Transcription
CATALOG C-PEX-0715AHEAD OF THE FLOW NIBCO PEXPiping Systems
Business-to-Business SolutionsLook to NIBCO for technology leadership.The velocity with which e-business evolvesdemands that new products and services be continuously developed andintroduced to keep our customers atthe center of our business efforts.NIBCO provides an entire suite ofbusiness-to-business solutions that ischanging the way we interact with customers.NIBCOpartner.comsm is an exclusive set of secure web applications that allow quick access tocustomer-specific information and online order processing. This self-service approach gives you24/7 access to your order status putting you in total control of your business.Real time information includes: Online order entry Viewable invoices & reports Inventory availability Current price checks Order status Online library of price sheets, catalogs & submittalsElectronic Data Interchange (EDI) makes it possible to trade business documents at the speed oflight. This technology cuts the cost of each transaction by eliminating the manual labor and paperwork involved in traditional order taking. This amounts to cost-savings, increased accuracy andbetter use of resources.With EDI, you can trade: Purchase orders PO Acknowledgements Invoices Product activity data Advanced ship notices Remittance adviceVendor Managed Inventory (VMI), a sophisticated service for automated inventory management,reduces your overhead by transferring inventory management, order entry and forecasting toNIBCO. This is an on-going, interactive partnership with NIBCO.Through automation, VMI brings results: Improves customer service Optimum inventory efficiencies Better forecasting Cuts transaction costs Peace of mind Relief from day-to-day managementNIBCO INC. WORLD HEADQUARTERS 1516 MIDDLEBURY ST. ELKHART, IN 46516-4740 USA PH: 1.800.234.0227TECH SERVICES PH:1.888.446.4226 FAX: 1.888.336.4226 INTERNATIONAL OFFICE PH: 1.574.295.3327 FAX: 1.574.295.3455www.nibco.com
www.nibco.comAHEADOFTHEF L O W Visit our website for the most current information.Table Of ContentsIntroduction.4Material Selection.6NIBCO PEX Tube.10NIBCO PEX Metal Insert Fittings.16NIBCO PEX Plastic Insert Fittings.21NIBCO PEX Push 'N Go Fittings.23NIBCO PEX Connections.25NIBCO PEX Manifolds.26NIBCO PEX Valves.30NIBCO PEX Radiant .31NIBCO PEX Tools.34NIBCO PEX Installation Accessories.37Warranty.38NIBCO INC. WORLD HEADQUARTERS 1516 MIDDLEBURY ST. ELKHART, IN 46516-4740 USA PH: 1.800.234.0227TECH SERVICES PH: 1.888.446.4226 FAX: 1.888.234.0557 INTERNATIONAL OFFICE PH: 1.574.295.3327 FAX: 1.574.295.3455www.nibco.com3
www.nibco.comNIBCO PEX is a Complete SystemNIBCO PEX tubing, fittings, valves, and manifolds are designed to be used as a complete system. Therefore, NIBCO cannot guaranteethat tubing and/or components from other systems are compatible for use with the NIBCO PEX system. NIBCO offers more versatilitywith the choice of three different connections - crimp, clamp or sleeve.The NIBCO PEX Manufacturing ProcessCross-linking is the process that gives NIBCO PEX tubing its superior characteristics. The long, simple chains in a polyethylenemolecule are altered to form a more stable, three-dimensional network. This process changes the material from a thermoplastic intoa thermoset. A thermoset differs from a thermoplastic because a thermoset cannot be melted and then reformed. This change inmolecular structure creates a polyethylene product with enhanced mechanical properties. Many manufacturers use a chemical additiveto activate the cross-linking process, but NIBCO employs a sterile, electron beam process that provides superior properties. Thisprocess, which is called PEX-c, delivers the highest quality PEX tubing available today, while reducing