WIXLIB

USER’S MANUALM OD E R N S OU N D FOR YOUR CLASSICwww.retromanufacturing.com

TABLE OF CONTENTSWELCOME3WHAT’S IN THE BOX4PRECAUTIONS5INSTALLATION INSTRUCTIONS8WIRING DIAGRAM9OPERATING YOUR RADIO1BASIC OPERATION12TONE CONTROLS15SYSTEM SETTINGS17USB/APPLE DEVICE INSTRUCTIONS22BLUETOOTH INSTRUCTIONS25TROUBLESHOOTING27FREQUENTLY ASKED QUESTIONS28SPECIFICATIONS31LIMITED WARRANTY32REPLACEMENT PARTS33INSTALLATION NOTES34

APPLE LICENSINGMade for iPod Made for iPhone (Correct function of earlier versionscannot be guaranteed.)(Correct function of earlier versions iPod Touch (5th generation): Ver. 9.3.5 iPod Touch (4th generation): Ver. 6.1.2 iPod Touch (3rd generation): Ver. 5.1 iPod Touch (2nd generation): Ver. 4.2.1 iPod Nano (6th generation): Ver. 1.1 iPod Nano (5th generation): Ver. 1.0.2 iPod Nano (4th generation): Ver. 1.0.4 iPod Nano (3rd generation): Ver. 1.1.3 iPod Classic (160 GB) (Late 2009): Ver. 2.0.4 iPod Classic (120 GB): Ver. 2.0.1 iPod Classic (80 GB, 160 GB): Ver. 1.1.2cannot be guaranteed.) iPhone SE: Ver. 10.1.1 iPhone 6s Plus: Ver. 10.1.1 iPhone 6s: Ver. 10.1.1 iPhone 6 Plus: Ver 10.1.1 iPhone 6: Ver. 10.1.1 iPhone 5s: Ver. 10.1.1 iPhone 5: Ver. 10.1.1 iPhone 4s: Ver. 9.3.5 iPhone 4: Ver. 7.1.2 iPhone 3Gs: Ver. 6.1.6 iPhone 3G: Ver. 4.2.1For clarity in identifying your model of iPod, please see Apple’s document“Identifying iPod models” at http://support.apple.com/kb/HT1353.“Made for iPod ” and “Made for iPhone ” mean that an electronics accessory has beendesigned to connect specifically to iPod or iPhone respectively, and has been certified by thedeveloper to meet Apple performance standards. Apple is not responsible the operation of thisdevice or its compliance with safety and regulatory standards. Please note that the use of thisaccessory with iPod or iPhone may affect wireless performance. Apple is not responsible for theoperation of the device or its compliance with safety and regulatory standards.iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.Windows Media and the windows logo are trademarks, or registered trademarks of MicrosoftCorporation in the United States and/or other countries.The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of suchmarks by Retro Manufacturing, LLC are under license. Other trademarks and trade names arethose of their respective owners.2Copyright 2017 Retro Manufacturing, LLC

WELCOMEThank you for purchasing a RetroSound radio. Newport has theadvanced features you expect from a modern car stereo.General Features The only classic car radio compatible with iPod and iPhone Built-in Bluetooth for hands-free calling and audio streaming Plays MP3 and WMA files via USB input Selectable Green or Amber LCD illumination with user presets AM/FM tuner with 30 presets and RDS Selectable international tuner frequencies Built-in amplifier (25 watts RMS/45 watts peak x 4 channels) 3 EQ presets plus user-controlled bass, mid-range,treble, fader, and balance adjustment Inputs: 2 standard USB ports and 2 auxiliary inputs Outputs: 6-channel pre-amp outputs (front, rear, subwoofer) Separate power antenna and amplifier turn-on lead(s) 2 year warrantyThe Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such marks by Retro Manufacturing, LLC is under license.iPod and iPhone , are trademarks of Apple Inc., registered in the U.S. and other countries.The information enclosed in this user’s manual is to be used as a guide to assistyou with installation and operation of your radio. This guide does not coverevery installation possibility, vehicle, or every aspect of the installation process.Retro Manufacturing, LLC, RetroSound , or its subsidiaries, assume noresponsibility for any installation. This manual may be updated from time to time.Visit our website for the latest updates: www.retromanufacturing.com.3

