Transcription
NetAXS Web-based Access Control SystemHoneywell’s web-based access control offering now providesscalability means you can purchase the exact amount of accesssolutions for installations of any size. NetAXS enables users tocontrol you need now—and add doors later as business needsmanage their system anywhere there’s an Internet connection—change. Plus, NetAXS integrates with Honeywell’s fully-featuredwith no dedicated PC costs. The user-friendly design makes itWIN-PAK software to enable more robust and sophisticatedsimple to install and easy to operate and maintain. NetAXS givesNetAXS integrations. So as your system grows, NetAXS growsyou all the benefits of traditional access control such as helpingwith you.you secure your doors, manage employee access, and managesites remotely. It also lets you pull reports easily to meetcompliance requirements. With a browser-based interface, yourlearning curve and training time are significantly decreased.And you don’t have to have a dedicated PC—simply log onand you’re ready to go, securely—from the office or anywhere.NetAXS has been developed with an installer-friendly designthat easily adapts to existing IT infrastructure and methods.System Highlights: SIMPLE: Manage your access control anywhere with anInternet connection SCALABLE: Purchase the exact amount of access controlyou need now and easily add doors later FLEXIBLE: Compatible with WIN-PAK SE, WIN-PAK PEand WIN-PAK PRO CS (managed access) softwareThis means reduced installation and support cost. Its superiorN E TA X S O F F E R I N G SENCLOSURES and ADD-ON BOARDS1Door2DoorsNX1P*NetAXS-123: One door, compact (plastic) enclosureNX1MPSNetAXS-123: One door, standard (metal) enclosure with tamper switch and terminal blockNX1P*NetAXS-123: One door, compact (plastic) enclosure—and—NetAXS-123: One door add-on boardNXD1*NX1MPSNXD13Doors4DoorsNX1MPSNetAXS-123: One door, standard (metal) enclosure with power supply and battery—and—NetAXS-123: One door add-on boardNXD2NetAXS-123: One door, standard (metal) enclosure with power supply and battery—and—NetAXS-123: Two door add-on boardNX4S1NetAXS-4: 4 Door control panel (standard enclosure)NX4L1NetAXS-4: Pre-wired 4 door control panel (deluxe enclosure)*450 mA @ 12 VDC is the maximum current available to power strike, reader(s) and input devices when using a 802.3af Power Over Ethernet (PoE)connection. If additional current is required, an external 12 VDC power supply is needed.
NetAXS Web-based Access Control SystemSYSTEM BENEFITSUser FriendlyEasy to use landing page provides a user-friendly experienceso you can provide end user training in less than 30 minutes.Whether you're showing customers how to set up the basicparameters such as time zones and access levels, or teachingthem how to add or delete cards, everything you need is alllocated on one page. Simply log into your IP address andnavigate the system like you would any other Internet site.Export DataFrom the File Management tab under in the ConfigurationSystem selection view, you can see the range of data sets thatyou can get from NetAXS.Dynamic Screen UpdatesWith NetAXS, dynamic screens refresh data automaticallywithout having to refresh the page. This allows status updatesfrom NetAXS to be pushed out to the web screensautomatically, without user interaction.Door Access Modes and OptionsNetAXS allows you to assign cardholders different levelsof access.This includes the ability to save copies of the card database andpanel configuration database that are helpful files to keep asbackups. Alarms and events can also be retrieved from NetAXSfor record keeping or analysis offline. Card reports are available inCSV format and can be edited using Microsoft Excel and thendownloaded to NetAXS.Alarms, events, inputs, outputs, and status