Flir A300 / A310

Transcription

FLIR A300 / A310Hotspot detection: the thermaleye that never sleepsFixed mounted thermal imaging cameras like FLIR A300/A310 can be installed almost anywhere to monitor yourcritical equipment and other valuable assets. It willsafeguard your plant and measure temperature differencesto assess the criticality of the situation. This allows youto see problems before they become costly failures,preventing downtime and enhancing worker safety.Built-in extensive analysis functions(only FLIR A310)Spot, area measurement and differencetemperature functions.ALARMSEthernet/IPModbus TCPBuilt-in alarm functions (only FLIR A310)As function of analysis, internal temperature ordigital input.25 HIGHSENSITIVITY 50 mKRemote controlRemote control of the camera over the Web andTCP/IP protocol.Messaging functionality (only FLIR A310)The camera automatically sends analysis results,IR images and more as an e-mail on scheduleor at alarm. Autonomous dispatch of files ore-mails, acting as an FTP- or SMTP-client.16 bit image16 bit radiometric image streaming to PC foranalysis.Image masking functionality(only FLIR A310)Select only the relevant part of the image foryour analysis.PoEDIGITALHigh sensitivity 50 mK 50 mK thermal sensitivity captures the finestimage details and temperature differenceinformation.Ethernet/IP and Modbus TCP compliance(only FLIR A310)Easy sharing of analysis, alarm results to PLC's.16bit100MbETHERNETMPEG-4LensBuilt-in 25 degree lens with both motorized focusand autofocus. Optional lenses available.MPEG-4 streamed videoMPEG-4 streamed video output over Ethernet toshow live images on a PC, 640x480 with overlayup to 30 Hz, system dependent.PoE (Power over Ethernet)Communication and power supplied with onlyone cable.Digital inputs/outputs (only FLIR A310)For alarms and control of external equipment.Video outputComposite video output, PAL and NTSCcompatible.IP66Built-in 100 Mb Ethernet connection100 Mb Ethernet.FLIR A300f / A310fThe FLIR A300 / A310 can be ordered in anenvironmental housing. The housing increasesthe environmental specifications of the FLIRA300 / A310 to IP66, without effecting anyof the camera features. It is ideal when thecamera needs to be installed in dusty or wetenvironments. The housing is available for A300cameras that are equipped with a 25º or 45º lensand A310 cameras that are equipped with a 25º,45º or 90º lens.Users that want to build in the camera in thehousing themselves or that already have a FLIRA300 or A310 that needs to be extra protectedagainst dust and water can order the housingseparately as an accessory.

Digital photo and thermal image of a substation showing a transformer with excessivetemperature.Thermal imaging offers another pair of “eyes”to see through the steam into the log vat forproper log alignment.Operators cannot see through the steamcloud caused by condensation in cooler airtemperatures.Who will benefit from thistechnology?Oil and GasOil refineries and exploration,petrochemical plants: Rugged aluminium housingEasy mounting on three sides Natural gas processing, transportand storageFire prevention in storage areasRefractory lining monitoringFlare detectionProcess quality controlPower Generation and DistributionGermanium lens Composite video outputEthernet connectionPower connectionDigital input/output connection Fire prevention on coal pilesFire prevention in wood storageareasFire prevention in waste storageareasSub-station monitoringCritical equipment monitoringFLIR A300 / FLIR A310 housing optionsA300 f / A310 fThe FLIR A300 f and A310 f are thermal imagingcameras with an environmental housing protectingthe A300 or A310 against dust and water. The housingincreases the environmental specifications of theFLIR A300 / A310 to IP66, without affecting any of thecamera features.FLIR A310 ptThe FLIR A310 pt pan/tilt has all the necessary features andfunctions to build single- or multi-camera solutions. The FLIRA310pt can pan /- 360º continuous and tilt /- 45º. It is ideal tocover large areas. Typical application examples are coal pile,waste bunker and sub-station monitoring, utilizing standardEthernet hardware and software protocols.The FLIR A310 pt is a multi-sensor and includes a lowlight36x zoom color CCD camera.

