optionsHeating/Coolingcontrol output0 no control output 21 relay 3A 250V AC9Downloaded from Arrow.com.
KT4Product TypesSmall sized standard typeTemperature Controller KT4 1/16 DIN size temperature controller Size 48 x 48 x 95mm (WxHxD) Panel-mounted type IP66 waterproof (frontside if panel mounted) 2nd optional alarm output Heating and cooling control with 2nd optionalcontrol output (non-contact voltage output)Ordering codeAKT41111001Power supply1 100 to 240V AC2 24V AC/DCSensor input1 multi-inputIn stock:A K T 4 1111 0 0A K T 4 111 2 0 0A K T 4 11 2 1 0 0A K T 4 11 2 1 4 0A K T 4 11 3 1 0 0A K T 4 2 111 0 0A K T 4 2 111 4 0AKT4212100AKT4212140A K T 4 1111 0 0 1A K T 4 2 111 0 0 1other types on demand10Downloaded from Arrow.com.Communication functionblank not available1 RS485Control output1 relay2 non contact voltage3 DC currentHeater burnout alarm0 not available1 5A2 10A3 20A4 50AHeating/Cooling control output0 no control output 24 SSR output 0.3A 250V ACAlarm output1 alarm 1 relay2 alarm1 and alarm2relay
KT7Product TypesHandy and slimTemperature Controller KT7 Size 22.5 x 75 x 100mm (WxHxD) Front screw terminals DIN rail mounting type Analogue value converter functionOrdering codeAKT71111001Power Supply1 100 to 240V AC2 24V AC/DCSensor input1 multi-inputIn stock:A K T 7 1111 0 0A K T 7 11 2 1 0 0A K T 7 11 3 1 0 0A K T 7 2 111 0 0AKT7212100AKT7213100A K T 7 1111 0 0 1A K T 7 1111 0 0 1A K T 7 2 111 0 0 1AKT72121001other types on demandControl output1 relay2 non-contact voltage3 DC currentAlarm output0 alarm1 opencollectorCommunicationfunctionblank not available1 RS485Heater burnout alarm0 not available1 5A2 10A3 20A4 50AHeating/Cooling control output0 no control output 211Downloaded from Arrow.com.
KT8Product TypesWi d e v a r i e t y o f o p t i o n s , e a s i l y r e a d a b l e d i s p l a yTemperature Controller KT8 1/8 DIN size temperature controller Size 48 x 96 x 98.5mm (WxHxD) Panel-mounted type IP66 waterproof (front side if panel mounted) 2 set values possible (externally selectable) 2nd optional alarm output Heating and cooling control with 2nd optional controloutput (relay, non-contact voltage, or current) Ordering codeOrdering codeAKT81111001Power supply1 100 to 240V AC2 24V AC/DCSensor input1 multi-inputIn stock:Control output1 relayA K T 8 1111 0 02 non-contact voltageA K T 8 11 2 1 0 03 DC currentA K T 8 11 2 2 0 0AKT8212210Alarm outputA K T 8 11 2 2 0 0 10 alarm1 openAKT82122001collectorother types on demand2 alarm1 andalarm2 relayCommunicationfunctionblank not available1 RS485Heater burnout alarm0 not available1 5A2 10A3 20A4 50AHeating/Cooling control output0 no control output 21 relay2 non-contact voltage3 current output12Downloaded from Arrow.com.
KT9Product TypesBig displayTemperature Controller KT9 1/4 DIN size temperature controller Size 96 x 96 x 98.5mm (WxHxD) Panel-mounted type IP66 waterproof (front side if panel mounted) 2 set values possible (externally selectable) 2nd optional alarm output Heating and cooling control with 2nd optionalcontrol output (relay, non-contact voltage, or current) Ordering codeOrdering codeAKT91111001Power supply1 100 to 240V AC2 24V AC/DCSensor input1 multi-inputIn stock:A K T 9 1111 0 0A K T 9 11111 0A K T 9 11 2 1 0 0A K T 9 11 3 2 3 0AKT9212100AKT9212120A K T 9 1111 0 0 1A K T 9 2 111 0 0 1other types on demandControl output1 relay2 non-contact voltage3 DC currentAlarm output1 alarm1 opencollector2 alarm1 andalarm2 relayCommunicationfunctionblank not available1 RS485Heater burnout alarm0 not available1 5A2 10A3 20A4 50AHeating/Cooling control output0 no control output 21 relay2 non-contact voltage3 current output13Downloaded from Arrow.com.
