Transcription
Yale KeyMark Protected Keyway CylindersAn ASSA ABLOY Group brand
Yale KeyMark protected keywayapplicationsdescriptionYale KeyMark is a protected keywayline of cylinders. Cylinders includemortise, rim, key-in-lever, key-in-knob,auxiliary, and interchangeable core.Interchangeable core is availablein both large and small format. Allformats can be tied into one masterkey system!contentsApplications.2Keys.3System Specifications.4Cylinder Types. 5-12.Collars.13Accessories.14Construction Core Program.15protectedYale KeyMark keyways are considered as'protected' by Yale and special proceduresare in place to ensure their integrity.See page 4 for more information.certificationsproduct specificationsAll cylinders to have an angled keyway that accepts a keyblank that isconstructed with the same angle. All cylinders shall be available in any of themortise, rim, cylindrical or interchangeable core types. All cylinder components(excluding tumbler pins and fasteners) shall be constructed of the samematerial; this material shall be extruded brass. All cylinders shall be capableof utilizing the same key sections and the same key cutting depth and spacespecification without any loss of keying capacity. Cylinders shall containstandard pins, a portion of which, both bottom and top, shall be spooled forgreater resistance against picking.ANSI/BHMA A156.5 Grade 1E09211 (Mortise)E09221 (Rim)E09231 (Bored Lock Cylinders)applicationsEspecially recommended for installationsrequiring protected key controlprotection. Ideally suited for Educationaland Healthcare facilities, Industrial, andCommercial buildings.features and benefitsFeaturesBenefits Unique Yale KeyMark Security Leg keyway angle Will not interchange with KeyMark by Medeco Protected key control through the Security Legkeyway2 Provides increased resistance against picking and impressioning Convenient, simple to service No extra internal moving parts such as side bars Available in 6- and 7-pin cylinders Can easily retrofit into existing systems Able to master key SFIC, LFIC and fixed corecylinders to the same keying system One key can operate small format IC, as well as large format IC, and fixed corecylinders Uses common style pins No angle tip or interlocking pins which result in loss of keying capacity Different keying specifications from conventionalYale systems Increased master keying capacity over conventional Yale keying systems New keyways Will not interchange with current Yale or KeyMark by Medeco key systems, resultingin increased protection for the owner
Yale KeyMark protected keywaykeyssecurity leg The Yale KeyMark keyway has three distinct components: anupper portion or blade, a middle ledge, and a unique, lower angledportion or leg which exits the plug at an angle.BLADEThe Security Leg keyway offers these advantages:1. Keyway differentiation by angle2. Increased picking resistance3. Prevents other manufacturers’ or other angle users’ keysfrom entering the cylinder4. A unique and strong protected key with true key control5. A key blank of added thickness for extra strengthand durability6. Prevents duplication of keys on standard key machineskey warrantyYale KeyMark keys are covered by a lifetime warranty againstbreakage under normal usage conditions. Refer to the currentLEDGESECURITY LEG MILLING FORKEYWAY WARDSYale pricebook for additional warranty information.Plug View Shownkeys and key stampingHow to Order ExampleKeyBlank DescriptionsBow StyleMaterialNumber11KN(NickelSilver)117Used For6-pin6-pin7-pin7-pinMaster/Change KeysSFIC Control KeysMaster/Change KeysSFIC Control Keys117C6-pin LFIC Control Keys118C7-pin LFIC Control Keys91C6-pin Schlage Control KeysstampingAll keys will come standard with keybow and stampings asshown. Control keys for LFIC will be furnished with a largerkeybow.Front SideKeywayKeywaydesignations notprinted for r to systembitting list for correctkeyway.backside stamping options Keyset (VKC1) standard – unless otherwise indicated System registry number will be stamped on upper-levelkeys unless otherwise indicated Concealed key control (CKC2 only) available on cylinders Visual key control (VKC2 and VKC3) not available oncylindersBack Side3