the use of chemicals.Standards and ApprovalsNIBCO PEX is an outside diameter controlled tubing of one standard dimension ratio (SDR 9) that is manufactured to comply with therequirements of CSA B137.5, ASTM F 876, and ASTM F 2023. NIBCO PEX insert fittings and copper crimp rings are manufactured tocomply with CSA B137.5 and ASTM F 1807. NIBCO PEX tubing, fittings, and crimp rings are tested as a system to the requirements ofASTM F 877. NIBCO PEX tubing components are listed for compliance to NSF/ANSI 14 and NSF/ANSI 61 by NSF Internationalfor use in potable water systems. NIBCO PEX tubing has also been tested and certified by the International Association ofPlumbing and Mechanical Officials (IAPMO).Operating LimitsWater: 160 PSI @ 73 F (1.10 MPa @ 23 C)100 PSI @ 180 F (0.69 MPa @ 82 C)80 PSI @ 200 F (0.55 MPa @ 93 C)Chlorinated Water: 80 PSI @ 140 F (0.55 MPa @ 60 C)The water temperature must be 140 F (60 C) or lower and the water pressure must be 80 PSI (0.55 MPa) or lowerThermal ExpansionHeated water expands and must be accommodated within the plumbing system. Protection against increased water pressure from thermalexpansion utilizing a pressure relief valve and expansion tank to keep pressure under the maximum of 80 PSI (0.55 MPa) must be incorporated in thesystem.Visit our website for the most current information.4NIBCO INC. WORLD HEADQUARTERS 1516 MIDDLEBURY ST. ELKHART, IN 46516-4740 USA PH: 1.800.234.0227TECH SERVICES PH: 1.888.446.4226 FAX: 1.888.234.0557 INTERNATIONAL OFFICE PH: 1.574.295.3327 FAX: 1.574.295.3455www.nibco.com
www.nibco.comAHEADOFTHEF L O W Look to NIBCO for Leadership on PEX Tubing SystemsNIBCO is proud to offer PEX for potable water distribution and radiant heating. With over 100 years of experience, you can trust NIBCOto provide the highest quality PEX products.NIBCO PEX tubing is processed though an electron beam in order to enhance the mechanical properties over conventionalpolyethylene. Available in a range from 1/4” to 1-1/4” copper tube size, NIBCO sets a new standard in PEX plumbing products.NIBCO PEX Pipe Offers Significant Advantages: NIBCO PEX is pliable and can be easily straightened after removal from the coil. NIBCO PEX has greater dimensional stability. The outside diameter dimensions ofour tubes are held to strict tolerances. This means a better fit for you with no sliding of copper crimp ringson the tube. NIBCO PEX is chlorine-resistant. NIBCO PEX is non-toxic and employs no toxic chemicals in the manufacturing process, unlike other PEXmanufacturing methods. NIBCO PEX will not leach taste or odor and keeps water clear and clean. NIBCO PEX requires fewer fittings than a traditional rigid plumbing system and is easier to install. NIBCO PEX is abrasion resistant. NIBCO PEX offers three different connection methods - crimp, clamp and sleeve.Installation NotesUse of recirculating loops with hot water distribution is gaining popularity in some areas of the country. However, there is debate aboutthe efficiency of these systems due to the constant heating of hot water including during periods of low demand. Data published inthe PPI/PPFA/NAHB PEX Design Guide shows a properly designed Home Run manifold system can reduce time to deliver hot water andwater use 30 – 40% without recirculation.If recirculating loops are used with NIBCO PEX, the use of a timer is recommended and the following conditions must be observed:Max PressureMax Recirculation Time80 psi @ 140 F12 hrs/dayPlease note many building codes forbid constant recirculation and require the use of a timer or other device to make water heatingperiodic in nature.Visit our website for the most current information.NIBCO INC. WORLD HEADQUARTERS 1516 MIDDLEBURY ST. ELKHART, IN 46516-4740 USA PH: 1.800.234.0227TECH SERVICES PH: 1.888.446.4226 FAX: 1.888.234.0557 INTERNATIONAL OFFICE PH: 1.574.295.3327 FAX: 1.574.295.3455www.nibco.com5
