WIXLIB

Smart WatchUser ManualID205Thank you for purchasing our products. This manualaddresses the safety guidelines, warranty, and operatinginstructions. Please review this manual thoroughly beforeoperating your device.

Table of ContentsEnglish Version.1Getting Started .1What’s in the box.1What’s in this Document.1Setting up Your Watch.2Charging your watch.2Disassembling / Assembling Your Watch.3Wearing Your Watch.5Using Your Watch.6App Installation.6App Interfaces.8Pairing the Watch with Your Phone.10Getting to Know Your Watch.12Button Functions.12Watch Interfaces.12Home Screen (default).14Wake a Dimmed Screen.14Function Introduction.141.Tracking Sports.152. Monitoring Heart Rate.173. Relaxing.174. Setting Alarms.185. Controlling Phone Music.186. Tracking Sleep.197. More Functions.197.1 Call Notification.197.2 Message Notification.20

7.3 Women’s Health Tracking.207.4 Sedentary Reminder.20Basic Specifications.21FAQs.22Failure to find the watch when pairing. .22Occasional failure to connect with Bluetooth.22Failure to receive SMS/calls notifications.22Failure to connect to smartphone.23Warranty.24Important Safety Instructions.24

Getting StartedWhat’s in the box[!]Smart WatchUser ManualID205Thank you for purchasing our products. This manualaddresses the safety guidelines, warranty, and operatinginstructions. Please review this manual thoroughly beforeoperating your device.Smart watch(ID205 with bands)Charging cableUser manualWhat’s in this documentThis manual gets you started quickly with setting upyour watch. Setup ensures that your watch cansynchronize its data with the VeryFitPro app, where youcan get detailed information on your stats, viewhistorical trends, log sleep, and more. As soon as setupis complete, you’re ready to start moving. Theremainder of the manual walks you through everyfunction on your ID205.-1-

Setting up Your WatchCharging your watchPlease fully charge your watch before initial use.1. Plug the charging cable into the USB port on yourcomputer or a UL-certified USB wall charger.2. Place the watch in the charging cradle and push it inuntil you hear a click. The pins on the charging cradlemust align with the gold contacts on the back of thewatch. The percent charged appears on the screen.When the watch shows that the battery is low, connectthe watch to a USB charging adaptor or a port with5V-500mA. If the watch is installed correctly, it willvibrate.-2-

While the watch charges, pressthe left/right button to check thebattery level.Remove the watch from the power supply once fullycharged. USB charger requirement: DC USB port (5V-500mA) Charging time: 2-3 hoursDisassembling / Assembling Your WatchDisassembly1. To remove the wristbands, turn over the watch and findthe quick-release lever.2. While pressing the quick-release lever inward, gentlypull the wristband away from the watch to release it.-3-

-4-2. While pressing the quick-release lever inward, slidethe other end of the wristband into place.Assembly1. To reattach the wristbands, slide the pin (the sideopposite the quick-release lever) into the notch onthe watch. Attach the wristband with the clasp tothe top of the watch.3. Repeat on the other side.

3. When both ends of the pin are inserted, release thequick-release lever.Wearing Your WatchAll-day wear and exerciseFor all-day wear when you’re not exercising, wear thedevice on your wrist horizontally, a finger’s width belowyour wrist bone and lying flat, the same way you wouldput on a watch.For optimized heart rate tracking, keep these tips inmind:1. Experiment with wearing the watch higher on yourwrist during exercise. Because the blood flow in yourarm increases the farther up you go, moving thewatch up a couple of inches can improve the heartrate signal. Also, many exercises such as bike ridingor weight lifting require you to bend your wristfrequently, which is more likely to interfere with theheart rate signal if the watch is lower on your wrist.-5-

2. Do not wear your watch too tight. A tight bandrestricts blood flow, potentially affecting the heart ratesignal. This being said, the watch should also beslightly tighter (snug but not constricting) duringexercise than during all-day wear.Using Your WatchApp InstallationUse the watch with our customized VeryFitPro app.You can download VeryFitPro from Apple Store/GooglePlay or scan the QR codes below to download. iOS VeryFitPro-6-Android

Notes: The VeryFitPro app is only compatible withsmartphones, not tablets or PCs. Smartphone operating system should be iOS 8.0 /Android 4.4 or higher; Bluetooth version should be 4.0or higher.Smart Phone System Requirements iOS 8.0 & higher Android 4.4 & higher Bluetooth 4.0 & higher-7-

App Interfaces0Mainpage(Swipe down the pageto sync data from thewatch to your phone) Details-8-

,-·-· ·--· -- - -""',. .,,a---- .: ,.,0.-UI., .,., .,,.,0-·,---."' , Device User-9-

Pairing the Watch with Your PhonePlease pair the watch with your phone in theVeryFitPro app, NOT in the Bluetooth settings of yourphone.Pair the watch with yoursmartphone in theVeryFitPro appiOSDo NOT pair the watchwith your smartphonein your phone’sBluetooth settingsAndroid1. Enable the Bluetooth of your smartphone.2. Open the VeryFitPro app on your smartphone and goto the "Device" page, tap "Bind Device", then yoursmartphone starts searching devices.3. In the list of found devices that appear on yoursmartphone, tap on "ID205" to connect the watch toyour smartphone. (If your phone failed to find ID205,please search the watch on your smartphone again.)- 10 -

ŘřŚNotes: automatically search and reconnect itself if theconnection is lost or when Bluetooth is restarted aftermanual disconnection. the watch will be reset, and the information on the appwill be cleared. Please do not unbind the connectionunless there is an issue that will require a reset. When pairing, please ensure the watch and yoursmartphone is within 0.5 meters distance.- 11 -