Yale KeyMark protected keywaysystem specificationskeywaysKeyway Administration andAssignmentFor security purposes, the keywayhierarchies and profiles are not printed.All keyways will be noted on the masterkey system bitting list.Yale Key Systems Administration willassign all Yale KeyMark keyways.Keyways will be assigned according tofacility type, geographic location, andkeying system specifications. All keys willdirect ship to the end user. All masterkey systems will be registered with KeySystems Administration and all bittingswill be factory created.System Administration & KeyControlKey control will be maintained throughcompliance with the Yale SecurityPolicy: for a copy contact Key SystemsAdministration or visit our website atwww.yalelocks.com. System informationand/or systems related product will beforwarded directly to the owner, unlessotherwise indicated by the owner’sappointed administrator.Primary Systems AdministratorsAll Yale KeyMark master key systemsmust have a signed Notice ofAcceptance for the Facility on file withKey Systems Administration. The Noticeof Acceptance designates the primarysystems administrator of the facility.Unless otherwise indicated by theprimary systems administrator by way ofa separate specific letter of authorization,all shipments for Yale KeyMark productwill go to the shipping address as perthe Notice of Acceptance.For every master key system that isestablished, a separate Owner’s Binderwill be sent directly to the primarysystems administrator. This Owner’sBinder will include all the informationneeded by the Facility to maintain theYale KeyMark master key system,4including system-specific RegistrationCertificates which are required forall future orders to be placed for thesystem.All keyblanks to be maintained in thepossession of the facility must beaccounted for. Any defective, incorrectlycut or damaged key blank must beretained in the facility's possession to bereturned to Yale on a quarterly basis.keying specifications6- or 7-pin with two nickel silverchange keys per cylinder. YaleKeyMark cylinders may be furnisheduncombinated, master keyed, orgrandmaster keyed to a specific facility.Keyed random or 0-bitted cylinders arenot available. For uncombinated, specifyUC. UC are furnished less pins, springs,pin covers and keys.system specificationsYale KeyMark uses the A2 pinningspecification for all types of cylinders.To ensure the security and integrity ofeach master key system, the followingguidelines should be followed: Master key systems are independentand cannot be keyed into existingand/or conventional Yale master keysystems. Cylinders are to be keyed to factorygenerated bittings only. Master key systems are not to exceedfive levels of keying. Proper keying nomenclature must beused for all systems. Cross keying is not available. Construction master keying isnot available. See page 15 forconstruction core program. Selective master keys are notrecommended. If required, theymust be established at the inception ofthe keying system.finishesYale KeyMark cylinders are availablein the following ANSI/BHMA finishesoffered by Yale.ANSI/BHMACodeFinish Description605Bright Brass, Clear Coated606Satin Brass, Clear Coated612Satin Bronze, Clear Coated613Dark Oxidized Satin Bronze,Oil Rubbed618Bright Nickel (matching 630)619Satin Nickel (matching 629)625Bright Chrome Plated626Satin Chrome Plated
