WIXLIB

BackCOLOR DGPS/PLOTTERCOLOR GPS/PLOTTERGP-1850WD, GP-1850W FURUNO/NAVIONICSGP-1850WD, GP-1850W FURUNO/C-MAP NT

The paper used in this manualis elemental chlorine free.Your Local Agent/Dealer9-52 Ashihara-cho,Nishinomiya 662-8580, JAPANTelephone :0798-65-2111Fax0798-65-4200:All rights reserved.Printed in JapanFIRST EDITION : AUGAUG. 2002B1Pub. No. OME-44250( TATA ) GP-1850W/1850WD: APRAPR. 13, 50B10**OME44250B10**OME44250B10*

SAFETY INSTRUCTIONSWARNINGCAUTIONDo not use the equipment for other thanits intended purpose.Do not open the equipment.Hazardous voltage which can causeelectrical shock, burn or serious injuryexists inside the equipment. Only qualifiedpersonnel should work inside the equipment.No one navigation device should ever besolely replied upon for the navigation ofa vessel.Do not disassemble or modify theequipment.Always confirm position against all availableaids to navigation, for safety of vessel andcrew.Fire, electrical shock or serious injurycan result.Use the proper gain setting.Immediately turn off the power at theswitchboard if the equipment is emittingsmoke or fire.Incorrect gain may produce wrong depthindication, possibly result ing in adangerous situation. See "Adjusting thegain" on page 2-6.Continued use of the equipment can causefire or electrical shock. Contact a FURUNOagent for service.The picture is not refreshed whenpicture advancement is stopped.Do not operate the equipment with wethands.Maneuvering the vessel in this conditionmay result in a dangerous situation.Electrical shock can result.A warning label is attached to the equipment. Do not remove the label. If thelabel is missing or illegible, contacta FURUNO agent or dealer.Use the proper fuse.Fuse rating is shown on the power cable.Use of a wrong fuse can result in damageto the equipment.WARNINGTo avoid electrical shock, do notremove cover. No user-serviceableparts inside.About the TFT LCDThe TFT LCD is constructed using thelatest LCD techniques, and displays99.99% of its pixels. The remaining 0.01%of the pixels may drop out or blink, however this is not an indication of malfunction.iName: Warning Label (1)Type: 86-003-1011-1Code No.: 100-236-231

TABLE OF CONTENTS4.44.5FOREWORD . ivSYSTEM CONFIGURATION . vWHAT IS WAAS?. vi1.OPERATIONAL OVERVIEW1.11.21.31.41.51.61.71.81.9Display Unit Controls .1-1Remote Controller.1-2Inserting Mini Chart Card .1-3Turning the Power On/Off .1-3Adjusting Tone and Brilliance .1-4Plotter Displays.1-5Steering/Highway Displays .1-5Menu Operation, Soft Keys .1-6Demonstration Display.1-72.PLOTTER ation Modes .2-1Cursor.2-2Shifting the Display .2-2Displaying Nav Information Window2-2Selecting Chart Scale/Range .2-3Mini Chart Cards.2-3Navigation Data Display.2-6Steering Display.2-7Highway Display .2-8Changing Operation Mode .2-9Navigation Trip Distance .2-103.TRACK3.13.23.6Displaying Track .3-1Stopping/Restarting Plottingof Track.3-1Changing Track Color .3-2Track Plotting Method, Interval.3-2Changing Track MemoryCapacity.3-3Erasing Tracks.3-44.MARK4.14.24.3Entering Marks.4-1Changing Mark Attributes.4-2Changing Mark Size.4-33.33.43.54.6Erasing Marks . 4-3Displaying Track and MarkPoints . 4-4Target Mark . 4-45.WAYPOINTS5.15.25.35.45.55.6Entering Waypoints . 5-1Erasing Individual Waypoints. 5-4Changing Waypoint Data. 5-5Changing Waypoint Position onthe Plotter Display . 5-5Waypoint Mark Size. 5-6Searching Waypoints. 5-66.ROUTES6.16.26.36.46.5Entering Routes. 6-1Connecting Routes. 6-2Inserting, Removing Waypoints . 6-3Creating Track-based Routes. 6-5Erasing Routes. 6-67.NAVIGATION7.17.27.47.5Navigating to “Quick Points” . 7-1Navigating to Waypoints(waypoint list) . 7-2Navigating to Ports, PortServices . 7-2Following a Route. 7-4Canceling Navigation . 7-68.PLOTTER ALARMS8.18.28.38.48.58.68.78.8Introduction . 8-1Audio Alarm On/Off . 8-1Arrival Alarm. 8-2Anchor Watch Alarm. 8-2XTE (Cross Track Error) Alarm. 8-3Speed Alarm . 8-3Proximity Alarm . 8-3Alarm Information . 8-49.MEMORY CARD OPERATIONS9.19.29.3Formatting Memory Cards. 9-1Saving Data to Memory Card . 9-2Loading Data from Memory Card . 9-37.3ii