KT SeriesRatings and SpecificationsSpecificationsDisplayKT2Size (W x H x D)KT448 x 24 x 98.5mmKT4HFrequencyPower consumptionApprox. V5AApprox. V8AApprox. 8VAInputeptyApprox. V8AApprox. 6VA–200 to 1370 CJ–200 to 1000 CRSBET0 to 1760 C0 to 1760 C0 to 1820 C–200 to 800 C–200.0 to 400.0 C –199.9 to 400.0 C–199.9 to 400.0 C–200 to 1300 C0 to 1390 C0 to 2315 CPt100DCVoltage50/60HzApprox. V8A–199.9 to 400.0 CNPL-IIC (W/Re5-26)DC CurrentKT7Input rangeKRTDKT948 x 96 x 98.5mm 96 x 96x 98.5mm22.5 x 75 x 100mm100 to 240V AC24V AC/DCSuplpy voltage (mustpecified)be sThermocoupleKT848 x 48 x 95mm 48 x 48 x 56mmJPt1003-conductor ysstem–199.9 to 850.0 C–200 to 850 C–200 to 850.0 C–199.9 to 850.0 C–199.9 to 500.0 C–200 to 500 C–200 to 500.0 C–199.9 to 500.0 C4 to 20mA DC 1)0 to 20mA DC 1)0 to 1V CD 2)0 to 10V DC 3)1 to 5V CD 3)–1999 to 9999, –199.9 to 999.9–19.99 to 99.99, –1.999 to 9.999–2000 to 10000–1999 to 9999, –199.9 to 999.9–19.99 to 99.99, –1.999 to 9.9990 to 5V CD 3) Scaling and change to the decimalointp posti ion sipossible for CD cur DC current inputsupportedisth wian externallymounted 50Relay contactControl outputNon-contactDC voltageDC current(Mustbespecified)Alarm output1Output MethodsControl modeAccuracySampling periodHysteresisProportional bandIntegral timeDerivative timeProportional cycleAllowable voltage fluctuationInsulated resistanceBreakdown voltageMalfunction vibration14Downloaded from Arrow.com.1a1a1b1a3A 250V AC (Restiveis load), 1A 250VWrent nad DC voltagenpui t.shunt resistor (soldes ratpay).el1a1bAC (Inductive ol ad cosØ 0.4),ectEl1a1b1aric life: 100,000 mesti12 20 14V DC; max., load current: 40mA (Short-circuit protected)4 to 20mADC Load resistance:x.550Ma WRelay contact 1a3A 250VAC (Restiveis oad)lOpen collector, Contr olElectric life: 100,000mesticapacity: 24V DC 0.1A(Max.)Actions mentioned below can beelesctedby key operation. [Default PID] PI D (with auto-tuning function),PI, PD (with manual reset function), P (with manual reset function), ON/OFF actionThermocouple: Within 0.2% of each input ps an 1 digit or within 2 C whichever isgreaterHowever, R and S input; within 6 C in the range of 0 to 200 CB input 0 to 300 C: Accuracy isnot guaranteed.K, J, E and N input el ss than 0 C: Within 0.4% of input ps an 1 digitRTD: Within 0.1% of each input ps an 1 digit or 1 C whichever is greaterDC current and DC voltage: Within 0.2% of each input ps an 1 digit250msThermocouple & RTD: 0.1 to 100.0 CDC current and DC voltage: 1 to 1000 (The decimal point place followsthe selection)Thermocouple: 0 to 1000 CRTD: 0.0 to 999.9 C0.0 to 110.0%DC current and DC voltage: 0.0 to 100.0%0 to 1000 es conds0 to 300 es conds1 to 120 es condsWhen 100 to 240V AC; 85 to 264V AC When 24V AC/DC; 20 to 28V AC/DC500V DC 10MW or greater1.5KV AC for 1See KT8/KT9min between inputterminal and powerterminal & betweenoutput terminaland power terminal1.5KV AC for 11.5kV AC for 1min between inputmin between input terminal and ground terminal,terminal and power between input terminal and powerterminal & between terminal between power terminalandoutput terminalground terminaland powerbetween output terminal and groundterminalterminal, & between output term inaland power terminal10 to 55Hz (0.35mm) to each direction (120ms sw eep) for 10min.1.5KV AC for 1 minbetween inputterminal and powerterminal & betweenoutput terminaland power terminal