Yale KeyMark protected keywaymortise cylindersfixed coreFor use with mortise and auxiliary 2"1-3/4"2"6 or 7KC1(For cam options,see page 14.)All cylinders are drilled for 7-pins. Length must be specified.Mortise Fixed Core (FC)how to order examplesMortise Cylinder Ordered tFinish50K1001-1/4"6XXKC1AA1626Collar not furnished with cylinder ordered separately.Mortise Lockset with a Yale KeyMark Collar - 1765 furnished standard when ordered with lockset.For Collar applications, see page 13.Exceptions: Yale KeyMark cylinders are notavailable for the following: 8820, 8820FL, 8827,8827FL, 8832, 8832FL.Mortise Lock AUR 8805FLwith K100 Cylinder5
Yale KeyMark protected keywayrim cylindersfixed coreFor use with exit devices and auxiliary locking devices.CylinderLengthPinsTailpieceK3001-1/8"6 or 7KT1 HorizontalBreak-off **For vertical application change orientation of tailpiece.All cylinders are drilled for 7-pins.Rim Fixed Core (FC)how to order examplesRim Cylinder Ordered tFinish50K3006XXKT1AA1626Collar not furnished with cylinder ordered separately.Exit Device with a Yale KeyMark HandFinish507150626FK3006XXAA1RHR626For Collar applications, see page 13.Heavy-Duty Exit Device Trim 626Fwith K300 Cylinder and KP4 Collar6
Yale KeyMark protected keywaykey-in-knob and key-in-lever cylindersfixed core component and interchangeable coreFor use with lever and knob series locksets.CylinderPinsTrim Type7NA**NATailpiece*K400Knob, Yale 5300, 5400 Series6XK402Lever, Yale 4700LN, 5300LNXK402Lever, Yale 5400LN, 6400LN SeriesK404Knob/Lever, Yale 4300, 4300LN, 4800LN SeriesXNAKT3K490Lever, Schlage A, D & ND SeriesXNAKT5XNAKT2KT2XKT7*Length varies by function and application. For tailpiece options, see page 14.**7-Pin available only for CA design with 5300 and for CA and BR designs with 5400.Key-in-knob (KIK),Key-in-lever (KIL)Fixed Core (FC)how to order examplesComponent Cylinder Ordered K4006XXAA1626Cylindrical Lock with a Yale KeyMark Fixed Core Cylinder or etFinish6XXAA1626K402 (Fixed Core) or*K600 (Small Format IC) - see page 9, or*K800 (Large Format IC) - see page 8.how to order with construction temporary cores(See page 15 for Construction Core Program)Cylindrical Lock with a Temporary LFICQuantityTrimLockCylinderKey CodeHandFinish50AU5407LN1210CT6LLRHR626For permanent core ordered separately, see “Core Only” on page 8.Cylindrical Lock with a Temporary, Lockable SFICQuantityTrimLockCylinderKey CodeHandFinish50B-AU5407LNK926CT6SLRHR626For permanent core ordered separately, see “Core Only” on page 9.Heavy-duty Cylindrical LockAU5407LN with K800 Core7
Yale KeyMark protected keywayinterchangeable core cylinderslarge format mortiseFor use with mortise andauxiliary locksets.Complete cludedX1-11/16"X1-3/4"X2"XXXXK8001-1/2"Complete MortiseCylinder (LFIC)Schlage LFICKC1(For camoptions,see page 14.)XX1-3/4"XX2"XXXNAK890 X1-11/16"K860Cam7how to order examplesMortise Cylinder Ordered SeparatelyCompleteCylinderHousingOnlyCore K800--6XX--AA1626Collar not furnished with cylinder ordered separately.Large FormatInterchangeable Core (LFIC)Mortise Lockset with a Yale KeyMark LFIC knessFinish50AUR8805FLK8206AA1RHR1-3/4"626Collar - 1765 furnished standard when ordered with lockset. For Collar applications, see page 13.how to order with construction temporary cores(See page 15 for Construction Core Program)Mortise Lockset with Temporary LFICQuantityTrimLockCylinderKey 4"626For permanent core ordered separately, see “Core Only” above.Mortise Cylinder Separately with Temporary LFICMortise Lock AUR 8805FLwith K820 Cylinder8QuantityCylinderLengthCamKey CodeFinish50K8251-1/2"KC1CT6LL626For permanent core ordered separately, see “Core Only” above.
