Transcription
User’s GuideXDS-PRO Satellite ReceiversXDS-PRO SERIES (PRO1Q, PRO4Q, PRO1R, PRO4R)Visit Our Website www.picodigital.comContact Us 858.546.5050Toll Free 858.421.6511
XDS-PRO Satellite ReceiversImportant NoticesCopyright 2017 Pico Digital, Inc.All rights reserved. No part of this document may be reproduced or transmitted in any form or by anymeans, electronic or mechanical, including but not limited to photocopying, recording, or by anyinformation storage and retrieval system without the prior written permission from Pico Digital, Inc.Acknowledge of TrademarksAny product or corporate names used herein may be trademarks or registered trademarks, and are onlyused for identification and explanation, without intent to infringe. Any terms mentioned or used that areknown trademarks or service marks have been appropriately capitalized and italicized. Pico Digital cannotattest to the accuracy of this information. Use of a term in this document should not be regarded asaffecting the validity of any trademark or service mark.HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and ForeignPatents. HD Radio and the HD, HD Radio, and “Arc” logos are proprietary trademarks of iBiquity DigitalCorp.DisclaimerThis document is intended to provide information about the “XDS-PRO DVB Satellite Receiver”. Everyeffort has been made to make this document as complete and accurate as possible, but no warranty orfitness is implied. The information is provided on an “as is” basis and Pico Digital shall have neitherliability nor responsibility to any person or entity with respect to any loss or damages arising from theinformation contained in this document.Printed in the United States of AmericaPico Digital, Inc.8880 Rehco Rd.San Diego, CA 92121Patent PendingPico Digital, Inc., XDS-PRO DVB Satellite Receiver – Patents Pending2www.picodigital.comR830001-2001, REV. CTOLL FREE 800.421.6511
XDS-PRO Satellite ReceiversDocument Revision HistoryRevisionDateA10/11/11Initial release for PRO1Q and PRO4Q models, Firmware v0.0.61514B1/19/17Revised to include PRO1R and PRO4R models, and to updatethe website and NMS sections. Also added proper logos andacknowledgements for HD Radio support.2120C8/17/17Removed “User” and “Guest” login R830001-2001, REV. CTOLL FREE 800.421.6511
XDS-PRO Satellite ReceiversTABLE OF CONTENTSImportant Notices . 212INTRODUCTION . 71.1Important Information. 71.2Hardware Upgradeability . 71.3Hardware Versatility . 71.4Network Management System . 7GETTING STARTED . 82.1Unpacking the Receiver . 82.1.12.2List of Contents . 8Safety Precautions . 82.2.1Excessive Temperature . 82.2.2Proper Ventilation . 82.2.3Heat, Humidity, and Dust . 92.2.4Power Cord Cabling . 92.2.5Reliable Earthing . 92.2.6Circuit Overloading . 92.2.7Foreign Objects . 92.3Physical Installation of the Receiver . 92.3.1Rack Mounting the Receiver . 102.3.2Uneven Loading of Rack . 102.4Connecting the Receiver to a Satellite Dish . 102.4.1Outdoor Antenna Grounding. 102.4.2DC Voltage Requirement . 112.4.3Warnings about Shorting DC . 112.5Connecting to the Ethernet Network . 122.5.1Connecting the Cables . 122.5.2Using DHCP or Static IP Addresses . 122.5.3Assigning a TCP/IP Address . 122.5.4Assigning a Subnet Mask . 122.5.5Assigning a Default Gateway . 122.5.6Proxy Server Configuration . 122.5.7DNS Server Configuration . 122.5.8Setting Up “IP Only Mode” . 132.6Connecting the Audio Ports . 132.6.1Analog Audio Ports . 132.6.2Digital Audio Port . 134www.picodigital.comR830001-2001, REV. CTOLL FREE 800.421.6511
XDS-PRO Satellite Receivers2.72.7.1Physical Ports . 132.7.2Cues. 132.83Connecting the Relay Ports . 13Connecting the Program Associated Data (PAD) Port . 142.8.1In-Band Ancillary Data . 142.8.2Out-of-Band Ancillary Data . 14FRONT PANEL OPERATIONS . 153.1Status LEDs . 153.1.1Power LED . 153.1.2Signal LED . 153.1.3Update LED . 153.1.4Fault LED . 153.2LCD Display and User Interface . 153.3Front Panel Flow . 163.3.1Main Menu Options . 173.3.2Status Sub-Menus . 173.3.3SETUP Sub-Menus . 173.3.3.13.3.43.3.4.14SETUP: NETWORK Sub-Menus . 18AUDIO PORTS Sub-Menus. 18AUDIO PORTS: SETUP Sub-Menus . 19RECEIVER WEB INTERFACE . 204.1General Menu . 204.1.1Status Tab . 204.1.2Tuner Tab . 224.1.3Setup Tab . 234.1.4Relays Tab . 254.1.5Opto Inputs Tab . 264.1.5.1Coded Opto Input Mode . 264.1.5.2Uncoded Opto Input Mode . 274.1.5.3Programming Opto Inputs . 274.1.64.2Logs Tab . 28Programming Menu . 294.2.1Programs Tab . 294.2.2Recordings Tab . 294.3Content Menu . 304.3.1Audio Tab . 304.3.2All Tab . 305www.picodigital.comR830001-2001, REV. CTOLL FREE 800.421.6511
