Transcription
Preface1OverviewSIMATICIndustrial PCSIMATIC IPC647DOperating Instructions2Safety InstructionsInstalling and connecting the3device4Commissioning the device5Extended device functionsExpanding and assigning6parameters to the deviceDevice maintenance and7repair8Technical specificationsIMPORTANT: Updated9information for IPC647DATechnical supportBAbbreviations03/2018A5E32996306-AC
Legal informationWarning notice systemThis manual contains notices you have to observe in order to ensure your personal safety, as well as to preventdamage to property. The notices referring to your personal safety are highlighted in the manual by a safety alertsymbol, notices referring only to property damage have no safety alert symbol. These notices shown below aregraded according to the degree of danger.DANGERindicates that death or severe personal injury will result if proper precautions are not taken.WARNINGindicates that death or severe personal injury may result if proper precautions are not taken.CAUTIONindicates that minor personal injury can result if proper precautions are not taken.NOTICEindicates that property damage can result if proper precautions are not taken.If more than one degree of danger is present, the warning notice representing the highest degree of danger willbe used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating toproperty damage.Qualified PersonnelThe product/system described in this documentation may be operated only by personnel qualified for the specifictask in accordance with the relevant documentation, in particular its warning notices and safety instructions.Qualified personnel are those who, based on their training and experience, are capable of identifying risks andavoiding potential hazards when working with these products/systems.Proper use of Siemens productsNote the following:WARNINGSiemens products may only be used for the applications described in the catalog and in the relevant technicaldocumentation. If products and components from other manufacturers are used, these must be recommendedor approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation andmaintenance are required to ensure that the products operate safely and without any problems. The permissibleambient conditions must be complied with. The information in the relevant documentation must be observed.TrademarksAll names identified by are registered trademarks of Siemens AG. The remaining trademarks in this publicationmay be trademarks whose use by third parties for their own purposes could violate the rights of the owner.Disclaimer of LiabilityWe have reviewed the contents of this publication to ensure consistency with the hardware and softwaredescribed. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, theinformation in this publication is reviewed regularly and any necessary corrections are included in subsequenteditions.Siemens AGDivision Digital FactoryPostfach 48 4890026 NÜRNBERGGERMANYA5E32996306-AC 01/2018 Subject to changeCopyright Siemens AG 2018.All rights reserved
PrefaceThese operating instructions contain all the information you need for commissioning andoperation of the SIMATIC IPC647D .It is intended both for programming and testing personnel who commission the device andconnect it with other units (automation systems, programming devices), as well as for serviceand maintenance personnel who install add-ons or carry out fault/error analyses.Basic knowledge requiredA solid background in personal computers and Microsoft operating systems is required tounderstand this manual. General knowledge in the field automation control engineering isrecommended.Validity of the Operating InstructionsThese operating instructions are valid for all supplied versions of the SIMATIC IPC647D.Scope of this documentationThe documentation for the SIMATIC IPC647D includes: Product Information "Important notes on your device" Quick Install Guide SIMATIC IPC647D SIMATIC IPC647D operating instructions in English and GermanThe documentation is part of the "Documentation and Drivers" DVD supplied with theproduct.Refer to the corresponding user documentation for information and instructions on usingsoftware.ConventionsThe terms "PC" or "device" are sometimes used in place of the product nameSIMATIC IPC647D in these operating instructions.HistoryCurrently released versions of these operating instructions:VersionComments01/2014First edition01/2015Second edition, amendments: Windows Server 2012 R2, devices with RAIDhardwareSIMATIC IPC647DOperating Instructions, 03/2018, A5E32996306-AC3
