WIXLIB

JOYSTICKST-JS0418TSTS seriesProportional miniature thumb controls non-contacting Hall effect technologyDISTINCTIVE FEATURESOne or two axisAnalog, PWM or USB outputsIP67 Above panel sealing mountingRear or drop-in mountingPushbutton optionENVIRONMENTAL SPECIFICATIONS Operating Temperature: -40 C to 85 C (-40 F to 185 F) Storage Temperature: -40 C to 85 C (-40 F to 185 F) Above Panel Sealing: IP67, IP69K1 (subject to mounting style & finalspecifications) EMC Immunity Level: EN61000-4-3 EMC Emissions Level: EN61000-6-3:2001 ESD: EN61000-4-2SENSOR SPECIFICATIONS Technology: Hall effect sensors, single or dual Supply Voltage Range: 5.00 V 0.01 VDC Supply Current: 11 mA max Ratiometric Output Options: See options Reverse Polarity max: -10 V Transient overvoltage max: 16 V Start-up time: 15 ms max Output Impedance: 2Ω Return to Center Voltage Tolerance: 200 mV initialThe company reserves the right to change specifications without notice.1

JOYSTICKSTS seriesProportional miniature thumb controls non-contacting Hall effect technologyMECHANICAL SPECIFICATIONS Operating Force: 3.1 N 0.5 N (0.70 lbf 0.11 lbf)2 Maximum Vertical Load: 200 N (45 lbf)2 Maximum Horizontal Load: 150 N (33.7 lbf)2 Mechanical Angle of Movement: 50 X & Y axis (subject tolimiter plate) Expected Life: 1 million cycles Mass/Weight: 18.25 g 5.0 g (0.64 oz 0.18 oz) Lever Action (centering): Spring ll options are IP68 and IP69K rated, however drop-in mounting does not preventApanel ingress.2Force applied to the top of the castle cap.1 Threaded Housing: Black oxide plated brass Boot: Silicone Terminal: Brass with silver plating Contact Resistance: 100 mΩ max Insulation Resistance: 100 MΩ min. 500 VDC Dielectric Strength: 250 VAC /1 minute Contact Arrangement: 1 pole 1 throw Stop Strength: Max 3 kgf vertical static load for 15seconds Vibration Resistance: MIL-STD-202F METHOD201A Shock Resistance: MIL-STD-202F METHOD 213B Handles:1, 2, 3, E, F, G - Glass filled nylon4, 5, 6, 7, 8 - SiliconeB, C, D - Thermoplastic elastomerH - PolycarbonateLED SPECIFICATIONS(OPTION H HANDLE)APEM products may be recycled at end-of-life for the re-claiming of valuable metalcomponents.CONNECTIONSWIRING SPECIFICATION(Termination options 1 & 2)2 Rating: 50 mA, 12 VDC. Storage Temperature: -30 C to 85 C(-22 F to 158 F) Body: Glass filled nylon2 Electrical Life: 100,000 cycles Operating Temperature: -25 C to 70 C(-4 F to 158 F)MATERIALS1PUSHBUTTON SWITCHSPECIFICATIONS(OPTION 6 HANDLE)BlackGround & button common,or LED commonRedPower (5 V)1BlueX axis output (alpha)YellowY axis output (alpha)OrangePushbutton switch (option 6 handle)or LED supply (option H handle) 2 2Blue/White StripeX axis output (beta)Yellow/Black StripeY axis output (beta)Red/White StripePower (5 V) (beta)Black/White StripeGround (beta) all sensor and LED supply (LED control option 1)HUser controllable (LED control option 2)LED CONTROLOPERATING VOLTAGEOPERATING CURRENT1 – ON, driven byjoystick supplyvoltage-6 mA2 – Usercontrolled5V6 mA

Proportional miniature thumb controls non-contacting Hall effect technologyJOYSTICKSTS seriesNEW OPTIONS AVAILABLEPLASTIC THREADED HOUSINGLED ILLUMINATION OPTION H HANDLEMOUNTINGPLASTIC HOUSING - REAR MOUNT OPTION CUTOUTPLASTIC HOUSING - REAR MOUNT OPTION CUTOUTPLASTIC HOUSING - DROP-IN PLASTICCUTOUT HOUSING - DROP-IN OPTION CUTOUT DIMENSIONSØ25.65(1.01)Ø2.87(0.113)4 x PUSH IN CONNECTORS4 x 1/2 FH SS PHIL SCREWØ25.65(1.01)Ø2.87(0.113)CHAMFEREDFOR #4 FLATHEAD SCREW(4 PLACES)24.64(0.97)24.64(0.97)DROP-INBEZEL1.00 (0.04) x 45ºCHAMFERO-RINGREAR MOUNTBEZEL24.64(0.97)24.64(0.97) The under panel depth for the Drop-inconfiguration is 16.02 mm (0.631 in). The maximum panel thickness for the RearMount configuration is 2.032 mm (0.08 in). Mounting screws can be driven to arecommended torque of 4 lbf.METAL THREADED HOUSING - DROP-IN OPTION CUTOUT DIMENSIONSMETAL THREADED HOUSING - DROP-IN CUTOUTR17.17 x 2(0.063)2X R1.6.06311.94.470PLASTIC THREADED HOUSING - DROP-IN CUTOUTFIG. 5R17.172X 2X R1.6.06311.94(0.470)25.02.985(NUT25.020.985) The under panel depth for the Metal ThreadedHousing configuration is 14.55 mm (0.573 in). The under panel depth for the Plastic ThreadedHousing configuration is 14.55 mm (0.573 in). Mounting nut can be tightened to arecommended torque of 10 lbf. Mounting nut can be tightened to arecommended torque of 10 lbf.3

