Transcription
MO D E L AVD-4040AD - 2 0 0 0MODELA u Automatictomatic Vo i c sarmDialerSystemControlled by Any Cell or Landline Phonewith VerificationNot just the next generation it’s the next millennium!Versatile * Full-featured * Easy to Program2-way Listen in VerificationOperates with all alarm systemsIdeal stand-alone dialerProvides reliable emergency notification 24 hours a day
MO D E L AVD-4040AD - 2 0 0 0MODELOwner’s Manual and Operating InstructionsThe Automatic Voice Dialer SystemFor The Next MillenniumCongratulations!Thank you for purchasing United Security Product’s Model AVD-4040 - the “smartest”, most comprehensiveautomatic voice dialer available. Representing an exciting new level of achievement, the AVD-4040 combinestechnologically advanced features, ease of programming, and reliable operation in a compact unobtrusive dialerthat is completely compatible with any security alarm system. Installation and hookup is quick and easywhether installed with normally open, or normally closed dry contact or voltage activation sensors. The unit canalso function as a stand-alone device by simple connection to an ordinary telephone jack. The keypad coverglides on and off for added security.How It WorksThe AVD-4040 features a “smart’ Remote Responder System (RRS) that is always ready to use in response to themonitoring, dialing, and voice message features of this extraordinary product.If an immediate response is required, the AVD-4040 maybe used to Remotely Verify the status of assigned circuits(open or closed) and also Remotely Control those circuits(close or open) using the keypad on any phone. Refer toRemote Responder System, pages 13, 14, and 15, for complete operational details including Remote Arming or Disarming of monitored channels.The AVD-4040 is extensively programmable, offering personalized customization to fulfill virtually any residential orbusiness requirement. Plain-English prompts walk the userthrough the process in a timely manner.Programming options abound, allowing the user to: Store up to 8 phone numbers. Choose 1- 9 calling efforts for the numbers dialed. Select 1-3 message repeats. Record a variable combination (maximum: 7) of instructional outgoing messages (total elapsed time: 60seconds).Program up to 4 separate input channels with individuallyenable/disable, entry/exit delay and activation options (Normally Open (N.O.), Normally Closed (N.C.) (dry contact orvoltage activation) including momentary and continuous activation for each).Further individualize each channel by selecting the delaytimes, landline or cell phone numbers to be dialed, and thespecific outgoing messages to be played.Please Familiarize Yourself With All Instructions Before Installation/Operation. This guide describes how to programand operate the dialer. We strongly recommend that you readthe all instructional material before attempting to use the unit.To enhance ease of programming and operation, this guideincludes: A Programming Sample/Quick Setup review on page 16with a corresponding Program Planner. A Blank Program Planner on page 17. One copy of thisPlanner should be kept in a safe place by the end user.A separate copy should also be retained by the installer.We are happy to provide a full measure of security reassurance and peace of mind with the Model AVD-4040. For information about other innovative United Security Productsequipment, call (800) 227-1592.For Technical Service and Support: Call (858) 413-0149 * Fax (858) 413-0124E-mail: usp@unitedsecurity.comMonday – Friday * 6:30 AM – 4:00 PM PST2
