Transcription
Pressure Measurement SolutionsDial IndicatingDigitalDifferential& SanitaryGaugesAccessories
At NOSHOK, we pride ourselves on being innovators in the industry bycontinually offering the latest technology and measurement solutions, and providingthe best customer support in the marketplace.Established in 1967, NOSHOK was one of the ¿rst companies to offer liquid ¿lledpressure gauges. We also took a bold step by backing our quality gauges with anextended 3-year warranty. That unwavering standard of quality has endured forover 45 years, and as we have expanded our product offering we continue to provideindustry-leading warranties. NOSHOK also leads the industry as one of the ¿rst companiesto offer corrosion-resistant zinc nickel plating standard on our carbon steel valves.We have the capacity to put together special requirements which are so often hard to¿nd. If you do not ¿nd what you need in this catalog, chances are we can still put asolution together.NOSHOK is committed to providing excellence on every level. Thank you for choosingNOSHOK products.Jeff N. ScottPresidentNOSHOK Corporate HeadquartersYour Single Source Instrumentation CompanyNOSHOK is a member and actively supports:NOSHOK is an ISO 9001:2008 registered company.
WARRANTY INFORMATIONDry Pressure GaugesNOSHOK’s Three Year Warranty applies to the 1000 Series digital gauge. NOSHOK’s One Year Warranty applies to 100, 200, 400, 640, 740,and 800 Series dry gauges; 10 and 20 Series dry sanitary gauges; and 1000, 1100, 1200, and 1300 Series dry differential gauges.Liquid Filled Pressure GaugesNOSHOK’s Three Year Warranty applies to 300, 500, 660, 760, and 900 Series liquid ¿lled gauges; 10 and 20 Series liquid ¿lled sanitary gauges;and 1000, 1100, 1200, and 1300 Series liquid ¿lled differential gaugesNOSHOK guarantees all products to be free from defects in material and workmanship, to remain within catalogued accuracy speci¿cations,and to operate within the catalogued performance speci¿cations. These products must be operated within the catalogued environmental andapplication parameters. Determination of failure will be made by NOSHOK, Inc.’s equipment and personnel or a certi¿ed test facility specializingin this type of evaluation. Gauge failures determined to be caused by over-range, incompatibility with environment or product media and abusewill not be considered under this warranty. NOSHOK, Inc. will, at its discretion, repair or replace the working parts of the damaged gauge withoutcost to the customer.Limitations which apply are: Bourdon tube pressure gauges must be used within their calibrated maximum range to prevent damage.Pressure gauges must be operated within the following working pressure limits: Dynamic pressure application, 60% of the dial range; Static pressureapplications, where no sharp fluctuations occur, 90% of the dial range. The gauges must be operated within speci¿ed ambient temperatureranges.CAUTION:Operating conditions including, but not limited to, system pressure, media compatibility and ambient conditions must be considered whenselecting gauges and accessories, improper selections and use of gauges could possibly cause gauge failure and lead to possible propertydamage or personal injury. Refer to the American National Standard ANSI B40.1 for the correct selection and use of gauges. A copy of thisstandard may be obtained from the American Society of Mechanical Engineers, United Engineering Center, 345 East 47th Street, New York,NY 10017.In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make designchanges without prior notice.3