KT SeriesRatings and SpecificationsDisplaySpecificationsKT2Breakdown vibrationMalfunction shockApprox. 120gWaterproofDisplay character heightAlarm output 2OptionsHeating/CoolingcontrolPV: 8.7mmSV: 8.7mm*0.1A 24V DCRelay contact:1a 3A 250V DC(Resistive load)NoneCommunicationfunctionTool PortKT8KT9Same as above, but 30G0 to 50 C35 to 85%RH (No condensation)Approx. 120gApprox. 130gApprox. 240gApprox. 370gIP66 (applicable only to the front panel subject to rubber gasket employed)PV: 12mmPV: 10.2mmPV: 11.2mmPV: 18mmSV: 6mmSV: 8.8mmSV: 11.2mmSV: 13.2 mmThe same as the one of Alarm output 1KT7Non contact relay0.3A 250V AC(Resistive load)Approx. 150gNonePV: 7.4mmSV: 7.4mmNone Relay contact 1a: 3A 250V AC Relay contact: 1a 250VAC 3A (Resistive load),(Resistive load)250V AC 1A (Inductive load cosø 0.4),Electric life: 100,000 timesElectric life: 100,000 timesNon contact voltage: Non-contact voltage: 12 – 14V DC max. 40mA12V DC 15% max. 40mA(Short-circuit protected)(Short circuit protected) DC current: 4 to 20mA DC Load resistance: Max. 550Heater rated current must be selected from 5A, 10A, 20A and 50ASetting accuracy: Within 5% of heater rated currentHeater burn-out alarmOutputKT4H10 to 55Hz (0.75mm) to each direction (120ms sweep) for 10min.X, Y & Z each direction for 5 times 10GBreakdown shockAmbient temperatureAmbient humidityMassKT4Relay contact 1a 250V AC 3A (Resistive load), Electric life: 100,000 timesNone.Open collector, Controlcapacity: 24V DC 0.1A (Max.)RS485 interface for multidrop communication (details see below)NoneNoneCommunication interfaceC-MOS level, cannot beused at the same time asserial communication (option).This port can only be usedwith the tool cable (AKT4H820).None*PV/SV switching display15Downloaded from Arrow.com.
KT SeriesCommunication Function OverviewCommunication via RS485 and Modbus (ASCII) or Modbus RTU protocolExample 1Multidrop communication with a programmable logical controller (PLC)FP PLCwith FPG-COM3 communication cassetteStandard ASCII or Modbus ASCII p to 31 units can KT8be connectedKT9KT710 to 55Hz (0.75mm) to each direction (120ms sweep) for 10min.X, Y & Z each direction for 5 times 10GSame as above, but 30G0 to 50 C35 to 85%RH (No condensation)Approx.Approx. 240gApprox. 370gPC130gRS-232 interfaceIP66 with(applicableonly to the front panel subject to rubber gasket employed)Example 2Multidrop communication with a personal computerDisplay character heightAlarm output 2PV: 7.4mmSV: 7.4mmThe same as the one of Alarm 485 Relay contact: 1a 250VAC 3A (Resistive load),250V AC 1A (Inductive load cosø 0.4),Electric life: 100,000 times Non-contact voltage: 12 – 14V DC max. 40mAKT4KT4 protected)(Short-circuit DC current: 4 to 20mA DC Load resistance: Max. 550OUT1OUT1OUT2OUT2SVSVA1A1A1Non contact relay0.3A 250V AC (Resistive load)RS232 – RS485e.g. rox. 150gNonePV: 10.2mmPV:ASCII11.2mmPV: 18mmStandard ASCII, Modbusor Modbus RTU protocolSV: 8.8mmSV: 11.2mmSV: 13.2 mmOUT2OptionsATSpecificationsKT4Breakdown vibrationMalfunction shockBreakdown shockAmbient temperatureAmbient XSV1ATMODEOUTOFFSV2TX/RXNoneATMODEOUTOFFHeater rated current must be selected from 5A, 10A, 20A and 50A.Heater burn-out alarmoutputUp to 31 unitscan be connectedSetting accuracy: Within 5% of heater rated currentWith the optional communication functionsettingsbe(Resistiveenteredor Electricchanged.Relay allcontact1a 250VcanAC 3Aload),life: 100,000 timesInput value (PV) and other parameters can be read easily.All commands are described in the KTC1E1 manual.Open collector, Controlcapacity: 24V DC 0.1A (Max.)Communication via MEWTOCOL (slave) with any FP-Series PLC*COMMUNICATION FUNCTION OVERVIEWItemCommunication typeCommunication speedSynchronization typeProtocolsCodingError correctingError detectionData structureInterfaceNo. of nodesMaximum cable lengthSpecificationHalf-duplexSelect 2400, 4800, 9600, or 19200 bps using key operation.AsynchronousStandard protocol (ASCII), Modbus (ASCII) or Modbus RTU mode (8-bit binary coding), KT4H also MEWTOCOL (Slave)ASCII/binaryCommand re-sendParity check, CRC-16 (RTU), LRC (ASCII)Start bit: 1Data bit: 7 (ASCII), 8 (RTU)Parity: Even, No, Odd (Selectable), KT2: Even (ASCII), None (RTU)Stop bit: 1/2RS485 compliant311,000 m (cable resistance must be within 50W )Note) That main setting no. 2 is not possible on the KT8 and KT9 when the communications functions are added.* Only for KT4H16Downloaded from Arrow.com.