screens allautomatically update as information is received.Supervisor access allows an employee to present their cardonce to the reader to give individual access. If the supervisorpresents their card twice, they enable access for their teamduring the specified time zone.Data transfer between the controller and web browsers hasbeen optimized to reduce bandwidth requirements, improvingscreen response times.Escort access requires a supervisor escort for a non-supervisorcardholder. The supervisor must present his card first, then thenon-supervisor must present his card within ten seconds.2
NetAXS Web-based Access Control SystemENCLOSURE OPTIONSNetAXS-123NetAXS-123Compact Plastic EnclosureNetAXS-123Standard Metal EnclosureControl Panel (NXC1) Ethernet Port: Connect to webbrowser or WIN-PAK softwareMultiple Tie-Downand Grounding Points RS485: Connect panelsdownstream and/or connectto WIN-PAK software Cleaner and moreconsistent installations USB Port: Easy setup anddiagnostics from your laptop Color coded terminal labelsPoE or 12 VDCPoweredBuilt-inTamper Switch4 A, 12 VDCPower Supply Removable terminal blocks Universal input(100-240 VAC) 3.5 A available to poweraccessories - over 1 Ato power each doorTerminal Blockwith Input Fuse12V BatteryBackupNetAXS-123 Add-On BoardsNetAXS-123One Door Add-on BoardNetAXS-123Two Door Add-on BoardNetAXS-4NetAXS-4Standard Metal EnclosureNetAXS-4Deluxe Metal EnclosureControl Panel (NX4PCB) On-Board Ethernet Port Built-In PCI FunctionPre-WiredPanel Design Multiple Communication Paths Color Coded Terminal BlocksPowerDoorLocks12VBatteryBackupFire-Rated LockPower ReleaseNoiseSuppressionFilterFused RelayDistribution ModuleConvenient110V Plug24V BatteryBackup3
NetAXS Web-based Access Control SystemSYSTEM OVERVIEW1 DOORTypical PoE ConfigurationPoE SwitchLAN/WANInternetCompact Plastic EnclosureCAT5 orCAT6Cable1Web Browser InterfaceTypical3ConnectionsExit DeviceContactReader2StrikeReader22 DOORS1 Door StandardMetal Enclosureshown with 1-DoorAdd-on BoardEthernet4ConnectivityLAN/WANInternetWeb Browser Interface11-Door5, 6Add-on Board(NXD1)4 A, 12 VDCPowerSupplyBatteryTypical ConnectionsExit DeviceContactStrike2Reader1 Also compatible with WIN-PAK SE, WIN-PAK PE and WIN-PAK PRO CS(Managed Access)2 When using an IN and OUT reader, BOTH readers must have HOLD lines3 450 mA, 12 VDC is maximum available to power strike, reader(s) and input deviceswhen using a 802.3af PoE connection. If unit is externally powered with a 12 VDCsupply, higher current is available.4 USB compatibility for local configuration45 1-door add-on board compatible with compact plastic enclosure6 Requires external power when used in compact plastic enclosure7 2-door add-on board is not compatible with compact plastic enclosure8 When mixing NetAXS-123 and 4-door NetAXS (NetAXS-4) controllers,the NetAXS-123 must be configured as the first panel or gateway
NetAXS Web-based Access Control SystemSYSTEM OVERVIEW3 DOORS1 Door StandardMetal EnclosureEthernet4Connectivityshown with 2-DoorAdd-on BoardLAN/WANInternet1Web Browser Interface2-Door7Add-on Board(NXD2)4 A, 12 VDCPowerSupplyBatteryTypical ConnectionsExit DeviceContactStrikeReader 3 DOORS2Ethernet2ConnectivityLAN/WANInternetScalable Architecture8NetAXS-1231, 2 or 3 doors4 A, 12 VDCPowerSupply1Web Browser InterfaceBatteryRS485 multi-drop (up to 30 panels)NetAXS-123orNetAXS-41 Also compatible with WIN-PAK SE, WIN-PAK PE and WIN-PAK PRO CS(Managed Access)2 When using an IN and OUT reader, BOTH readers must have HOLD lines3 450 mA, 12 VDC is maximum available to power strike, reader(s) and input deviceswhen using a 802.3af PoE connection. If unit is externally powered with a 12 VDCsupply, higher current is 5 1-door add-on board compatible with compact plastic enclosure6 Requires external power when used in compact plastic enclosure7 2-door add-on board is not compatible with compact plastic enclosure8 When mixing NetAXS-123 and 4-door NetAXS (NetAXS-4) controllers,the NetAXS-123 must be configured as the first panel or gateway4 USB compatibility for local configuration5