THIS PACKAGE CONTAINS:1 ea. MODEL AVD-40401 ea. AC-2P AC ADAPTER1 ea. PHONE CABLE1 ea. INSTRUCTION MANUAL4 ea. 1K RESISTORST AB L E O F C O N T E N T SSectionPage numberPackage contents 3Panel Displays 4Installation Hookups: Alarm Panel .5Installation Hookups: Stand Alone 6Programming the Dialer .7-11Overview 7Programming Phone/Numeric Pager Numbers .8Programming Auxiliary Information .9Programming/Recording OGMs 10Programming Channels .10-11Testing Your System .11Operating Your System .12Remote Responder System .13Remote Responder System (cont’d) .14Remote Responder System (cont’d) .15Sample Program Planner 16Blank Program Planner .17Specifications .18Dialer Accessories .18Important Information 19IMPORTANTAVD-4040 PERFORMS BEST WHEN CONNECTED TO AN ANALOG “LANDLINE.” DIGITAL CONVERSION OF ANALOG VOICE IN TELEPHONE LINESMAY RESULT IN A SLIGHT DELAY OF SIGNAL RECEIVED. IF AVD-4040 ISCONNECTED TO A DIGITAL PHONE LINE, IT MAY BE NECESSARY TOREPEAT SAYING “HELLO” IN ORDER TO RELEASE THE PRE-RECORDEDMESSAGE.3
A V D - 4 0 4 0 P AN E L D I S P L AY SAVD-40404
AVD-4040 INSTALLATION HOOKUPS5
AVD-4040 INSTALLATION HOOKUPS6
P R O G R AM M I N G T H E D I AL E ROverviewPlease study this section thoroughly before beginning to program the dialer, referring to the Sample ProgramPlanner on page 16. Then, select from among the options for each feature, listing each choice in pencil on theblank Program Planner on page 17. Once the dialer is correctly programmed, list each choice in ink. One copyof the Planner should be kept by the installer; one copy should remain with the end user.A Look At The Keypad CALLOUT FOR NUMERALS:Press these keys to enter telephone numbers and other programming information asspecified in this manual. A maximum of 50 digits can be input in each landlinephone, cell phone, or pager location.CALLOUT FOR P:Press this key to program in a pause. Each “P” provides a 2-second pause.CALLOUT FOR R:Press this key to record the combination of identification and directional outgoingmessages (OGMs). The total elapsed OGM time cannot exceed 60 seconds.CALLOUT FOR M:Press this key to change the Mode of the dialer, in sequence:PROGRAM TEST OPERATE OFF.Once the unit has been programmed, removing power or placing the dialer in the OFF mode will not affect theprogramming.7
P R O G R AM M I N G T H E D I AL E RFirst Time Installation to Initialize Dialer Follow Steps 1 & 2.STEP 1Apply power to the unit.The LCD will read:NOT PROGRAMMEDPRESS KEYPAD #1STEP 2Press 1.The LCD will change to read:UNITED SECURITY PRODUCTS, INC.then: PROGRAM: NUMBERSthen: SELECT: 1-80(DONE)Programming Landline Phone, Cell Phone, or Pager NumbersYou are now ready to begin programming the dialer. Allprogramming can be input before connecting the dialer to atelephone line. Check the unit’s LCD as you program numbersin the dialer to ensure accuracy. Please complete allprogramming instructions before attempting to operate the unit.Press “*” to store the sequence.Example: To store numeric pager number 555-1212, a 4-secondPause and code 3456:Press:Before programming your dialer to call the police, firedepartment or 9-1-1 directly, you must check with theseagencies for their approval.STEP 3B – TELEPHONE NUMBERSIf you pressed “2” and wish to program in a telephone number Press the digits of the number to be dialed. For long-distancenumbers, first press “1” followed by the area code and then thenumber. The number will appear on the LCD.Press “*” to store the sequence.Example: Store telephone number 1-800-555-1212:Press:A maximum of 50 digits (including pauses) can be programmedin at each location.*PROGRAM: NUMBERSSELECT: 1-81(YES) 2(NO )0(DONE)*This prompt will appear after a number has been programmed and this section has been exited.REMEMBER/NOTE: Before programming your dialer to call the police, firedepartment 0r 9-1-1 directly, you must check with these agencies for theirapproval.STEP 1 Press location number 1-8 to program the firstnumber. This can be any location 1-8. You do not have toprogram locations in sequence. For example, you can programnumbers in locations 3 and 5. When you are doneprogramming all the desired phone and/or pager numbers,press “O” to exit this section.The LCD will read:PAGER1(YES) 2(NO)STEP 2 Press “1” if you wish to program in a numeric pagernumber (step 3A). Press “2” if you wish to program in atelephone number (step 3B), cellular phone number (step 3B), ora voice pager (step 3C).STEP 3C – VOICE PAGERSIf you pressed “2” and wish to program in a voice pager Press the digits of the pager to be called.Press “P” one or more times in accordance with the number ofseconds needed to accommodate the pager.