JOYSTICKSTS seriesProportional miniature thumb controls non-contacting Hall effect technologyBUILD YOUR PART NUMBERTSMOUNTING OPTIONSSERIESLIMITERTERMINATION2NNone122 AWG 25 cm PTFE 2-1USingle axisDDrop-in228 AWG 25 cm PTFE2-2SSquareRRear mount3GGuided feelADrop-in and Rear Mount72” Overmold Cable withUSB Male Type ConnectorPlusThreaded housing, Metal2.54 mm (0.100”)Pitch TE ConnectorPT4PThreaded housing, Plastic52.54 mm (0.100”)Pitch TE Connector with10” Mating HarnessHANDLE10None6Pushbutton1DConical, elastomer1Castle7Mushroom1EQuadcave2Winged Hat8Low Profile1FPuck3ConicalAHandles 1, 2, 3GRoller4Finger TipBCastle, elastomerH5Round JogCWinged Hat,elastomerCastle, LEDilluminationLED CONTROLOUTPUT OPTIONS 4000 V to 5 V010.25 V to 4.75 V020.5 V to 4.5 V031 V to 4 V0405BLANK060.5 V to 4.5 V - Sensor 10.5 V to 4.5 V - Sensor 2111 V to 4 V - Sensor 14 V to 1 V - Sensor 2071 V to 4 V - Sensor 11 V to 4 V - Sensor 212Customer specified080 V to 5 V - Sensor 15 V to 0 V - Sensor 213PWM 30 V to 5 V - Sensor 10 V to 5 V - Sensor 214USB (Game Controller)090.5 V to 4.5 V - Sensor 14.5 V to 0.5 V - Sensor 2150.25 V to 4.75 V - Sensor 10.25 V to 4.75 V - Sensor 2Joyball (Cursoremulation)100.25 V to 4.75 V - Sensor 14.75 V to 0.25 V - Sensor 21ON, driven by joysticksupply voltage 62User controlled 7POWER SUPPLY OPTIONSASingleBIndependent Pushbutton, Mushroom and Low profile handle not available with T (threaded housing, metal)or P (threaded housing, plastic),2-1Wires are thick, robust, and best suited for stand alone applications.2-2Wires are thin and best suited for tightly constrained wire routing.3Contact factory for PWM configuration.4Output voltage is ratiometric to supply voltage.5Only available on dual output. Not available with Handle 6 (Pushbutton). Not available with termination options 4 or 5.6LED control is driven by joystick supply voltage. Illumination is constantly on7LED requires independent 5V supply. Illumination is user controlled.14No illuminationLED COLORBLANK5No illuminationBBBlueRRRed

JOYSTICKSTS seriesProportional miniature thumb controls non-contacting Hall effect technologyPLASTIC HOUSING17.17(0.676)PIN INDICATES Y DIRECTIONTOP VIEW19.20(0.75)23.00(0.91)33.27(1.31)10.00 - 13.00(0.40 - 0.50)25.40(1.00)29.70(1.17)Top view17.17(0.676)Ø24.89(0.98)METAL THREADED (0.98)10.00 - 13.00(0.40 - 0.50)17.17(0.676)LOCATING FEATURE, Y Ø32.77(1.29)33.12(1.304)10.00 - 13.00(0.40 - 32.7711.81(1.29)(0.465)LOCATING FEATURE, Y 34.841.3710.00 - 13.00(0.40 - 0.50)11.81(0.465)MINIMUM PANEL TH10.1.40Ø32.77(1.29)Top viewLOCATING FEATURE, Y 32.771.29PLASTIC THREADED HOUSING35.561.40LOCATING FLAT, Y 17.16.68Bottom view34.841.37MINIMUM PANEL THICKNESS: .125"10.1.4032.771.29Top view35.561.4017.16.68LOCATING FLAT, Y 34.841.37MINIMUM PANEL T10.1.4032.771.2935.561.40LOCATING FLAT, Y 5

