Transcription
1-800-633-0405CLICK PLC Family OverviewFor the latest prices, please check AutomationDirect.com.CLICK PLUS PLC Units and Option Slot ModulesCLICK PLUS PLC UnitsCommunication PortsNumberofOption ort 1)RS-232(Port 2)RS-485(Port CPUC2-01CPU-216.5mA236.5mAC11IN 24VIN 24VC1234C2C2516273OUT 5-27V4 VOUT 5-27VAD1V1AD1 I0.1AAD2 I34AD2VACOMDA1V5DA1 I6DA2V VDA2 IOUT 4-20mA / 0-5VC4C2-14xxIN 4-20mA / 0-5VC32Part NumberC2-08xx-4VC8 DC (sink/source)8 points .5mA236.5mA1IN 24VC12IN 24VC1344OUT 5-27VOUT 5-27VC2C211240.1A30.1A324 VC2-08AR-4VC*C2-08D1-6C VIN 0-20mAAD1VAD2VAD3 IAD3VAD4 IAD4VDA2 IACOMDA1VDA2VACOMACOMC2-08xx-6COUT 0-10VDA1 IOUT 4-20mADA VIN 0-10VAD2 -6CRXTX6 DC (source)3 points high-speed** 93.00YesYes 145.00 186.00 197.00Yes 245.00C2-03CPUC2-03CPU-2C2-08AR-6CC2-08D1-6V4 DC(sink/source)4 points high-speed**4 DC (sink)2 points high-speed**4 DC (source)2 points high-speed**4 relay4 AC4 DC(sink/source)4 points high-speed**4 DC (sink)2 points high-speed**4 DC (source)2 points high-speed**Analog Output Types4 DC(sink/source)4 points high-speed**4 DC (sink)2 points high-speed**4 DC (source)2 points high-speed**NoneNone 56.00 67.00 67.002 channel;voltage (0–5 VDC) /current (4–20 mA);selectable separatelyper channel, 12-bit2 channel;voltage (0–5 VDC) /current (4–20 mA);selectable separatelyper channel, 12-bit 87.00 87.00 99.00 99.00 87.004 channel;current (0–20 mA),12-bit2 channel;current (4–20 mA),12-bit 87.00 99.00 99.00 87.004 channel;voltage (0–10 VDC),12-bit2 channel;voltage (0–10 VDC),12-bit4 relay4 ACPrice 56.004 relay4 ACC2-08DR-6VC2-08AR-6VAnalog Input Types6 relay8 ACC2-08DR-6CC2-08D2-6VC2-DCMRXPrice 131.006 DC (sink)3 points high-speed**C2-08DR-4VC*ACOMAD1 IDiscrete Output TypesC2-14DRC2-08D2-4VC*C2-08D1-6CDiscrete Input TypesC2-14D10.1A48Run-TimeEditCLICK PLUS Option Slot I/0 ModulesC2-08D1-4VCC2-14D1C2-02CPU-2BatteryBackup 87.00 99.00 99.00* -4VC Option Slot modules require that you select analog I/O type (voltage or current) in the CLICK programming software.** High-speed Inputs and Outputs are only available when the Option Slot I/O Module is installed in Slot 0.RS-485TXRXCLICK PLUS Option Slot Intelligent ModulesRS-232PORT2TERMLGRXC2-DCMPart ceCommunications module, 2x RS-232/RS-485 ports,supports Modbus RTU and ASCII protocols 113.00CLICK PLCstCLP-3
For the latest prices, please check AutomationDirect.com.1-800-633-0405CLICK PLUS PLC SpecificationsPLC Unit Specifications (continued)CLICK PLUS PLC Unit SpecificationsC2-01CPUC2-01CPU-2Control MethodFixed in DecimalLadder Memory (steps)80008000 0.2 µsContact Execution (boolean) 1msTypical Scan (1k boolean)YesRLL Ladder Style ProgrammingYesRun Time EditsVariable / fixedScan1 (RUN/STOP)PLC Mode SwitchC2-01CPUStandard on PLCFLASH MemoryProtocolModbus RTU (master/slave)YesNoYesASCII (in/out)YesNoYesModbus TCP (client server)YesYesYesEtherNet/IP Implicit andExplicit (adapter server)YesNoYes*MQTTData LoggingCLICK Programming SoftwareNumber of Instructions d Program/Cyclic execution methodI/O Numbering SystemTotal Data Memory (words)C2-01CPU-2C2-02CPUC2-02CPU-2Publisher: 4 publishers, 3 blocks eachSubscriber: 10 blocksN/AN/AYes (Windows)21Control Relays2000System Control Relays1000Timers500Counters250InterruptYes (external: 8 / timed: 4)SubroutinesYesFor/Next LoopsYesMath (Integer and Hex)YesDrum Sequencer InstructionYesInternal DiagnosticsYesPassword SecurityYesSystem Error LogYesUser Error LogTime, date,16 addressesNoMemory BackupSuper capacitor batteryBattery BackupYes (battery part #D0-MC-BAT)Calendar/ClockYes* EtherNet/IP available on the Ethernet RJ45 port only. Not available over ICK PLCstCLP-20