www.nibco.comMaterial SelectionPlastic Piping StandardsMany commercial, industrial, and governmental standards or specifications are available to assist the design engineer in specifyingplastic piping systems. Standards most frequently specified in plastic piping systems are American Society for Testing and Materials(ASTM) Standards. Below is a list and description of those standards most typically applied to industrial plastic piping.Polyphenylsulfone (PPSU)Polyethylene (PE)Polyethylene is the most common olefin material and is typicallyused in transporting water. Because olefins cannot be joinedwith cements, barbed insert fittings are used for mechanicalassembly. PE is light weight, low cost, has excellent chemicalresistance, low coefficient of friction, and is non-toxic.Cross-Linked Polyethylene (PEX)PEX is the common name for cross-linked polyethylene. PEXtubing is predominantly used in water distribution systems,hydronic radiant heating systems, and natural gas systems.Almost all PEX is made from high density polyethylene (HDPE).PEX contains cross-linked bonds that are introduced into thepolymer structure, changing the thermoplastic into a thermoset.Cross-linking is accomplished during or after the extrusion of thetubing. The required degree of cross-linking, according to ASTMF 876, is between 65 to 89 percent.The cross-linking process improves high-temperature mechanical properties, low-temperature impact, tensile strength, resistance to brittle fracture, and scratch resistance properties.Cross-linking may be done by the peroxide (Engel) method, silane(moisture cure) method, or electron beam method. NIBCO PEXis produced by the electron beam method. This is the cleanestand most environmentally friendly of the three methods. Alsothis method does not involve other chemicals and uses onlyhigh-energy electrons to split the carbon-hydrogen bonds andfacilitate cross-linking.Polyphenylsulfone is a thermoplastic that is tough, rigid, highstrength, and retains its properties between -148 F and 302 F(-100 C and 150 C). PPSU has very high dimensional stability;the size change when exposed to boiling water or 302 F (150 C)air generally falls below 0.1 percent. Polyphenylsulfone is highlyresistant to mineral acids, alkali, and electrolytes, in pH rangingfrom 2 to 13. PPSU is resistant to oxidizing agents; therefore,can be cleaned by bleaches. Also, PPSU is resistant to surfactants and hydrocarbon oils. However, PPSU is not resistant tolow-polar organic solvents (e.g., ketones and chlorinated hydrocarbons) and aromatic hydrocarbons. In addition, PPSU is oftenchosen for difficult applications including high water temperatures, chlorides, or when water quality may increase the risk ofdezincification, a type of corrosion that can adversely affectmetal fittings.BrassBrass is the term used for copper alloys where zinc is the principle alloying element along with copper. Brass has a yellowcolor, somewhat similar to gold. Brass plumbing componentsmay be machined from extruded shapes, forged, or cast. Thisalloy is mainly used for decorative fixtures, plumbing components, and electrical applications. Today, almost 90% of allbrass alloys are recycled.Copper (Cu)Copper (Cu) is a natural element that has historically been thedominant material used in plumbing, heating, cooling, and otherpiping applications. Copper is a ductile metal with excellentthermal conductivity and is corrosion resistant. The materialsused in copper piping products comply with the requirements ofspecifications established by the American Society for Testingand Materials (ASTM). The alloy customarily used for coppertube and copper fittings is designated as C12200 (Copper No.122). This alloy contains a minimum of 99.9% pure copper andis deoxidized by the addition of phosphorus. Other copper alloysmay be used.Visit our website for the most current information.6NIBCO INC. WORLD HEADQUARTERS 1516 MIDDLEBURY ST. ELKHART, IN 46516-4740 USA PH: 1.800.234.0227TECH SERVICES PH: 1.888.446.4226 FAX: 1.888.234.0557 INTERNATIONAL OFFICE PH: 1.574.295.3327 FAX: 1.574.295.3455www.nibco.com
