Transcription
1600 Wall System 1 Curtain WallFEBRUARY, 2020EC 97911-226FEATURESFeaturesLaws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor. 1600 Wall System 1 is an outside glazed captured curtain wall 1600 Wall System 1 has a 2-1/2" (63.5) sight line Standard 6" (152.4) or 7-1/2" (190.5) depth systems Standard infill options 1/4" (6.4) and 1" (25.4), other infills available Thermally Broken by means of a continuous 1/4" (6.4) low conductance spacer Concealed fastener joinery creates smooth, monolithic appearance Open-back horizontals and perimeters are available for cost savings Shear block fabrication method Corners and splayed mullions Offers integrated entrance framing systems Silicone compatible glazing materials for long-lasting seals 1600 Wall System 1 has been small and large missile impact and cycle tested Two color option Permanodic anodized finishes in seven choices Painted finishes in standard and custom choicesOptional Features Steel reinforcing Rain screen and backpans Optional deep profile and bull nose covers Fiberglass pressure plates Veneer system Integrates with standard Kawneer windows and GLASSvent windows for curtain wall Integrates with Versoleil Sunshade Outrigger System and Horizontal or Vertical SingleBlade System Integrates with 1600 PowerShade Profit Maker Plus die sets 2017, Kawneer Company, Inc.Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement. Deep and heavy-weight mullions Hurricane impact resistant framing options: 7-1/16" (179.4), 7-13/16" (198.4), 10-1/16" (255.6) &10-13/16" (274.6) Hurricane impact resistant glazed-in panelProduct Applications Ideal for low to mid-rise applications where high performance is desired It also is the right choice for high span applicationsFor specific product applications,consult your Kawneer representative.kawneer.comADMD010EN1
Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.1600 Wall System 1 Curtain WallBLANK PAGEADMD010ENkawneer.com 2017, Kawneer Company, Inc.Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.2FEBRUARY, 2020EC 97911-226
FEBRUARY, 20201600 Wall System 1 Curtain WallEC 97911-2263INDEXPICTORIAL VIEW.51" INFILL DETAILS.61/4" INFILL DETAILS.7ENTRANCE DETAILS.8,9CORNERS.10SPLAYED MULLION OPTIONS.11GLASSvent WINDOWS FOR CURTAIN WALL/WINDOWS.12BACKPAN AND MISCELLANEOUS DETAILS.13MISCELLANEOUS FRAMING.14HURRICANE IMPACT RESISTANT DETAILS. 15-17HURRICANE IMPACT RESISTANT GLAZED-INPANEL DETAILS.18ANCHORING.19,20WIND LOAD CHARTS. 21-29DEADLOAD CHARTS. 30-33THERMAL CHARTS . 34-46Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses() are millimeters unless otherwise noted. 2017, Kawneer Company, Inc.Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.Architects - Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expandedand modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can bemodified to expand design flexibility. Please contact your Kawneer representative for further assistance.The following metric (SI ) units are found in these details:m – metercm – centimetermm – millimeters – secondPa – pascalMPa – megapascalkawneer.comADMD010EN
Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.1600 Wall System 1 Curtain WallBLANK PAGEADMD010ENkawneer.com 2017, Kawneer Company, Inc.Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.4FEBRUARY, 2020EC 97911-226
2017, Kawneer Company, Inc.Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.FEBRUARY, 2020kawneer.com1600 Wall System 1 Curtain WallEC 97911-226PICTORIAL VIEWADMD010EN5