Getting to Know Your WatchButton FunctionsPress and hold theleft button to enterthe sports mode.(you can define aspecific sportsmode in thefunction list of the ! # Press the rightbutton to return tothe previousinterface Press and holdthe right button toturn on the watch.Watch InterfacesThis is a touch screen; swipe the screen to go to differentinterfaces, and tap to enter the function.The home screen is the clock. On the clock: - 12 -

Notice bar .,. ,.,.,,II Status bar(Automatic Heart RateMonitoring, WristSense, Do Not Disturb,Find Phone)Function list fig. 1Data barNotes:When the battery level is less than 15%, the watch entersbattery save mode, at which you cannot operate the watch.Please charge the watch to operate it again.After the watch is bound to the app, the home screen willdisplay the time and date as shown in fig. 1.You can customize the home screen byfollowing the steps below:1) Tap and hold the home screen.2) Swipe down to choose one and tap toconfirm.- 13 -,

Home Screen (default)Tap the screen to switch between steps, distance,and calories. Contents displayed may be differentaccording to the home screen you choose.StepsDistanceCaloriesWake a Dimmed ScreenTo conserve power, the watch has a standby mode inwhich the screen turns off. To wake the screen, turn yourwrist towards you or press the left/right button.Function IntroductionTracks yourexercise data in upto 14 sportsmodes. Choosethe modes thatyou want todisplay on thewatch in the app.Tracks yourreal-time heartrate automaticallyand continuously.- 14 -Guides yourbreathing for arelaxation.Set alarms in theapp to have thewatch vibrates towake you up,take pills, andmore.

Control the musicplaying of yoursmartphone.Timing andcountdown.Some basicsettings of thewatch.Your recentsports record.1. Tracking SportsThe watch tracks your exercise data in up to 14 sportsmodes.You can set up to 8 different sports modes from among14 sports modes in the app to display on the watch ' * * # Start a sport * Tap the sport you choose to start.During sports Swipe the screen left/right to flip through exercise data. Press the right key to pause/resume the sport.- 15 -

End the sport Exercise data is displayed after the exercise has ended.Swipe down the screen to flip through exercise data:I I:Data of exercises less than 1 minute will not be saved.Notes: You can also use your phone’sGPS to track your pace anddistance during walks, hikes, runsor rides while mapping out your runor walk on your phone.In the app, tapIIo will pop up. Tapand to enter@running mode directly or tapto choose another sports mode.After entering running mode, theapp will track and map your rundistance (using your phone’sGPS). After the exercise, you can effortlessly check yourexercise data in both the app and the watch. Sports mode is up to 6 hours.- 16 -I

2. Monitoring Heart RateThe watch tracks your real-time heart rate automaticallyand continuously. You can also view your detailed heartrate data on the watch screen or in the app.»Notes: on the upper position of your wrist and a bit tighterthan usual when you exercise. In addition, completeyour profile in the app. ? monitoring heart rate all day automatically. You candisable/enable automatic heart rate monitoring in the ' * @ J ' # 3. Relaxing X X IIJ · Relax- 17 -

4. Setting Alarms1) Go to the "Device" page in the app and tap "AlarmAlert".2) Tap " " to add an alarm.3) Tap the alarm, then set the alarm type, repeat typeand time.[# * You can tap the alarm you set on the watch screen toenable/disable the alarm.5. Controlling Phone Music1) Go to the "Device" page in the app and tap "MusicControl".\# ] * 3) Tap "Music Controller" on the watch screen to enterthe function and control the music playing on yourphone.Note:You can only control the music player that’s running onyour smartphone.- 18 -

6. Tracking SleepThe watch automatically tracks your sleep duration(Deep Sleep, Light Sleep, and Wake-sleep) andconsistency with a comprehensive analysis of sleepquality data so you can see your sleep trends andimprove your routine.You can check your detailed sleep data in the app.7. More Functions7.1 Call NotificationWhen there is an incoming call, thewatch vibrates to alert you, and thescreen displays the caller ID.TapII I:on the watch screen to reject the call.Notes: ' * # (After enabling/disabling the Call Alert function, tap * # ' ' * ' # will not be notified on the watch during thedo-not-disturb period.- 19 -IIII

7.2 Message NotificationWhen messages (SMS, Facebook,WhatsApp, Twitter, Instagram,Facebook Messenger, LinkedIn,Email, Mail, Calendar, and more)come in, the watch vibrates to alertyou, and the screen displays themessage content.Notes: I ? ' * ? # messages be notified. (After enabling/disabling the? * # ' ' * ' # on # notified on the watch during the do-not-disturb period.7.3 Women’s Health TrackingThe watch reminds you of your important days likemenstrual period and safe period at the time you setwhen you enable the function in the app ("Device" page @ # 7.4 Sedentary ReminderThe watch vibrates to remind you to get up and movearound when you have been sitting too long ("Device" function and set the remind interval.)- 20 -IIllI

2) Swipe the watch screen right to come to the statusbar and tapto use the function.7.5 Find PhoneThe watch vibrates to remind you to get up and movearound when you have been sitting too long ("Device" function and set the remind interval.) # { ' * app and enable the function.- 21 -Model No.: ID205Sync: Bluetooth 4.0Screen: 1.3" TFT LCDBattery Capacity: 210mAhWorking Voltage: 3.8VWorking Temperature: -10 to 40 Weight: 1.37oz (39g)Waterproof Rating: 5ATMWorking Time: 10 daysBasic SpecificationsNote:You can use the find phone function only when it isenabled in the app.