KT2DimensionsKT2 Series (unit: mm) Panel cutout47.645 0.6022.2 0.3044.840Rubber packingMounting 6OFFKT24810.64898.5KT4 Series (unit: mm) Panel cutoutRubber gasketScrew type mounting7545 0.50PVOUT175OUT2SVEVTSV1SV2TX/RX59.7ATMODE45 0.5044.5A1OUT45 0.50OFFn x 48 – 3 0.50Lateral close mountingn: Number of units mountedKT4j 48Note) The communications terminal is the screw terminal on the backof the unit.9511.5KT4H Series (unit: mm) Panel cutoutRubber gasketMounting frameTerminal cover(Sold seperately)M3 Screw17Downloaded from Arrow.com.
KT SeriesDimensionsKT8 Series (unit: mm) Panel cutoutRubber gasketScrew type mounting7592 0.50PVSV13091SV1n x 48 – 3 0.5096SV2OUT1OUT2HBATTX/RXA1A2/LA106.292 0.50Lateral close mountingn: Number of units mountedOUTMODEOFF45 0.50KT811.5Note) The communications terminal is the screw terminal on the backof the unit.98.548KT9 Series (unit: mm) Panel cutoutRubber gasketScrew type mounting13092 0.80PVSV91SV1130n x 96 – 3 0.50SV2OUT1OUT2HBATTX/RXA1A2/LA106.2Lateral close mountingn: Number of units mountedOUTMODEk92 0.50OFFKT9k9611.598.5DIN rail mountingRecommended DIN rail: Part No. AT8DLA1Recommended fastening plate: Part No. ATA4806KT7 Series (unit: mm)123OUTEVTT/RNote) The communications terminal is the screw terminal on the backof the unit.4KT7DIN railATPVSV75MODEG/Tpv5678EVT100Note) The communications terminal is the modular jack onthe bottom of the unit.Downloaded from Arrow.com.Fastening plateDE5187ATMO9722.5KTT/Bav96789Note) The communications terminal is the modular jackon the bottom of the unit.
KT SeriesAccessoriesall units on thispage in mmAKT4811 for KT7Shunt resistor for current input (mA)AKT4810 for KT2, KT4, KT4H, KT8, KT926 174 6Terminal cover to protect rear side screw terminals from contactAKT4801 for KT4AKT8801 for KT8AKT9801 for KT99 8.4 75.69 8.4 75.619AKT4H801 for KT4H204044.547.544.58848 PC 92647.746.517AKT2801 for KT247.52022.32924.5623.83.515.5Current TransformerCT1 or CT2 for current detection is provided as an accessoryfor all types with heater burnout alarm function. They areenclosed for these types and need not be ordered separately.CT2 (for 50A)l30kCT1 (for 20A)l15k5.8 dia.7.50.51002.8KL254010.532112 dia.40104030152-M32-3.5 dia.30Tool cable to connect the KT4H's tool port to a PC's USB port.AKT4H820n2.5 Plug 3-Pole type2002050USB Plug35200019Downloaded from Arrow.com.