S P E C I F I C AT I O N S A N D F E AT U R E SREADERS / DOORSNetAXS-123Door/Reader CapabilityOUTPUTSINPUTSPOWER INPUTPOWER OUTPUTNX1MPS1 DOOR Controller1,41, 2 or 3 DOOR Controller(NXD1 or NXD2 add-on board isrequired for 2nd or 3rd door)SYSTEM INFORMATIONNX4L1Four READER controllerExpandable up to 124 doors (124 readers) per controller loop2,3Dual Reader Control Capability(IN/OUT Reader per Door)YES5 – IN and OUT reader capability per door--Output Expandability(readers must have HOLD line capability)Standard Wiegand protocol supportedABA not supportedStandard Wiegand protocol supportedABA not supportedTwo SPDT relays (jumper selectable NO or NC contacts)per door rated at 3 A @ 28 VDCTwo open collector outputs (OC) (16 ma, 12 VDC):reader LED (Aux) and reader buzzer (Aux) per door are available.Eight SPDT, Form C relays rated at 10 A @ 28 VDCEight open collector outputs (OC) (16 ma, 12 VDC):4 reader LED (Aux Output) and 4 reader buzzer(Aux Output) are available.2-door solution has 8 totaloutputs: 4 relays, 4 OC(requires NXD1 add-on board)2-door solution has 8 totaloutputs: 4 relays, 4 OC(requires NXD1 add-on board)3-door solution has 12 totaloutputs: 6 relays, 6 OC(requires NXD2 add-on board)Relay Power SourceSelectable: 12 VDC self-powered- OR 0 to 28 VDC externally supplied sourceNumber of InputsController has a total of six configurable four-state supervised input points.(Factory default settings are Status, REX, Reader Tamper A, Reader TamperB, Power Fail and General Input)4-door solution expandable to 72 total outputsusing a maximum of four (4) NX4OUT relay output boards.0 to 28 VDC externallysupplied source 24 VDC self-powered14 configurable four-state supervised input pointsInput Expandability2-door solution has atotal of 10 inputs(requires NXD1 add-on board)2-door solution has a total of10 inputs (requires NXD1 add-onboard). 3-door solution has atotal of 14 inputs (requires NXD2add-on board)Power-Fail and Panel TamperYesYesYesYes“Off the Wall” Tamper CapabilityYes------Power over Ethernet (PoE) 802.3afor external12 VDC supply-Power over Ethernet (PoE)or 12 VDC93 VAC to 264 VAC,50/60 Hz inputprovides 12 VDC, 4 A outputYes 12 VDC from included powersupplyPower for Locks/Strikes450 mA, 12 VDC is available to powerstrike, reader(s) andinput devices when using PoEIf higher current is needed, power byexternal 12 VDC supply1.15 A per door for locks/strikes,readersand input devices(3.5 A @ 12 VDC total)Backup Battery SystemExternal612 VDC, 7 AH batteryUnit InputSocket or Hardwire AC InputControl Board Power InputPower for Reader(s)and Input Devices4-door solution expandable to 78 total inputs5 using amaximum of two NX4IN relay input boards.120 VAC, 6 A, 60 Hz input for wall 115 VAC, 60 Hz, 2 A power supplytransformer provides 16.5 VAC @input provides50 VA output24 VDC, 6 A output-Yes16.5 VAC from included wall 24 VDC from included powermount transformersupply600 mA auxiliary current600 mA auxiliary currentavailable to power theavailable to power the readersreaders and other devicesand other devicesLocks/strikes must be1.1 A per door for locks/externally poweredstrikes (4.4 A @ 24 VDC total)12 VDC, 7 AH batteryTwo 12 VDC, 7 AH batteriesMaterialHigh Impact PlasticMetalMetalMetalPhysical Enclosure Size7.75"H x 7.75"W x 2.75"D13.9"H x 11.9"W x 4.7"D18"H x 15"W x 4.5"D23.9"H x 17.7"W x 4"DWiring Access Yes-YesYes-YesRemovable Terminal Blockswith Color Coded LabelsGraphic Wiring Cards / LabelsCaptive Mounting HardwareCable Shield Termination PointsGlobal Geographic