Transcription
FloEFD for CATIA V5Release HighlightsSoftware Version FEV2019.1.0March 2019Unpublished work. 2019 Mentor Graphics CorporationAll rights reserved.This document contains information that is confidential and proprietary to Mentor Graphics Corporation, SiemensProduct Lifecycle Management Software Inc., and their affiliates (collectively, “Siemens”). The original recipient of thisdocument may duplicate this document in whole or in part for internal business purposes only, provided that thisentire notice appears in all copies. In duplicating any part of this document, the recipient agrees to make everyreasonable effort to prevent the unauthorized use and distribution of the proprietary information.Note - Viewing PDF files within a web browser causes some links not to function.
This document is for information and instruction purposes. Siemens reserves the right to make changesin specifications and other information contained in this publication without prior notice, and the readershould, in all cases, consult Siemens to determine whether any changes have been made.The terms and conditions governing the sale and licensing of Siemens products are set forth in writtenagreements between Siemens and its customers. No representation or other affirmation of factcontained in this publication shall be deemed to be a warranty or give rise to any liability of Siemenswhatsoever.SIEMENS MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL INCLUDING,BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE.SIEMENS SHALL NOT BE LIABLE FOR ANY INCIDENTAL, DIRECT, INDIRECT, SPECIAL, ORCONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO LOST PROFITS)ARISING OUT OF OR RELATED TO THIS PUBLICATION OR THE INFORMATION CONTAINED INIT, EVEN IF SIEMENS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.U.S. GOVERNMENT LICENSE RIGHTS: The software and documentation were developed entirely atprivate expense and are commercial computer software and commercial computer softwaredocumentation within the meaning of the applicable acquisition regulations. Accordingly, pursuant toFAR 48 CFR 12.212 and DFARS 48 CFR 227.7202, use, duplication and disclosure by or for the U.S.Government or a U.S. Government subcontractor is subject solely to the terms and conditions set forthin the license agreement provided with the software, except for provisions which are contrary toapplicable mandatory federal laws.TRADEMARKS: The trademarks, logos and service marks ("Marks") used herein are the property ofSiemens or other parties. No one is permitted to use these Marks without the prior written consent ofSiemens or the owner of the Mark, as applicable. The use herein of a third- party Mark is not an attemptto indicate Siemens as a source of a product, but is intended to indicate a product from, or associatedwith, a particular third party. The registered trademark Linux is used pursuant to a sublicense from LMI, the exclusive licensee ofLinus Torvalds, owner of the mark on a world-wide basis.2FloEFD for CATIA V5 Release Highlights, FEV2019.1.0March 2019Note - Viewing PDF files within a web browser causes some links not to function.
IntroductionThis document provides a high-level summary of this release. It includes a summary of the newfeatures in this release, any authorization code changes required, any major installationchanges, and any transitioning issues you should be aware of before installing. Additionally,any last minute issues found in the final stages of testing are included.New FeaturesThe following new features are available in this release. Fan derating. Fans are often set to run below their maximum capacity, to reduce noiseand increase their lifetime, but still achieve thermal cooling requirements. Fans are runat less than maximum capacity by reducing the RPM that they operate at. This has theeffect of derating (reducing) the fan curve and is simulated using the Derating factor.Logical Expressions in Formula Dependency. Boundary conditions can be dependenton coordinates, time and monitor parameters such as goals. It is now possible to definesophisticated dependencies using conditional and Boolean expressions such as IF,AND, OR, XOR, NOT, (more than), (less than), (equal two). For example, youcan easily set a value of a heat source dependent on two different temperature sensors(defined as temperature goals) so that the dissipated power is downgraded dependingon the temperature at either one or another sensor.Altitude. The atmospheric pressure and temperature can be defined by setting theAltitude. Using the Altitude it is now much easier to conduct what-if or optimizationanalysis.Additional Rays for Radiation Sources. You can now add additional rays launchedfrom a radiation source (for Monte Carlo radiation only). This allows for betterresolution of radiation or light locally without significant increasing the total number ofrays and therefore saving the calculation time. In addition, radiation freezing can beenabled automatically.Network Assembly. Node power can now be dependent on Temperature.Authorization CodesNo changes to authorization codes are required for this release. You may request your existingauthorization codes by opening a non-technical Service Request on Support Center.https://support.mentor.comFor additional information on licensing, refer to the Mentor Graphics Standard Licensingmanual.Note - Viewing PDF files within a web browser causes some links not to function.
Installation InformationFor additional information on installation, refer to Installation Instructions manual and the helpsystem within the installation software. You can view this manual in the Manual directory atthe top level of the DVD.LicensingThis release uses the Mentor Graphics Standard Licensing v2018 1 (patch 2). If you usefloating licenses, you will need to update the license server accordingly. If you see an errormessage that says vendor daemon is too old, that is usually an indicator that the license serverneeds to be updated to run this version of the client software. For additional information onlicensing, refer to the Mentor Graphics Standard Licensing Manual.Support InformationIf you have questions about this software release, please log in to Support Center. You maysearch thousands of technical solutions, view documentation, or open a Service Request here:https://support.mentor.com/If your site is under a current support contract but you do not have a Support Center login,register today:https://support.mentor.com/register4FloEFD for CATIA V5 Release Highlights, FEV2019.1.0March 2019Note - Viewing PDF files within a web browser causes some links not to function.
Supported Platform Microsoft Windows 7 Professional, Ultimate or Enterprise 64-bit edition,Windows 8, Pro or Enterprise 64-bit,Windows 10 Pro or Enterprise 64-bit (tested with v1803) For solver: Microsoft Windows 2012 Server x64, Windows 2012 Server R2 x64, LinuxRHEL 6.6, RHEL 7.3, Windows Server 2016 with HPC Pack 2016, Linux SUSE SLES11 SP3, SUSE SLES 12 SP0 Microsoft Office 2013; Microsoft Office 2010; Microsoft Office 2007 Microsoft Windows Media Player 7.0 or higher CATIA V5 R19 (recommended SP9)CATIA V5 R20 (recommended SP7)CATIA V5 R21 (recommended SP6)CATIA V5-6 2012 (R22) (recommended SP6)CATIA V5-6 2013 (R23) (recommended SP6)CATIA V5-6 2014 (R24) (recommended SP7)CATIA V5-6 2015 (R25) (recommended SP6)CATIA V5-6 2016 (R26) (recommended SP6)CATIA V5-6 2017 (R27) (recommended SP4)CATIA V5-6 2018 (R28) (recommended SP0) Ethernet network adapter Mouse or other pointing device DVD-ROM drive 4 GB RAM minimum, more recommended 1 GB of free hard disk space, more required for simulation modelsNote - Viewing PDF files within a web browser causes some links not to function.
For solver: Microsoft Windows 2012 Server x64, Windows 2012 Server R2 x64, Linux RHEL 6.6, RHEL 7.3, Windows Server 2016 with HPC Pack 2016, Linux SUSE SLES 11 SP3, SUSE SLES 12 SP0 Microsoft Office 2013; Microsoft Office 2010; Microsoft Office 2007 Microsoft Windows Media Player 7.0 or higher CATIA V5 R19 (recommended SP9)
