Transcription
EyewashesG1814PEyewash, Wall Mounted, Plastic BowlApplication: Eyewash for wall mounting. Two GS-Plus spraytype spray heads deliver a flood of water for rinsing eyes.Spray Head Assembly: Two GS-Plus spray heads. Each headhas a “flip top” dust cover, internal flow control and filter toremove impurities from the water flow.Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valveis US-made with chrome plated brass ball and Teflon seals.Bowl: 11-1/2" diameter orange ABS plastic.Mounting: Heavy duty cast aluminum wall bracket withcorrosion resistant powder coated finish.Supply: 1/2" NPT female inlet.Waste: 1-1/4" NPT female outlet.Sign: ANSI-compliant identification sign.Quality Assurance: Unit is completely assembled and watertested prior to shipment.Available OptionsDC Stainless steel dust cover for each spray head.GRN Green ABS plastic bowl.YEL Yellow ABS plastic bowl.HS Auxiliary hand-held drench hose for rinsing eyes, faceor body.SC Self-closing ball valve. Note: Eyewashes with self-closingvalves do not comply with ANSI Z358.1-2014.T Chrome plated brass tailpiece and trap with 1-1/2" IPSwaste connection.TP 1-1/2" OD Chrome plated brass tailpiece.TMV G3600LF thermostatic mixing valve precisely blendshot and cold water to deliver warm (tepid) water asrequired by ANSI Z358.1-2014. Refer to “Tempering Units”section for complete technical and product selectioninformation.
EyewashesG1814PEyewash, Wall Mounted, Plastic Bowl11 3/4"(298mm)(2) GS-PLUS SPRAY HEADS6 1/2"(165mm)POWDER COATED CASTALUMINUM FLAG HANDLEDETAIL AMOUNTING BRACKET4 7/8"3 1/4"(83mm)4 7/8"(124mm)1-1/4" NPTFEMALE OUTLET(3) Ø3/8"MOUNTINGHOLES3 1/4"(83mm)4 5/8"(117mm)8"(203mm)6 1/2"(165mm)ABS PLASTIC BOWL1/2" NPT FEMALE INLETPOWDER COATED CASTALUMINUM WALL BRACKET(SEE DETAIL A)7"(178mm)1/2" IPS CHROME PLATEDBRASS STAY-OPEN BALL VALVE5 1/4"(133mm)this space for architect/engineer approvalDue to continuing product improvement, the information contained in this documentis subject to change without notice. All dimensions are 1/4" (6mm).NOTES:1. EACH GS-PLUS SPRAY HEAD HAS A"FLIP-TOP" DUST COVER, INTERNAL FLOWCONTROL AND FILTER TO REMOVE IMPURITIESFROM THE WATER FLOW.2. UNIT SHOULD BE INSTALLED SO SPRAY HEADSARE 33" TO 45" ABOVE FINISHED FLOOR.Sign Included
Parts ListEyewashes(2 GS-Plus Spray Heads)Item Part 0-008RAP100-011AGDescriptionHOrange ABS Plastic BowlIGreen ABS Plastic BowlYellow ABS Plastic BowlBStainless Steel BowlStn. Stl. Flanged Bowl For Deck MountADrain Plate AssembliesBAP150-012AAP150-012BDrain Plate Assembly for Plastic BowlsDrain Plate Assembly for Stainless BowlsAssemblyDetailNote: Includes Drain Plate, Cupped Washer, And GasketWaste ReceptorsC150-014E-2150-066-2CCast Aluminum Waste Receptor for WallMount UnitsCast Aluminum Waste Receptor forPedestal UnitsHGHGBall Valve -101V-HFCAP600-1041/2”IPS Stay-Open Chrome Plated BrassBall Valve with Flag Handle, Horizontal1/2”IPS Stay-Open Chrome Plated BrassBall Valve with Flag Handle, VerticalCCRecessed DeckMounted1/2”IPS Stay-Open Chrome Plated BrassBall Valve with Flag Handle, for Hand/Foot Control, HorizontalD1/2”IPS Stay-Open Chrome Plated BrassBall Valve with Flag Handle, for Hand/Foot Control, VerticalHG1/2” IPS Brass Stay-Open Ball Valve, PushDown ControlEAP050-010Stainless Steel Foot Treadle and ReturnSpring with Aluminum Clevis PinF150-032Powder Coated Cast Aluminum FloorFlange, 1-1/4” NPT Female ConnectionGAP470-001GS-Plus Spray Head Assy.HAP470-100R(2) GS-Plus Spray Heads with ChromePlated Brass FittingsIBI136-02-043/8” IPS X 2-1/4” Brass ShankCEWallMountedFHGPedestalMountedDSwing DeckMountedD
Parts ListGS-Plus Spray HeadsThis guardian equipment product is equipped withGS-Plus spray heads. Each head features: Tough polypropylene plastic construction Highly visible integrated nylon dust cover Easily accessible 1.8 GPM flow controlA Dense (60 pore per inch) polyurethane filter Unique design provides a consistently soft, full spray of wateracross a range of working pressures from 30 to 100 PSI.ItemABCDPart onGS-Plus Spray Head (assembled)Dust Cover and Cap Assembly60 PPI Polyurethane Filter1.8 GPM Flow ControlBCIMPORTANTIn order to operate properly,the flow control must beinserted into the bodyconcave end first.D
A. EW-7* – Wall mounted eye wash with ABS plastic bowl, ½” U.S. made chrome platedbrass stay open ball valve, powder coated cast aluminum flag handle and wallbracket. Unit shall have (2) polypropylene ‘GS Plus’ spray heads with integral “fliptop” dust covers, filters and 1.8-GPM flow control orifices mounted on a chromeplated brass eyewash assembly. Unit shall include ANSI compliant sign.B. Performance: Unit shall be fully factory assembled and hydrostatically tested to meetor exceed ANSI Z358.1 – 2009, and come with a full 2-year warranty.C. Fixture: Guardian Equipment G1814P
Eyewashes FG1814P Eyewash, Wall Mounted, Plastic Bowl Application: Eyewash for wall mounting. Two GS-Plus spray-type spray heads deliver a flood of water for rinsing eyes. Spray Head Assembly: Two GS-Plus spray heads. Each head has a “