For the latest prices, please check AutomationDirect.com.1-800-633-0405CLICK PLUS PLC SpecificationsPLC Unit Specifications (continued)CLICK PLUS PLC Unit SpecificationsC2-01CPUC2-01CPU-2C2-02CPUI/O SlotOption Slot SupportYes, 1Yes, 2Yes, 1StatusIndicatorsYes, 2NoYes (10/100)YesNoYesNoSerial Port RS-485 (terminal block)YesWLANNoBluetoothNoYes (RP-SMA connection for optional external antenna,shared)WLAN Status LEDNone1Bluetooth Status LEDNone13 (PWR/RUN/ERR)CPU Status LEDEthernet Status LED2 (LINK/ACT 10/100)None2 (LINK/ACT 10/100)2 (TX/RX)None2 (TX/RX)SD Card Status LEDNone1NoYesMicroSD Card Slot (SDHC-compatible)24VDC (4-pin terminal block)Nominal Input VoltageOperating Voltage Range24VDC, Class 2 or SELV (Safety Extra-Low Voltage) or Limited Energy Circuit power supply20.0–28.0 VDCInput Voltage Range30A @ 1msMaximum Inrush CurrentPower ConsumptionPowerYes, 1Yes, 2Yes (10/100)Serial Port RS-232 (RJ12)Serial Status LEDOtherC2-03CPU-2Yes (device)(For programming and providing 5VDC power, microB USB)USB Port (programming)Com. PortsC2-03CPUYes (max. 8 modules)Expansion I/OEthernet (RJ45)C2-02CPU-2N/A (optional)Internal I/O20W22W22W110mA120mA105mA115mA140mAPower input is reverse polarity protectedPolarity Protection5VDC (via USB programming port)USB SupplyN/ACommunication Port & Terminal Block ReplacementAutomationDirectp/n C0-3TBN/AAutomationDirect p/n C0-4TB24VDC Power Terminal Block Replacement2.4 GHz antenna, RP-SMA connector(AutomationDirect p/n SE-ANT250 or SE-ANT210)N/AAntenna l Fuse RecommendedWeight22WNoneFuseDrawing Link20WMax 10ms (AC power failure with C0-00AC or C0-01AC)Acceptable External Power DropCurrent Required20WPDFPDFPDFPDFPDFPDF3.5 oz [99g]4.0 oz [114g]3.3 oz [94g]3.8 oz [109g]4.0 oz [114g]4.6 oz [129g]CLICK PLCstCLP-21
For the latest prices, please check AutomationDirect.com.1-800-633-0405CLICK PLUS PLC SpecificationsGeneral SpecificationsFor All CLICK PLUS PLCProductsThese general specifications apply toall CLICK PLUS PLCs. Please refer to theappropriate I/O temperature deratingcharts under the Option Slot moduleand Stackable I/O module specificationsto determine best operating conditionsbased on the ambient temperature ofyour particular application.General SpecificationsOperating TemperatureStorage TemperatureAmbient Humidity30% to 95% relative humidity (non–condensing)Environmental AirNo corrosive gases. Environmental pollution level is 2 (UL840)EnvironmentVibrationShockVoltage Withstand (Dielectric)Insulation ResistanceNoise ImmunityEmissionsAgency ApprovalsRadio StandardsOtherwww.automationdirect.com32 F to 131 F [0 C to 55 C]–4 F to 158 F [–20 C to 70 C]IEC 60068-2-1 (Test Ab, Cold)IEC 60068-2-2 (Test Bb, Dry Heat)IEC 60068-2-14 (Test Na, Thermal Shock)For Indoor Use OnlyIEC60068-2-6 (Test Fc)5–9Hz:3.5mm amplitude, 9–150Hz 1.0G10 sweep cycles per axis on each of 3 mutually perpendicular axes.IEC60068-2-27 (Test Ea)15G peak, 11ms duration, 3 shocks in each direction per axis,on 3 mutually perpendicular axes.1000VAC, 1 minute (between G and 24V IN)500VDC, 10M ohm (between G and 24V IN) EN61131-2 EN61000-4-2 (ESD): 4 kV(Contact Discharge)8kV(Air Discharge)EN61000-4-3 (RFI): 1 0V/m (80MHz–1GHz) ,3V/m (1.4 GHz–2.0 GHz)1V/m (2.0 GHz–2.7 GHz)EN61000-4-4 (FTB) : 2 kV ,positve/negative , 5kHz (DC Power Port)1kV ,positve/negative, 5kHz (I/O andCommunication Port)EN61000-4-5 (Surge): 0 .5 kV/1kV line to line0.5 kV/1kV line to earthEN61000-4-6 (Conducted): 10V ,0.15 MHz – 80MHzEN61000-4-8 (Power frequency magnetic field immunity) : 30A/m Local Test Impulse Immunity : 1000V @ 1µs pulseEN55011 Class A (Radiated RF emission)UL61010 (File No. E157382, E316037); CE (EN61131-2);CUL Canadian C22.2FCC part15C (US), RED Article3.2 (CE), IC RSS-247 (Canada),MIC Item 19 of Article 2-1 (Japan), AS/NZS 4268 (Australia/NewZealand)RoHS 2011/65/EU Amendment (EU)2015/863CLICK PLCstCLP-19