Yale KeyMark protected keywayinterchangeable core cylinderssmall format mortiseFor use with mortise and omplete MortiseCylinder (SFIC)Non-TaperedMortise HousingK660Tapered Mortise (For camoptions,see page14.)XXXXX* Tapered housings (not illustrated) are designed for narrow stile/backset applications,(storefront doors). Recessed collars are not necessary.how to order examplesMortise Cylinder Ordered SeparatelyQuantity CylinderCompleteCylinderHousingOnlyCore 6Collar not furnished with cylinder ordered separately.Small Format InterchangeableCore (SFIC)Mortise Lockset with a Yale KeyMark SFIC knessFinish50AUR8805FLK6206AA1RHR1-3/4"626Collar - 1765 furnished standard when ordered with lockset. For Collar applications, see page 13.how to order with construction temporary cores(See page 15 for Construction Core Program)Mortise Lockset with Temporary, Lockable SFICQuantityTrimLock50AUR8805FLCylinder Key CodeK625CT6SLHandThicknessFinishRHR1-3/4"626For permanent core ordered separately, see “Core Only” above.Mortise Lockset with Temporary, Disposable SFICMortise AUR 8805FLwith K620 CylinderQuantityTrimLock50AUR8805FLCylinder Key CodeK625CT6SDHandThicknessFinishRHR1-3/4"626For permanent core ordered separately, see “Core Only” above.9
Yale KeyMark protected keywayinterchangeable core cylinderslarge format rimFor use with exit devices and auxiliary locking ludedK880Complete RimCylinder (LFIC)Schlage lBreak-off(For verticalapplication,changeorientation oftailpiece)how to order examplesRim Cylinder Ordered SeparatelyQuantity CylinderCompleteCylinderHousingOnlyCore 26Tailpiece andMounting HardwareCollar not furnished with cylinder ordered separately.Exit Device with a Yale KeyMark LFIC HandFinish507150626FK8406XXAA1RHR626For Collar applications, see page 13.how to order with construction temporary cores(See page 15 for Construction Core Program)Exit Device with Temporary LFICQuantityDeviceTrimCylinderKey CodeHandFinish507150626FK845CT6LLRHR626For permanent core ordered separately, see “Core Only” above.Heavy-DutyExit Device Trim 626Fwith K840 Cylinderand KP4 CollarRim Cylinder Separately with Temporary LFICQuantityCylinderTailpieceKey CodeFinish50K845KT1CT6LL626For permanent core ordered separately, see “Core Only” above.10
Yale KeyMark protected keywayinterchangeable core cylinderssmall format rimFor use with exit devices and auxiliarylocking luded--K680K600----Complete Rim --1-3/8"XX--XXTailpiece (TP)KT1Horizontal Break-off(For verticalapplication, changeorientation oftailpiece.)how to order examplesRim Cylinder Ordered SeparatelyQuantity CylinderCompleteCylinderHousingOnlyCore Collar not furnished with cylinder ordered separately.Exit Device with a Yale KeyMark SFIC CylinderQuantity 626FK6406XXAA1RHR626For Collar applications, see page 13.how to order with construction temporary cores(See page 15 for Construction Core Program)Heavy-DutyExit Device Trim 626Fwith K640 Cylinderand KP4 CollarExit Device with Temporary, Lockable SFICQuantityDeviceTrimCylinderKey CodeHandFinish507150626FK645CT6SLRHR626For permanent core ordered separately, see “Core Only” above.Rim Cylinder Separately with Temporary, Disposable SFICQuantityCylinderTailpieceKey CodeFinish50K645KT1CT6SD626For permanent core ordered separately, see “Core Only” above.11
Yale KeyMark protected keywayauxiliary locks/padlocksbored auxiliary deadlocksFor use with bored auxiliarydeadlocks.CylinderPinsUsed With67TailpieceK202Yale 4800LN SeriesXNAKT8K290Schlage “B”XNAKT6Note: For D series LFIC, refer to page 8 for K800 information.how to order examplesCylinder Ordered tFinish50K2026XXKT4AA1626padlocksFor use with Yale PD500 Series Large or Small Format Interchangeable Core padlocks.how to order examplesPadlock with a Large Format Yale KeyMark 06XXAA1For How To Order core only, refer to page 8.Padlock with a Small Format Yale KeyMark 06XXAA1For How To Order core only, refer to page 9.12
