WIXLIB

Siemens AG 2012Level measurementContinuous level measurement — Ultrasonic transducersEchoMax XPS and XCT Overview Benefits Integral temperature compensationLow ringing effect reduces blanking distanceOptional foam facing for dusty applicationsSelf-cleaning and low-maintenanceChemically resistantHermetically sealed ApplicationThe transducers can be fully immersed, are resistant to steamand corrosive chemicals, and can be installed without flanges.The XPS series offers versions for various measuring ranges upto 40 m (130 ft) and up to a max. temperature of 95 C(203 F).EchoMax XPS/XCT transducers use ultrasonic technology tomeasure level in a wide range of liquids and solids.The XCT series can be used in applications at higher temperatures to measure level up to a distance of 12 m (40 ft) and at amax. temperature of 95 C (203 F).During operation, the EchoMax transducers emit acousticpulses in a narrow beam. The level monitor measures the propagation time between pulse emission and its reflection (echo) tocalculate the distance.Siemens FI 01 · 20134/1894

Siemens AG 2012Level measurementContinuous level measurement — Ultrasonic transducersEchoMax XPS and XCT Technical specificationsInputXPS-10 (standardand F models)XPS-15 (standardand F models)XPS-30XPS-40XCT-8 (standardand sanitarymodels)XCT-12Measuring range0.3 . 10 m(1 . 33 ft)Standard:0.3 . 15 m(1 . 50 ft)Flanged:0.45 . 15 m(1.5 . 50 ft)0.6 . 30 m(2 . 100 ft)0.9 . 40 m(3 . 130 ft)0.6 . 8 m(2 . 26 ft)0.6 . 12 m(2 . 40 ft)Frequency44 kHz44 kHz30 kHz22 kHz44 kHz44 kHzBeam angle12 6 6 6 12 6 Standard:-40 . 145 C(-40 . 293 F)Sanitary:-40 . 125 C(-40 . 260 F)-40 . 145 C(-40 . 293 ent temperature Standard: -40 . 95 C (-40 . 203 F)F: -20 . 95 C (-4 . 203 F)Pollution degree4Pressure8 bar g (120 psi g)Flanged:0.5 bar g(7.25 psi g)8 bar g (120 psi g)Flanged: 0.5 bar g(7.25 psi g)0.5 bar g(7.25 psi g)Flanged: 0.5 bar g(7.25 psi g)0.5 bar g(7.25 psi g)Standard: 4 bar g (60 psi g):-40 . 138 C (-40 . 280 F)Standard: 8 bar g (120 psi g):-40 . 95 C (-40 . 203 F)Flanged: 0.5 bar g (7.25 psi g)Sanitary: XCT-8: 0.5 bar g (7.25 psi g)Weight0.8 kg(1.8 lb)1.3 kg (2.8 lb)Flanged: 2 kg(4.4 lb)4.3 kg(9.5 lb)8 kg(18 lb)0.8 kg(1.7 lb)Power supplyOperation of transducer only with approved Siemens Milltronics controllersMaterialStandard: PVDFFlanged: PVDFwith CPVC flangeStandard: PVDFFlanged: PVDFwith CPVC flangeStandard: PVDFFlanged: PVDFwith CPVC flangeOption: PTFE facewith CPVC flangeOption: PTFE facewith CPVC flangeOption: PTFE facewith CPVC flangeColorStandard: blueF: grayStandard: blueF: grayblueProcessconnectionStandard: 1" NPTor 1" BSPTF: 1" NPTStandard: 1" NPTor 1" BSPTF: 1" NPT1.5" universal thread (NPT or BSPT)1" NPT or R 1" (BSPT), EN 10226Degree ofprotectionIP66/68IP66/68IP66/68IP66/68Cable2 wire twisted pair/braided and foil shielded 0.5 mm² (20 AWG) PVC jacketSeparationMax. 365 m (1 200 ft)Certificates andapprovalsStandard:CE1), CSA, FM,ATEX II 2GDStandard:CE1), CSA, FM,ATEX II 2GDF: FM Class I, Div1, Groups A, B, Cand D, Class II Div1, Groups E, F andG, Class IIIF: FM Class I, Div1, Groups A, B, Cand D, Class II Div1, Groups E, F andG, Class IIIDesign1)EMC certificate available on request.4/190Siemens FI 01 · 2013CE1), CSA, FM,ATEX II 2G 1D1.3 kg(2.8 lb)PVDFStandard: PVDFOptions: DERAKANE flange; PTFE facewith universal PVDF flangebluewhiteIP66/68CE1), CSA, FM,ATEX II 2G 1DIP66/682 wire twisted pair/braided and foilshielded 0.5 mm² (20 AWG) siliconejacketStandard:CE1), CSA, FM,ATEX II 2GDSanitary: CE,CTICK, CSAUS/CCE1), CSA, FM,ATEX II 2GD

