Transcription
GEAutomation & ControlsProgrammable Control ProductsQuickPanel Operator Interface User Manual GFKQuickPanel 2847XOperator InterfaceUser ManualGFK-2847XJune S12CDxIC755CxS15CDxFor Public Disclosure(6” Display)(7” Display)(10" Display)(12” Display)(15” Display)
Legal InformationWarnings, Cautions, and Notes as Used in this PublicationGFL-002Warning notices are used in this publication to emphasize that hazardous voltages,currents, temperatures, or other conditions that could cause personal injury exist inthis equipment or may be associated with its use.In situations where inattention could cause either personal injury or damage toequipment, a Warning notice is used.WarningCaution notices are used where equipment might be damaged if care is not taken.CautionIndicates a procedure or condition that should be strictly followed.AttentionNote:Notes merely call attention to information that is especially significant to understandingand operating the equipment.These instructions do not purport to cover all details or variations in equipment, nor to provide for everypossible contingency to be met during installation, operation, and maintenance. The information is supplied forinformational purposes only, and GE makes no warranty as to the accuracy of the information included herein.Changes, modifications, and/or improvements to equipment and specifications are made periodically andthese changes may or may not be reflected herein. It is understood that GE may make changes, modifications,or improvements to the equipment referenced herein or to the document itself at any time. This document isintended for trained personnel familiar with the GE products referenced herein.GE may have patents or pending patent applications covering subject matter in this document. The furnishingof this document does not provide any license whatsoever to any of these patents.GE PROVIDES THE FOLLOWING DOCUMENT AND THE INFORMATION INCLUDED THEREIN AS-IS ANDWITHOUT WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIEDSTATUTORY WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE.* indicates a trademark of General Electric Company and/or its subsidiaries.All other trademarks are the property of their respective owners. Copyright 2013-2018 General Electric Company.All Rights Reserved
Contact InformationIf you purchased this product through an Authorized Channel Partner, please contact the seller directly.General Contact InformationOnline technical support and GlobalCarewww.geautomation.com/supportAdditional informationwww.geautomation.comSolution Providersolutionprovider.ip@ge.comTechnical SupportIf you have technical problems that cannot be resolved with the information in this manual, please contact usby telephone or email, or on the web at -2682International Americas Direct Dial1-780-420-2010Customer Care Emaildigitalsupport@ge.comPrimary language of supportEnglish(if toll free 800-option is unavailable)Europe, the Middle East, and AfricaPhone 800-1-433-2682EMEA Direct Dial 420-296-183-331Customer Care Emaildigitalsupport.emea@ge.comPrimary languages of supportEnglish, French, German, Italian, Spanish(if toll free 800-option is unavailable orif dialing from a mobile telephone)Asia PacificPhone 86-21-3877-7006 (India, Indonesia, and Pakistan) 86-400-820-8208 (rest of Asia)Customer Care Emaildigitalsupport.apac@ge.comPrimary languages of supportChinese, English