JOYSTICKSTS seriesProportional miniature thumb controls non-contacting Hall effect technologyHANDLE OPTIONSHANDLE OPTIONS1. CASTLEB. CASTLE (ELASTOMER)2. WINGED HATC. WINGED HAT (ELASTOMER)Ø17.17.676(0.676)4. FINGER TIP3. CONICALD. CONICAL 84.781(0.781)1 CastleB Castle (elastomer)20.35.801(0.801)2 Winged hatC Winged hat (elastomer)5. ROUND JOG3 ConicalD Conical (elastomer)6. 5)AREV.DESCRIPTIONA RELEASEINITIAL24.08.948(0.948)4 Fingertip8. LOW PROFILE7. MUSHROOM78ECNDESCRIPTIONDATEECNINITIAL RELEASE11/10/164645 Ø20.32GT 11/10/16.800(0.800)INITIALS .99.787(0.787)DESCRIPTIA20.27.798(0.798)INITIAL RELEA14.88.586(0.586)PIN INDICATES Y DIRECTION5 Round jog6 Pushbutton7 Mushroom8 Low DCAVEE QuadcaveF PuckG RollerH Castle, LED illuminationNAMEUNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN INCHESTOLERANCES:.X .030.XX .010.XXX .005ANGLES 1.XXXX .0005FRACTIONS 1/32AUSB OPTIONSUNLESS OTHERWISE SPECIFIED:DIMENSIONS ARE IN INCHESTOLERANCES:.X .030.XX .010.XXX .005ANGLES 1.XXXX .0005FRACTIONS 1/32USB : GAME CONTROLLER: CRITICAL X/XX/2017ENG. APR.X.XxxxxXX/XX/20173RD ANGLE PROJECTION: CRITICAL DIMENSIONSMATERIALUNLESSOTHERWISE SPECIFIED: DATENAMENAMEDATETHIS DOCUMENT CONTAINS PROPRIETARY INFORMATIONOF APEM, INC. AND IS TENTED SUBJECT TO THECONDITIONS THAT THE INFORMATION (A) BE RETAINED INDIMENSIONS ARE IN INCHESCONFIDENCE (B) NOT BE REPRODUCED OR COPIED INDRAWNTOLERANCES:DRAWN11/10/1611/10/16WHOLE OR PART (C) NOT BE LEASED TO THIRD PARTY AND.X .030MAN-MACHINEINTERFACEPRODUCTS(D) NOT BE8USEDOFORINCORPORATEDIN ANY PRODUCTMANUFACTURERS OF MAN-MACHINE INTERFACE PRODUCTSMANUFACTURERS.XX .010970 PARK CENTER DR. VISTA, CA 92081970 PARK CENTER DR. VISTA, CA 92081EXCEPT UNDER EXPRESSED WRITTEN AGREEMENT WITHTEL:APEM,(760)INC.598-2518 FAX: (760) 598-2524.XXX .005ANGLES 1TEL: (760) 598-2518 FAX: (760) 598-2524CHECKED.XXXX .0005FRACTIONS 1/3211/10/16CHECKED11/10/16----: CRITICAL DIMENSIONSENG APPR.MATERIAL-TITLE:ENG APPR.11/10/16-SIZETHIS DOCUMENT CONTAINS PROPRIETARY INFORMATIONOF APEM, INC. AND IS TENTED SUBJECT TO THECONDITIONS THAT THE INFORMATION (A) BE RETAINED INCONFIDENCE (B) NOT BE REPRODUCED OR COPIED INWHOLE OR PART (C) NOT BE LEASED TO THIRD PARTY AND(D) NOT7BE USED OR INCORPORATED IN ANY PRODUCTEXCEPT UNDER EXPRESSED WRITTEN AGREEMENT WITHAPEM, INC.543USB: JOYBALL (CURSOR EMULATION)TITLE:ACTUATOR, TS, ACTUATOR,QUADCAVETS, QUADCAVE11/10/16FINISHAS MOLDED-FINISHCOMMENTS:AS MOLDEDCOMMENTS:PROJECT/ACCT. NO.PLOTFILE: 7/5/2017DWG. NO.SIZEPROJECT/ACCT. NO.FILE NO.MANUFACTURED Fe atures:- USB 2.0 HID compliant “game controller” device- Easy to install and operate- Functions determined by controlled application Supplied wiring: USB Male Type A Connector with 72”overmolded cable6PLOTFILE: 7/5/2017DWG.NO.REVREVFILE NO.MANUFACTUREDCursor Emulation option is widely used inshipboard and military applications. Fe atures:- HID compliant “pointing device”- Plug-and-play with USB option Supplied wiring: USB Male Type A Connectorwith overmolded cableTITLE:SIZEPROJECT/APLOTFILE: 4FILE NO.SCALE: 1.5FORM NO.: EF-3016MANUFACTURERS OF M970 PARK CENTER DR. VTEL: (760) 598-2518 FABCOMMENTS:FINISHAA5210Featuring USB 2.0 HID compliant interface. AAPEM’s USBThe cursorAemulation option converts a multi-axisA5210ASCALE:1:1DONOTSCALESHEET 1 OF 1FORM NO.: EF-300SCALE: 1:1DO NOT SCALEDRAWINGSHEET1 OF1 DRAWINGFORM NO.: EF-300joysticks are kintoa mouse or cursor control device24312431devices. Adhering to the HID specification, APEM’s USB joysticks Applications: The cursor emulation option isare plug-and-play with most versions of Windows. Joystickideal for vehicle applications subjected to dirtbutton and axis assignments are dependent upon the controlledand high vibration which makes operating aapplication.traditional cursor control device difficult. The-5DATEDRAWN