PrefaceSIMATIC IPC647D4Operating Instructions, 03/2018, A5E32996306-AC
Table of contentsPreface . 3123Overview. 111.11.1.11.1.21.1.31.1.4Product description .11Scope of application.11Highlights .12Function .13Features .141.21.2.11.2.21.2.3Design of the device .19Device views .19Interfaces .21Status displays .221.3Accessories .26Safety Instructions . 292.1General safety instructions .292.2Notes on use .342.3Ambient and environmental conditions .35Installing and connecting the device . 373.13.1.13.1.23.1.3Preparing for installation .37Checking the delivery package .37Identification data of the device .39Permitted mounting positions .403.23.2.1Mounting the device .41Installation 3.3.4.33.3.53.3.63.3.6.13.3.6.23.3.7Connecting the device .43Connection information .43Connection of equipotential bonding .45Connecting peripheral equipment .46Connecting the power supply .47Information about the power supply .47Connecting an AC power supply .48Connecting a redundant power supply .49Connecting the device to networks .51Securing the lines .54Network and fieldbus cables .54COM, DP, DVI/VGA, PS/2 and audio lines .56Multi-monitoring .56SIMATIC IPC647DOperating Instructions, 03/2018, A5E32996306-AC5
Table of contents456Commissioning the device . 574.1General information on commissioning . 574.2Switching on the device . 584.3Automatic switching on of the device . 3Notes on different device configurations . 60Opening the front door . 60DVD burner drive . 60Hard disks in removable rack. 62System with two drives . 63RAID systems . 64Manage RAID system . 64RAID1 system . 65Hardware RAID system . 664.5Windows Action Center . 684.6Switching off the device . 69Extended device functions . 715.15.1.15.1.25.1.35.1.45.1.55.1.6Monitoring functions . 71Overview of the monitoring functions . 71Temperature monitoring/display . 72Watchdog (WD) with LED . 73Fan monitoring . 74Battery monitoring . 74Drive monitoring . 745.2Active Management Technology (AMT) . 755.3Trusted Platform Module (TPM) . 76Expanding and assigning parameters to the device . 776.1Retrofitting instructions . 776.2Removing the front panel . 806.3Open the device. . 816.4Removing and installing memory modules . nsion cards. 86Notes on the expansion cards . 86Removing and installing bus frame . 88Removing and installing expansion cards . 90Removing and installing the Hardware RAID adapter card . 93Requirement. 93Procedure. 96Configuring the Hardware RAID adapter card . 986.66.6.16.6.26.6.36.6.46.6.5Drives and storage media . 100Overview . 100Removing and installing drive cage . 102Removing and installing drive fans . 104Removing and inserting the tray from the removable drive bays . 106Removing and installing the hard disk drive from a tray . 108SIMATIC IPC647D6Operating Instructions, 03/2018, A5E32996306-AC
Table of contents6.6.66.6.76.6.86.6.8.16.6.8.27Removing and installing a drive from a drive cage .109Replacing a defective hard disk drive in the RAID system .110Removing and installing an SSD .112Removing and installing an SSD from a tray .112Removing and installing an SSD with mounting plate from a drive cage .113Device maintenance and repair . 1157.1Repair information.1157.27.2.17.2.2Maintenance .117Maintenance intervals .117Changing the filter pad .1177.37.3.17.3.27.3.37.3.47.3.57.3.6Manage onboard RAID system .119Example for a RAID1 system during the boot phase of the system .119RAID software .120Checking the status of the RAID system .121Displaying a defective hard disk of a RAID system in the RAID software .122Special feature: Replacing hard disk in the RAID system when switched off .122Integrating a new hard disk drive in the RAID system .1237.47.4.1Managing the Hardware RAID system .125Calling Adaptec maxView Storage Manager .97.5.10Removing and installing hardware.126Replacing device fans .126Replacing the backup battery .128Replace AC power supply .130Replacing the redundant power supply module .132Replacing the redundant power supply completely .133Removing and installing the piggyback and bus board .135Removing the OP.137Removing and installing the processor cooler .139Removing the motherboard .142Replacing the processor .97.6.10Installing the software .148Sources for installation of the operating system .148Updating the operating system .148Insta
Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. The permissible ambient conditions must be complied with. The information in the relevant documentation must be observed. . 7.4.1 Cal