Siemens AG 2012Level measurementContinuous level measurement — Ultrasonic transducersEchoMax XPS and XCTSelection and Ordering dataOrder No.Selection and Ordering dataEchoMax XPS-10 ultrasonic transducerHigh-frequency ultrasonic transducer designed fora wide variety of liquid and solid applications, foruse with approved controllers. Includes integraltemperature sensor.Measuring range: min. 0.3 m, max.10 m7ML1115-Further designsPlease add "-Z" to Order No. and specify Ordercode(s).Mounting thread and facing1" NPT [(Taper), ANSI/ASME B1.20.1]1" NPT [(Taper), ANSI/ASME B1.20.1] with foamfacing1)1" NPT [(Taper), ANSI/ASME B1.20.1] with PTFEfacing2)R 1" [(BSPT), EN 10226]R 1" [(BSPT), EN 10226] with foam facing1)R 1" [(BSPT), EN 10226] with PTFE facing2)7777 0Order codeStainless steel tag [69 x 50 mm (2.71 x 1.97 inch)]:Measuring point number/ identification (max. 27characters) specify in plain textY15Operating InstructionsOrder No.Quick Start guide, multi-language7ML1998-5QM82Applications Guidelines, multi-languageNote: The Applications Guidelines should beordered as a separate line item on the order.7ML1998-5HV612345This device is shipped with the Siemens Milltronicsmanual CD containing the complete ATEX QuickStart and Operating Instructions library.01AccessoriesCable length5 m (16.40 ft)10 m (32.81 ft)30 m (98.43 ft)BCE50 m (164.04 ft)100 m (328.08 ft)FKMounting flangeNoneA3" ASME, 150 lb, flat faced4" ASME, 150 lb, flat facedCD6" ASME, 150 lb, flat faced8" ASME, 150 lb, flat facedEFDN 80, PN 10/16, Type A, flat facedDN 100, PN 10/16, Type A, flat facedDN 150, PN 10/16, Type A, flat facedGJLJIS10K3B StyleJIS10K4B StyleJIS10K6B Style(Note: Flange bolting patterns and facings dimensionally correspond to the applicable ASME B16.5 orEN 1092-1, or JIS B 2220 standard.)MPRApprovalsATEX II 2 GD, FM Class I Div. 2, SAA Class I Zone 1CSA Class I Div. 13)34Tag, stainless steel with hole, 12 x 45 mm(0.47 x 1.77 inch), one text line for fastening onsensors7ML1930-1BJSubmergence shield kit7ML1830-1BHEasy Aimer 2, with ¾" x 1" NPT PVC coupling7ML1830-1AQEasy Aimer 2, aluminum with M20 adapter and1" and 1½" BSPT aluminum couplings7ML1830-1AXEasy Aimer 304, with stainless steel coupling7ML1830-1AUEasy Aimer 304, with M20 adapter and 1" and1½" BSPT 304 SS couplings7ML1830-1GNUniversal box bracket, mounting kit7ML1830-1BKChannel bracket, wall mount7ML1830-1BLExtended channel bracket, wall mount7ML1830-1BMChannel bracket, floor mount7ML1830-1BNExtended channel bracket, floor mount7ML1830-1BPBridge channel bracket, floor mount(see Mounting Brackets on page 4/204 for moreinformation)7ML1830-1BQ1" NPT locknut, plastic7ML1830-1DS1" BSPT locknut, plastic7ML1830-1DR1)Not available with flanged versionsAvailable with flanged versions only3) Valid with mounting thread and facing options 0 . 2 only2)Siemens FI 01 · 20134/1914

