Transcription
RotaryEvaporatorsRotary evaporators are commonlyused for separating solvents, theStuart range offers simple control &a variety of glassware configurations,vertical, diagonal & cold fingercondensing depending on yourrequirements. All configurations areavailable with plastic coated glass.
Rotary Evaporators Digital controlEach unit is also provided with an easy to use Can be orientated for left or right handednessvacuum release and a continuous feed system, Simple, counterbalanced lift mechanismwhich allows more solvent to be drawn into the PTFE/glass liquid pathway for chemical inertnessrotating Florentine flask without the need to stop Long life graphite impregnated PTFE vacuum sealthe operation. Efficient flask and vapour tube ejection systemThere are three orientations of condenser availableA Rotary evaporator is a distillation unit thatdepending on the application and space available:incorporates an efficient condenser with a rotatingsample flask. As the flask containing the solvent is The RE400 rotary evaporator comes with arotated, it continually transfers a thin layer of liquiddiagonally orientated glass condenser forover the entire inner surface. This gives a very largestandard distillations.surface area for evaporation, the sample or Florentine The RE401 rotary evaporator comes with a verticallyflask can additionally be heated by an accessory bathorientated glass condenser for distillation ofto accelerate the process. The entire system has beensolvents with higher boiling points. 20% narrowerdesignedthan RE400 saving space.to be vacuum tight, an accessory vacuumpump can be connected to reduce the overall pressureand hence the boiling point of your sample. The RE402 rotary evaporator comes with averticallyorientated,coldfingerglasscondenser for use with ice or dry ice forvolatile or low boiling solvents. Providinga cooling solution without the necessity for aconstant supply of cooling water.RE400 with RE400DBPlastic coated versions of all configurations are also available, providing additional safety when using theglassware under vacuum. The plastic coating ensures, that operator injury is less likely, should any glasscomponent fail while under vacuum. The added security of a plastic coating also gives the operator sufficienttime to transfer any potentially dangerous chemicals to a suitable vessel without spillage.
Rotary EvaporatorsGlass set 00Diagonal coil condenser, Vapour tube for diagonal condenser, Receiving flask 1000ml, Florentine flask 1000ml,Feed tube with stopcock, Vacuum seal, Conical joint clip, Spherical joint clipGlass set 01Vertical coil condenser, Vertical coil adaptor, vapour tube for vertical condenser, Receiving flask 1000ml,Florentine flask 1000ml, Feed tube with stopcock, Vacuum seal, Conical joint clip, Spherical joint clip, Coolerholder, Support bar clamp, Cooler support barGlass set 02Dewar condenser, Vertical coil adaptor, Vapour tube for vertical condenser, Receiving flask 1000ml, Florentineflask 1000ml, Feed tube with stopcock, Vacuum seal, Conical joint clip, Spherical joint clip, Cooler holder,Support bar clamp, Cooler support barGlass set 00PDiagonal coil condenser plastic coated, Vapour tube for diagonal condenser, Receiving flask 1000ml plasticcoated, Florentine flask 1000ml plastic coated, Feed tube with stopcock, Vacuum seal, Conical joint clip,Spherical joint clipGlass set 01PVertical coil condenser plastic coated, Vertical coil adaptor plastic coated, vapour tube for vertical condenser,Receiving flask 1000ml plastic coated, Florentine flask 1000ml plastic coated, Feed tube with stopcock, Vacuumseal, Conical joint clip, Spherical joint clip, Cooler holder, Support bar clamp, Cooler support barGlass set 02PDewar condenser plastic coated, Vertical coil adaptor plastic coated, Vapour tube for vertical condenser,Receiving flask 1000ml plastic coated, Florentine flask 1000ml plastic coated, Feed tube with stopcock, Vacuumseal, Conical joint clip, Spherical joint clip, Cooler holder, Support bar clamp, Cooler support barTechnical SpecificationSpeed range1 0 t o 310rpmVa c u u m3 m m HgLift distance180mmDimensions (w x d x h)3 8 5 x 335 x 470-610mmElectrical supply1 0 0 - 2 4 0V, 50/60HzOrdering InformationModelDescriptionRE400R o t a r y e v a p o r a t o r c omplete with glass set 00RE401R o t a r y e v a p o r a t o r c omplete with glass set 01RE402R o t a r y e v a p o r a t o r c omplete with glass set 02RE400PR o t a r y e v a p o r a t o r c omplete with glass set 00PRE401PR o t a r y e v a p o r a t o r c omplete with glass set 01PRE402PR o t a r y e v a p o r a t o r c omplete with glass set 02Pw w w. s t u a r t - e q u i p m e n t . c o m
Glassware Accessoriesand SparesEvaporating (Florentine) flasks Florentine type flasks for use with all glassware sets. 29/32 socket.Ordering InformationModelDescriptionFD50/4REEvaporating flask 50mlFD100/4REEvaporating flask 100mlFD250/4REEvaporating flask 250mlFD500/4REEvaporating flask 500mlFD500/4REPEvaporating flask 500ml plastic coatedFD1L/4REEvaporating flask 1000mlFD1L/4REPEvaporating flask 1000ml plastic coatedFD2L/4REEvaporating flask 2000mlFD2L/4REPEvaporating flask 2000ml plastic coatedFlorentine FlaskReceiving flasks Receiving flasks for use with all glassware sets. S35 spherical socketOrdering InformationModelDescriptionRE100/RF/50Receiving flask 50mlRE100/RF/100Receiving flask 100mlRE100/RF/250Receiving flask 250mlRE100/RF/500Receiving flask 500mlRE100/RF/500PReceiving flask 500ml plastic coatedRE100/RF/1LReceiving flask 1000mlRE100/RF/1LPReceiving flask 1000ml plastic coatedReceiving Flask