Table of ContentsQuickPanel Operator Interface User Manual GFK-2847XTable of Contents . iTable of Figures . vChapter 11.1Overview . 1Specifications . 2Physical Specifications and Mounting Options . 2Environmental Specifications . 71.2Glossary . 81.3Revisions in this Manual . 91.4PACSystems Documentation. 10Chapter 2Hardware . 112.1Physical Characteristics . 122.2LED Indicators . 17Operation Status LEDs. 17Ethernet Port Operation LEDs . 17Chapter 3Software. 193.1Operating System . 193.2Backup Utility . 193.3Storage Manager . 193.4Copy Project to SD Card . 203.5Proficy Machine Edition Project Update . 203.6FTP Server . 21Remote User Authentication . 21FTP with Removable Flash Devices . 213.7HTTP Server . 223.8SNTP Server . 223.9QuickPanel OS Utilities Settings Tool . 23Firmware Upgrade . 24Bypass Startup Programs . 26Reset Enhanced Security . 28GFK-2847XJune 2018i
ContentsEnable or Disable SNMP Agent . 293.10Display Screen Sensitivity Tool. 313.11Launch Application . 323.12VNC Server . 333.13Battery Life Prediction . 343.14Simple Network Management Protocol (SNMP) . 38Configure Trap Destinations . 42Enable or Disable SNMP Agent . 42Export MIB to SD Card . 43Load MIB into SNMP Manager . 44Data Types Mapping between PME Project and SNMP . 45Establish SNMP Communication . 463.15Chapter 4ScreenSaver . 47Pre-installation Checks . 494.1Unpacking and Inspection . 504.2Basic Set-up. 524.3Initial Start-up . 53Connecting Input Power . 53Initial Configuration. 544.4Runtime Set-up . 554.5Firmware Updates . 554.6Shutdown . 55Chapter 5Mounting and Installation . 565.1Protective Sheet Installation . 565.2Mounting Location . 565.3Panel Mounting. 575.4Mounting and Installation Procedure . 595.5VESA Arm Mounting . 625.6Battery Installation and Replacement . 63IC755CxS06RDx . 64IC755CxW07CDx . 66IC755CxSxxCDx . 685.7Connectors . 70Power Connector Pin-Out for IC755CxS06RDx, IC755CxW07CDx, and IC755CxSxxCDx . 70iiQuickPanel Operator InterfaceGFK-2847X
ContentsEthernet for IC755CxS06RDx, IC755CxW07CDx, and IC755CxSxxCDx . 71Serial Port Details . 72Universal Serial Bus (USB) Ports . 78Audio (LINE OUT) Details for IC755CxS06RDx, IC755CxW07CDx, and IC755CxSxxCDx. 80Audio (MIC IN) Details (Applicable only to IC755CxS06RDx and IC755CxW07CDx) . 80SD Card Slot and Storage . 81Chapter 66.1Operation . 83Touchscreen Display . 83Display Brightness Adjustment . 84Display Backlight Configuration . 84Touchscreen Recalibration . 856.2Keyboard Configuration . 86External Keyboard (Optional) . 86Soft Input Panel . 866.3Mouse . 866.4Printing . 876.5Memory. 88DRAM Memory . 88Memory Allocation Modification . 88Chapter 7Secomea Security (Optional) . 897.1Secomea Configuration Tool . 897.2Secomea Products . 90Chapter 8Save and Restore Settings . 938.1Menu Item Location . 938.2Import Registry Data from XML File . 968.3Save the Settings to a File . 978.4Restore the Settings from a (.qps) File . 98GFK-2847XJune 2018iii
ContentsAppendix A Product Certifications and Installation Guidelines . 101A-1Agency Approvals . 101A-2Conditions of Safe Use for Installation in Hazardous Locations . 102A-3EMC Installation and Operation Considerations . 106A-4Government Regulations . 107Appendix B Orderable Part Numbers . 109Appendix C Serial Port Details IC755CxS10CDx, IC755CxS12CDA, and IC755CxS15CDx . 111ivQuickPanel Operator InterfaceGFK-2847X
