Transcription
Iseo Master Key Solu/ons
R6MASTER KEYINGApproximate Master Keyingcapabili/es are as follows:Simple MK and differs allowsfor approx. 80 differs under asingle Master Key*It can be possible to dividethe master key system intosub groups. This reduces thenumber of differs available asthey have to be split betweenthe sub groups**The addi4on of a common entrance reduces thediffer capability in every case above
R50MASTER KEYINGApproximate Master Keyingcapabili/es are as follows:Simple MK and differs allowsfor up to 60000 differs undera single Master Key*It can be possible to dividethe master key system intosub groups. This reduces thenumber of differs available asthey have to be split betweenthe sub groups**The addi/on of a common entrance reduces thediffer capability in every case above
KEY SECTIONS AND RESTRICTIONSF6 EXTRA S . Has all the same features and master keying capabili/es ofstandard F6 Extra but with the added security features of a sacrificial cut on thebody of the cylinder and a strengthening bar across the centre.R6 .This is an “open sec/on” key profile. This means that a copy key blank canbe purchased through most lock wholesalers and therefore is medium security askeys can be copied without restric/on. However this key has a type of “innerrestric/on "as it can only be cut by locksmiths who possess the technically advancedkey cuQng machinery.In the case of master key suites produced by M. Marcus Ltd, we do restrict their saleand distribu/on and will not sell master keys or extra cylinders to anyone other thanthe client who ordered the original suite. However, the supply route can be changedon the produc/on of an authorising leTer from the end user/owner of the suite(accompanied by leTer head). We do have the ability to engrave this key blank withthe customers name and telephone number when ordering a minimum of 500 keyblanks and when authorised by management at M.Marcus Ltd. This range of productis supplied to M. Marcus Ltd in fully assembled format by Iseo
KEY SECTIONS AND RESTRICTIONSR50. This is a “patented” key profile and cylinder range and is completely restricted and istherefore listed as higher level security. The genuine Iseo blanks will only be supplied todedicated M.Marcus Ltd /Iseo registered key centres so there is complete control andtherefore offers "total restric/on” as it is a key profile produced only for the UK market. Again,this key has a type of “added restric/on“ as it can only be cut by locksmiths who possess thetechnically advanced key cuQng machinery. The cylinder and Key have patent protec/on un/lend of 2020.In the case of master key suites produced by M.Marcus Ltd, we do restrict their sale anddistribu/on and will not sell master keys, differ keys or extra cylinders to anyone other than theclient who ordered the original suite. However, the supply route can be changed on theproduc/on of an authorising leTer from the end user/owner of the suite (accompanied byleTer head).R50 differ cylinders which are NOT part of a master key suite will also be subject to the samerestric/ons. M. Marcus Ltd keep a record of EVERY R50 differ cylinder. We allocate a uniquediffer number and issue a key card showing the unique reference. We will only supplyaddi/onal keys/cylinders KA to an R50 differ number to the client to whom the original orderwas supplied. The end user may request an amendment to the supply route on produc/on of aleTer of authorisa/on AND the key card.PLEASE NOTE: We only sell these key blanks to registered Iseo Service Centres. These servicecentres are allocated a “centre number “ which will automa/cally be engraved on the blanks aswell as name and telephone number. This range of product is only available from Iseo in subassembled component format so all products are constructed by M.Marcus Ltd.
NUMBER OF KEYS PER MASTER KEYED/KEYED ALIKE CYLINDERF532F6Extra32F632R6SR2,3&432R11SR2, 3,4, 5&632R50SR2, 3,4, 5&622N/AExtraSKEY ENGRAVING AVAILABLEAVAILABLE SUB ASSEMBLEDSTRENGTHENING BARSACRIFICIAL CUTPATENTED KEYPARTIAL KEY RESTRICTIONFULL KEY RESTRICTIONMK SUITE PROTECTIONSUITABLE FOR USE ON 30/60 FIREDOORS TESTED TO BS EN1634-1SECURED BY DESIGNLOSS PREVENTION STANDARD LPS1175BS EN1303 TS007 1 STAR (KM 544418)ATTACK RESISTANCEKEY RELATED SECURITYCORROSION RESISTANCE ANDTEMPERATURESAFETYFIRE RESISTANCEDOOR MASSKEY STRENGTH AND CYCLIC DURABILITYNUMBER OF KEYS PER DIFFER CYLINDERCATEGORY OF USEEN1303 CLASSIFICATIONS
MASTER KEYING Approximate Master Keying capabili/es are as follows: Simple MK and differs allows for approx. 80 differs under a single Master Key* It can be possible to divide the master key system into sub groups. This reduces the number of differs available as they have to be split between the sub groups*
