Transcription
ConvertersIndraDrive CHCS02
2Bosch Rexroth AG Electric Drives and ControlsConvertersIndraDrive C n HCS02Documentation Application description Project planningmanual Continuous output from 1.5 kW to 11 kW Overload capacity 2.5x Firmware Maximum current from 12 A to 70 A Can be connected to inverters for cost-effective solutions Direct mains connection from 200 V to 500 VThe HCS02 converter from the IndraDrive C series integrates inverter and power supply in one unit. The compact construction contains additionalmains connection components, making it particularly suitable for single-axis applications.Technical .5112030Performance dataContinuous currentMaximum currentMotor ratedcapacity, typicalMains voltage1 AC200.250 V3 AC200.500 VTolerance[%] 10 %FrequencyFrequency toleranceContinuous current mains inputPower dependency from thesupply voltage50.60 Hz[Hz][A] 2 Hz613ULN 400 VULN 400 V1% power reduction per 4 V1% power gain per 5 VMains contactorExternalIntermediate circuitContinuous powerwith chokeMax. power withchokeContinuous powerwithout chokeMax. power without 14Electric Drives and Controls, PDF Version, Last Updated 2016-06-07, Bosch Rexroth AG, Subject to Change
Electric Drives and Controls Bosch Rexroth AGConvertersIndraDrive C n HCS02Switching frequency/max. output frequency4 kHz0 . 400 Hz8 kHz0 . 800 Hz12 kHz0.1200 Hz16 kHz0.1600 HzOutput voltage[V]Intermediate circuit capacityDC bus voltage[mF]3 x AC 0 V to mains connection voltage0.1350.27[V] DC0.540.675Mains connection voltage x 1.41Ability to combineconverter/inverterBrake chopper / resistor Braking resistanceInternalInternal/externalBrake chopperInternalBraking energy[kWs]consumptionContinuous brak- [kW]ing powerMaximum braking [kW]powerControl voltagePower consump- [W]tion without control unit and 423Overall protection categoryIP20EMCEN 61800-3 Cooling typeAir coolingNorms and StandardsCertificationEN 61800-3 EN 61800-5-1 UL 508 C C22.2 No. 14-05WeightWeight[kg]2.93.86.76.8All data for nominal rating at 3 AC 400 V mains voltage and 4 kHz switching frequencyDimensionsHCS02.1EW0012DimensionsHeight 070352Width B[mm]6565105105Depth T[mm]252252252252Electric Drives and Controls, PDF Version, Last Updated 2016-06-07, Bosch Rexroth AG, Subject to Change3
4Bosch Rexroth AG Electric Drives and ControlsConvertersIndraDrive C n HCS02ComponentsControl unitsDescriptionPageDetailsServo drivesFirmware 1GIndraDrive (MPH, MPB, MPD, MPC)Servo drivesFirmware 2GIndraDrive (MPE, MPB/MPM, MPC)Servo drivesControl units 1GIndraDrive (BASIC, ADVANCED)Servo drivesControl units 2GIndraDrive (ECONOMY, BASIC, ADVANCED)AccessoriesAuxiliary componentsDescriptionAccessoriesBrake unitsHLB01AccessoriesBrake resistorsHLR01AccessoriesMotor filtersHMF01AccessoriesMains chokesHNL01/02AccessoriesMains filterHNF01AccessoriesCapacity moduleHLC01All data for nominal rating at 3 AC 400 V mains voltage and 4 kHz switching frequencyElectric Drives and Controls, PDF Version, Last Updated 2016-06-07, Bosch Rexroth AG, Subject to Change
Bosch Rexroth AGPostfach 13 5797803 Lohr, GermanyBgm.-Dr.-Nebel-Str. 297816 Lohr, GermanyTel. 49 9352 18-0Fax 49 9352 18-8400www.boschrexroth.com/electricsLocal contact information can be found at:www.boschrexroth.com/adressen Bosch Rexroth AG 2012Subject to modification.Printed in GermanyThe data specified above only serve to describe the product.As our products are constantly being further developed, nostatements concerning a certain condition or suitability for a certainapplication can be derived from our information. The informationgiven does not release the user from the obligation of own judgmentand verification.It must be remembered that our products are subject to a naturalprocess of wear and aging.
Servo drives Firmware 2G IndraDrive (MPE, MPB/MPM, MPC) Servo drives Control units 1G IndraDrive (BASIC, ADVANCED) Servo drives Control units 2G IndraDrive (ECONOMY, BASIC, ADVANCED) Accessories Auxiliary components Description Accessories Brake units HLB01 Accessories Brake resistors HLR01 Accessories Motor filters HMF01 Accessories Mains .
