WIXLIB

108KN58090105AGJ-Link / J-Trace (UM08001)ExplanationChapter "Working with J-Link"* Section "J-Link control panel" updated.Chapter "Flash download and flash breakpoints"* Section "Supported devices" updated.Chapter "Device specifics"* Section "NXP" updated.Chapter "Device specifics"* Section "NXP" updated.Chapter "Introduction"* Section "Common features of the J-Linkproduct family" updated.Chapter "Working with J-Link"* Section "Reset strategies" updated.* Section "Indicators" updated.Chapter "Flash download and flash breakpoints"* Section "Supported devices" updated.Chapter "J-Link and J-Trace related software"* Section "J-Link STM32 Commander" added.Chapter "Working with J-Link"* Section "Reset strategies" updated.Chapter "Working with J-Link"* Section "Reset strategies" updated.Chapter "Background information"* Section "Embedded Trace Macrocell (ETM)"updated.Chapter "J-Link and J-Trace related software"* Section "Dedicated flash programmingutilities for J-Link" updated.Several changes in the manual structure.Chapter "Working with J-Link"* Section "Indicators" added.Chapter "Hardware"* Several corrections.* Section "Hardware Versions" Version 8.0 added.Chapter "Working with J-Link and J-Trace"* Section "Reset strategies" updated.Chapter J-Link and J-Trace related software* Section "J-Link STR91x Commander(Command line tool)" updated.Chapter "Device specifics"* Section "ST Microelectronics" updated.Chapter "Hardware" updated.Chapter "Working with J-Link"* Section "Cortex-M3 specific reset strategies"Chapter "Working with J-Link"* Section "Cortex-M3 specific reset strategies"Chapter Hardware* Section "Target board design for JTAG"updated.* Section "Target board design for SWD" added.Chapter "Working with J-Link Pro"* Section "Connecting J-Link Pro the first time"updated. 2004-2014 SEGGER Microcontroller GmbH & Co. KG

627AGJ-Link / J-Trace (UM08001)ExplanationChapter "Working with J-Link Pro"* Section "Introduction" updated.* Section "Configuring J-Link Provia web interface" updated.Chapter "Introduction"* Section "J-Link Pro overview" updated.Chapter "Working with J-Link Pro"* Section "FAQs" added.Chapter "Support and FAQs"* Section "Frequently Asked Questions" updated.Chapter "Hardware" updated.Chapter "Working with J-Link and J-Trace"* Section "Command strings" updated.Chapter "Working with J-Link Pro" updated.Chapter "Working with J-Link Pro" added.Chapter "Licensing"* Section "Original SEGGER products" updated.Several corrections.Chapter "Flash download and flash breakpoints"* Section "Supported devices" corrected.Several corrections.Chapter "Working with J-Link and J-Trace"* Section "Connecting multiple J-Links /J-Traces to your PC" updated.Chapter "Licensing" updated.Chapter "Licensing" added.Chapter "Hardware"Section "J-Link OEM versions" moved to chapter"Licensing"Chapter "Hardware"Section "JTAG Trace connector" JTAG Traceconnector pinout corrected.Section "J-Link OEM versions" updated.Chapter "J-Link control panel" moved to chapter"Working with J-Link".Several corrections.Chapter "Flash download and flash breakpoints"Section "Supported devices" updated.Chapter "Flash download and flash breakpoints"Section "Supported devices" updated.Chapter "Flash download and flash breakpoints"updated.Chapter "Flash download and flash breakpoints",section "Supported devices" updated.Chapter "Flash download and flash breakpoints"updated.Chapter "J-Link status window" renamed to "J-Linkcontrol panel"Various corrections.Chapter "Flash download and flash breakpoints"Section "Licensing" updated.Section "Using flash download and flashbreakpoints with different debuggers" updated.Chapter "J-Link status window" added. 2004-2014 SEGGER Microcontroller GmbH & Co. KG

71211AG29070912SK28070912SKJ-Link / J-Trace (UM08001)ExplanationChapter "Support and FAQs"Section "Frequently Asked Questions" updatedChapter "Reset strategies"Section "Cortex-M3 specific reset strategies"updated.Chapter "Reset strategies"Section "Cortex-M3 specific reset strategies"updated.Chapter "Hardware"Section "Differences between different versions"updated.Chapter "Working with J-Link and J-Trace"Section "Cortex-M3 specific reset strategies"added.Chapter "J-Link and J-Trace related software"Section "J-Link software and documentationpackage in detail" updated.Chapter "J-Link and J-Trace related software"Section "J-Link TCP/IP Server (Remote J-Link /J-Trace use)" updated.Chapter "Working with J-Link and J-Trace"Section "Command strings" updated.Chapter "Flash download and flash breakpoints"Section "Introduction" updated.Section "Licensing" updated.Section "Using flash download and flashbreakpoints with different debuggers" updated.Chapter "Flash download and flash breakpoints"addedChapter "Device specifics:"Section "ATMEL - AT91SAM7 - Recommended initsequence" added.Chapter "Device specifics":Section "NXP - LPC - Fast GPIO bug" list ofdevice enhanced.Chapter "Device specifics":Section "NXP - LPC - Fast GPIO bug" updated.Chapter "Device specifics":Section "Analog Devices" updated.Section "ATMEL" updated.Section "Freescale" added.Section "Luminary Micro" added.Section "NXP" updated.Section "OKI" added.Section "ST Microelectronics" updated.Section "Texas Instruments" updated.Chapter "Related software":Section "J-Link STR91x Commander" updatedChapter "Hardware", section "Target board design"updated.Chapter "Related software":Section "J-LinkSTR91x Commander" added.Chapter "Device specifics":Section "ST Microelectronics" added.Section "Texas Instruments" added.Subsection "AT91SAM9" added. 2004-2014 SEGGER Microcontroller GmbH & Co. KG