For the latest prices, please check AutomationDirect.com.1-800-633-0405CLICK PLUS PLC SpecificationsCLICK PLUS PLC Hardware/Software CompatibilityThe table below shows the minimum software and hardware versions required for the CLICK PLUS PLCs andOption Slot Modules. The CLICK PLUS PLC can also utilize the CLICK Stackable I/O Modules, as any software andhardware version compatible with CLICK PLUS is also compatible with the CLICK Stackable I/O Modules.CLICK PLUS PLC Features Software CompatibilityMinimum CLICK Software VersionDevice TypePart dOutputs*C2-01CPUC2-02CPUCLICK PLUS AC2-08D1-4VCC2-08D2-4VCC2-08DR-4VCOption SlotI/O 2-6VC2-08DR-6Vv3.00C2-08AR-6VOption SlotIntelligent 00N/AC2-03CPU-2C2-14D2PID, DHCP, DNS, 30N/Av3.30N/Av3.30N/AN/A* High-speed Inputs and Outputs are only available when the Option Slot I/O Module is installed in Slot 0.www.automationdirect.comCLICK PLCstCLP-22
1-800-633-0405CLICK PLC Family OverviewWhat you’ll needOf course, what you’ll need for yoursystem depends on your particularapplication, but this overview shows youwhat you’ll need for a simple system.For the latest prices, please check AutomationDirect.com.1. Select your CLICK or CLICK PLUS PLC unit.IN 24VC112Slot Module if desired.6.5mA2. If using a CLICK PLUS PLC, select an OptionC2-14D134C25678OUT 5-27VC31240.1A3C456 V3.4.5.6.If you need additional I/O, select from 24 differenttypes of Stackable I/O modules.Select a 24VDC power supply.orDownload the FREE CLICKprogramming ckplcs.htmlDownload the FREE CLICK mobile app.The CLICK mobile app is available for iOS andAndroid. It can connect to your C2-02CPU orC2-03CPU over Bluetooth to provision the PLConto a Wi-Fi network. (PLC requires an externalantenna)www.automationdirect.comCLICK PLCstCLP-10
1-800-633-0405CLICK PLC Family OverviewFor the latest prices, please check AutomationDirect.com.What you’ll need (continued)7.Select your PC-to-PLC programming cable.If your PC has a USB port, use cable EA-MG-PGM-CBL to connect to the PLC port. If your PC has a 9-pin serialcommunications port, use programming cable D2-DSCBL. If your PC has an Ethernet port, use C5E-STPYL-C3(crossover) or C5E-STPYL-S3 (straight through) Ethernet cable. If your PC is on a network with a wireless accesspoint, you can connect using one of our Wi-Fi anteannas.C5E-STPYL-C3 (crossover)C5E-STPYL-S3 (straight through)USB-CBL-AMICB6For Ethernet PLC UnitorUSB A to USB microBProgramming Cable Assembly(CLICK PLUS Only)SE-ANT250Wi-Fi/Bluetooth Dome Antenna(C2-02CPU & C2-03CPU only)D2-DSCBL(PC requires RS-232 portto use this cable)orEA-MG-PGM-CBLConnects to PC USB PortorSE-ANT210Wi-Fi/Bluetooth Whip Antenna(C2-02CPU & C2-03CPU only)(nonmetal enclosure only)8.Select tools, wire, and provide omWire StrippersDN-WSHookup WireCLICK PLCstCLP-11