FLIR A300 / A310Technical specificationsCamera specificFLIR A300FLIR A310Measurement analysisSpotmeterAreaIsothermMeasurement optionN/AN/AN/AN/ADifference temperatureN/AReference temperatureN/AAtmospheric transmission correctionN/AOptics transmission correctionEmissivity correctionReflected apparent temperature correctionExternal optics/windows correctionN/AN/AN/AN/AMeasurement correctionsN/A1010 boxes with max./min./average/position1 with above/below/intervalMeasurement Mask FilterSchedule response: File sending (ftp), email (SMTP)Delta temperature between measurement functions orreference temperatureManually set or captured from any measurementfunctionAutomatic, based on inputs for distance, atmospherictemperature and relative humidityAutomatic, based on signals from internal sensorsVariable from 0.01 to 1.0Automatic, based on input of reflected temperatureAutomatic, based on input of optics/windowtransmission and temperatureGlobal and individual object parametersAlarmAlarm functionsN/AAlarm outputN/AEthernetEthernetEthernet, protocols6 automatic alarms on any selected measurementfunction, Digital In, Camera temperature, timerDigital Out, log, store image, file sending (ftp), email(SMTP), notificationControl and imageTCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP, ftp,SMTP, SMB (CIFS), DHCP, MDNS (Bonjour), uPnPEthernet, image streaming16-bit 320 x 240 pixels at 3 Hz- RadiometricControl, result and imageEthernet/IP, Modbus TCP, TCP, UDP, SNTP, RTSP, RTP,HTTP, ICMP, IGMP, ftp, SMTP, SMB (CIFS), DHCP,MDNS (Bonjour), uPnP16-bit 320 x 240 pixels at 7-8 Hz-RadiometricFLIR A300 / A310 - StandardFLIR A300 f / A310 f - Environmental housing FLIR A310 pt - Pan/tilt–15 C to 50 CIP 40 (IEC 60529)25 g (IEC 60068-2-29)–25 C to 50 CIP 66 (IEC 60529)5 g, 11 ms (IEC 60068-2-27)–25 C to 50 CIP 66 (IEC 60529)5 g, 11 ms, (IEC 60068-2-27)0.7 kg170 70 70 mmUNC ¼”-20 (on three sides)2 M4 thread mounting holes (on threesides)5 kg460 140 159 mmN/ATBA17.9 kg460 x 467 x 326 mmN/ATBASystem featuresAutomatic heatersN/AClears ice from windowClears ice from windowPan/tiltAzimuth rangeElevation rangeProgrammable presetsN/AN/AN/AN/AN/AN/AAz velocity 360º continuous, 0.1 to 60º/sec max.El velocity /- 45º, 0.1 to 30º/sec. max.128Ethernet video streamingEthernet, video streamingMPEG-4, ISO/IEC 14496-1 MPEG-4 ASP@L5MPEG-4, ISO/IEC 14496-1 MPEG-4 ASP@L5Two independent channels for each camera-MPEG-4, H.264 or M-JPEG12/24 VDC (10-30 VDC), 24 W absolute max12/24 VDC (10-30 VDC), 24 W absolute max 24 VAC (21-30 VAC) 24 VDC (21-30 VDC)24 VAC: 215 VA max w/heater24 VDC: 195 W max w/heaterEnvironmental dataOperating temperature rangeEncapsulationBumpPhysical dataWeightCamera size (L W H)Tripod mountingBase mountingPower systemExternal power operationConsumption

GeneralImaging and optical dataField of view (FOV) / Minimum focus distanceLens identificationThermal sensitivity/NETDFocusF-numberImage frequencyZoom25 18.8 / 0.4 mAutomatic 0.05 C at 30 C / 50 mKAutomatic or manual (built in motor)1.330 Hz1–8 continuous, digital, interpolating zooming on imagesDetector dataIR resolutionDetector pitchDetector time constantFocal Plane Array (FPA) / Spectral range320 240 pixels25 μmTypical 12 msUncooled microbolometer / 7.5–13 μmMeasurementObject temperature rangeAccuracy–20 to 120 C0 to 350 C 2 C or 2% of readingSet-upColor palettesSet-up commandsColor palettes (BW, BW inv, Iron, Rain)Date/time, Temperature CStorage of imagesImage storage typeFile formatsBuilt-in memory for image storageStandard JPEG, 16-bit measurement data includedComposite videoVideoVideo, standardComposite video output, PAL and NTSC compatibleCVBS (ITU-R-BT.470 PAL/SMPTE 170M NTSC)Digital input/outputDigital inputDigital output, purposeDigital outputDigital I/O, isolation voltageDigital I/O, supply voltageDigital I/O, connector typeDigital input, purpose2 opto-isolated, 10–30 VDCAs function of ALARM, Output to ext. device(programmatically set)2 opto-isolated, 10–30 VDC, max 100 mA500 VRMS12/24 VDC, max 200 mA6-pole jackable screw terminalImage tag (start/stop/general), Input ext. device (programmatically read)EthernetEthernet, standardEthernet, connector typeEthernet, typeEthernet, communicationEthernet, powerIEEE 802.3RJ-45100 MbpsTCP/IP socket-based FLIR proprietaryPower over Ethernet, PoE IEEE 802.3af class 0Environmental dataStorage temperature rangeHumidity (operating and storage)Vibration–40 C to 70 CIEC 60068-2-30/24 h 95% relative humidity 25 C to 40 C EN 61000-6-2:2001 (Immunity) EN 61000-6-3:2001 (Emission) FCC 47 CFR Part 15 Class B (Emission)2 g (IEC 60068-2-6)Physical dataHousing materialAluminiumEMCScope of deliveryHard transport case or cardboard box, thermal imaging camera with lens, utility CD-ROM, calibration certificate, Ethernet cable, mainscable, power cable (pig-tailed), power supply, user documentation CD-ROM, printed documentation, 6-pole screw terminal (mounted oncamera)