www.nibco.comAHEADOFTHEF L O W Material SelectionPlastic Piping StandardsNSF/ANSI 61Drinking Water System Components - Health Effects. This is theAmerican National Standard for health effects of drinking watersystem components. This standard establishes the health effectsrequirements for the chemical contaminants and impurities that areindirectly imparted to drinking water from products, componentsand materials used in drinking water systems. This Standard ismaintained by a Joint Committee with equal representation fromregulators (such as; EPA, Health Canada, and state drinking waterofficials), users (such as; water purveyors, utilities, and engineers)and manufacturers. NSF/ANSI Standard 61 is approved by theAmerican National Standards Institute, which ensures the standardis developed and maintained using an open consensus process andhas representation by all stakeholders.NSF/ANSI 14Plastics Piping System Components and Related Materials.NSF/ANSI Standard 14 establishes minimum physical, performance, health effects, quality assurance, marking, and recordkeeping requirements for plastic piping components and relatedmaterials such as: Thermoplastic Materials, Thermoset Materials,Non-plastic Components, Piping and Tubing, Fittings and Valves,Appurtenances, Joining Materials, and Gaskets, Ingredientsof Materials and Special Engineered Products and Materials.Standard 14 outlines production facility inspection, quality control,short-term performance testing, long-term performance evaluation, and chemical extraction testing of the products to ensurecontinued compliance. The NSF Mark for these certified productsinclude such things as the manufacturer name or trademark; thecertification agency/laboratory name or trademark; the referenceperformance standard (such as ASTM F 876 and F 877); productend use (pw or rfh), material type designation such as PEX orPEX/AL/PEX; product size, date of production and manufactureridentification code for tubing. For products with size constraintsthat do not accommodate complete marking, the manufacturermust include all such details on the product packaging.ASTM Standard F 876Standard Specification for Cross-linked Polyethylene (PEX) Tubing.This Standard contains finite dimensional requirements for tubing in addition to burst, sustained pressure, and other relevantperformance tests at different water temperatures. Other tubingproducts that are partially comprised of a PEX material are knownas composites. These products usually have a PEX or PE outer layerbound to aluminum or an aluminum alloy, and an inner layer ofPEX. The aluminum layer in the core of composite tubing involvesadditional installation and handling considerations. There arecurrently two ASTM standards that address performance requirements for such products: ASTM F 1281 and ASTM F 1335.ASTM Standard F 877Standard Specification for Cross-linked Polyethylene (PEX)Plastic Hot- and Cold-Water Distribution Systems. This Standardcontains performance requirements for PEX tubing and fittingssystems. Also, this Standard contains test methods and methods of marking for components used in PEX hot- and cold-waterdistribution systems intended for 100 psi (0.69 MPa) water serviceup to and including 180 F (82 C).ASTM Standard F 1807Standard Specification for Metal Insert