Transcription
CLI Administration GuidePublished June, 2022Version NOS 52x
Documentation Feedback: doc-feedback-hpe-storage@hpe.comLegal NoticesCopyright 2019 - 2022 by Hewlett Packard Enterprise Development LPNoticesThe information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise productsand services are set forth in the express warranty statements accompanying such products and services. Nothing herein should beconstrued as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors oromissions contained herein.Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or copying. Consistentwith FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no controlover and is not responsible for information outside the Hewlett Packard Enterprise website.Hewlett Packard Enterprise believes in being unconditionally inclusive. If terms in this document are recognized as offensive ornoninclusive, they are used only for consistency within the product. When the product is updated to remove the terms, this documentwill be updated.AcknowledgmentsIntel , Itanium , Pentium , Intel Inside , and the Intel Inside logo are trademarks of Intel Corporation in the United States and othercountries.Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/orother countries.Adobe and Acrobat are trademarks of Adobe Systems Incorporated.Java and Oracle are registered trademarks of Oracle and/or its affiliates.UNIX is a registered trademark of The Open Group.All third-party marks are property of their respective owners.Publication DateTuesday June 28, 2022 06:10:36Document IDgch1580761875832SupportAll documentation and knowledge base articles are available on HPE InfoSight at https://infosight.hpe.com. To register forHPE InfoSight, click the Create Account link on the main page.Email: support@nimblestorage.comFor all other general support contact information, go to html.Legal Notices ii
ContentsThe Array Command Line Interface.12Accessing the CLI.12CLI Commands.13Array Overview.14The HPE Nimble Storage Array.14Array Features.14IOPS and MiB/s Limits on Volumes and Folders.16Horizontal Scaling.16Relationship of Groups, Pools, Arrays, Folders, and Volumes.17Pools.18Feature Support on iSCSI and Fibre Channel Arrays.19Integration.19Wellness and DNA.20Access Controls.20User Permissions.20CHAP Accounts.21iSCSI Initiator Groups.21Fibre Channel Initiator Groups.21VLAN Segmentation and Tagging.22Major Workflows.23Updating array OS Workflow.23Provisioning Storage Volumes and Performance Policies Workflow.23Setting Up Replication Workflow.23Creating a vVol Datastore Workflow.24Restoring Snapshot Data from Clones Workflow.24Hardware and Software Updates.26Upgrades and Updates.26Hardware Upgrades.26Updates.26Find the Array OS Version.26Update the Array OS.27Verify the Array OS Update.29Contents 3
Network Configuration.30Network Configuration Profiles.30Draft Network Configuration Profile.30Create a Draft Network Configuration Profile.30Validate a Network Configuration Profile.31Activate a Network Configuration Profile.31Delete a Network Configuration Profile.31IP Addresses.32Add an IP Address.32Edit an IP Address.33Delete an IP Address.34Subnets.35Subnet Traffic Types.35Subnet Traffic Assignments.35IP Address Zones in Subnets.36Add a Subnet.37Edit a Subnet.38Remove a Subnet.38Routes.39Add a Static Route.39Edit a Static Route.40Delete a Static Route.40Configure the Default Gateway.41Network Interfaces.41Add an iSCSI Interface to a Subnet.41Remove an iSCSI Interface from a Subnet.42Set a Fibre Channel Interface Administrative State.42iSCSI Host Connection Methods.43Automatic iSCSI Host Connections.43Manual iSCSI Host Connections.43VLAN Support and VLAN Tagging.44About VLANs.44About VLAN Tagging.45Array Groups.47Group Leader Array.47Backup Group Leader Array.47Secondary Management IP Address and Backup Group Leader.48Methods for Setting Up a Secondary Management IP Address to Use for a Backup Group Leader .48Migrate Group Leader Functions to Backup Leader.48Adding Arrays to a Group.49Add an Unconfigured Array to Group.49Contents 4
Add a Configured Array to a Group (Group Merge).50Group Information.55Default Group Settings.55Modify Global Security Policies.55Modify the Default Inactivity Timeout.56Modify the Default Space Reservation.57Modify the Date, Time, and Time Zone.57Modify DNS Settings.57Multiprotocol Array Groups.58Enable Multiprotocol Access to a Group.58Disable Multiprotocol Access to a Group.59Switch a Volume from iSCSI to Fibre Channel Protocol.59Switch a Volume from Fibre Channel to iSCSI Protocol.59Initiator Groups.61iSCSI Initiator Groups.61Create an iSCSI Initiator Group.61Edit an iSCSI Initiator Group .62Delete an iSCSI Initiator Group.63Add an Initiator to an iSCSI Initiator Group.63Remove an Initiator from an iSCSI Initiator Group.64Fibre Channel Initiator Groups.64Create a Fibre Channel Initiator Group.64Add a Target Driven Zone Port to an Initiator Group .65Remove a Target Driven Zone Port from an Initiator Group.65Edit a Fibre Channel Initiator Group.66Delete a Fibre Channel Initiator Group.66Add an Initiator to a Fibre Channel Initiator Group.67Remove an Initiator from a Fibre Channel Initiator Group.67Initiator Group Access Control Lists.68Add an Initiator Group ACL to a Volume.68Remove an Initiator Group ACL from a Volume.69Volumes.70Clones, Replicas, and Snapshots.70Logical versus Physical Space.70Space Management.70Volume Reserve.71Thin Provisioning.71Volume Usage Limits.71A Note on Defragmentation.71Cloning Space Considerations.72Protecting Data Using Snapshots.72Contents 5
Create a Volume.72Edit a Volume.74Change a Volume's State.75Clone a Volume from a Snapshot.75Restore a Volume from a Snapshot.76Delete a Volume.76Volume Pinning.77Pinnable Flash Capacity.77Volume Pinning Caveats.77Unable to Pin a Volume.79Pin a Volume.79Unpin a Volume.79Performance Policies.
CLI Administration Guide - HPE InfoSight . Domains.92