XDS-PRO Satellite Receivers4.45AFFILIATE WEB INTERFACE . 315.1678XDS-AMR Menu (Optional) . 30Accessing and Logging In . 315.1.1Obtaining login password for receivers that are equipped with front panels . 315.1.2Obtaining login password for receivers that are NOT equipped with front panels . 315.2Play Scheduling . 325.3Changing the Relay Mappings . 385.4Checking Receiver Health . 395.5Documentation Repository . 395.6Changing the Receiver’s Time Zone . 40MONITOR AND CONTROL INTERFACE . 416.1Setting up a Console Connection . 416.2Console Commands . 416.2.1User Account Commands . 416.2.2Tech Account Commands . 46XDS DISCOVERY TOOL. 557.1About The XDS Discovery Tool . 557.2Using the XDS Discovery Tool . 557.3Troubleshooting the XDS Discovery Tool . 55SPECIFICATIONS . 568.1Receiver Monitor & Control and Interface Specification . 568.1.1M&C Interface Features . 568.1.2M&C Interface Connector Pin-Outs . 568.1.3Relay Outputs . 578.1.4Analog Audio Output . 598.1.5Analog Audio Input . 608.1.6Digital Audio Input . 618.1.7Digital Audio Output . 628.1.8PAD/ASYNC/External Reset Port . 638.2Ethernet Port . 648.3RF Input Parameters . 648.4LBR Module (Optional) RF Input Parameters . 658.5Mechanical and Electrical . 658.6Environmental . 66Regulatory Compliance . 676www.picodigital.comR830001-2001, REV. CTOLL FREE 800.421.6511
XDS-PRO Satellite Receivers1 INTRODUCTIONWelcome to the future of digital audio for the radio industry. This is your user guide to our line of XDSPRO receivers. These receivers are equipped to deliver multiple audio services in high quality digital audiofor your radio station. They have been designed to make use of all the digital communication features oftoday, and to be upgraded to take advantage of the technologies of tomorrow.1.1 Important InformationThroughout this guide, you will find icons designed to help you quickly spot important information:The note icon identifies information for the properoperation of your equipment, including helpful hints,shortcuts, or important remindersNote!Caution!The caution icon identifies information that requirescareful attention in order to prevent equipment damage.The warning icon identifies a procedure or practice thatcould result in personal injury if not performed correctly.Warning!1.2 Hardware UpgradeabilityPico Digital, Inc. can upgrade its main control software and audio decoder algorithms over-the-air. Thisensures that your receiver will always have the most up to date features and functionality.1.3 Hardware VersatilityThe PRO1Q and PRO1R can deliver one channel of audio received via satellite on its single output portwhile the PRO4Q and PRO4R can deliver up to four channels of audio on any one of its four balancedoutput ports. Additionally, content can be received and stored locally for later use. This content canoriginate from a real time satellite broadcast, from a high speed satellite IP distribution channel, or canbe retrieved via the Internet over the Ethernet port(s).1.4 Network Management SystemThe XDS-PRO satellite receivers have been specifically designed so that their output can be controlled viaone central web application. This application is called the Network Management System, or NMS. Fromthe NMS, the receiver can be monitored and managed, and the user can set a schedule of live anddelayed programs for each output port. The NMS can also coordinate file transfers to store sound, data,or hardware updates directly to the PRO receiver’s internal storage device. Additionally, the NMS alsocomes equipped with an advanced event logging system ensuring that any technical problems will beaccompanied by a full history so that causes of problems may be easily identified and eliminated.7www.picodigital.comR830001-2001, REV. CTOLL FREE 800.421.6511
XDS-PRO Satellite Receivers2 GETTING STARTEDPlease take a few minutes to read through the User’s Guide prior to setting up and using the unit. If youare in a hurry, there is a Quick Start guide that comes packaged with the receiver, but please be sure toconsult this section at your earliest convenience.2.1 Unpacking the ReceiverUpon receiving your XDS-PRO receiver, ensure that all of the necessary parts have been included.2.1.1List of ContentsB
XDS-PRO Satellite Receivers 3 www. R830001-2001, REV. C picodigital.com TOLL FREE 800.421.6511 Document Revision History Revision Date Description ECO# A 10/11/11 Initial