9A7134751A88A66A89ADMD010EN238A49BOPTIONAL STEELREINFORCINGAS REQUIRED56A6kawneer.com 2017, Kawneer Company, Inc.1" INFILL DETAILSLaws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.1600 Wall System 1 Curtain WallKawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.ELEVATION IS NUMBER KEYED TO DETAILS2-1/2"(63.5)99A9B7-1/2" (190.5)26" (152.4)6FEBRUARY, 2020EC 97911-226Additional information and CAD details are available at www.kawneer.com11A6" (152.4)7 -1/2" (190.5)2-1/2"(63.5)
2017, Kawneer Company, Inc.Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.ELEVATION IS NUMBER KEYED TO (63.5)6 -3/4" (171.5)77A7B5-1/4" (133.4)FEBRUARY, 20201600 Wall System 1 Curtain WallEC 97911-2261/4" INFILL DETAILSAdditional information and CAD details are available at www.kawneer.com11A21366A41A55A25-1/4" (133.4)6 -3/4" (171.5)737BOPTIONAL STEELREINFORCINGAS REQUIRED45A57
1600 Wall System 1 Curtain Wall8FEBRUARY, 2020ENTRANCE DETAILS (1" INFILL)EC 97911-226Additional information and CAD details are available at www.kawneer.com351246TRANSOM BARB/H OR O/PC/HBUTT HUNG OROFFSET PIVOT WITHSURFACE CLOSEROR FLOOR CLOSERB/H OR O/PELEVATION IS NUMBER KEYED TO DETAILS1ADOOR JAMB1-15/16"(88.9)TYP.BUTT HUNG OROFFSET PIVOT2Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.11ATRANSOM BARBUTT HUNG OR OFFSET PIVOTWITH SINGLE ACTINGCONCEALED OVERHEAD CLOSERCENTER HUNG4TRANSOM BARCENTER HUNGCONCEALED OVERHEADOR FLOOR CLOSERDOOR JAMBBUTT HUNG OROFFSET PIVOT56TRANSOM BARBUTT HUNG OR OFFSET PIVOTWITH LCN CONCEALEDOVER HEAD CLOSEROR SURFACE CLOSERADMD010ENkawneer.com 2017, Kawneer Company, Inc.3DOOR JAMBKawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.3/4"(19)TYP.
1600 Wall System 1 Curtain WallFEBRUARY, 2020EC 97911-2269ENTRANCE DETAILS (1/4" INFILL)Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.Additional information and CAD details are available at www.kawneer.com11A324B/H OR O/P1TRANSOM BARC/HBUTT HUNG OROFFSET PIVOT WITHSURFACE CLOSEROR FLOOR CLOSERELEVATION IS NUMBER KEYED TO DETAILSDOOR JAMBBUTT HUNG OROFFSET PIVOTTRANSOM BARBUTT HUNG OR OFFSET PIVOTWITH SINGLE ACTINGCONCEALED OVERHEAD CLOSER3/4"(19.1)TYP.DOOR JAMBCENTER HUNG 2017, Kawneer Company, Inc.Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.1-15/16"(88.9)TYP.21A34TRANSOM BARCENTER HUNGCONCEALED OVERHEADOR FLOOR CLOSERkawneer.comADMD010EN
90 OUTSIDE CORNER90 INSIDE CORNER90 OUTSIDE CORNER135 OUTSIDE CORNER135 OUTSIDE CORNER135 INSIDE CORNERADMD010ENkawneer.com 2017, Kawneer Company, Inc.CORNERSLaws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.1600 Wall System 1 Curtain WallKawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.10FEBRUARY, 2020EC 97911-226Additional information and CAD details are available at www.kawneer.comNOTE: 1" SYSTEM SHOWN, 1/4" SYSTEM SIMILAR.
2017, Kawneer Company, Inc.Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.FEBRUARY, 2020kawneer.com1600 Wall System 1 Curtain WallEC 97911-226SPLAYED MULLION OPTIONSAdditional information and CAD details are available at www.kawneer.com0 TO 5 0 TO 5 5 TO 15 5 TO 15 INSIDE SPLAYED MULLIONSADMD010EN15 TO 25 OUTSIDE SPLAYED MULLIONS15 TO 25 11
121600 Wall System 1 Curtain WallFEBRUARY, 2020GLASSvent WINDOWS FOR CURTAIN WALL/WINDOWSEC 97911-226Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.Additional information and CAD details are available at www.kawneer.comGLASSvent WINDOWSFOR CURTAIN WALLHEADStructural Silicone Sealant(by Others)*SILLJAMBNOTE: Other vent types can be accommodated. Contact yourKawneer representative for other options.HEADSILLJAMBADMD010ENkawneer.com 2017, Kawneer Company, Inc.8225TL THERMAL WINDOWSKawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.* INSTALLER NOTE: Installer is responsible for all required compatibility review and approvals with the Structural Silicone Manufacturer and the Insulating Glass Unit Manufacturer.