WHAT’S IN THE BOXThe items shown below are packaged with your radio box.Main Wiring Harness(plugs into back of radio)Power and SpeakerWiring Harnesses(both plug into MainWiring Harness)Metal Mounting Back StrapBluetooth MicrophoneNewport RadioHardware Kit4Copyright 2017 Retro Manufacturing, LLC

PRECAUTIONSPLEASE OBSERVE THESE PRECAUTIONS WHEN INSTALLINGAND USING THIS UNIT:This user’s manual does not cover all possible installation scenarios.If you feel you can’t install this unit yourself, take it to a local caraudio professional. Feel free to contact us if you have questionsabout installing your radio. Do not disassemble or modify the unit or attempt torepair the unit yourself. If the unit needs to be repaired,consult your dealer or Retro Manufacturing, LLC. Do not use the unit when it is out of order. If the unit is out oforder or is in an abnormal state (has foreign objects in it, isexposed to water, is smoking or smells), turn it off immediatelyand consult your dealer or Retro Manufacturing, LLC. Refer fuse replacement to qualified service personnel.When the fuse blows, eliminate the cause and have itreplaced by a qualified service technician with the fuseprescribed for this unit. Incorrect replacement of the fusemay lead to smoke, fire and damage to the unit. If the unit does not turn on, check the connections first. Thencheck the fuse in your vehicle’s fuse box and the fuse atthe unit’s wiring harness. Do not expose the unit to directsunlight or excessive heat. Excessive heat will raise theinterior temperature of the unit, which may damage it. Do not use the unit where it is exposed to moisture or dust.Exposure of the unit to moisture or dust may lead to smoke, fireor other damage to the unit and will void your warranty. Makesure the unit does not get wet in car washes or on rainy days.5

PRECAUTIONS Refer wiring and installation to qualified service personnel.Installation of this unit requires special skills and experience.For maximum safety, have it installed by your dealer orqualified service professional. Retro Manufacturing, LLCis not liable for any problems resulting from improperinstallation of the unit. Please be sure to follow theinstructions carefully while attempting installation. Follow instructions to wire the unit. Failure to follow the instructionscould cause damage to the unit, fire, injury or death. Be careful not to damage the leads. Prevent them frombeing caught in the vehicle chassis or from being damagedby screws or moving parts such as seat rails. Do not scratch,pull, bend or twist the leads. Do not install them near heatsources or place heavy objects on them. If leads mustbe routed around sharp metal edges, protect them bywrapping them with vinyl tape or similar protections.NOTE: Cutting the main wire harness, antenna lead, USB or auxiliary cables willvoid the warranty of your radio. Use the designated parts and appropriate toolsto install this unit. The use of parts other than thosesupplied may result in internal damage to the unit. Do not interfere with safety-related vehicle components.Do not wire or affix this unit to the fuel tank, brakes,suspension, steering wheel, pedals, etc. Check for electricwiring, piping and other items before installing the unit. Never install the unit in a location where itinterferes with your field of vision.6Copyright 2017 Retro Manufacturing, LLC