Global Network ServicesNorth AmericaEuropeAsia PacificChinaJapanPanasonic Electric WorksPlease contact our Global Sales Companies in:EuropeA HeadquartersA AustriaPanasonic Electric Works Europe AGPanasonic Electric Works Austria GmbHPEW Electronic Materials Europe GmbHA BeneluxPanasonic Electric WorksSales Western Europe B.V.A Czech Republic Panasonic Electric Works Czech s.r.o.Panasonic Electric WorksA FranceSales Western Europe B.V.PEW Electronic Materials France S.A.R.L.A GermanyPanasonic Electric Works Deutschland GmbHA IrelandPanasonic Electric Works UK Ltd.A ItalyPanasonic Electric Works Italia s.r.l.PEW Building Materials Europe s.r.l.A Nordic Countries Panasonic Electric Works Nordic ABPEW Fire & Security Technology Europe ABPanasonic Electric Works España S.A.A PortugalA SpainPanasonic Electric Works España S.A.A SwitzerlandPanasonic Electric Works Schweiz AGA United Kingdom Panasonic Electric Works UK Ltd.Rudolf-Diesel-Ring 2, 83607 Holzkirchen, Tel. (08024) 648-0, Fax (08024) 648-111, www.panasonic-electric-works.comJosef Madersperger Str. 2, 2362 Biedermannsdorf, Tel. (0 22 36) 2 68 46, Fax (0 22 36) 4 61 33, www.panasonic-electric-works.atEnnshafenstraße 30, 4470 Enns, Tel. (0 72 23) 8 83, Fax (0 72 23) 8 83 33, www.panasonic-electronic-materials.comDe Rijn 4, (Postbus 211), 5684 PJ Best, (5680 AE Best), Netherlands, Tel. (0499) 372727, Fax (0499) 372185, www.panasonic-electric-works.nlPrumyslová 1, 34815 Planá, Tel. 374 799 990, Fax 374 799 999, www.panasonic-electric-works.czFrench Branch Office, B.P. 44, 91371 Verrières le Buisson CEDEX, Tél. 01 60135757, Fax 01 60135758, www.panasonic-electric-works.fr26 Allée du Clos des Charmes, 77090 Collegien, Tél. 01 64622919, Fax 01 64622809, l-Ring 2, 83607 Holzkirchen, Tel. (08024) 648-0, Fax (08024) 648-555, www.panasonic-electric-works.deDublin, Tel. (01) 4600969, Fax (01) 4601131, www.panasonic-electric-works.co.ukVia del Commercio 3-5 (Z.I. Ferlina), 37012 Bussolengo (VR), Tel. (045) 6752711, Fax (045) 6700444, www.panasonic-electric-works.itViale Elvezia 18, 20154 Milano (MI), Tel. (02) 33604525, Fax (02) 33605053, n 10, 19272 Sollentuna, Sweden, Tel. (08) 59476680, Fax (08) 59476690, www.panasonic-electric-works.seCitadellsvägen 23, 21118 Malmö, Tel. (040) 6977000, Fax (040) 6977099, www.panasonic-fire-security.comPortuguese Branch Office, Avda Adelino Amaro da Costa 728 R/C J, 2750-277 Cascais, Tel. (21) 4812520, Fax (21) 4812529Barajas Park, San Severo 20, 28042 Madrid, Tel. (91) 3293875, Fax (91) 3292976, www.panasonic-electric-works.esGrundstrasse 8, 6343 Rotkreuz, Tel. (041) 7997050, Fax (041) 7997055, www.panasonic-electric-works.chSunrise Parkway, Linford Wood, Milton Keynes, MK14 6LF, Tel. (01908) 231555, Fax (01908) 231599, www.panasonic-electric-works.co.ukNorth & South AmericaA USAPEW Corporation of AmericaHead Office USA629 Central Avenue, New Providence, N.J. 07974, Tel. 1-908-464-3550, Fax 1-908-464-8513, www.pewa.panasonic.comAsia Pacific / China / JapanA ChinaA Hong KongA JapanA SingaporePanasonic Electric Works (China) Co., Ltd.Panasonic Electric Works(Hong Kong) Co., Ltd.Matsushita Electric Works, Ltd.Panasonic Electric Works Asia Pacific Pte. Ltd.2013, Beijing Fortune, Building No. 5, Dong San Huan Bei Lu, Chaoyang District, Beijing, Tel. (010) 6590-8646, Fax (010) 6590-8647Rm1601, 16/F, Tower 2, The Gateway, 25 Canton Road, Tsimshatsui, Kowloon, Hong Kong, Tel. (0852) 2956-3118, Fax (0852) 2956-03981048 Kadoma, Kadoma-shi, Osaka 571-8686, Japan, Tel. (06) 6908-1050, Fax (06) 6908-5781, www.mew.co.jp/e-acg/101 Thomson Road, #25-03/05, United Square, Singapore 307591, Tel. (06255) 5473, Fax (06253) 5689Copyright 2006 Printed in Germany6205 euen 06/06Downloaded from Arrow.com.
Heater burnout alarm supports 3-phase heaters AKT4H1 1 1 1001 Power supply 1 100 to 240V AC 2 24V AC/DC Sensor input 1 multi-input Control output 1 relay 2 non-contact voltage 3 DC current Alarm output 1 alarm1 relay 2 alarm1 and alarm2 relay Heating/Cooling control output 0 no control output 2 1 relay 2 non-contact voltage Heater burnout .