TABLE OF CONTENTS10. CUSTOMIZING YOUR UNIT10.1 CHART SETUP OPTIONS menu 10-110.2 DISPLAY OPTIONS menu . 10-310.3 GPS/DGPS/TD OPTIONSmenu. 10-410.4 CONFIGURATION menu. 10-811. USING C-MAP NT MODEL11.111.211.311.4Inserting Chart Card . 11-1Cursor and Data Display . 11-2Tidal Information. 11-3Navigating to Ports, PortServices . 11-411.5 Setting Chart Setup Options. 11-611.6 Selecting Chart Scale/Range . 11-711.7 Displaying Program Number . 11-812. MAINTENANCE e. 12-1Replacement of Fuse, Battery . 12-2Simple Troubleshooting. 12-2Error Messages. 12-3Diagnostic Tests . 12-3Clearing Memories . 12-6APPENDIXMENU TREE .A-1LORAN C CHAINS.A-3DECCA CHAINS .A-4WORLD TIME .A-5GEODETIC CHART LIST .A-6SPECIFICATIONS. SP-1INDEXDECLARATION OF CONFORMITYiii

FOREWORDA Word to GP-1850WD/1850WOwnersNavigation information is displayed on abright 6.5-inch color TFT LCD. On-screeninformation shown are position, range andbearing to cursor position, range, bearing,ETA and TTG to waypoint, etc.A high sensitivity receiver tracks up to twelve(WAAS: thirteen) satellites simultaneously.An 8-state Kalman filter ensures optimumaccuracy in determination of vessel position,course and speed.Congratulations on your choice of theFURUNO GP-1850WD COLORDGPS/PLOTTER, GP-1850W COLORGPS/PLOTTER. We are confident you willsee why the FURUNO name has becomesynonymous with quality and reliability.For over 50 years FURUNO ElectricCompany has enjoyed an enviablereputation for innovative and dependablemarine electronics equipment. Thisdedication to excellence is furthered by ourextensive global network of agents anddealers.C-MAP NT-FP chart card is available for theGP-1850WD/1850W.The main features of theGP-1850WD/1850W are WAAS capability. Comprehensive navigation data displays.This equipment is designed and constructedto meet the rigorous demands of the marineenvironment. However, no machine canperform its intended function unless installed,operated and maintained properly. Pleasecarefully read and follow the recommendedprocedures for operation and maintenance. Bright 6.5-inch color TFT LCD withtemperature compensated tone andbrilliance control. Automatic coastline chart loading. Position display in latitude and longitude,Loran C or Decca TDs.We would appreciate hearing from you, theend-user, about whether we are achievingour purposes. Improved position accuracy with optionalThank you for considering and purchasingFURUNO equipment.chart card or FURUNO and C-MAP NTmini chart cards.DGPS beacon receiver (GP-1850W). Accepts both FURUNO and NAVIONICS Alarms: Arrival, Anchor Watch, Cross-trackFeaturesError, Speed and Proximity. Man overboard feature records latitudeThe GP-1850WD provides a totallyintegrated DGPS beacon receiver, WAASfunction, GPS receiver and color videoplotter. The GP-1850W mostly shares thesame features with the GP-1850WD exceptit does not have a DGPS beacon receiver.and longitude coordinates at time of manoverboard. “Highway” display provides graphicpresentation of ship’s track and is usefulfor monitoring cross track error.iv

SYSTEM TENNA UNITReceives signal fromGPS satellite and beaconreference station.(GP-1850WD only)DISPLAY UNITExternal equipment(Autopilot, etc.)DGPS beacon receiver(GP-1850W only)RectifierPR-62Ship's mains100/110/115/220/230 VAC1 , 50/60 HzShip's mains12-24 VDCThis GPS receiver complies with Canadian standard RSS-210 (Low PowerLicense-Exempt Radio communication Devices).Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that maycause undesired operation of the device.v