PRECAUTIONS Never splice into the power lead to supplyother equipment with power. After installation and wiring, always check the normaloperation of other electrical equipment. Make sure that no wires interfere with drivingor getting in and out of the vehicle. Insulate all exposed wires to prevent short-circuiting or electric shock. Do not operate the unit for prolonged periodswith the engine off. Prolonged operation with theengine turned off will drain the battery. To prevent accidents, keep the volume of your radio at a levelthat allows you to hear outside noises such as emergencysirens and train crossing warnings. Prolonged exposureto high volume levels may also result in hearing loss. This unit requires 12 volts to both the red and yellow power leads.The unit will not work without power to both of these leads. Disconnect the negative (-) battery cable before beginninginstallation. Verify the battery ground by checking that onewire is connected to the vehicle’s starter mounting bolt orengine block and the other to the vehicle’s chassis using atleast 8 gauge wire. Make sure the alternator or generatorconnections are secure and free from corrosion, rust or dirt. This unit is designed for operation with a negative ground12 volt DC battery system. Do not operate this unit withother battery systems, especially an 18 or 24 volt DC or apositive ground system. If you have a 6 volt system, youneed to either convert to 12 volt DC or purchase a separateinverter that would increase the voltage to 12 volts.NOTE: The inverter needs to be rated at 10 amps or higher in orderfor the radio to operate properly.7

INSTALLATION INSTRUCTIONSGetting StartedNewport comes completely pre-assembled. Before installingthe radio into your vehicle, you should make sure the shafts areplugged into the side of the radio. Holding the radio in front of youand viewing it as if it were installed, the top shaft plugs into the leftside of the radio, and the bottom shaft plugs into the right side.Figure 1 - Ensure Shafts are Plugged InRefer to the Newport Assembly Guide to install the radio into the dashusing the OEM-style plastic mounting hardware.Rear InputsOne USB and AUX connector cable is located at the rear of the radiobody. During installation, you must route the cables to a convenientand accessible location for plugging in USB and AUX devices. If thecable provided is not long enough, you may use our optional USB/AUXExtension Cable (not included) to extend the reach of the cable. Thiscable also allows you to install the USB/AUX port into the factory locationfor the cigarette lighter for a factory look and easy access.Plug in the Bluetooth microphone and route it to an accessable areasuch as the steering column or A-pillar.8Copyright 2017 Retro Manufacturing, LLC

INSTALLATION INSTRUCTIONSSTEP 4: Complete Wiring ConnectionsFigure 2 - Wiring DiagramNOTE: Cutting the wiring harness, antenna lead or auxiliary cablewill void your warranty.9

INSTALLATION INSTRUCTIONSNOTE: This unit requires 12 volts to both the red and yellow wires to operate properly.Locate the three wire harnesses: main wire harness, power wireharness and speaker wire harness (See “What’s in the Box”on page 4). First connect the main wire harness to the backof the radio. Then connect both the power and speaker wireharnesses to the black female plug of the main wire harness.After doing this, connect the bare wire ends of your power andspeaker wires to the appropriate power and speaker locations in yourvehicle (See Figure 2). Have your radio installed by a professional if thispart of the install is too difficult, or contact us if you have questions.Installation Notes To prevent damage to the unit, do not connect the powerconnector until you have completed the wiring process. This is a 12 volt negative ground ONLY radio. If youhave a positive ground, or a 6 volt system, you needto either convert to 12 volts or purchase a separateinverter that would increase the voltage to 12 volts. Please note that any inverter must be rated at 10 ampsor higher in order for the radio to operate properly.10Copyright 2017 Retro Manufacturing, LLC

INSTALLATION INSTRUCTIONSFAILURE TO SECURE THE RADIO WITH THE BACK STRAP CAN DAMAGEYOUR RADIO AND WILL VOID YOUR WARRANTY.Figure 3 - Installing the Back strapView from behind dash11

OPERATING YOUR RADIOBasic Operation678912345Figure 4 - Front Panel Controls1. Push-ButtonUSB 1 - Front Panel2. Push-ButtonUSB 2 - Rear3. Push-ButtonAUX 1 - Front Panel4. Push-ButtonAUX 2 - Rear5. Push-Button6. Top-Rear Knob7. Top-Front Knob8. Bottom-Rear Knob9. Bottom-Front Knob12Copyright 2017 Retro Manufacturing, LLC