Transcription
ACTUATORSNFPA Aluminum & Steel CylindersNFPA Series A Aluminum & J Steel Cylinders1-1/2 to 12 inch bore sizeImpact dampening sealsAdjustable captive cushion needleEcology cylinders meet OSHAnoise standardsConstructed of the finest materialsTechnical dataMedium:Filtered compressed air to 250 PSIPetroleum based hydraulic fluid to400 PSI*Operating temperature:Series A & J -20 F to 200 Fwith Viton Seals -20 F to 400 FOperating Pressure:250 PSIG Air, 400 PSIG Hydraulic*non-shock.NOTE: EA and EJ max pressurerating: 150 psi.Bore Sizes: 1-1/2", 2", 2-1/2",3-1/4", 4", 5", 6", 7", 8", 10"*, 12"*Lubrication:None requiredNorgren Air Cylinders are rated for“no lube added” service. All internalcomponents are lubricated at time ofassembly with a Teflon basedgrease.MaterialsHead and End Caps:(A and EA Series)black anodized aluminum alloy(J and EJ Series)precision machined steel*Tube:A & EA Series 1-1/2" to 12"J & EJ Series 1-1/2" to 2-1/2"Aluminum alloy, clear anodized O.D.,hard coat anodized I.D.J & EJ Series 3-1/4" to 12" has steeltube, with hard chrome plated I.D.Piston:A & EA series: machined highstrength aluminum alloy.J & EJ series: steelPiston rod: hard chrome plated steelRod Bearing: oil impregnatedsintered ironSeals: nitrile rod seal, urethane rodwiper, nitrile piston seals, nitrile tubeend sealsTie Rods: high-tensile strength steel1 Ultra Cushion Seals: Advanced designfeatures a unique, one-piece, compound seal ofnitrile* captured within a precision machinedgroove. Linear and radial “float” of the cushionseals eliminates misalignment. Ultra Cushionsprovide exceptionally fast “out of cushion” strokereversal. (Head and Cap Cushions are optional.)*Nitrile seals on the 5/8" & 1" rod diameter.For rod sizes 1-3/4" and larger, urethane seals are standard.12 O-Ring Tube Seal: Nitrile is standard. (Viton isoptional.)3 Adjustable Captive Cushion Needle: A onepiece, precision threaded brass cushionadjustment screw with a threaded steel capturering. It provides safe and precise cushionadjustment.2435634 Wiper Seal: Lip-type urethanewiper seal keeps contaminatesfrom getting into cylinder byaggressively wiping foreign materials from thepiston rod, enhancing therod seal life.5 Wear Ring: Reinforced Teflon compounded with polyphenylene sulfide providessupreme wear and excellent bearing support.6 Rod Seal: Nitrile lip type seal is pressureenergized and wear compensating for durabilityand long life.* J and EJ series onlyACT-6Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
5 Ultra Cushion Seals: Advanced design1 Piston Rod: Hard chrome plated high-tensilesteel, ground and polished.2 Rod Bearing: External removable threadedsteel bearing housing (black oxide finish), with anoil-impregnated sintered iron rod bearing.3 Rod Seal: Nitrile lip-type sealis pressure energized and wear compensating fordurability and long life.4 Head/Cap: Precision machined from alloyfeatures a unique, one-piece, compound seal ofnitrile* captured within a precision machinedgroove. Linear and radial “float” of the cushionseals eliminates misalignment. Ultra Cushionsprovide exceptionally fast “out of cushion” strokereversal. (Head and Cap Cushions are optional.)*Nitrile seals on the 5/8" & 1" rod diameter.For rod sizes 1-3/8" and larger, urethane seals are standard.6 O-Ring Tube Seal: Buna is standard. (Viton isoptional.)aluminum, then anodized for corrosion resistance(black finish).77 Tie Rods: High-strength steel maintains uniformcompression on tube end seals.8 Piston: Machined solid aluminum alloy, lightweight for low inertia, yet strong. Threaded pistonis installed with high strength threadlockeradhesive then staked to the piston rod.9 Adjustable Captive Cushion Needle: A onepiece, precision threaded brass cushionadjustment screw with a threaded steel capturering. It provides safe and precise cushionadjustment.6895436129wiper seal keeps contaminatesfrom getting into cylinder byaggressively wiping foreign materials from thepiston rod, enhancing therod seal life.Application InformationSeries A NFPA interchangeable aluminum air cylindersare offered with a variety of accessories, standard andoptional equipment to meet your application needs.11 Cylinder Tube: High-strength aluminumalloy ideally suited for air service. The tube isclear anodized on the O.D. and hard anodiccoated on the I.D., resulting in a smooth,corrosion and score resistant surface finish.The addition of a Teflon wear ring to the outerperimeter of the piston provides lubrication to thecylinder for an extended period of time over cylinderswithout a wear ring.4131110 Wiper Seal: Lip-type urethane12121012 Piston Seals: Long-wearingnitrile seals.13 Wear Ring: Reinforced Teflon compounded with polyphenylene sulfide providessupreme wear and excellent bearing support.Standard non-cushioned Series A cylinders arerecommended for applications that require fullbottoming of the piston and where the noise emitted bythe metal-to-metal impact between the piston andcylinder end caps is tolerable. We recommend thatoptional non-adjustable cushions be added for pistonspeeds (moving light tools) ranging from 15 to 30in/sec. For speeds exceeding 30 in/sec, the cylindersshould be equipped with adjustable air cushions.Norgren.com/usa – 303.794.2611 – help@amer.norgren.comACT-7ACTUATORSSeries A Cylinders are constructed with the finest materials for each component!