2017, Kawneer Company, Inc.Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.kawneer.com673ELEVATION IS NUMBER KEYED TO DETAILSNOTE: 6" SYSTEM SHOWN, 7-1/2" SYSTEM SIMILAR1JAMB MULLIONAT SPANDREL(With vapor barrier tie-in)3THERMALLY BROKENDOOR ADAPTORFOR INSULCLAD DOORSAA 250 THERMAL DOOR1/2" (12.7)2D.L.O.13/8" (9.5)2-1/2" (63.5)3/8" (9.5)D.L.O.MULLION LENGTHCONSTRUCTION JOINT1/2" (12.7) MAX (ALLOWS /-1/4" MOVEMENT)5MULLION LENGTHLaws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.FEBRUARY, 20201600 Wall System 1 Curtain WallEC 97911-226BACKPAN AND MISCELLANEOUS DETAILSAdditional information and CAD details are available at www.kawneer.com44HEAD TRANSOM AT PARAPET FLASHING5EXPANSION JOINT26MULLION AT SPANDRELTYPICAL DEADLOAD ANCHOR37TRANSOM – SPANDREL OVER VISIONADMD010EN13
1600 Wall System 1 Curtain Wall14FEBRUARY, 2020MISCELLANEOUS FRAMINGEC 97911-226Additional information and CAD details are available at TUREDMULLION 7-1/2"(190.5)6"(152.4)Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.Architects – Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded andmodified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be modifiedto expand design flexibility. Please contact your Kawneer representative for further assistance.4"(101.6)OPTIONALFIBERGLASSPRESSURE PLATE2-1/2"(63.5)OPTIONAL COVERS4" SIGHT LINE2-1/2"(63.5)DOUBLE MULLIONVENEER SYSTEM069263GYPSUM BOARD TRIM2-1/2"(63.5)DEEP MULLIONSTOOL TRIM OPTIONS:069264 - 2-3/4" (69.9)069265 - 4-1/2" (114.3)069266 - 5" (127.0)069267 - 6-1/8" (155.6)069268 - 6-3/4" (171.4)NOTE:STOOL TRIMS REQUIRE 069271 TRIM CLIP PACKAGEINTERIOR STOOL TRIMADMD010ENkawneer.com 2017, Kawneer Company, eer reserves the right to change configuration without prior notice when deemednecessary for product OPTIONAL COVERS
1600 Wall System 1 Curtain WallFEBRUARY, 2020EC 97911-22615HURRICANE IMPACT RESISTANT DETAILSAdditional information and CAD details are available at www.kawneer.comNOTE: DETAILS SHOWN WITH 9/16" INFILL AND ARE GLAZED FOR LARGE MISSILE IMPACT (LMI).SEE NEXT PAGE FOR OTHER GLAZING PANSIONHORIZONTAL52-3/4"(69.9)ELEVATION IS NUMBER KEYED TO DETAILS364Structural SiliconeSealant(by Others)*7 2017, Kawneer Company, Inc.5A3-19/32"(91.3)Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.1OPTIONAL STEELREINFORCINGAS REQUIRED3-19/32"(91.3)* INSTALLER NOTE: Installer is responsible for all required compatibility review and approvals with the Structural Silicone Manufacturer and the Insulating Glass Unit Manufacturer.kawneer.comADMD010EN
1600 Wall System 1 Curtain Wall16FEBRUARY, 2020EC 97911-226HURRICANE IMPACT RESISTANT DETAILSAdditional information and CAD details are available at www.kawneer.com97-1/16"(179.4)DOOR JAMBAT MULLION9/16" INFILLLARGE MISSILE (LMI)DOOR JAMBAT PERIMETER3/32"(2.4)3-1/2"(88.9)OPTIONAL10" DEEP SYSTEM1-5/16" INFILLLARGE MISSILE (LMI)10TRANSOM BAR9/16" INFILLLARGE MISSILE (LMI)Structural SiliconeSealant(by -1/2"(63.5)OPTIONAL10" DEEP SYSTEM9/16" INFILLLARGE MISSILE (LMI)Kawneer reserves the right to change configuration without prior notice when deemednecessary for product 1-5/16" INFILLLARGE MISSILE (LMI)LEVEL E2-1/2"(63.5)* INSTALLER NOTE: Installer is responsible for all required compatibility review and approvals with the Structural Silicone Manufacturer and the Insulating Glass Unit Manufacturer.ADMD010ENkawneer.com 2017, Kawneer Company, Inc.8Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.NOTE: 350 IR DOORS ARE USED WITH IMPACT FRAMING.DOORS ARE GLAZED WITH 9/16" INFILL.