Yale KeyMark protected keywaycollarsKP3Wave Washer(Furnished standard with 1765 collar.)1765Solid Recessed1765 collar application guide for mortise lock standard "sectional" and all Reflections trimsTypeCylinderLengthDoor 0/860K820/8601-11/16".844.750* Indicates cylinder length not sufficient for door/escutcheon thickness; select a longer .594.5001765 collar application guide for mortise lock “escutcheon” trimCamdenCylinderDoor ThicknessTypeLength 1-3/4"K1001-1/8"K100K620/660K620K100K820/860SL or EastonLenoirDoor ThicknessDoor 1251-3/8".125NC NC 125.469.344.219.062.719.563.469.312K820/860 1-11/16"Copenhagen*Indicates cylinder length not sufficient for door/escutcheon thickness, select a longer cylinder.Door Thickness2-1/4" 594.469.375.219.750.594.469.375.844.656.531.406 Single cylinder onlyNC No Collar Requiredcollar application guide for exit device sh /K6601-3/4"KP41765.375Collar sizes are based on 1-3/4" door thickness, for sizes other than those shown contact Yale technical support.13
Yale KeyMark protected †KC1KC2KC42160KC22130KC31161/Schlage straightKC4KC51161L (AR)KC61161G (KeySwitch)KC7KC8Corbin Russwin cloverleaf (A01)KC9Sargent StraightKC10Yale Affinity 1160Schlage cloverleaf†Furnished standard unless otherwise specified.Cylinder Accessories*NumberKP1KP2ReferenceCam WasherScrews*Note: Yale KeyMark cams and cylinder accessories arenot interchangeable with other Yale cylinders.NumberKT1KT2KT3KT4KT5KT6KT7Used IC Rim6-Pin KILKILAuxiliarySchlage KIL KitSchlage Auxiliary7-Pin KILKT8K2026-Pin Interconnected Lockservice toolsPin KitEach pin kit has all the pinsnecessary to combinate Yale KeyMark FC, SFIC and LFICcylinders.How To OrderK918Key Cutting Equipment & AccessoriesNumberKey PunchK900Key Punch Vise (K900 Machine)K901K900Key PunchThis code-cutting punch features automatic key advance and interchangeable vise assembly. The key punch can rest on yourworkbench, or it can be mounted securely to the bench by means of the two mounting holes located in the base.Tools & FixturesFlattening (Staking) Tool for K800 LFICK400 Series Staking Tool (Non-IC)Holding Fixture for Mortise, Rim, Component, and K800IC Pinning Block (6- or 7-Pin)Key Gauge/DecoderIC Pin EjectorIC Hand Capping PunchJaw, tip gauge & code card for HPC 15
Yale KeyMark protected keywayconstruction core programconstruction master keyingFor security reasons, Yale KeyMark cylinders are not availableconstruction master keyed. Temporary construction cores areavailable for both SFIC and LFIC. Temporary cores for SFIC areavailable with either disposable or locking cores. Temporary coresfor LFIC are available with only lockable cores. Please note thattemporary cores are not available in competitor formats.When requesting locksets or cylinders with temporary cores whereYale KeyMark cores will be used for the permanent master keysystem, the proper ordering procedures must be followed to ensurethe issuance of the correct cylinder collars and housings. For allTemporary Construction core orders, both the cylinder and key codedesignations must be specified. See this page and pages 7-11 forHow to Order Examples.Key CodesDescriptionCT6LL6-pin with large format lockable temporary coreCT6SL6-pin with small format lockable temporary coreCT6SD6-pin with small format disposable temporary coreCT7LL7-pin with large format lockable temporary coreCT7SL7-pin with small format lockable temporary coreCT7SD7-pin with small format disposable temporary coreLarge Format (LFIC)Yale’s 1210/1220 cores are furnished when the following cylinderdesignations are lete CylinderUsed WithCylindricalCylindricalMortiseK845Complete CylinderRimHow to Order Example:Mortise Lockset to be Furnished with Temporary LFICFor the above example, the customer would receive completemortise locksets with Yale KeyMark K860-1-1/2" housings, 1765.594collars and 6-pin Yale 1210 keyed alike core. The Yale KeyMarkpermanent cores, K800, would be ordered separately.50LockAUR 8805FLCylinderK825KeyHand Thickness FinishCodeCT6LL RHR1-3/4"CylinderDescriptionUsed WithK9256/7-pin Disposable Thumb Turn OnlyCylindricalK9266/7-pin Lockable Core OnlyCylindricalK625Complete CylinderMortiseK635Complete CylinderMortise-TaperedK645Complete CylinderRimOption 1: Disposable SFIC (K925)All locksets and cylinders will be provided with disposable thumb-turntype cores. No keys are required. These cores are disposable andcannot be returned. See pages 9 & 11 for additional examples.How to Order Example:Mortise Lockset to be Furnished with Temporary, Disposable