ACTUATORSNFPA Aluminum & Steel CylindersSeries EA Ecology Cylinders are constructed with the finest materialsfor each component! 1 Ultra Cushion Seals: Advanced designfeatures a unique, one-piece, compound seal ofnitrile* captured within a precision machinedgroove. Linear and radial “float” of the cushionseals eliminates misalignment. Ultra Cushionsprovide exceptionally fast “out of cushion” strokereversal. (Head and Cap Cushions are optional.)*Nitrile seals on the 5/8" & 1" rod diameter.For rod sizes 1-3/8" and larger, urethane seals are standard.2 Impact Dampening Piston Seals: Our impactdampening piston seals, in conjunction with ouradvanced cushion design, decelerate and reduceend-of-stroke noise.3 Piston: Machined solid aluminum alloy, lightweight for low inertia, yet strong. Threadedpiston is installed with high strengththreadlocker adhesive then staked to the pistonrod.5 Adjustable Captive Cushion Needle (notshown): Fine thread allows for safe andprecision adjustment of cushion.6 Wiper Seal: Lip-type urethane wiper sealkeeps contaminates from getting into cylinderby aggressively wiping foreign materials fromthe piston rod, enhancing the rod seal life.7 Piston Rod: Hard chrome plated high-tensilesteel, ground and polished.4 O-Ring Tube Seal: Buna is standard. (Vitonis optional.)1223467984101211113810 Tie Rods: High-strength steel maintainsuniform compression on tube end seals.8 Head/Cap: Precision machined from alloyaluminum, then anodized for corrosionresistance (black finish).9 Wear Ring: Reinforced Teflon compoundedwith polyphenylene sulfide provides supremewear and excellent bearing support.ACT-811 Cylinder Tube: High-strength aluminum alloy12 Rod Seal: Nitrile lip-type seal is pressureenergized and wear compensating fordurability and long life.ideally suited for air service. The tube is clearanodized on the O.D. and hard anodic coated onthe I.D., resulting in a smooth, corrosion andscore resistant surface finish.13 Rod Bearing: External removable steelbearing housing (black oxide finish), with anoil-impregnated sintered iron rod bearing.Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
Series J Cylinders are constructed with the finest materials for each component!1 Piston Rod: Hard chrome plated high-tensilesteel, ground and polished.2 Rod Bearing: External removable threadedsteel bearing housing (black oxide finish), with anoil-impregnated sintered iron rod bearing.3 Rod Seal: Nitrile lip-type seal is pressureenergized and wear compensating for durabilityand long life.4 Head/Cap: Precision machined from steel,then black oxide finished 1-1/2" to 2-1/2" bores.Painted black finish on 3-1/4" to 12" bores. 5 Ultra Cushion Seals: Advanced designfeatures a unique, one-piece, compound seal ofnitrile* captured within a precision machinedgroove. Linear and radial “float” of the cushionseals eliminates misalignment. Ultra Cushionsprovide exceptionally fast “out of cushion” strokereversal. (Head and Cap Cushions are optional.)*Nitrile seals on the 5/8" & 1" rod diameter.For rod sizes 1-3/8" and larger, urethane seals arestandard.Tie7 Rods: High-strength steel maintains uniformcompression on tube end seals.8 Piston: Machined solid steel, for highstrength. Threaded piston is installed with highstrength threadlocker adhesive then staked to thepiston rod.9 Adjustable Captive Cushion Needle: A onepiece, precision threaded brass cushionadjustment screw with a threaded steel capturering. It provides safe and precise cushionadjustment.6 O-Ring Tube Seal: Buna is standard. (Viton isoptional.)6798543612101112 13124910 Wiper Seal: Lip-type urethane wiper sealkeeps contaminates from getting into cylinderby aggressively wiping foreign materials fromthe piston rod, enhancing the rod seal life.11 Cylinder Tube: High-strength aluminum alloy1-1/2", 2", 2-1/2" bore anodized on the O.D.and hard coat I.D. Steel cylinder tube hardchrome plated I.D. 3-1/4" to 12" bore.Application InformationThe addition of a Teflon wear ring to the outerperimeter of the piston provides lubrication to thecylinder for an extended period of time over cylinderswithout a wear ring.Series J NFPA interchangeable steel air cylinders areoffered with a variety of accessories, standard andoptional equipment to meet your application needs.12 Piston Seals: Long-wearing nitrile seals.13 Wear Ring: Reinforced Teflon compoundedwith polyphenylene sulfide provides supremewear and excellent bearing support.Standard non-cushioned Series J cylinders arerecommended for applications that require fullbottoming of the piston and where the noise emitted bythe metal-to-metal impact between the piston andcylinder end caps is tolerable. We recommend thatoptional non-adjustable cushions be added for pistonspeeds (moving light tools) ranging from 15 to 30in/sec. For speeds exceeding 30 in/sec, the cylindersshould be equipped with adjustable air cushions.Norgren.com/usa – 303.794.2611 – help@amer.norgren.comACT-9ACTUATORSNFPA Aluminum & Steel Cylinders