1600 Wall System 1 Curtain WallFEBRUARY, 2020EC 97911-226HURRICANE IMPACT RESISTANT DETAILSAdditional information and CAD details are available at www.kawneer.com2-1/2"(63.5)1-5/16" INFILLSMALL MISSILE (SMI)2-1/2"(63.5)9/16" INFILL (SMI)SMALL al SiliconeSealant(by Others)*9/16" INFILLSMALL MISSILE (SMI)OVER9/16" INFILLLARGE MISSILE (LMI)1-5/16" INFILLLARGE MISSILE (LMI)Structural SiliconeSealant(by Others)*1-5/16" INFILLLARGE MISSILE (LMI)LEVEL E 2017, Kawneer Company, Inc.Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.GLAZING OPTIONS* INSTALLER NOTE: Installer is responsible for all required compatibility review and approvals with the Structural Silicone Manufacturer and the Insulating Glass Unit Manufacturer.kawneer.comADMD010EN17
1/2" MIN(12.7)D.L.O.D.L.O.1/2" MIN(12.7)HURRICANE IMPACT RESISTANT GLAZED-IN PANEL DETAILS44OPP.3ELEVATION IS NUMBER KEYED TO DETAILS17-13/16"421/2" MIN(12.7)ADMD010EN2-1/2"(63.5)D.L.O.3kawneer.com 2017, Kawneer Company, Inc.2-1/2"(63.5)2Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.D.L.O.1600 Wall System 1 Curtain WallKawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.2-1/2"(63.5)18FEBRUARY, 2020EC 97911-226Additional information and CAD details are available at www.kawneer.comNOTE: DETAILS SHOWN WITH 1/8" PANELS FOR LARGE MISSILE IMPACT (LMI).17-13/16"(198.4)
2017, Kawneer Company, Inc.Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.FEBRUARY, 2020kawneer.com1600 Wall System 1 Curtain WallEC 97911-226ANCHORINGActual project conditions will determine specific anchor design. Details on this page are for reference only.1" (25.4) MINIMUMANCHORING TO FLOOR SLAB1" (25.4) MINIMUMANCHORING TO SUPPORT STEELADMD010EN19
1" (25.4) MINIMUMANCHORING TO HORIZONTALSTRUCTURAL STEEL1" (25.4) MINIMUMANCHORING TO VERTICALSTRUCTURAL STEELADMD010ENkawneer.com 2017, Kawneer Company, Inc.ANCHORINGLaws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.1600 Wall System 1 Curtain WallKawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.20FEBRUARY, 2020EC 97911-226Actual project conditions will determine specific anchor design. Details on this page are for reference only.