(Remember each “P” provides a 2-second pause).Press “*” to store the sequence. The number will appear on theLCD.Example: To store voice pager 555-1212 and a 4-second pause:Press:STEP 3A- NUMERIC PAGERSNOTE: WHEN PROGRAMMING NUMERIC PAGERS, YOU MUSTPROGRAM IN ONE OR MORE PAUSES. EACH “P” PROVIDES A 2SECOND PAUSE. BEFORE PROGRAMMING IN A PAGER, CALL THENUMBER TO DETERMINE THE NUMBER OF 2-SECOND PAUSES TO BEPROGRAMMED IN.STEP 4 Repeat steps 1-3 for each number to be programmed ineach location. Select any of 8 location numbers in Step 1(SELECT: 1-8) for each number to be programmed.If you pressed “1” to program in a numeric pager Press the digits of the pager to be called. The numbers willappear on the LCD, as will the following key designations.Press “P” one or more times in accordance with the number ofseconds needed to accommodate the pager.(Remember, each “P” provides a 2-second pause).Press the digits of the numeric pager code.STEP 5 When you are done programming all desiredtelephone and/or pager numbers, press “0” to exit thissection.NOTE: IF YOU ENTER THE WRONG CHOICE, PRESS “M” KEYREPEATEDLY AND RETURN TO THE “PROGRAM MODE”, THENSELECT THE SECTION TO CHANGE (“1” ACCEPT SECTION, “2”FOR NEXT SECTION), THEN ENTER CORRECT INFORMATION.NOTE: SOME PAGER SERVICES REQUIRE A “#” SIGN FORSEPARATION OF THE NUMERIC CODE OR AT THE END OF THENUMERIC CODE FOR PROPER TRANSMISSION.8
P R O G R AM M I N G T H E D I AL E RProgramming Auxiliary InformationThe dialer is preset at the factory to typical telephone line (TLINE), PBX, Dialing Attempts and Message Repeat options. Ifyou choose to accept the following default prompts, simplypress “2” to scroll to the next section. If your landline phonesystem requires dialing a digit to get an outside line or dialtone, similar to PBX, then turn PBX on and enter digit toprogram.Structuring Your Outgoing MessagesThe AVD-4040 dialer was designed with optimum versatility andfunctionality in mind. Nowhere is this more apparent than in thematrix of outgoing messages (OGMs). The user’s ability to “mixand match” OGMs allows complete system customization andprovides ultimate efficiency.Total OGM time is 60 seconds.PRESETST-LINE .TONEPBX .OFFATTEMPTS .2MESSAGE .2To change the presets, follow these steps.A beginning identification (ID) message of up to 15 seconds canbe programmed in (options #4, #6, and #8). Your ID messageshould clearly state your name, address and other pertinentemergency information.Typically, each OGM will have a specific purpose. For instance,OGM 1 can alert the person notified to contact the fire departmentwhile OGM 2 can alert the person to contact the policedepartment. Typically the dialer is programmed to notify family,friends or another responsible party. Before programming yourdialer to call the police, fire department or 9-1-1 directly, you mustcheck with these agencies for their approval.T-LINEThe LCD will display:PROGRAM: T-LINE1(YES) 2(NO)Press “1” to program T-LINE.Press “2” to scroll to the next section.The LCD will display:PROGRAM: T-LINE1(TONE) 2(PULSE)Press “1” for TONE. Press “2” for PULSE.PBXThe LCD will display:OPTION #1OPTION #2PROGRAM: PBX1(ON) 2(OFF)OPTION #3Step 1: Press “1” for ON. Press “2” for OFF.Step 2: If “1” is entered, the LCD will display:PROGRAM: PBXENTER PBX NUMBEREnter PBX number (1 digit).OPTION #4OPTION #5ATTEMPTSATTEMPTS refers to the number of times the dialer will calleach designated number. Both successful and unsuccessful(busy or no answer) call are considered attempts.OPTION #6The LCD will display:PROGRAM: ATTEMPTSENTER 1-9Step 1: Press