WHAT IS WAAS?WAAS, available in North America, is a provider in the worldwide SBAS (Satellite BasedAugmentation System) navigation system. An SBAS provider furnishes GPS signal correctionsto SBAS users. Two more SBAS providers are also currently under development, MSAS(Multi-Functional Satellite Augmentation System) for Japan and EGNOS (Euro GeostationaryNavigation Overlay Service) for Europe. All providers will be compatible with one another, thusproviding “seamless” position fixes to SBAS users.150 W120 W90 W60 W30 W030 E60 E90 E120 E150 E60 N60 N40 NEGNOSMSAS40 N20 N20 N12201201341310WAAS20 S20 S40 S40 S60 S60 S150 W120 WSatellite, Region120, AOR-E122, AOR-W131, IOR134, POR90 W60 W30 W0Position15.5 W54 W64.5 E178 E30 E60 E90 E120 E150 EInitial operation timeWAAS: 2003EGNOS: 2004MSAS: 2005At the time of this software release, SBAS is still under development. (Providers are expected tohave initial operations capability from the times shown above.) During this developmental period,which may last for several years, there is no guarantee of the accuracy, integrity, continuity, oravailability of the SBAS signal. Furuno will accept no responsibility for the use of the signal forother than the above stated purpose. It is the user’s responsibility to exercise commonprudence and navigational judgment while using the SBAS signal in the developmental phase.Note: This manual uses “WAAS” when referring to any SBAS provider.vi

1. OPERATIONAL OVERVIEWThis chapter acquaints you with the basics of your unit - from turning on the power to the softkey menu operation.1.1Display Unit Controls Registers own ship's positions. Marks man overboard position, event position.Cursor pad Shifts cursor and display. Selects items on menus.Registers itemson menus.SAVEMOBENTERSoft key's functions changedepending on the HI3JKL4MNO5PQR6STU7VWX8YZ&9CLEAR'#0MENUEnter alphanumeric data.Opens/closesthe main menu.Mini chart card slot.HIDESHOW Clears data. Erases selected waypoint. Silences audible alarm.Displays/hides the soft key menu,nav data, mode indication.Displays the waypoint & routemenu.Alternately selects Steering display andHighway display.Alternately selects Plotter displayand Navigation data display.Displays the alarm menu. Long press: Turns power off. Touch and release: Turns power on.Opens the window for adjustment of tone and brilliance.Display unit1-1

1. OPERATIONAL OVERVIEW1.2Remote ControllerInscribes waypoints.MOBInscribes MOBmark.SAVE ALARMSW 1ABC 1DEF 2SW 2JKL 4MNO 5 PQR 6SW 3STU 7VWX 8YZ 9SW 4ENTER'#0MENUSW 5CLEARDisplays alarmmenu.GHI 3Enter, cancel, clearalphanumeric data.Soft keysShows/hides softkey menu.ZOOM IN/OUTExpand, shrinkchart.SHOW CANCELHIDEAdjust brilliance.BRILLFunctions sameas cursor pad.CENTERAdjust tone.TONEPLOTXTE/HIWAYWPTRTEDisplays the waypoint &route menu.Note: The remote controller isnot waterproof. Keep it in itsvinyl case always.SelectsPlotter orSelectsNavigation data Steering ordisplay.Highway display.Remote controller1-2

1. OPERATIONAL OVERVIEW1.3Inserting Mini ChartCardInsert appropriate mini chart card beforeturning on the power.Note: Static electricity can be passedthrough your fingers to a memory cardand destroy the contents of the card.To prevent this, always touch ametallic object, such as a steel desk,before handling a memory card.1.4Turning the PowerOn/OffTurning the power onPress the [POWER/BRILL] key at bottomleft-hand side of the display unit to turn onthe power. When the unit is turned on, itproceeds in the sequence shown in thefigure in below, after displaying the FURUNOinformation display.Displayed for about five seconds.START UP TESTPROGRAM1. Push down the lid catch to open the minichart card slot cover.OKRAMOKBACKUP DATAOKINTERNAL BATTERYOKGPSOK- - WARNING - -Card slotLocation of mini chartcard slot cover2. Insert appropriate mini chart card grooveside up.Inserting grooveside up.NO NATIONAL HYDROGRAPHIC OFFICEHAS VERIFIED THE INFORMATIONIN THIS COASTLINE DATA CARD ANDNONE ACCEPT LIABILITY FOR THEACCURACY OF REPRODUCTION OR ANYMODIFICATIONS MADE THEREAFTER.THIS PRODUCT WITH THIS COASTLINEDATA CARD DOES NOT REPLACE THEREQUIREMENT TO USE THEAPPROPRIATE PRODUCTS FORNAVIGATION

FURUNO GP-1850WD COLOR DGPS/PLOTTER, GP-1850W COLOR GPS/PLOTTER. We are confident you will see why the FURUNO name has become synonymous with quality and reliability. For over 50 years FURUNO Electric Company has enjoyed an enviable reputation for innovative and dependable marine electronics equipment. This dedication to excellence is furthered by our extensive global