For the latest prices, please check AutomationDirect.com.1-800-633-0405Power SuppliesPower SuppliesCLICK 24VDC Power Supply RatingsThe CLICK PLC family offers two 24VDC powersupplies. They are identical except for the outputcurrent.Part NumberIt is not mandatory to use one of these CLICKpower supplies for the CLICK/CLICK PLUS PLCsystem. You can use any other 24VDC powersupply that Automationdirect.com offers,including the PSP24-DC12-1 12 to 24 VDCconverter shown below.C0-00ACPrice0.5 A 38.50C0-01AC1.3 A 52.00Power Supply Input SpecificationsPart NumberInput Voltage RangeInput FrequencyC0-00AC Power SupplyLimited auxiliary AC power supply allows you topower the 24VDC CLICK C0 and C2 series PLCswith 100–240 VAC supply power. The 0.5 A DCpower supply is capable of controlling the PLCplus a limited configuration based on the powerbudget of each I/O module. The C0-00AC isa low-cost solution for applications requiringonly minimal I/O and power consumption. Thispower supply will not support a fully-populatedCLICK PLC system with all possible I/O modulecombinations.Input Current (typical)Inrush CurrentEfficiencyC0-01ACPart NumberOutput Voltage RangeOutput CurrentRippleRipple NoiseC0-00ACC0-01AC23–25 VDC0.5 A1.3 A200mV p-p max (0–55 C)300mV p-p max (0–55 C)@ 0.65 A@ 1.6 AOver Current Protection(automatic recovery) (automatic recovery)Over Voltage Protection@ 27.6 V (clamped by Zener diode)Start-up Time1000ms max at rated input and loadHold-up Time10ms minimum at 85VAC, I maxPower Supply General SpecsPart NumberAmbient OperatingTemperatureStorage TemperatureHumidityVibration ResistanceShock ResistanceVoltage lation se ImmunityPSP24-DC12-1 DC-DC ConverterWith this DC-DC converter you can operate theCLICK/CLICK PLUS PLC with 12VDC input power.CLICK PLCInput/Output InterfaceAgency ApprovalsDrawing LinkWeightC0-00ACC0-01AC32–131 F [0–55 C]-4–158 F [-20–70 C]30–95%, non-condensingJIS C60068-2-6, sine wave vibrationJIS C60068-2-271500VAC, 5mA cutoff current1500VAC, 5mA cutoff current500VAC, 5mA cutoff current10MΩ minimum, 500VDC10MΩ minimum, 500VDC5MΩ minimum, 500VDCFCC Class A, EN55022:1998 Class A5P terminal block, Fujicon UF2362AXseries or equivalentUL508, UL1604, EN61010-1 (IEC 1010-1),CAN/CSA E60079-15:02, JIS C0025PDFPDF5.3 oz [150g]6.0 oz [170g]PSP24-DC12-1 DC-DC Converter Specs24V0VInput Voltage RangeInput Power (no load)Startup VoltageUndervoltage ShutdownOutput Voltage RangeOutput CurrentShort Circuit ProtectionDrawing LinkWeightG24VDC power is supplied to the PLC unit through wiringconnected from the power supply output to the 4-pin 24VDCinput connector located on the bottom of the PLC 4 VAC47–63 Hz0.3 A @ 100VAC,0.9 A @ 100VAC,0.2 A @ 200VAC0.6 A @ 200VAC30A80% typicalPower Supply Output SpecsC0-01AC Power SupplyExpanded auxiliary AC power supply allows youto power the 24VDC CLICK C0 and C2 series PLCswith 100–240 VAC supply power. The 1.3 A DCpower supply is capable of supporting a fullypopulated CLICK PLC system with all possible I/Omodulecombinations, with no concerns for exceeding thepower budget.CLICK Power SupplyOutput CurrentC0-00ACPSP24-DC12-19.5–18 VDC1.0 W max.8.4 VDC7.6 VDC24–28 VDC (adjustable)1.0 ACurrent limited at 110% typicalPDF7.5 oz [213g]CLICK PLCstCLP-16
For the latest prices, please check SER-M 0.00CLICK PLUS PLC Hardware User ManualManual covers all CLICK PLUS PLCand I/O module installation andwiring, specifications, error codes andtroubleshooting guide. The CLICK PLUSPLC Hardware User Manual can bedownloaded free at the AutomationDirectWeb site; www.AutomationDirect.comEA-MG-PGM-CBL 50.00PC to Panel Programming CableAssembly for C-more Micro-GraphicPanels and CLICK/CLICK PLUS PLCsThe 6-ft cable assembly connects apersonal computer to any C-more MicroGraphic panel, CLICK PLC, or select CLICKPLUS PLC for setup and programming.Note: This cable assembly uses the PC’s USB port andconverts the signals to serial transmissions. The USB portsupplies 5VDC to the Micro-Graphic panel for configurationoperations.Assembly