ACTUATORSNFPA Aluminum & Steel CylindersSeries EJ Ecology Cylinders are constructed with the finest materials foreach component!1 Ultra Cushion Seals: Advanced designfeatures a unique, one-piece, compound seal ofnitrile* captured within a precision machinedgroove. Linear and radial “float” of the cushionseals eliminates misalignment. Ultra Cushionsprovide exceptionally fast “out of cushion”stroke reversal. (Head and Cap Cushions areoptional.)*Nitrile seals on the 5/8" & 1" rod diameter.For rod sizes 1-3/8" and larger, urethane seals are standard.2 Impact Dampening Piston Seals: Our impactdampening piston seals, in conjunction with ouradvanced cushion design, decelerate and reduceend-of-stroke noise.4 O-Ring Tube Seal: Buna is standard. (Vitonis optional.)5 Adjustable Captive Cushion Needle (notshown): Fine thread allows for safe and precision3 Piston: Machined solid steel, for high strength. adjustment of cushion.\Threaded piston is installed with high strengththreadlocker adhesive then staked to the piston6 Wiper Seal: Lip-type urethane wiper sealrod.keeps contaminates from getting into cylinder byaggressively wiping foreign materials from thepiston rod, enhancing the rod seal life.122346798410121117 Piston Rod: Hard chrome plated high-tensilesteel, ground and polished.8 Head/Cap: Precision machined from steel,then black oxide finished 1-1/2" to2-1/2" bores. Painted black finish 3-1/4"to 12" bores. 9 Wear Ring: Reinforced Tefloncompounded with polyphenylene sulfide providessupreme wear and excellent bearing support.ACT-1010 Tie Rods: High-strength steel maintainsuniform compression on tube end seals.13812 Rod Seal: Nitrile lip-type seal is pressureenergized and wear compensating for durabilityand long life.11 Cylinder Tube: High-strength aluminum alloy1-1/2", 2". 2-1/2" bore anodized on the O.D.and hard coat I.D. Steel cylinder tube hardchrome plated I.D. 3-1/4" to 12" bore.13 Rod Bearing: External removable steelbearing housing (black oxide finish), with an oilimpregnated sintered iron rod bearing.Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
1Norgren cylinders are prelubriated for non-lubeoperation.2The summary of sound decibels chart illustratesthe operating sound levels.Operates Quietlyto MeetOSHA Specifications.The impact dampening qualities of thePiston Seals are guaranteed for ONE FULL YEAR!The piston rod is self-lubricated by the oilSeries EA and EJ cylinders provide substantialimpregnated rod bearing during operation.reductions in impact noise, which reduces overallLubrication between piston and cylinder barrel is machine noise and helps meet government regulations.derived from the polishing qualities of theSummary of Sound Levels in Decibelsreinforced Teflon wear ring.The low friction surfaces extend the life of theseals beyond normal expectations.Series EA and EJ cylinders are NFPAinterchangeable and are available in manydifferent mounting styles.J133B35" x 6"95 End PSI Side 10873113741138511081113851108150 End PSI Side EJ155B35" x 6"J1133A32" x 6"3Series EA and EJ cylinders have a impactdampening piston seal that accomplishes 80%of the actual load stopping. The air cushionaccounts for only 20%. (A conventional aircushioning cylinder depends 100% on thecompressibility of air to do the stopping.) TheEcology seal absorbs high impact loadsallowing the effect of the air cushion to bereduced by using a larger air cushion bleedorifice. As a result the piston can move at afaster speed for a longer period of time beforethe Ecology seal does the final stopping.EA155B35" x 6"A1133A32" x 6"EA
NFPA Aluminum & Steel Cylinders NFPA Series A Aluminum & J Steel Cylinders 1-1/2 to 12 inch bore size Ultra Cushion Seals:Advanced design features a unique, one-piece, compound seal of nitrile* captured within a precision machined groove. Linear and radial “float” of the cushion seals eliminates misalignment. Ultra Cushions provide exceptionally fast “out of cushion” stroke reversal .