the digit (1-9) corresponding to the number oftimes you wish the dialer to call each number.OPTION #7OPTION #8MESSAGEMESSAGE refers to the number of times each message will bedelivered to each designated number.The LCD will display:PROGRAM: MESSAGEREPEAT ENTER 1-3Step 1: Press the digits (1-3) corresponding to the number oftimes you wish the message(s) to be delivered.No OGM. Select this option if you do not wish torecord any outgoing messages.1 OGM. Select this option if you wish to recordone OGM, which may be as long as 51 seconds.2 OGMs. Select this option if you wish to recordtwo OGMs, each of which may be as long as 25.5seconds.ID plus 2 OGMs. Select this option if you wish torecord one ID of up to 15 seconds in length, andtwo OGMs, each of which may be as long as 18seconds.*3 OGMs. Select this option if you wish to recordthree OGMs, each of which may be as long as 17seconds.ID plus 3 OGMs. Select this option if you wish torecord one ID of up to 15 seconds in length, andthree OGMs, each of which may be as long as 12seconds.*4 OGMs. Select this option if you wish to recordfour OGMs, each of which may be as long as12.75 seconds.ID plus 4 OGMs. Select this option if you wish torecord one ID of up 15 seconds in length, and fourOGMs, each of which may be as long as 9 seconds.**If your ID message is less than 15 seconds in length, the remaining time will beevenly divided among the OGMs.Example: OPTION #4: ID plus 2 OGMs.If the ID is 10 seconds, then each OGM can be (51 minus 10equals 41 divided by 2 equals) 20.5 seconds in length.After selecting the number of message repeats, the dialer willautomatically exit this section.9
P R O G R AM M I N G T H E D I AL E RProgramming And Recording YourOutgoing MessagesProgramming The ChannelsThe AVD-4040 is designed to be adaptable to a complete range ofpersonalized applications. Each of the four input channels can beprogrammed individually for full system customization. Inaddition to setting enable/disable options, entry/exit delays andtype of activation (N.O., N.C., & momentary or continuous), eachuser can specify which emergency messages will be delivered andwhich numbers will be dialed. The first channel activated will bethe priority channel. Numbers programmed to that channel will becompleted before the dialer moves on to the next channel(s).Although comprehensive in scope, the system is easy to program.Just follow these simple steps.Follow these steps to program and record your outgoingmessages. Skip this portion if you have programmed in onlynumeric pagers, which rely on coded DTMF messages. As withall AVD-4040 programming, the unit need not be connected to aphone line when information is programmed in. Remember that“OPT” on the LCD stands for option; “OGM” stands foroutgoing message.NOTE: IF YOU ENTER THE WRONG CHOICE, PRESS “M” KEYREPEATEDLY AND RETURN TO THE “PROGRAM MODE”, THENSELECT THE SECTION TO CHANGE (“1” ACCEPT SECTION, “2”FOR NEXT SECTION), THEN ENTER CORRECT INFORMATION.NOTE: IF YOU ENTER THE WRONG CHOICE, PRESS “M” KEYREPEATEDLY AND RETURN TO THE “PROGRAM MODE”,THEN SELECT THE SECTION TO CHANGE (“1” ACCEPTSECTION, “2” FOR NEXT SECTION), THEN ENTER CORRECTSTEP 1 Decide which of the eight options you prefer.STEP 2 Before programming in this option, write down allSTEP 1 The LCD will read: PROGRAM: CHANNELSyour messages. Time them carefully, changing them ifnecessary to fit the alotted time frame. Practice saying them,clearly enunciating each message for maximum clarity in caseof an emergency. Keep a final recording script.STEP 3 Program your option.A) The LCD will read: PROGRAM: OGMS1(YES) 2(NO)B) Press “1” to program your OGMs. Press “2” to scroll to thenext section.C) Press “1” to select the option (#1- #8) displayed or press“2” to scroll to the desired option.STEP 4 After selecting your option as explained above, recordyour message.A) The word RECORD will appear in the upper left corner ofthe LCD, above the