Siemens AG 2012Level measurementContinuous level measurement — Ultrasonic transducersEchoMax XPS and XCTSelection and Ordering dataOrder No.Selection and Ordering dataEchoMax XPS-10F ultrasonic transducerHigh-frequency ultrasonic transducer designed fora wide variety of liquid and solid applications, foruse with approved controllers. Includes integraltemperature sensor.Measuring range: min. 0.3 m, max.10 m7ML1170-Further designsPlease add "-Z" to Order No. and specify Ordercode(s).Mounting thread and facing1" NPT [(Taper), ANSI/ASME B1.20.1]47777 01Stainless steel tag [69 x 50 mm (2.71 x 1.97 inch)]:Measuring point number/ identification (max. 27characters) specify in plain textY15Operating InstructionsOrder No.Quick Start guide, multi-language7ML1998-1DU017ML1998-5HV61Cable length5 m (16.40 ft)10 m (32.81 ft)30 m (98.43 ft)BCDApplications Guidelines, multi-languageNote: The Applications Guidelines should beordered as a separate line item on the order.50 m (164.04 ft)100 m (328.08 ft)EFThis device is shipped with the Siemens Milltronicsmanual CD containing the complete ATEX Quick Startand Operating Instructions library.Mounting flange, flush mountNoneA3" ASME, 150 lb, flat faced4" ASME, 150 lb, flat facedBC6" ASME, 150 lb, flat faced8" ASME , 150 lb, flat faced(Note: Flange bolting patterns and facings dimensionally correspond to the applicable ASME B16.5,or EN 1092-1, or JIS B 2220 standard.)DEApprovalsFM Class I Div. 14/192Siemens FI 01 · 2013Order codeAccessories1Tag, stainless steel with hole, 12 x 45 mm(0.47 x 1.77 inch), one text line for fastening onsensors7ML1930-1BJSubmergence shield kit7ML1830-1BHEasy Aimer 2, with ¾" x 1" NPT PVC coupling7ML1830-1AQEasy Aimer 304, with stainless steel coupling7ML1830-1AUUniversal box bracket, mounting kit7ML1830-1BKChannel bracket, wall mount7ML1830-1BLExtended channel bracket, wall mount7ML1830-1BMChannel bracket, floor mount7ML1830-1BNExtended channel bracket, floor mount7ML1830-1BPBridge channel bracket, floor mount(see Mounting Brackets on page 4/204 for moreinformation)7ML1830-1BQ1" NPT locknut, plastic7ML1830-1DS

Siemens AG 2012Level measurementContinuous level measurement — Ultrasonic transducersEchoMax XPS and XCTSelection and Ordering dataOrder No.Selection and Ordering dataEchoMax XPS-15 ultrasonic transducerHigh-frequency ultrasonic transducer designed fora wide variety of liquid and solid applications, foruse with approved controllers. Includes integraltemperature sensor.Measuring range: min. 0.3 m, max. 15 m7ML1118-Further designsPlease add "-Z" to Order No. and specify Ordercode(s).Mounting thread and facing1" NPT [(Taper), ANSI/ASME B1.20.1]1" NPT [(Taper), ANSI/ASME B1.20.1] with foamfacing1)1" NPT [(Taper), ANSI/ASME B1.20.1] with PTFEfacing2)R 1" [(BSPT), EN 10226]R 1" [(BSPT), EN 10226] with foam facing1)R 1" [(BSPT), EN 10226] with PTFE facing2)777 7 0Stainless steel tag [69 x 50 mm (2.71 x 1.97 inch)]:Measuring point number/ identification (max. 27characters) specify in plain textY1501Operating InstructionsOrder No.Quick Start guide, multi-language7ML1998-5QM822Applications Guidelines, multi-languageNote: The Applications Guidelines should beordered as a separate line item on the order.7ML1998-5HV61345This device is shipped with the Siemens Milltronicsmanual CD containing the complete ATEX Quick Startand Operating Instructions library.Cable length5 m (16.40 ft)10 m (32.81 ft)30 m (98.43 ft)BCE50 m (164.04 ft)100 m (328.08 ft)FKAccessoriesMounting flangeNoneA6" ASME, 150 lb, flat faced8" ASME, 150 lb, flat facedDEDN 150, PN 10/16, Type A, flat facedDN 200, PN 10, Type A, flat facedJKJIS10K 6BJIS10K 8B(Note: Flange bolting patterns and facings dimensionally correspond to the applicable ASME B16.5or EN 1092-1, or JIS B 2220 standard.)NPApprovalsATEX II 2GD, FM Class I Div. 2, SAA Class ICSA Class I Div. 13)1)Not available with flanged versions2) Available with flanged versions only3)Available with mounting options 0 . 2 onlyOrder code34Tag, stainless steel with hole, 12 x 45 mm(0.47 x 1.77 inch), one text line for fastening onsensors7ML1930-1BJSubmergence shield kit7ML1830-1BJUniversal box bracket, mounting kit7ML1830-1BKChannel bracket, wall mount7ML1830-1BLExtended channel bracket, wall mount7ML1830-1BMChannel bracket, floor mount7ML1830-1BNExtended channel bracket, floor mount7ML1830-1BPBridge channel bracket, floor mount(see Mounting Brackets on page 4/204 for moreinformation)7ML1830-1BQ1" NPT locknut, plastic7ML1830-1DS1" BSPT locknut, plastic7ML1830-1DREasy Aimer 2, with ¾" x 1" NPT PVC coupling7ML1830-1AQEasy Aimer 2, aluminum with M20 adapter and1" and 1½" BSPT aluminum couplings7ML1830-1AXEasy Aimer 304 with stainless steel coupling7ML1830-1AUEasy Aimer 304, with M20 adapter and 1" and 1½"BSPT 304 SS couplings7ML1830-1GNSiemens FI 01 · 20134/1934