T A B L EO FC O N T E N T SWARRANTY INFORMATIONDry Gauges, Liquid Filled Gauges, Diaphragm Seals & Accessories .3DIAL INDICATING PRESSURE GAUGESStandard:100 SERIES. 6-9Low Pressure Diaphragm:200 SERIES . 10-13Brass Case Liquid Filled:300 SERIES . 14-17All Stainless Steel, Dry & Liquid Filled:400/500 SERIES .18-21Process:600/700 SERIES .22-23Precision Test:800 SERIES .24-25ABS & Stainless Steel Liquid Filled:900 SERIES .26-29DIGITAL PRESSURE GAUGEDigital Gauge:1000 SERIES .30-31DIFFERENTIAL PRESSURE GAUGESPiston Type:1000 SERIES .32-33Diaphragm Type:1100 SERIES . 34-35Membrane Type High Static Pressure:1200 SERIES. 36-37Membrane Type Nominal Static Pressure:1300 SERIES . 38-39Dial Layouts:1000 & 1100 SERIES .40-414
T A B L EO FC O N T E N T SSANITARY PRESSURE GAUGESFractional:10 SERIES .42-43Heavy-Duty:10 SERIES . 44-45Homogenizer:20 SERIES. 46-47OPTIONS & ACCESSORIESOverview Chart by Gauge Series .48-51Panel Mounting/Flanges, Cases & Cover Rings, Lenses, Maximum Indicating Pointers, Set Pointers, Rubber Case Protectors,Ori¿ces, Recalibrators & Adjustable Pointers, Overpressure Protection, Ammonia Refrigeration Gauges, Liquid Filling Options,Special Connections, Reid Vapor Test Gauges, Receiver Gauges, Metric Dials & Customized Special Dials, Certi¿ed Calibration,Piston-Type and Sintered Pressure Snubbers, Pigtail Steam Syphons, Swivel Adapter, Magnetic Spring Contact Switch .52-57Gauge Accuracy/Standard Dial ConÀguration Charts . 58-63Reference Material . 64-65Frequently Asked Questions . 66-675
Dial Indicating Pressure GaugesStandard100 High quality dry gauges for reliable service on applications not corrosive to brassVacuum and compound through 15,000 psi1-1/2”, 2”, 2-1/2”, 4” sizes – bottom, back, left and right side connectionsDry, ABS case (steel, chrome or stainless steel optional)Panel mount clamp and front Àange mountingStandard UV resistant dials are dual scale in psi and kPa (kilopascals); dual scalepsi/bar and psi/kg/cm² are available in most popular rangesOPERATING SPECIFICATIONS1. Working Pressure Limitationsa. Dynamic PressureThe working pressure should be limited to60% of the dial range.b. Static PressureThe working pressure, where no sharpÀuctuations occur, should be limited to 90%of the dial range2. Ambient Temperature0 F to 140 F (-18 C to 60 C)3. Media Temperature-4 F to 140 F (-20 C to 60 C)APPLICATIONSŶ HydraulicsŶ PneumaticsŶ PetrochemicalŶ MedicalŶ FoodŶ PharmaceuticalŶ Most industrial and commercialapplicationsACCURACYŶ 1-1/2, 2 and 2-1/2" 100 Series gauges: 2.5%Ŷ 4" 100 Series gauges: 1.5%For details on accuracy/standard dial con¿guration anddial layouts, see pages 76-81.6SERIESMODELSCaseBezelLensBourdon TIONS15-100, 15-110, 20-100, 20-110, 20-148, ABS (Acryl Nitril Butadien Styrol)25-100, 40-10015-120, 20-120, 25-120Black painted steel with chrome triangular bezeland U-clamp15-110, 20-110, 25-110Built-in bezel, molded as an integral part of thecase for ease of panel mounting.15-120, 20-120, 25-120Chrome-plated steel triangular bezel15-100, 15-110, 15-120, 20-100, 20-110, Clear front acrylic20-120, 20-148, 25-100, 25-110, 25-120,40-10015-100, 15-110, 15-120, 20-100, 20-120, Phosphor bronze20-110, 20-148, 25-100, 25-120, 25-110,40-10015-100, 15-110, 15-120, 20-100, 20-110 1/8Ǝ NPT