instruction: PRESS R. The optionselected will appear in the upper right corner. For instance,if you selected option #2, the LCD will read:RECORDOGM1PRESS RB) Speak 6-12 inches away from the microphone. Referring toyour script and speaking in a normal voice, press and holdR (the word RECORDING will be displayed), releasing thekey after you have completed enunciating your messages.The word DONE will appear on the LCD when themaximum allotted time has been reached.C) The LCD will read: PLAY OGM(S)1(YES) 2(NO)Press “1” to play back your recordingD) The LCD will read: ACCEPT1(YES) 2(NO)Press “1” to accept the recorded OGM(s). Press “2” if youwish to re-record the messages, beginning with Step 4.Changing The OGMsAfter your system is up and operating, you may change one ormore of the recorded OGMs and/or choose a completelydifferent option. To do so, simply scroll to the programmingsection on your display: PROGRAM: OGMS1(YES) 2(NO)Select the option, then begin again from Step 3 above to recordyour new message(s).1(YES) 2(NO)Press “1” to begin programming the channels.STEP 2 The LCD will read: SELECT: 1-40(DONE)Enter the channel you wish to program (1-4).Enable/DisableSTEP 3 The LCD will read: CH X: ENABLE1(YES) 2(NO)(“CH X” being the channel selected)Press “1” to enable the channel. Press “2” to disable the channel.Exit/Entry DelaysCapable of programming up to a maximum of 3 minutes and 20seconds each.STEP 4 The LCD will read: CH X: EXIT DELAY1(YES) 2(NO)Proceed with A) if you wish to program an exit delay.Proceed with B) if you do not.A) To program exit delay, press “1”.The LCD will read:ENTER 0-199 THENPRESS *Enter the digits corresponding to the number of seconds youwish to install. (For example, press “120” then press “*”, ifyou wish to install a 120-second exit delay).B) If you do not wish to program an exit delay, press “2”.STEP 5 The LCD will read: CH X: ENTRY DELAY1(YES) 2(NO)Proceed with A) if you wish to program an entry delay.Proceed with B) if you do not.A) To program an entry delay, press “1”.The LCD will read:ENTER 0-199 THENPRESS *Press “1” to program a delay. Then enter the digitscorresponding to the number of seconds you wish to install.(For example, press “90” then press “*”, if you wish to installa 90-second delay).B) If you do not wish to program an entry delay, press “2”.10
P R O G R AM M I N G T H E D I AL E RB) Continue the above procedure for each of the up to eightphone/pager numbers programmed in.STEP 9 The LCD will read:CH X: OGM X1(YES) 2(NO)(“OGM X” being the OGM recorded in OGM options #2 - #8)A) Press “1” to deliver OGM X when the channel is activated.Press “2” if you do not wish this OGM to be delivered.B) Continue the above procedure for each Channel/OGM. If youhave programmed in and recorded an ID message as one ofyour OGM options, this ID will be delivered to all channels. Itwill not appear in the Channel display.Normally Open/Normally ClosedSTEP 6 The LCD will read:CH X: N.O./N.C.1(N.O.) 2(N.C.)A) Press “1” to select a normally open channel.B) Press “2” to select a normally closed channel.Momentary/Continuous ActivationSTEP 7 The LCD will read:CH X: MOM/CONT1(MOM) 2(CONT)A) Press “1” to select a momentary trigger.B) Press “2” to select continuous activation.NOTE: ID AND OGM(S) WILL ONLY BE DELIVERED TO LANDLINENUMBERS, CELLULAR NUMBERS, AND PAGERS.Numbers Dialed/Outgoing MessagesCompleting The ProgrammingFollowing these steps allows you to choose which OGM(s) willbe delivered and which numbers will be dialed for each channel.NOTE: Dialer LCD will only show programmed numbers andOGM options.STEP 8 The LCD will read:CH X: DIAL #X1(YES) 2(NO)(“Dial #X” being the number in phone/pager location 1-8)A) Press “1” to dial phone/pager #X to be dialed wh
MODEL AD -2000 Automatic Voice/Pager Dialer System w i t h V e r i f i c a t i o n MODEL AVD-4040 Automatic Voice Dialer w/Remote Responder and Remote Arm/Disarm Controlled by Any Cell or Lan