Time Zone SupportDaylight Saving Time SupportYes - via NTP network serverReal Time ClockClock SynchronizationProcessorSystem MTBF(mean time between failures)Freescale Coldfire 32-bit250,000 hoursTemperature RatingsCertifications and Approvals6NX4S1Expandable up to 93 DOORS (186 readers) per controller loop2,3Number of OutputsENCLOSURENX1PExpandabilityReader CompatibilityINSTALLATIONNetAXS-4CE and FCC compliantUL-294 listing pendingFreescale Coldfire 32-bit250,000 hours32 to 120 F (0 C to 49 C) Operating-67 to 185 F (-55 C to 85 C) StorageCE and FCC compliantUL-294 listingFCC compliantUL-294 listing
S P E C I F I C AT I O N S A N D F E AT U R E SNetAXS-123COMMSLEDsNX1PStatus LEDsHOSTDOORCONTROLCARDS and DATABASEREPORTINGand ANALYSISNX4S1NX4L119 LEDs total (Power, system run, Ethernet, RS232, loop,downstream, readers, relay status)Ethernet, USB8, RS485Ethernet, RS485, RS232Use RS485 port to connect a maximum of 6 downstream I/Omodules (4 output and 2 input)Built-in Communication OptionsI/O Expansion ModuleConnectivity--Total of 31 panels in a loop 2,3Total of 31 panels in a loop2,3WIN-PAK SE, WIN-PAK PE, WIN-PAK PRO CS, WIN-PAK CS 4.1WIN-PAK 2005, WIN-PAK PRO 2005, WIN-PAK 2.0 Release 4, WIN-PAK PRO Release 4Supported downstream panels include NetAXS-123 and NetAXS-4Software Compatibility 9EMBEDDEDWEB SERVERNX1MPS12 LEDs total (12V power, PoE, over current, Ethernet, RS485, reader(s),door state, run, relay status)Controller Loop CapabilityNetAXS-123 as Gateway PanelNetAXS-4 as Gateway PanelCurrently supported downstream panels include NetAXS-4 onlyusing PCI3 Converterusing N-485-PCI-2 ConverterSupported downstream panels include NetAXS-123, NetAXS-4, N-1000 family and NS2Not compatible with NetAXS-123 or NetAXSCard only, card and PIN, card or PIN, PIN only, lockdown, disabled, supervisor, escort, limited use card, expire on date,first card rule, snow day rule, time zone toggle, anti-passback, duress 5YesYesYesYesLocal and global capability, hard and soft implementationNetAXS-123 allows anti-passback using In and Out readers per door (local and global) 5Door Control ModesInterlocks for custom actionsAnti-Passback CapabilityCard and Event Buffer CapacityFirmware RevisionOffline Database backup availableExport Capabilities10,000 card capacity, 25,000 event capacityOn-board flash memory for field firmware revision updates and feature expansionCard and configuration databasesCard database, alarms and events (CSV format)5Number of Card FormatsSite CodesMaximum Card Format Size128 unique card formats can be supported58Time ZonesAccess LevelsHolidaysIntegrated basic reportsImport/export of card databaseAlarms and events can beexported and saved inoffline storageSupported BrowsersIcon Driven Landing PageWeb Browser ControlWeb Server SupportSecure Web BrowsingDynamic Screen RefreshMultiple user connections12751282555Global Languages SupportedWORLDWIDE ACCEPTABILITYNetAXS-4Printed DocumentationQuick Start GuidesFull User and Installation GuidesMulti-Language BasicInstallation Guides75-bit (maximum card # ernet Explorer and Mozilla FirefoxYes--Full control monitor and view live events manually control doors and readersAll access control functionsSSL and SHA-1 secure socket layer encryptionYesYesYesYesYesEnglish, Italian, French, Dutch, Spanish, Czech,English, Italian, French, Dutch, Spanish, CzechSimplified Chinese and Arabicand Simplified ChineseEnglish, Italian, French, Dutch, Spanish, Czech,EnglishSimplified Chinese and ArabicYesYes--on product CDon product CDPrintedPrintedYesYesUser Translated FilesUniversal Power Supply InputPower over Ethernet (PoE)802.3afYes--Customer ability to export, import, modify, create and add language files.Can be selected for use with unique login accounts.Yes-93-264 VAC, 50/60 Hz input1 A second door may be added with a NXD1 add-on board however, PoE power restrictionsapply (see footnote 4).2 A total of 31 NetAXS-123 and NetAXS-4 panels may be combined in a controller loop for amaximum of 123 doors.3 When mixing NetAXS-123 and NetAXS-4 controllers, the NetAXS-123 must be the gatewaypanel.4 450 mA, 12 VDC is maximum current available to power strike, reader(s) and input deviceswhen using a 802.3af PoE connection. If unit is externally powered, higher current isavailable.