Fittings Utilizing a CopperCrimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing.This Standard contains material and dimensional requirementsfor the insert fittings and crimp rings used with PEX tubing. Theperformance requirements for these products are defined withinASTM F 877.ASTM Standard F 2098Specification for Stainless Steel Clamps for Securing SDR9 CrossLinked Polyethylene (PEX) Tubing to Metal Insert Fittings. Thisstandard covers stainless steel clamps for use with insert fittingsthat comply with ASTM F 1807, and cross-linked polyethylene(PEX) tubing that complies with ASTM F 876. These clamps areintended as an alternative to the copper-alloy crimp-rings definedin ASTM F 1807 or ASTM F 2159 and for use in 100 psi (689.5 kPa)hot- and cold-water distribution systems operating at temperatures up to and including 180 F (82 C). This Standard includesrequirements for materials, workmanship, dimensions, and marking of the stainless steel clamps. Also, these clamps are coveredby international patents held by Oetiker International.ASTM Standard F 2159Specification for Plastic Insert Fittings Utilizing a Copper CrimpRing for SDR9 Cross-linked Polyethylene (PEX) Tubing. ThisStandard covers Polyphenylsulfone insert fittings and coppercrimp rings for use with cross-linked polyethylene (PEX) tubing.These fittings are intended for use in 100 psi (689.5 kPa) hot- andcold-water distribution systems operating at temperatures up toand including 180 F (82 C). This Standard includes requirementsfor material, molded part properties, performance, workmanship,dimensions, and markings for the fittings and rings.Visit our website for the most current information.NIBCO INC. WORLD HEADQUARTERS 1516 MIDDLEBURY ST. ELKHART, IN 46516-4740 USA PH: 1.800.234.0227TECH SERVICES PH: 1.888.446.4226 FAX: 1.888.234.0557 INTERNATIONAL OFFICE PH: 1.574.295.3327 FAX: 1.574.295.3455www.nibco.com7
www.nibco.comMaterial SelectionPlastic Piping StandardsASSE Standard 1061Removable and Non-Removable Push-Fit Fittings. This Standardcovers removable and non-removable push-fit fittings that employa quick assembly push-fit connector, as well as push-fit connectorsintegrated into plumbing devices. This Standard applies to fittings that may be approved for use with PEX tubing that conformsto ASTM F 876, Type K, L, and M seamless copper tubing thatconforms to ASTM B 88, and CPVC tubing that conforms to ASTMD 2846. The standard includes minimum requirements for materials, performance for the fitting joints, marking, and identificationrequirements. When this type of fitting connection is used withPEX tubing, a tube liner must be inserted into the end of the tubingbefore assembly.NSF-pwKentuckyMetal insert fittings utilizing a copper crimp ring for cross-linkedpolyethylene (PEX) tubing must be produced and labeled as ASTMF 1807. Stainless steel clamps substituted for the copper crimpring must be produced and labeled as ASTM F 2098. Methodsof joining other than mentioned above shall be prohibited unlessdocumentation is provided, from the systems manufacturer, honoring full warranty of the system installed. Fittings which have asmaller ID (inside diameter) other than what is required for theinsert portion of the fitting shall not be permitted. A system consisting of material from multiple manufacturers (i.e. fittings, tubingand crimp rings) shall be prohibited unless documentation frommanufacturers is produced providing full warranty. Connectionsfor PEX systems other than those in section 1 of this regulationwill be prohibited.Identification mark for products that meet all applicable performance standards for pressure-rated potable water applicationsas required by NSF/ANSI Standard 14 and that comply with NSF/ANSI Standard 61 for health