brass20-1481/8Ǝ NPT/10-32 Female brass20-100, 20-110, 20-120, 25-100, 25-110, 1/4Ǝ NPT brass25-120, 40-100SAE J1926-3:7/16-2015-100, 15-110, 15-120, 20-100, 20-110, Brass & nylon, or all-brass with highly polished20-120, 20-148, 25-100, 25-110, 25-120, bearing surfaces40-10015-100, 15-110, 15-120, 20-100, 20-110, 2.5% full scale ASME B40.1 Grade B20-120, 20-148, 25-100, 25-110, 25-12040-100 1.5% full scale ASME B40.1 Grade A15-100, 15-110, 15-120, 20-100, 20-120, Molded plastic20-110, 20-148,25-100, 25-110, 25-120,40-10015-100, 15-110, 15-120, 20-100, 20-110, White background with black psi scale and red20-120, 20-148, 25-100, 25-110, 25-120, kPa scale; UV resistant40-100
100 SERIESORDERING INFORMATIONDIMENSIONSORDERING INFORMATIONSERIES100SIZES15 1-1/2ƎCASE TYPESPRESSURERANGESSCALE OPTIONS***CONNECTION 30/200psi20 2ƎABS, bottom connectionABS, back connection-30 inHg vacuum to 0 psi-30 inHg to 0 to 15 psi-30 inHg to 0 to 30 psi-30 inHg to 0 to 60 psi-30 inHg to 0 to 100 psi-30 inHg to 0 to 160 psi-30 inHg to 0 to 200 psipsi single scaleSteel case panel mountSquare ABS, panel mount (2Ǝ only)-30 inHg to 0 to 300 psi2000 psi to 15 psi3000 psi to 30 psi4000 psi to 60 psi6000 psi to 100 psi10000 psi to 160 psi1500Other ranges available on requestpsi/kPa psi/kPa dual scalepsi/kg/cm21/8 1/8Ǝ NPT7/16 SAE J1926-3:7/16-20 AdjustablePMC Panel Mount ClampSSB Polished Stainless Steel BezelBLRF Black Rear FlangeBLFFCFFSBFFSCFFBSCSSC Stainless Steel CaseCRC Chrome CaseFAC Flat Sided ABS CaseBlack Front Flange – ABS CaseChrome Front Flange – ABS CaseBlack Front Flange – Steel CaseChrome Front Flange – Steel CaseBlack Steel CaseBCRSSCRCCRPCCRCAR40 4Ǝ25 2-1/2Ǝ12014830/3001530601001600 psi0 psi0 psi0 psi0 psi0 psito 200 psito 300 psito 400 psito 600 psito 1,000 psito 1,500 psi20003000500060001000015000to 2,000 psito 3,000 psito 5,000 psito 6,000 psito 10,000 psito 15,000 psipsi/kg/cm2 dual scale psi/bar psi/bar dual scale1/4 1/4Ǝ NPTLL Polycarbonate LensGL Glass Lens*SGL Safety Glass Lens*Black Cover Ring**Stainless Steel Cover Ring**Chrome Cover Ring**Polished Chrome Cover Ring**Chrome Adapter Ring*0 psi0 psi0 psi0 psi0 psi0 psiHLSPMIPSDMLMST Stainless Steel TaggingCPO Brass Sintered Ori¿ce 20 MicronBP1 Brass Press Fit Ori¿ce 0.1 mmHomalite Lens*BP3 Brass Press Fit Ori¿ce 0.3 mmRed Set Pointer**BP8 Brass Press Fit Ori¿ce 0.8 mmMaximum Indicating PointerSilicone Dampened MovementLaser MarkingPlease consult your local NOSHOK Distributor or NOSHOK, Inc. for availability and delivery information.NOTE: Refer to 100 Series options & accessories chart on page 66 for availability by model number.* A steel, stainless or chrome case & cover ring must be additionally ordered when lenses other than acrylic are utilized on all 100 Series models.** Only 110 models require a steel, stainless or chrome case & cover ring to be additionally ordered when utilizing a set pointer or cover ring.Please consult factory when a set pointer is to be utilized on a 120 model.*** Other ranges available on request20-110 – 100 psi –1/4–BSCEXAMPLE1
40-100 1.5% full scale ASME B40.1 Grade A Pointer 15-100, 15-110, 15-120, 20-100, 20-120, 20-110, 20-148,25-100, 25-110, 25-120, 0 4001 - Molded plastic Dial 15-100, 15-110, 15-120, 20-100, 20-110, 20-120, 20-148, 25-100, 25-110, 25-120, 0 4001 - White background with black psi scale and red kPa scale; UV resistant High quality dry gauges for reliable service on applications not .
