Transcription
Floor Marking BestPractices to Maximize5S Success 2020 David Visco All rights reserved.
Agenda Where floor marking falls in the 5S processCommon ApplicationsHow to improve safety with floor marking guidelinesSocial Distancing considerationsTips for choosing the right tape for your environmentInstallation TipsOSHA GuidelinesQ&A 2020 David Visco All rights reserved.
5SPHASESMove out what’s needed.Where floormarking fallsin the 5SprocessEverything in its proper placeSORTSET INORDERSUSTAIN IT A HABITMAKENon-compliance is obvious.STANDARDIZEUse cleaning as inspectionSHINE
First thingsfirst:You need to have colorstandards 2020 David Visco All rights reserved.
There are many options available The 5S Team should determinewhich tapes and floor markingsolutions are going to be usedNext, setstandards formaterials Set the standard across the plant Create a standardized 5SMaterials worksheet that isshared on the company shareddrive Set up a 5S Materials Kanbanprogram to make sure younever run out 2020 David Visco All rights reserved.
Walkwayapplications 2020 David Visco All rights reserved.
Incomingmaterial 2020 David Visco All rights reserved.
Dangerousintersections 2020 David Visco All rights reserved.
Alternativesolution – LEDSignProjectors 2020 David Visco All rights reserved.
Floor Markingfor Safety 2020 David Visco All rights reserved.
Walgreen’s example – a little confusingSocialdistancing forCOVID-19 2020 David Visco All rights reserved.
The markings need to be clear and conciseBest Practice:socialdistancingfloor marking 2020 David Visco All rights reserved.
Common problem is that floor tape and markers don’t always holdup Often problems are a function of product selected and/orinstallationGetting tapeto stick Most people don’t choose the right tape and/or install itincorrectly 4 Steps to Tape Installation Success1.2.3.4.Choose the right tape – go here and download the Tape SelectionMatrix (see slide 14)Clean the floorDry the floorTamp the tape – apply excessive weight in the direction the tapewas laid 2020 David Visco All rights reserved.
Choosing theright tape 2020 David Visco All rights reserved.
Surprisingly, there are no floormarking guidelines from OSHAOSHA They do however requireaccessibility to the front ofelectrical panels to have aminimum of 3 feet of clearanceand a minimum width to be thewidth of the equipment or 2.5feet, whichever is greater Aisles need to be at least 3 feetin width 2020 David Visco All rights reserved.
QUESTIONS 2020 David Visco All rights reserved.
Book: 5S Made Easy Free online 5S best practices: 5S BlackboardKeep in Touch@dvisco@The-5s-store@The5SStore Reach out to me: David Visco David.Visco@the5sstore.com (978)842-4610 5S Supplies: www.the5sstore.com@the 5s store@The5SStore
Next, set standards for materials There are many options available The 5S Team should determine which tapes and floor marking solutions are going to be used