ContentsTable of FiguresFigure 1: QuickPanel Operator Interface Display . 1Figure 2: 4-Sided View of IC755CxS06RDx . 12Figure 3: Rear View & Dimensions IC755CxS06RDx . 12Figure 4: 4-Sided View IC755CxW07CDx . 13Figure 5: Rear View IC755CxW07CDx . 13Figure 6: 4-Sided View IC755CxS10CDx . 14Figure 7: Rear View IC755CxS10CDx . 14Figure 8: 4-Sided View IC755CxS12CDx . 15Figure 9: Rear View IC755CxS12CDx . 15Figure 10: 4-Sided View IC755CxS15CDx . 16Figure 11: Rear View IC755CxS15CDx . 16Figure 12: Firmware Upgrade Sequence . 24Figure 13: Firmware Upgrade Sequence for Specific Firmware Builds . 25Figure 14: QuickPanel 7” Display Reboot and Run Program Message . 25Figure 15: Activate Checkbox for Use DIP Switch . 26Figure 16: Enable Bypass Sequence . 26Figure 17: Start-Up Window following Enable . 27Figure 18: Start-Up Window following Disable . 27Figure 19: Sequence to Disable Reset Enhanced Security . 28Figure 20: Sequence to Enable SNMP . 29Figure 21: Acknowledge SNMP Security Risk Notice. 29Figure 22: Sequence to Disable SNMP . 30Figure 23: Select Screen Sensitivity Level . 31Figure 24: Launch Application from Start Menu . 32Figure 25: Select or Browse to Specific Application . 32Figure 26: Select QP VNC Server Application . 33Figure 27: Battery Life Prediction Example . 34Figure 28: Current Time Not Set Message . 34Figure 29: Example of Battery Life Prediction Displayed After Current Time Set . 35Figure 30: Battery Status Options . 35Figure 31: Battery is Not Present Message . 35Figure 32: Calendar Entry of Date for Battery was Replaced Option . 36Figure 33: Enter Current Date Option . 36Figure 34: Close and Reopen Message . 37Figure 35: Battery Life Prediction Example after Battery Replacement . 37Figure 36: QuickPanel Operating as SNMP Agent . 38Figure 37: MIB Tree Structure. 39Figure 38: Alarm Trap Notification Display . 40Figure 39: List of HMI Tags Available to Query . 41Figure 40: Specify IP Address(es) as Trap Destination(s) . 42Figure 41: Copy MIB to SD Card . 43Figure 42: Success/Failure Annunciation . 43Figure 43: Loading MIBs in 3rd Party SNMP Manager Tool . 44Figure 44: Screen Saver Options . 47Figure 45: IC755CxWxxCDx Example Package Contents . 51GFK-2847XJune 2018v
ContentsFigure 46: Basic Setup Diagram . 52Figure 47: Power Input Connector . 53Figure 48: Set System Clock .54Figure 49: Mount within 30 Degrees to Vertical . 56Figure 50: Mounting Holes (top & bottom edges) IC755CxS06RDx . 57Figure 51: Mounting Holes (top & bottom edges) IC755CxW07CDx . 57Figure 52: Mounting Holes (top & bottom edges) IC755CxS10CDx . 57Figure 53: Mounting Holes (all four edges) IC755CxS12CDx .58Figure 54: Mounting Holes (all four edges) IC755CxS15CDx .58Figure 55: Panel Cutout Dimensions IC755CxS06RDx or IC755CxW07CDx .60Figure 56: Panel Cutout Dimensions IC755CxS10CDx . 60Figure 57: Panel Cutout Dimensions IC755CxS12CDx . 60Figure 58: Panel Cutout Dimensions IC755CxS15CDx . 60Figure 59: Insert QuickPanel into Mounting Panel Cutout .60Figure 60: Align and Set Hook .61Figure 61: Tighten Screws .61Figure 62: VESA Mounting Holes IC755CxW07CDx or IC755CxS06RDx . 62Figure 63: VESA Mounting Holes IC755CxSxxCDx . 62Figure 64: Battery Cover Removal IC755CxS06RDx. 64Figure 65: Battery Harness Connection IC755CxS06RDx .64Figure 66: Harness Connector Orientation IC755CxS06RDx .65Figure 67: Battery Cover Removal IC755CxW07CDx .
QuickPanel Operator Interface User Manual GFK-2847X QuickPanel Operator Interface User Manual GFK-2847X June 2018 IC755CxS06RDx 62 Display IC755CxW07CDx 72 Display . Solution Provider solutionprovider.ip@ge.com Technical Support If you have technical problems that cannot be resolved with the information in this manual, please contact us