0914OO14060818TQ13060711OO12060628OOJ-Link / J-Trace (UM08001)ExplanationChapter "Working with J-Link/J-Trace":Section "Command strings" updated.Chapter "Working with J-Link/J-Trace":Section "Command strings" updated.Chapter "Introduction":Section "Features of J-Link" updated.Chapter "Background Information":Section "Embedded Trace Macrocell" added.Section "Embedded Trace Buffer" added.Chapter "Working with J-Link/J-Trace":Section "Reset strategies in detail"- "Software, for Analog Devices ADuC7xxxMCUs" updated- "Software, for ATMEL AT91SAM7 MCUs"added.Chapter "Device specifics"Section "Analog Devices" added.Section "ATMEL" added.Chapter "Setup":"Uninstalling the J-Link driver" updated."Supported ARM cores" updated.Chapter "Hardware":"Using the JTAG connector with SWD" updated.Chapter "Hardware":"Using the JTAG connector with SWD" added.Chapter "Hardware":"Differences between different versions"supplemented.Chapter "J-Link / J-Trace related software":"J-Link GDB Server" licensing updated.Chapter "J-Link / J-Trace related software" updatedand reorganized.Chapter "Hardware""List of OEM products" updatedChapter "Device specifics" addedSubchapter "Command strings" addedChapter "Hardware":"Version 5.3": Current limits added"Version 5.4" addedChapter "Setup":"Installating the J-Link USB driver" removed."Installing the J-Link software and documentationpack" added.Subchapter "List of OEM products" updated."OS support" updatedChapter "Preface": "Company description" added.J-Link picture changed.Subchapter 1.5.1: Added target supply voltage andtarget supply current to specifications.Subchapter 5.2.1: Pictures of ways to connect JTrace.Subchapter 4.7 "Using DCC for memory reads"added.Subchapter 5.2.2: Corrected JTAG Trace connector pinout table.Subchapter 4.1: Added ARM966E-S to List of supported ARM cores. 2004-2014 SEGGER Microcontroller GmbH & Co. KG

51011050818TQTQTWJ-Link / J-Trace (UM08001)ExplanationSubchapter 5.5.2.2 changed.Subchapter 5.5.2.3 added.ARM9 download speed updated.Subchapter 8.2.1: Screenshot "Start sequence"updated.Subchapter 8.2.2 "ID sequence" removed.Chapter "Support" and "FAQ" merged.Various improvementsChapter "Literature and references" added.Chapter "Hardware":Added common information trace signals.Added timing diagram for trace.Chapter "Designing the target board for trace"added.Chapter "Related Software": Added JLinkARM.dll.Screenshots updated.Chapter Working with J-Link: Sketch added.Chapter Working with J-Link: "Connecting multipleJ-Links to your PC" added.Chapter Working with J-Link: "Multi core debugging" added.Chapter Background information: "J-Link firmware" added.Chapter Setup: "JTAG Speed" added.Chapter Background information: "Flash programming" added.Chapter Setup: "Scan chain configuration" added.Some smaller changes.Performance values updated.Chapter "Working with J-Link" added.Initial version. 2004-2014 SEGGER Microcontroller GmbH & Co. KG

12J-Link / J-Trace (UM08001) 2004-2014 SEGGER Microcontroller GmbH & Co. KG

13About this documentThis document describes J-Link and J-Trace. It provides an overview over the majorfeatures of J-Link and J-Trace, gives you some background information about JTAG,ARM and Tracing in general and describes J-Link and J-Trace related software packages available from Segger. Finally, the chapter Support and FAQs on page 307 helpsto troubleshoot common problems.For simplicity, we will refer to J-Link ARM as J-Link in this manual.For simplicity, we will refer to J-link Pro as J-Link Pro in this manual.Typographic conventionsThis manual uses the following typographic conventions:StyleUsed forBodyBody text.KeywordText that you enter at the command-prompt or that appears on thedisplay (that is system functions, file- or pathnames).ReferenceReference to chapters, tables and figures or other documents.GUIElementButtons, dialog boxes, menu names, menu commands.Table 1.1: Typographic conventionsJ-Link / J-Trace (UM08001) 2004-2014 SEGGER Microcontroller GmbH & Co. KG