effects.NSF-rfhIdentification mark for products that meet all applicable performance standards for a pressure-rated in-floor heating applicationas required by NSF/ANSI Standard 14. No heath effects evaluationis required.NSF-61Identification mark for products that meet the applicable requirements of NSF/ANSI 61.California Proposition 65In November 1986, California voters approved a ballot initiative toaddress concerns about exposures to toxic chemicals. That initiative became The Safe Drinking Water and Toxic Enforcement Actof 1986, better known by its original name, Proposition 65. ThisProposition requires the Governor of California to publish a list ofchemicals that are known to the State of California to cause cancer, birth defects or other reproductive harm. Over 750 chemicalsand materials, including many metals and plastics, have been listed as of December 12, 2006. Second, Manufacturers are requiredto provide a "clear and reasonable" warning before exposinganyone to a listed chemical. This warning can be give by a varietyof means, such as by labeling a consumer product, by postingsigns at the workplace, or by publishing notices in a newspaper. AProposition 65 warning means that the Manufacturer issuing thewarning believes that one or more listed chemicals is present in itsproduct, even if it is only present in trace quantities.Visit our website for the most current information.8NIBCO INC. WORLD HEADQUARTERS 1516 MIDDLEBURY ST. ELKHART, IN 46516-4740 USA PH: 1.800.234.0227TECH SERVICES PH: 1.888.446.4226 FAX: 1.888.234.0557 INTERNATIONAL OFFICE PH: 1.574.295.3327 FAX: 1.574.295.3455www.nibco.com
www.nibco.comAHEADOFTHEF L O W Fitting Terms and AbbreviationsFIP Female Iron PipeMIP Male Iron PipeNPSM Straight Pipe ThreadCTS Copper Tube SizeSVL SwivelPB PolybutyleneTube MarkingsNIBCO PEXManufacturer andBrandPEX 3308(CTS OD)Tubing SizeTubingMaterialDesignationCodeCTS SDR-9ASTM F876 F877 F1807 F215980 psi @ 200 F100 psi@180 F160 psi @ 73 FCSA B137.5(date code)(production code)Potable WaterCertificationsStandard DimensionRatio(length) MADE IN USAMfg. LotCodeASTM SpecificationsPressure RatingMfg. DateCodeFootageMarkingVisit our website for the most current information.NIBCO INC. WORLD HEADQUARTERS 1516 MIDDLEBURY ST. ELKHART, IN 46516-4740 USA PH: 1.800.234.0227TECH SERVICES PH: 1.888.446.4226 FAX: 1.888.234.0557 INTERNATIONAL OFFICE PH: 1.574.295.3327 FAX: 1.574.295.3455www.nibco.com9
www.nibco.comNIBCO PEX TubePotable WaterREDNP60PEX Red ERIALSIZENO.PX60012R*1/2" x 5'PX60013R*1/2" x 10'PX600141/2" x 20'PX60019R*3/4" x 5'PX60020R*3/4" x 10'PX600213/4" x 20'PX60026R*1" x 10'PX600271" x BUNDLE5050505025251515All sticks sold in 5 bundle minimum quantity. Sizes and colors can be mixed to make up the 5 bundle minimum.NP60PEX Red P60NP60MATERIALSIZENO.PX400141/2" x 100'PX400181/2" x 250'PX40019*1/2" x 300'PX400201/2" x 500'PX400221/2" x 1000'PX400303/4" x 100'PX40035*3/4" x 300'PX400383/4" x 500'PX40042*1" x 100'PX40048*1" x 300'PX40051*1" x 's are assemble-to-order or made-to-order, and may require longer lead times. Contact customer service or your account representative for details.Visit our website for the most current information.10NIBCO INC. WORLD HEADQUARTERS 1516 MIDDLEBURY ST. ELKHART, IN 46516-4740 USA PH: 1.800.234.0227TECH SERVICES PH: 1.888.446.4226 FAX: 1.888.234.0557 INTERNATIONAL OFFICE PH: 1.574.295.3327 FAX: T201010851375833
