WIXLIB

Safety PrecautionsOperating InsInstructionsInstallation InstructionsCareCCleaningare and CleaTroubleshooting TipsTroubleshootRemote Control OperatingInstructionsUSER MANUALPortable TypeRoom Air RAC-PD1411CRURAC-PD1411CWURAC-PD1411HRUversion B - 10 - 2017Warning notices: Before using this product,please read this manual carefully and keepit for future reference.The design and specifications are subject tochange without prior notice for productimprovement. Consult with your dealer ormanufacturer for details.us.toshiba-lifestyle.com

User ManualSafety Precautions . 3Operating Instructions . 5Installation Instructions . 11Care and Cleaning . 16Troubleshooting Tips . 17Remote Control Operating Instructions . 18Read This ManualInside you’ll find many helpful hints on how to use and maintain your air conditioner properly.Just a little preventive care on your part can save you a great deal of time and moneyover the life of your air conditioner. You’ll find many answers to common problems in thetroubleshooting tips - you should be able to fix most of them quickly before calling service.These instructions may not cover every possible condition of use, so common sense andattention to safety is required when installing, operating and maintaining this product.CAUTIONPage 2 Contact the authorized service technician for repair or maintenance of this unit. Contact the installer for installation of this unit. The air conditioner is not intended for use by young children or people who cannotoperate the air conditioning independently without supervision. Young children should be supervised to ensure that they do not play with the airconditioner. If the power cord needs to be replaced, please contact our consumer service and lookfor an authorized technician. Electrical installation must be performed in accordance to national regulation standardsby qualified personnel only.User Manual

SAFETY PRECAUTIONSWARNING: This symbol indicates the possibility of death or serious injury.CAUTION: This symbol indicates the possibility of injury or damage to property.WARNINGPlease read through these instructions before you start the installation process.Improper installation can cause damage to the unit, your personal property, and alsoposes a personal safety hazard. Installation must be performed according to the installation instructions. Improperinstallation can cause water leakage, electrical shock, or fire. Use only the included accessories and parts, and specified tools for the installation.Using non-standard parts can cause water leakage, electrical shock, fire, and injury orproperty damage. Make sure that the outlet you are using is grounded and has the appropriate voltage.The power cord is equipped with a three-prong grounding plug to protect againstshock. Voltage information can be found on the side of the unit, behind the grille. Install the unit on a flat, sturdy surface. Failure to do so could result in damage orexcessive noise and vibration. The unit must be kept free from obstruction to ensure proper functioning and tomitigate safety hazards. DO NOT modify the length of the power cord or use an extension cord to power theunit. DO NOT share a single outlet with other electrical appliances. Improper powersupply can cause fire or electrical shock. DO NOT install your air conditioner in a wet room such as a bathroom or laundry room.Exposure to water can cause electrical components to short circuit. DO NOT install the unit in a location that may be exposed to combustible gas, as thiscould cause fire. The unit has wheels to facilitate moving. Do not attempt to roll the unit across thickcarpet or over objects, as this could cause the unit to tip over. DO NOT operate a unit that has been dropped or damaged. Only use the included accessories and specified parts for installation. Usingnonstandard parts can cause water leakage, electrical shock, fire, and injury orproperty damage.User ManualPage 3SafetyPrecautionsTo prevent injury to the user or other people and property damage, the following instructions mustbe followed. Incorrect operation due to ignoring of instructions may cause harm or damage. Theseriousness is classified by the following indications.

WARNING DO NOT allow children to play with the air conditioner. Children must be supervisedaround the unit at all times.SafetyPrecautions If the air conditioner is knocked over during use, turn off the unit and unplug itfrom the main power supply immediately. Visually inspect the unit to ensure thereis no damage. If you suspect the unit has been damaged, contact a technician orcustomer service for assistance. In a thunderstorm, the unit should be turned off to avoid damage to the machinedue to lightning.CAUTION This appliance is not intended for use by persons (including children) with reducedphysical, sensory or mental capabilities or lack of experience and knowledge, unlessthey have been given supervision or instruction concerning use of the appliance bya person responsible for their safety. If the power cord is damaged, it must be replaced by the manufacturer, its serviceagent or similarly qualified persons in order to avoid a hazard. Prior to cleaning or other maintenance, the appliance must be disconnected from thesupply mains. Do not install the appliance in a location that may be exposed to combustible gas. Ifcombustible gas accumulates around the unit, it may cause fire. Do not run the power cord under carpeting. Do not cover cord with throw rugs,runners, or similar coverings. Do not route cord under furniture or appliances.Arrange cord away from traffic area and where it will not be tripped over. To reduce the risk of fire or electric shock, do not use this air conditioner with anysolid-state speed control device. The appliance shall be installed in accordance with national wiring regulations. Contact the authorized service technician for repair or maintenance of this unit. Contact the authorized installer for installation of this unit. When there are significant differences between features or operation implied by theremote control illustration and the actual functions described in the USER MANUAL,the descriptions in the USER MANUAL shall prevail. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc.)batteries.Page 4User Manual