FEBRUARY, 20201600 Wall System 1 Curtain WallWIND LOAD / DEAD LOAD CHARTSWIND LOAD CHARTSMullions are designed for deflection limitations in accordance with AAMA TIR-A11 of L/175 up to 13'-6" and L/240 1/4"above 13'-6". These curves are for mullions WITH HORIZONTALS and are based on engineering calculations for stressand deflection. Allowable wind load stress for ALUMINUM 15,152 psi (104MPa), STEEL 30,000 psi (207MPa). Chartedcurves, in all cases are for the limiting value. Wind load charts contained herein are based upon nominal wind loadutilized in allowable stress design. A conversion from Load Resistance Factor Design (LRFD) is provided. To convertultimate wind loads to nominal loads, multiply ultimate wind loads by a factor of 0.6 per ASCE/SEI 7. A 4/3 increase inallowable stress has not been used to develop these curves. For special situations not covered by these curves, contactyour Kawneer representative for additional information.DEADLOAD CHARTSHorizontal or deadload limitations are based upon 1/8" (3.2), maximum allowable deflection at the center of anintermediate horizontal member. The accompanying charts are calculated for 1" (25.4) thick insulating glass or 1/4" (6.4)thick glass supported on two setting blocks placed at the loading points shown. 2017, Kawneer Company, Inc.Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.EC 97911-226Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.21kawneer.comADMD010EN
1600 Wall System 1 Curtain WallFEBRUARY, 2020WIND LOAD CHARTS (1" INFILL)11.52723226.52120TWIN SPANMETERS.5285.5A413A12B113.5MULLION HEIGHT IN FEET4.514MULLION HEIGHTEQUALEQUAL156" (152.4)5MULLION 825METERS2.571516200124.514413601234567I 5.035(209.57 x 104)S 1.993(32.66 x 103)812012345678MULLION CENTERS IN FEETMULLION CENTERS IN FEETSINGLE SPANTWIN 6E87.524173D9MULLION HEIGHT IN FEETAMULLION HEIGHTEQUALEQUAL4.5146" (152.4)15METERS5MULLION LLION CENTERS IN FEET8METERSMULLION HEIGHT IN FEET8.5272610MULLION HEIGHT IN FEET2961851.529195130I 6.779(282.16 x 104)S 2.652(43.46 x 103)12012345678MULLION CENTERS IN FEETADMD010ENkawneer.com 2017, Kawneer Company, Inc.5LRFD UltimateDesign Load33 PSF (1580)50 PSF (2400)67 PSF (3200)83 PSF (4000)100 PSF (4790)Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.A B C D E METERSAllowable StressDesign Load20 PSF (960)30 PSF (1440)40 PSF (1920)50 PSF (2400)60 PSF (2880)Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.SINGLE SPANEC 97911-226METERS22
1600 Wall System 1 Curtain WallFEBRUARY, 2020EC 97911-226WIND LOAD CHARTS (1" INFILL)SINGLE SPANA B C D E METERS276.52120Allowable StressDesign Load20 PSF (960)30 PSF (1440)40 PSF (1920)50 PSF (2400)60 PSF (2880)LRFD UltimateDesign Load33 PSF (1580)50 PSF (2400)67 PSF (3200)83 PSF (4000)100 PSF (4790)TWIN 123.5D11E10MULLION HEIGHT IN FEET15METERS5167-1/2" (190.5)17MULLION HEIGHTEQUALEQUAL25MULLION 162003712345674.514241360I 10.135(421.85 x 104)S 3.027(49.60 x 103)81201234567MULLION CENTERS IN FEETMULLION CENTERS IN FEETSINGLE SPANTWIN 96.521202868265.54.5B134C12D3.511E10MULLION HEIGHT IN FEETA14MULLION HEIGHTEQUALEQUAL15METERS57-1/2" (190.5)1716D25MULLION HEIGHT18MULLION HEIGHT IN 620047265B012345678I 12.736(530.11 x 104)S 3.791(62.12 x 103)MULLION CENTERS IN FEETkawneer.com154.5144131201234567MULLION CENTERS IN FEETADMD010EN8METERS22 2017, Kawneer Company, Inc.Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.123MULLION HEIGHT IN FEETLaws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.523