14SEGGER Microcontroller GmbH & Co. KG developsand distributes software development tools and ANSI Csoftware components (middleware) for embedded systems in several industries such as telecom, medicaltechnology, consumer electronics, automotive industryand industrial automation.SEGGER’s intention is to cut software developmenttime for embedded applications by offering compact flexible and easy to use middleware,allowing developers to concentrate on their application.Our most popular products are emWin, a universal graphic software package for embedded applications, and embOS, a small yet efficient real-time kernel. emWin, writtenentirely in ANSI C, can easily be used on any CPU and most any display. It is complemented by the available PC tools: Bitmap Converter, Font Converter, Simulator andViewer. embOS supports most 8/16/32-bit CPUs. Its small memory footprint makes itsuitable for single-chip applications.Apart from its main focus on software tools, SEGGER develops and produces programmingtools for flash microcontrollers, as well as J-Link, a JTAG emulator to assist in development, debugging and production, which has rapidly become the industry standard debugprobe for microcontrollers / microprocessors.Corporate Office:http://www.segger.comEMBEDDED SOFTWARE(Middleware)United States Office:http://www.segger-us.comSEGGER TOOLSemWinFlasherGraphics software and GUIemWin is designed to provide an efficient, processor- and display controller-independent graphical userinterface (GUI) for any application thatoperates with a graphical display.Starterkits, eval- and trial-versions areavailable.Flash programmerFlash Programming tool primarily for microcontrollers.J-LinkembOSJ-TraceReal Time Operating SystemembOS is an RTOS designed to offerthe benefits of a complete multitaskingsystem for hard real time applicationswith minimal resources. The profilingPC tool embOSView is included.emFileThe de-facto standard debug probesupporting multiple architectures and debuginterfaces.Debug probe with trace capabilitiesJ-Link with Trace memory. supporting the ARMETM (Embedded Trace Macrocell).J-Link / J-Trace Related SoftwareAdd-on software to be used with SEGGER’s industry standard JTAG emulator, this includes flashprogramming software and flash breakpoints.File systememFile is an embedded file system withFAT12, FAT16 and FAT32 support.emFile has been optimized for minimum memory consumption in RAM andROM while maintaining high speed.Various Device drivers, e.g. for NANDand NOR flashes, SD/MMC and CompactFlash cards, are available.emUSBUSB device stackA USB stack designed to work on anyembedded system with a USB clientcontroller. Bulk communication andmost standard device classes are supported.J-Link / J-Trace (UM08001) 2004-2014 SEGGER Microcontroller GmbH & Co. KG

15Table of Contents1 Introduction ts. 22Supported OS . 23J-Link / J-Trace models . 24Model comparison. 25J-Link . 26J-Link ULTRA . 29J-Link PRO . 30J-Link Lite ARM . 31J-Link Lite Cortex-M . 32J-Trace ARM . 33J-Trace for Cortex-M . 36Flasher ARM. 38J-Link ColdFire . 39Common features of the J-Link product family . 40Supported CPU cores . 41Built-in intelligence for supported CPU-cores . 42Intelligence in the J-Link firmware . 42Intelligence on the PC-side (DLL) . 42Firmware intelligence per model . 44Supported IDEs . 462 .32.5.42.5.52.5.62.5.72.5.82.62.7. Components requiring a license48License types . 49Built-in license . 49Key-based license. 49Legal use of SEGGER J-Link software. 50Use of the software with 3rd party tools. 50Original SEGGER products. 51J-Link . 51J-Link PLUS . 51J-link ULTRA . 52J-Link PRO . 52J-Trace. 53J-Trace for Cortex-M . 53Flasher ARM. 54Flasher RX . 54Flasher PPC . 55J-Link OEM versions . 56Analog Devices: mIDASLink . 56Atmel: SAM-ICE . 56Digi: JTAG Link. 57IAR: J-Link / J-Link KS . 57IAR: J-Link Lite . 57IAR: J-Trace . 58NXP: J-Link Lite LPC Edition . 58SEGGER: J-Link Lite ARM. 58J-Link OBs . 59Illegal Clones . 60J-Link / J-Trace (UM08001) 2004-2014 SEGGER Microcontroller GmbH & Co. KG

163 J-Link software and documentation .93.103.10.13.113.11.13.11.23.12Software overview. 62J-Link Commander (Command line tool) . 63Command line options . 63Using command files. 64J-Link GDB Server . 66J-Link GDB Server CL (Windows, Lunux, Mac) .

Chapter "Setup" * Section "Getting started with J-Link and DS-5" V4.82 Rev. 0 140218 JL Chapter "Related Software" * Section "GDB Server" Command line option -notimout added. V4.80f Rev. 0 140204 JL Chapter "Related Software" * Section "GDB Server" Command line options and remote commands added. V4.80 Rev. 1 131219 JL/ NG Chapter "Related Software"