www.nibco.comAHEADOFTHEF L O W NIBCO PEX TubePotable WaterWHITENP80PEX White OOTSTICKBUNDLENP80PX60201*1/4" x 5'0.03000.15250NP80PX60202*1/4" x 10'0.03000.30500NP80PX60203*1/4" x 20'0.03000.601,000NP80PX60206*3/8" x 5'0.04100.21250NP80PX60207*3/8" x 10'0.04100.41500NP80PX60208*3/8" x 20'0.04100.821,000NP80PX602121/2" x 5'0.05400.27250NP80PX60213*1/2" x 10'0.05400.54500NP80PX602141/2" x 20'0.05401.081,000NP80PX60219*3/4" x 5'0.10250.51125NP80PX60220*3/4" x 10'0.10251.03250NP80PX602213/4" x 20'0.10252.05500NP80PX60226R*1" x 10'0.16701.67150NP80PX602271" x 20'0.16703.34300NP80PX602311-1/4" x 20'0.25305.06200All sticks sold in 5 bundle minimum quantity. Sizes and colors can be mixed to make up the 5 bundle 51510PEX White 0NP80MATERIALSIZENO.PX60204*1/4" x 25'PX402011/4" x 100'PX40203*1/4" x 500'PX40204*1/4" x 1000'PX60210*3/8" x 50'PX402053/8" x 100'PX40210*3/8" x 500'PX40212*3/8" x 1000'PX60217*1/2" x 50'PX402141/2" x 100'PX40219*1/2" x 300'PX402201/2" x 500'PX402221/2" x 1000'PX402303/4" x 100'PX40235*3/4" x 300'PX402383/4" x 500'PX402421" x 100'PX40245*1" x 200'PX40246*1" x 250'PX402481" x 300'PX40251*1" x 500'PX402541-1/4" x 100'PX402551-1/4" x /PALLET1004015550351063020108513758545284*SKU's are assemble-to-order or made-to-order, and may require longer lead times. Contact customer service or your account representative for details.Visit our website for the most current information.NIBCO INC. WORLD HEADQUARTERS 1516 MIDDLEBURY ST. ELKHART, IN 46516-4740 USA PH: 1.800.234.0227TECH SERVICES PH: 1.888.446.4226 FAX: 1.888.234.0557 INTERNATIONAL OFFICE PH: 1.574.295.3327 FAX: 1.574.295.3455www.nibco.com11
www.nibco.comNIBCO PEX TubePotable WaterBLUENP70PEX Blue 0MATERIALSIZENO.PX60112R*1/2" x 5'PX60113R*1/2" x 10'PX601141/2" x 20'PX60119R*3/4" x 5'PX60120R*3/4" x 10'PX601213/4" x 20'PX60125R*1" x 5'PX60117R*1" x 10'PX601271" x 50300PIECES/BUNDLE505050252525151515All sticks sold in 5 bundle minimum quantity. Sizes and colors can be mixed to make up the 5 bundle minimum.NP70PEX Blue P70NP70NP70NP70NP70MATERIALSIZENO.PX60115*1/2" x 25'PX401141/2" x 100'PX401181/2" x 250'PX40119*1/2" x 300'PX401201/2" x 500'PX401221/2" x 1000'PX60122*3/4" x 25'PX60124*3/4" x 50'PX401303/4" x 100'PX40135*3/4" x 300'PX401383/4" x 500'PX401421" x 100'PX401481" x 300'PX40151*1" x 530.7551.2516.7050.1083.50*SKU's are assemble-to-order or made-to-order, and may require longer lead times. Contact customer service or your account representative for details.Visit our website for the most current information.12NIBCO INC. WORLD HEADQUARTERS 1516 MIDDLEBURY ST. ELKHART, IN 46516-4740 USA PH: 1.800.234.0227TECH SERVICES PH: 1.888.446.4226 FAX: 1.888.234.0557 INTERNATIONAL OFFICE PH: 1.574.295.3327 FAX: ,000COILS/PALLET502010108540251375832
www.nibco.comAHEADOFTHEF L O W NIBCO PEX TubePotable WaterTERRA COTTANP65PEX Terra Cotta OOTSTICKBUNDLENP65PX605063/8" x 5'0.04100.21250NP65PX60512R1/2" x 5'0.05400.27250NP65PX60513R1/2" x 10'0.05400.54500NP65PX605141/2" x 20'0.05401.081,000NP65PX60519R3/4" x 5'0.10250.51125NP65PX60520R3/4" x 10'0.10251.03250NP65PX605213/4" x 20'0.10252.05500NP65PX60525*1" x 5'0.16700.8475NP65PX605261" x 10'0.16701.67150NP65PX605271" x 20'0.16703.34300All sticks sold in 5 bundle minimum quantity. Sizes and colors can be mixed to make up the 5 bundle minimum.NP65PIECES/BUNDLE50505050252525151515PEX Terra Cotta PX605093/8" x 25'PX40508*3/8" x 300'PX40510*3/8" x 500'PX605151/2" x 25'PX405141/2" x 100'PX405181/2" x 250'PX40519*1/2" x 300'PX405201/2" x 500'PX605223/4" x 25'PX405303/4" x 100'PX40531*3/4" x 150'PX40532*3/4" x 200'PX405343/4" x 250'PX60528*1" x 25'PX60530*1" x 50'PX40542*1" x 100'PX405441" x 150'PX405481" x 63*SKU's are assemble-to-order or made-to-order, and may require longer lead times. Contact customer
NIBCO PEX Installation Accessories . Plumbing and Mechanical Officials (IAPMO). Operating Limits Water: 160 PSI @ 73 F (1.10 MPa @ 23 C) 100 PSI @ 180 F (0.69 MPa @ 82 C) 80 PSI @ 200 F (0.55 MPa @ 93 C) Chlorinated Water: 80 PSI @ 140 F (0.55 MPa @ 60 C) The water temperature must be 140 F (60 C) or lower and the water pressure must be 80 PSI (0.55 MPa) or lower .