SFICFor the above example, the customer would receive completemortise locksets with Yale KeyMark K660 – 1-1/4" housings,1765.375 collars and disposable thumb-turn cores, K925. The YaleKeyMark permanent cores, K600, would be ordered separately.Qty. Trim50LockCylinderAUR 8805FLK625KeyHand Thickness FinishCodeCT6SD RHR1-3/4"626Option 2: Lockable SFIC (K926)All locksets and cylinders will be provided with keyed alike standardSFIC cores that are unrelated to the permanent master key system.Temporary operating and control keys are required, quantities mustbe specified. At the completion of the construction phase, thesetemporary cores can be returned. See pages 9 & 11 for additionalexamples.All locksets and cylinders ordered with large format interchangeablecores will be provided with keyed alike standard Yale 1210 or1220 temporary cores. Temporary operating and control keys arerequired and quantities should be specified. At the completion of theconstruction phase, these temporary cores can be returned. Referto the current Yale price book for details. See pages 7, 8 & 10 foradditional examples.Qty. Trimthe following cylinder designations are used:626Small Format (SFIC)Small format temporary cores can be provided with two options:Disposable or Lockable.Either disposable or K926 (6-pin lockable) cores are furnished whenHow to Order Example:Exit Device to be Furnished with Temporary, Lockable SFICFor the above example, the customer would receive complete exitdevices and trim with Yale KeyMark K680 housings, KP4 collars andtemporary locking SFIC cores, K926. The Yale KeyMark permanentcores, K600, would be ordered 507150626FK645CT6SLRHR626How To OrderSystems requiring SFIC temporary cores must be ordered eithercompletely with disposable, or lockable cores. Locksets and /orcylinder on a particular purchase order may not be mixed with SFICtemporary core types.Lockable SFIC cores, K926, and disposable SFIC cores, K925, maybe purchased separately. Refer to the Yale KeyMark pricing tab fordetails.15
Yale KeyMark protected keywayonline literature and templatesFor the latest information on Yale Locks & Hardware products, visit our website at: www.yalelocks.comClick on the “Product Information” button to find: CatalogsParts manualsTemplatesSpecificationsInstallation instructionsYale customers can click on the ebusiness symbol on the website to register for an ebusiness account to:Check the status of ordersCheck availability of QuickShip itemsTrack your order and confirm deliveryReceive email notification of template changesAnd More.Or contact us at:U.S.A.Yale Locks & HardwareAddress: 225 Episcopal Road, Berlin, CT 06037-4004Tel: 1-800-438-1951 Fax: 1-800-338-0965 www.yalelocks.comCanada:ASSA ABLOY Door Security Solutions CanadaAddress: 160 Four Valley Drive, Vaughan, Ontario L4K 4T9Tel: 1-800-461-3007 Fax: 1-800-461-8989 www.assaabloy.caInternational:ASSA ABLOY Americas InternationalTel: 1-905-821-7775 Fax: 1-905-821-1429 www.assaabloyai.comYale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company.Yale , Affinity and Reflections are registered trademarks of Yale Security Inc., an ASSA ABLOY Group company. KeyMark and Security Leg are registered trademarks of MedecoSecurity Locks, Inc., an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their respective owners and are mentioned for referencepurposes only. These materials are protected under U.S. copyright laws. All contents current at time of publication. Yale Security Inc. reserves the right to change availability of any item in thiscatalog, its design, construction, and/or its materials. Copyright 2002, 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part withoutthe express written permission of the Yale Security Inc., an ASSA ABLOY Group company. is prohibited.YALE, with its unique global reach and range of products, is the world’s favorite lock.ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.42050-6/13RAn ASSA ABLOY Group brand
605 Bright Brass, Clear Coated 606 Satin Brass, Clear Coated 612 Satin Bronze, Clear Coated 613 Dark Oxidized Satin Bronze, Oil Rubbed 618 Bright Nickel (matching 630) 619 Satin Nickel (matching 629) 625 Bright Chrome Plated 626 Satin Chrome Plated