includes standard USB A-typeconnector to B-type connector cable,custom converter, and an RS232C cablewith an RJ12 modular connector oneach end.C0-3TB 9.25Spare 3-Pole Terminal BlockReplacement 3-pole terminal block for the3-wire RS-485 Port 3 on CLICK Standardand Analog PLCs as well as the CLICKPLUS C2-03CPU. Sold in packs of 2.C0-4TB 9.25Spare 24VDC Power Terminal BlockReplacement terminal block for the24VDC supply power to the PLC. Sold inpacks of 2.C0-USER-M 0.00CLICK PLC Hardware User ManualManual covers all CLICK PLC andI/O module installation and wiring,specifications, error codes andtroubleshooting guide. The CLICKPLC Hardware User Manual can bedownloaded free at the AutomationDirectWeb site; www.AutomationDirect.comC0-8TB 15.50Spare 8-Point I/OTerminal BlockUSB-CBL-AMICB6 5.00USB A to USB microB ProgrammingCable Assembly (CLICK PLUS Only)Programming cable, USB A to USBmicroB, 6ft (1.83 m) length. For use withCLICK PLUS PLCs and most USB devices.The USB port supplies 5VDC to the CLICKPLUS CPU for programming.Replacement terminalblock for the 8-pointI/O modules. Sold inpacks of 2.C0-8TB-1 18.00Spare 13-Point I/O Terminal BlockReplacement terminal block for the 8-pointI/O relay modules. Sold in packs of 2.C0-PGMSW 11.50Programming Software CD-ROMThe programming software can bedownloaded free at the AutomationDirectWeb site, or the CD can be purchasedfrom the AutomationDirect online Webstore. www.AutomationDirect.comD2-DSCBL 33.50Programming Cable for CLICK/CLICKPLUS and DirectLOGIC PLCs12ft. (3.66 m) RS232 shielded PCprogramming cable for CLICK, selectCLICK PLUS PLCs, DL05, DL06, DL105,DL205, D3-350, D4-450, D4-454, andDo-more H2 and T1H series CPUs. 9-pinD-shell female connector to an RJ12 6P6Cconnector.C0-16TB 21.50Spare 16-Point I/OTerminal BlockReplacement terminalblock for the 16-point I/Omodules and PLC built-inI/O. Sold in packs of 2.C2-6TB 16.00Spare 6-pt Terminal BlockNote: If your PC has a USB port but does not have a serial port,you must use programming cable EA-MG-PGM-CBL to connectto CLICK PLCs. For CLICK PLUS PLCs, you may also nt terminalblock for the C2-DCMserial ports.Sold in packs of 2.CLICK PLCstCLP-158
For the latest prices, please check NT250 44.00Wi-Fi/Bluetooth Dome AntennaC2-FILL 8.25CPU Option Slot Cover2.4 GHz antenna, IP67, panel mount,9.8 ft (3m) cable length, for externalmounting when CLICK PLUS PLC isinstalled in a metallic enclosure.Snap-on coverfor CLICK PLUSCPU Option Slotin applicationswithout anOption Slotmodule present.SE-ANT210 9.25Wi-Fi/Bluetooth Whip AntennaD2-BAT-1 6.25Replacement CR2354 battery forStandard, Analog, Ethernet Standard andEthernet Analog PLC units.TW-SD-MSL-2 3.50Insulated Slotted Screwdriver0.4 x 2.5 x 80 mm slotted screwdriver forterminal blocks.DN-EB35MN 26.50DINnector End BracketD0-MC-BAT 3.00Replacement CR2032 battery forCLICK PLUS PLC units.DN-WSWire StripperC-more and C-more MicroGraphic Operator InterfacesZIPLink Wiring SystemsWhip/straight 2.4GHz antenna, IP65,connector mount.Not recommendedfor installation in ametallic enclosure.www.automationdirect.comMSD-SLC16G 96.0016GB microSD card, industrial grade,3D NAND Flash (with SLC Mode),85 C [185 F] max operating temp. 61.00CLICK PLCstCLP-159
Operating Voltage Range 24VDC, Class 2 or SELV (Safety Extra-Low Voltage) or Limited Energy Circuit power supply Input Voltage Range 20.0-28.0 VDC Maximum Inrush Current 30A @ 1ms Power Consumption 20W 22W 20W 22W 20W 22W Acceptable External Power Drop Max 10ms (AC power failure with C0-00AC or C0-01AC) Current Required 110mA 120mA 105mA .