1600 Wall System 1 Curtain WallFEBRUARY, 2020WIND LOAD CHARTS (1" INFILL)A B C D E METERS.511.523092928SINGLE SPANLRFD UltimateDesign Load33 PSF (1580)50 PSF (2400)67 PSF (3200)83 PSF (4000)100 PSF (4790)162004 W/162301METERS.529288.58.5272525MULLION HEIGHT6.521A206B1918METERS722MULLION HEIGHT IN 62301Ia 12.736(530.11 x 104)Sa 3.791(62.12 x 103)Is 3.805(158.37 x 104)Ss 1.669(27.35 x 103)Ia 12.736(530.11 x 104)Sa 3.791(62.12 x 103)Is 5.684(236.59 x 104)Ss 2.493(40.85 x 103)5E154.5144131201234567MULLION CENTERS IN FEETMULLION CENTERS IN FEETSINGLE SPANSINGLE SPAN162004 W/162301/302162004 92928288.582625256.521B619C187-1/2" (190.5)7A2220MULLION HEIGHT24MULLION HEIGHT IN FEET7.523826METERSMULLION HEIGHT IN 3Ia 12.736(530.11 x 104)Sa 3.791(62.12 x 103)Is 7.893(328.53 x 104)Ss 3.462(56.73 x 103)Ia 12.736(530.11 x 104)Sa 3.791(62.12 x 103)Is 9.347(389.05 x 104)Ss 4.100(67.19 x 103)MULLION CENTERS IN FEET6C1917166.5METERS2712METERS826MULLION HEIGHT IN FEET1.5292712130E154.51441312012345678MULLION CENTERS IN FEETADMD010ENkawneer.com 2017, Kawneer Company, Inc.162004 W/162300Allowable StressDesign Load20 PSF (960)30 PSF (1440)40 PSF (1920)50 PSF (2400)60 PSF (2880)Laws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.SINGLE SPANEC 97911-226Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.24
1600 Wall System 1 Curtain WallFEBRUARY, 2020EC 97911-226WIND LOAD CHARTS (1" INFILL)SINGLE SPANSINGLE 6.5206195.551615I 42.441(1,766.52 x 104)S 8.816(144.74 x 103)1480Allowable StressDesign Load20 PSF (960)30 PSF (1440)40 PSF (1920)50 PSF (2400)60 PSF (2880)12345678LRFD UltimateDesign Load33 PSF (1580)50 PSF (2400)67 PSF (3200)83 PSF (4000)100 PSF (4790)SINGLE 518MULLION HEIGHT IN FEETD23MULLION HEIGHT7.510-1/2" (266.7)C248.5B26METERSMULLION HEIGHT IN -1/2" (266.7)A28METERS29 2017, Kawneer Company, Inc.Ia 42.441(1,766.52 x 104)Sa 8.816(144.47 x 103)Is 17.600(732.56 x 104)Ss 4.732(77.54 x 103)MULLION CENTERS IN FEETMETERS175161514162064W/1623634.5SINGLE SPAN17D22MULLION CENTERS IN FEET.57.524174.513B18140MULLION HEIGHT IN FEET7A22MULLION HEIGHT2310-1/2" (266.7)2410-1/2" (266.7)25METERS826A B C D E Kawneer reserves the right to change configuration without prior notice when deemednecessary for product improvement.1308.527MULLION HEIGHT IN FEETLaws and building and safety codes governing the design and use of Kawneer products,such as glazed entrance, window, and curtain wall products, vary widely. Kawneer does notcontrol the selection of product configurations, operating hardware, or glazing materials,and assumes no responsibility therefor.2812254.501234567MULLION CENTERS IN FEETkawneer.com8162064W/162363/36451615Ia 42.441(1,766.52 x 104)Sa 8.816(144.47 x 103)Is 26.033(1,083.57 x 104)Ss 7.000(114.71 x 103)144.501234567MULLION CENTERS IN FEETADMD010EN8162064W/162363/364/365Ia 42.441(1,766.52 x 104)Sa 8.816(144.47 x 103)Is 32.432(1,349.92 x 104)Ss 8.721(142.91 x 103)
1600 Wall System 1 Curtain WallFEBRUARY, 2020WIND L
kawneer.com 1 E 116 1600 S 1 all ADMD010EN FEBRUARY, 2020 FEATURES For specific product applications, consult your Kawneer representative. Features 1600 Wall System 1is an outside glazed captured curtain wall 1600 Wall System 1 has a 2-1/2" (63.5) sight line Standard 6" (152.4) or 7-1/2" (190.5) depth systems