Glassware Accessoriesand SparesReplacement parts for glassware sets3456714Glassware Replacement Parts111212101389Ordering 0/CONNECTJC35/1KCM29RE400/ADPTDiagonal condenser, glass set 00Diagonal condenser, plastic coated, glass set 00PVertical condenser, glass set 01Vertical condenser, plastic coated, glass set 01PCold finger condenser, glass set 02Cold finger condenser, plastic coated, glass set 02PFeed tube/ vacuum release, all glass setsVapour tube diagonal condensers, glass sets 00 & 00PVapour tube for vertical coil condensers, glass sets 01, 01P, 02, 02PVacuum seal, all glass setsPTFE screwthread connectors, all glass sets, pack of 2Spherical joint clip for receiving flask, all glass setsPlastic joint clip for evaporating flask, all glass setsAdaptor for VC/CF condenser
A c c e s s o r y Va c u u m P u m p sFixed pressure pump, RE3011CVariable vacuum pump, RE3022C Quiet operation, no vibration Maintenance free drive system Designed for permanent operation Light weight, rugged designThe RE3011C is a powerful, compact vacuum pump. It features arugged design combined with simple on/off operation, making itthe perfect choice for delivery of a quick, reliable vacuum.Both pumps offer a dry, oil free, vacuum from areliable maintenance free diaphragm pump. Eitherpump is therefore ideal for use with the Stuart rotaryevaporator or for any applications requiring vacuum.The RE3022C vacuum pump also offers a sure gauge and integrated catch pots.Technical ow rate18l/min18l/minAdjustable VacuumNoYesNet weight6.5kg9.5kgDimensions (w x d x h)195 x 225 x 147mm280 x 400 x 200mmElectrical supply230V, 50-60Hz230V, 50HzR E 3 0 2 2 C Va c u u m P u m pOrdering InformationModelDescriptionRE3011CVacuum pump, fixed pressureRE3022CVacuum pump, variable vacuumDigital baths,R E 3 0 1 1 C Va c u u m P u m p
Accessory BathsDigital water bath, RE400DBDigital oil bath, RE400OB Digital temperature display Corrosion resistant bowl Easy to clean Integrated carry handle (RE400DB) Cool touch outer caseThese precise digital baths have been specifically designed to be usedwith the Stuart rotary evaporators to give maximum efficiency forthe smallest footprint. The clear LED digital display shows the actualbath temperature or the set temperature. The RE400DB is suitable forlower temperature applications whereby the RE400OB can be usedwith oil for higher temperature evaporations. Both models featureouter case’s which are made from chemically resistant polypropylene.(Please note plastic coated glassware is limited to 80 C and thereforeRE400DB Digital Water Bathunsuitable for use with the RE400OB oil bath) Corrosion resistantstainless steel bowl.Technical SpecificationModelRE400DBRE400OBDescriptionDigital Water bathDigital Oil bathTemperature rangeRT to 90 oCRT to 180 oCDisplay resolution1 oC1 oCTemperature controlo 1 C 1.5 oC (water) 3 oC (oil)Integrated carry handleYesNoCapacity4.3 litres5 litresHeater power1400W1400WInternal dimensions220 x 120240 x 120Dimensions (mm)285 x 295 x 244282 x 282 x 244Electrical supply230V, 50Hz230V, 50-60HzØ x h (mm)Ordering InformationModelDescriptionRE400DBDigital water bathRE400OBDigital oil bathDigital baths,RE400OB Digital Oil Bath
Accessory RecirculatingCoolersSRC4 Recirculating Cooler Digitally set temperature Easy to read LED display Quiet operation Powerful 450W cooling capacity Safety cut out featureThe recirculating cooler offers powerful cooling for an external device. Byaccurately controlling the temperature of your cooling medium down to-20 C, efficiency of operations such as condensing can be greatly improved.A recirculating cooler is not only much more powerful than conventionalwater cooling, but is also an ideal alternative when water consumption isan issue for economical, environmental or practical reasons.The SRC4 provides a powerful cooler with a compact footprint suitablefor mounting on or under a bench. The LED digital display clearly showsthe current temperature of the cooling medium to 2 C, while the settemperature is revealed by a one button press.The unit has a dedicated drain for easy emptying and cleaning. It alsoincorporates a built in safety alarm to indicate an overload relay for therefrigeration unit. A dust filter is incorporated and can be accessed withouttools via the removable front panel.SRC4 Recirculating CoolerSRC14 Recirculating CoolerWith all the features of the SRC4 the SRC14 is ideal where larger volumes arerequired, or when extra cooling capacity is needed, electron microscopes forexample. The unit is floor standing with lockable easy roll castors to ensureexcellent mobility.Technical SpecificationModelSRC4SRC14Cooling capacity450W at 10ºC1050W at 10ºCTemperature range-20 to 30ºC-20 to 30ºCControl accuracy 2ºC 2ºCBath capacity3 litres16.5 litresPump rate9 litres / minute16 litres / minuteDimensions (w x d x h)232 x 497 x 490mm354 x 384 x 851mmNet weight25kg43kgElectrical supply230V, 50Hz230V,50HzOrdering InformationModelDescriptionSRC4Recirculating cooler, 3 litre capacitySRC14Recirculating cooler, 16.5 litre capacitySRC14 Recirculating Coolerw w w. s t u a r t - e q u i p m e n t . c o m
A Rotary evaporator is a distillation unit that incorporates an efficient condenser with a rotating sample flask. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, the sample or Florentine