----5 When using WIN-PAK software, this feature may have limitations or not exist.6 An external UPS is required to power the PoE power source for battery backup.7 Suitable for handling the 75-bit transparent card format of PIV, TWIC and FRAC cards.8 USB port for setup and troubleshooting.9 NetAXS-123 and NetAXS-4 must be configured in WIN-PAK as a N-1000-IV-X.7
NetAXS Web-based Access Control SystemORDERINGPart NumberDescriptionNetAXS-1231 Door SolutionsNX1PNetAXS-123: One door, compact (plastic) enclosure - PoE or externally poweredNX1MPSNetAXS-123: One door, standard (metal) enclosure with tamper switch and terminal block. Includes 4 A, 12 VDC output/100-240VAC input power supply and 12V, 7 AH batteryAdd-on Boards (For 2 and 3 door solutions)NXD1*NXD2**NetAXS-123: One door add-on board(Adds 1 door to your existing 1-door system 2 doors)NetAXS-123: Two door add-on board(Adds 2 doors to your existing 1-door system 3 doors)NetAXS-123 Components & AccessoriesNXC1NetAXS-123 - Control Board onlyNetAXS-123 Access Control Starter Kits with ReadersNX1P10NetAXS-123: Includes NX1P One door compact (plastic) enclosure and (1) OP10HONR mini-mullion proximity readerNX1MPS10NetAXS-123: Includes NX1MPS One door, standard (metal) enclosure with power supply and battery and (1) OP10HONRmini-mullion proximity readerNXD1OP10NXD2OP10NetAXS-123: Includes NXD1 One door add-on and (1) OP10HONR mini mullion proximity reader(Adds 1 door to your existing 1-door system 2 doors)NetAXS-123: Includes NXD2 Two door add-on and (2) OP10HONR mini-mullion proximity readers(Adds 2 doors to your existing 1-door system 3 doors)NetAXS-4NetAXS-4 Web Based Access Control PanelsNX4S1NetAXS-4: 4 Door Control Panel (Standard Enclosure)NX4L1NetAXS-4: Pre-wired 4 Door Control Panel (Deluxe Enclosure)NX4PCBNetAXS-4: NetAXS PCB Board with Manual and (4) Surge SuppressorsNetAXS-4 Access Control Starter Kits with OP40LNetAXS-4: IP Ready Access Starter Kit with WIN-PAK, NX4S1 Deluxe Standard Enclosure Option and (4) OP30HONR MullionProximity ReadersNetAXS-4: IP Ready Access Starter Kit with WIN-PAK, NX4S1 Standard Enclosure Option and (4) OP30HONR MullionProximity ReadersNetAXS-4: NetAXS with Standard Enclosure - Standalone Web-based Access 4 Door Kit with (4) OP30HONRNetAXS-4: NetAXS with Standard Enclosure - Standalone Web-based Access 4 Door Kit with (4) OP40HONRNetAXS-4: NetAXS with Deluxe Enclosure - Standalone Web-based Access 4 Door Kit with (4) OP30HONRNetAXS-4: NetAXS with Deluxe Enclosure - Standalone Web-based Access 4 Door Kit with (4) OP40HONRNetAXS-4 AccessoriesNX4IN***NetAXS-4: NetAXS Input Board - 32 Inputs per Board, Connect 2 per NX4 Panel, Total 64 InputsNX4OUT***NetAXS-4: NetAXS Output Board - 16 Relays per Board, Connect 4 per NX4 Panel, Total 64 Relays* Requires external power when used in compact plastic enclosure** 2-door add-on board is not compatible with compact plastic enclosure*** Not compatible with NetAXS-123For more information:www.honeywellaccess.comHoneywell Security GroupHoneywell2700 Blankenbaker Pkwy, Suite 150Louisville, KY y 2010 2010 Honeywell International Inc.
NX4S1 NetAXS-4: 4 Door control panel (standard enclosure) NX4L1 NetAXS-4: Pre-wired 4 door control panel (deluxe enclosure) *450 mA @ 12 VDC is the maximum current available to power strike, reader(s) and inp