OPERATING INSTRUCTIONSPreparationcontrol panelhorizontal louverblade(automatic swing)handleupper air filter(behind the grille)OperatingInstructions(both sides)upper air intakePaneldrain outletair outletlower air filterlower air intakedrain outlet(only for pumpheating mode)power cord outletpower cord buckleCasterFrontpower plug socketbottom traydrain outletRearDesign and Compliance NotesDesign Notice:In order to ensure the optimal performance of our products, the design specifications of the unit andremote control are subject to change without prior notice.Energy Rating Information:The Energy Rating for this unit is based on an installation using an unextended exhaust duct withoutadaptors A or B (as shown in the Installation section of this manual).Unit Temperature Range:ModeTemperature RangeCool17 C 35 C (62 F 95 F)Dry13 C 35 C (55 F 95 F)Heat (heat pump mode)Heat (electrical heat mode)5 C 30 C (41 F 86 F) 30 C (86 F)Exhaust Hose Installation:The exhaust hose and adaptor must be installed or removed in accordance with the usage mode.For COOL, HEAT (heat pump type) or AUTO mode, exhaust hose must be installed.For FAN, DEHUMIDIFY or HEAT (electrical heat type) exhaust hose must be removed.User ManualPage 5

Control Panel FeaturesLED DisplayWi-Fi Indicator Light(Wi-Fi models only)Operatingand Features InstructionsSwingButtonTimerButtonModeButtonUp () and Down (Buttons)FanButtonSleep/EcoButtonPowerButtonSwing ButtonMode buttonUsed to initiate the Auto Swing feature. When theoperation is ON, pressing the SWING button canstop the louver at the desired angle.Selects the desired operating mode. Each timeyou press the button, a mode is selected in asequence that goes from AUTO, COOL, DRY,FAN and HEAT (cooling only models excluded).The mode light illuminates and indicates theselected mode.Timer buttonUsed to initiate the AUTO ON start time andAUTO OFF stop time program, in conjuction withthe Up ( ) and Down ( ) buttons. The timeron or off light will illuminate depending on theselected setting.Fan buttonControls the fan speed. Press to control the fanspeed in four steps - LOW, MID, HIGH and AUTO.The selected fan speed light (except AUTO) willilluminate. When AUTO is selected, no lights willilluminate.NOTEPress the FAN button for 3 seconds to initiatethe ION feature, which helps remove pollenand impurities from the air, and trap them inthe filter. Press it for 3 seconds again to turnoff the ION feature.Page 6Up () and Down () buttonsUsed to adjust (increasing/decreasing)temperature settings in 1 C/1 F increments ina range of 17 C/62 F to 30 C/86 F or the TIMERsetting in a range of 0 24hrs.NOTEThe control is capable of displayingtemperature in degrees Fahrenheit ordegrees Celsius. To convert from one tothe other, press and hold the Up and Downbuttons at the same time for 3 seconds.Power buttonPower switch on/off.Sleep (Eco)/Filter buttonUsed to initiate the SLEEP/ECO operation.User Manual

Control Panel Features (cont.)Wi-Fi Indicator Light(Wi-Fi models only)LED ModeButtonUp () and Down (Buttons)FanButtonSleep/EcoButtonPowerButtonWI-FI FunctionLED display(Available on Wi-Fi models only)Shows the set temperature in C (Degrees Celsius)or F (Degrees Fahrenheit) and the Auto-timersettings. While on DRY and FAN modes, it showsthe room temperature.With the unit ON, press the VENT ANGLE/SWING button for 3 seconds to initiate theWireless Connection mode. The LED displaywill display “AP” to indicate the wireless accesspoint is available. Follow the instructions on theWi-Fi setup manual and the latest app versionavailable for your phone operating system. Ifthe connection is successful, the unit will exit“AP” mode automatically and the Wi-Fi indicatorlight will illuminate. If connection is unsuccessfulwithin 8 minutes, the unit exits “AP” mode andreturns to regular operation.If the Wi-Fi function is ON and there is a need toturn it off, press and hold the VENT ANGLE/SWINGbutton and DOWN (-) button simultaneouslyfor 3 seconds. The display will show “OFF” for3 seconds and the Wi-Fi function will becomeinactive. To turn it back on, press and hold theVENT ANGLE/SWING button and UP ( ) buttonsimultaneously for 3 seconds. The display willshow “ON” for 3 seconds. When you restart thewireless functions, it will take a period of time toconnect to the network automatically. Always besure your wireless connection is working properlyand there is a valid internet connection for Wi-Fifunctionality to work.User ManualShows Error codes and protection code:E1 - Room temperature sensor error.E2 - Evaporator temperature sensor error.E3 - Condenser temperature sensor error (selectmodels).E4 - Display panel communication error.P1 - Bottom tray is full - Connect the drainhose and drain the collected water away.If protection code repeats, call for service.NOTEWhen one of the above malfunctionsoccurs, turn off the unit and check forany obstructions. Restart the Unit. If themalfunction persists, turn off the unitand unplug the power cord. Contact themanufacturer or its service agents or a similarqualified person for service.Page 7