FLIR A300 / A310 / A315AccessoriesLensesIR lens f 76 mm, 6 incl. case and mounting[T197407]For maximum magnification, the 6 lens is the only choice. This optic providesalmost 3.5X magnification compared to the 25 lens.IR lens f 30 mm, 15 incl. case[1196961]When the target in question is a distance away it may be useful to use atelescope lens. The 15 lens is a popular lens accessory and provides almost 2Xmagnification compared to the 25 lens. Ideal for small or distant targets.IR lens f 10 mm, 45 incl. case[1196960]Sometimes there isn’t enough room to step back and see the whole picture. Thiswide angle lens has a field of view almost double than the one of the standard 25 lens. Perfect for wide or tall targets.IR lens f 4 mm, 90 incl. case and mounting support[T197411]This wide angle lens has a field of view almost four times the one of the standard25 lens.Close-up 1 (25 µm) incl. case and mounting support[T197415]This macro lens provides resolution of extremely small targets.Not suitable for thermal imaging cameras in an environmental housing.Close-up lens 2x, 50 µm, incl. case[T197214]This macro lens provides resolution of extremely small targets.Not suitable for thermal imaging cameras in an environmental housing.Close-up lens 4x, 100 µm, incl. case[T197215]This macro lens provides resolution of extremely small targets.Not suitable for thermal imaging cameras in an environmental housing.Extended measurement rangesHigh temperature option to 1200 CAllow to measure temperatures of up to 1200 C with the camera.[T197000]Power supplyPower supply incl. multi-plugs.[T910922]PowerEthernet cable CAT-6, 2m[T951004]This cable is used to connect the thermal imaging camera to Ethernet.Power cable, pigtailed[1910586]This cable is used, when a separate power supply is used (not the one suppliedwith the camera).Video cable (only FLIR A300/A310)[908929]Video cable 3 m.TransportHard transport caseRugged watertight plastic shipping case. Holds all items securely.[T197871]Delivery BoxCardboard delivery box with plastic handle. Holds all items neatly.[T197870]

Environmental housingFixed housing for A3xx with 6º / 15º lensProtects the A300 / A310 / A315 against dust and water.Suited for A3xx thermal imaging cameras with a 6º or 15º lens.[61301-0001]Fixed housing for A3xx with 25º / 45º / 90º lens[61301-0002]Protects the A300 / A310 / A315 against dust and water.Suited for A3xx thermal imaging cameras with a 25º, 45º or 90º lens.Environmental dataTemperature rangeStorage temperature rangeHumidityEMCEncapsulationBumpVibration-25 ºC to 50 ºC-40 ºC to 70 ºCIEC 60068-2-30/24 h 95% relative humidity 25 ºC to 40 ºC EN 61000-6-2:2001 (Immunity) EN 61000-6-3:2001 (Emission) FCC 47 CFR Part 15 Class B (Emission)IP 66 (IEC 60529)5 g, 11 ms, (IEC 60068-2-27)2 g (IEC 60068-2-6)Physical dataWeightCamera size (L W H)Tripod mountingBase mountingHousing material5.0 kg (8.8 lb.)460 140 159 mm (18.1 5.5 5.9 in.)N/ATBAAluminumPower system heaterExternal power operationExternal power, connector typeVoltage24 VDC (21-30 VDC)24 VDC: 25 W max w/heater2-pole jackable screw terminalAllowed range 21–30 VDCSystem featuresAutomatic heatersClears ice from windowFLIR A300 f / A310 f / A315 fAccessoriesPedestal mount[500-0463-00]Mount to install an A3xx f-Series network-ready fixed mount thermal imagingcamera. Typically used on a flat horizontal surface such as a wall or the top of apole.Wall mount[500-0462-00]Mount to install an A3xx f-Series network-ready fixed mount thermal imagingcamera against a wall.Pole mount adapter[4119507]Can be used to mount an A3xx f-Series network-ready thermal imaging cameraagainst a new or existing pole.Power supply[206-0004-01]Power supply to power an A3xx f-Series or an A310 pt network-ready thermalimaging camera.

FLIR A310ptAccessoriesPedestal mount[500-0461-00]Mount to install an A310pt network-ready fixed mount thermal imaging camera.Typically used on a flat horizontal surface such as a wall or the top of a pole.Wall mount[500-0460-00]Mount to install an A310pt network-ready fixed mount thermal imaging cameraagainst a wall.Pole mount adapter[4119498]Can be used to mount an A310pt network-ready thermal imaging cameraagainst a new or existing pole.Adapter plate[4119468]Can be used to mount an A310pt network-ready Multi-Sensor to a wide varietyof existing mounts.Power supply[206-0004-01]Power supply to power an A310pt or an A3xxf-Series network-ready thermalimaging camera.

FLIR A300 / A310 to IP66, without affecting any of the camera features. FLIR A310 pt The FLIR A310 pt pan/tilt has all the necessary features and functions to build single- or multi-camera solutions. The FLIR A310pt can pan /- 360º continuous and tilt /- 45º. It is ideal to cover large areas. Typical application examples are coal pile,