Transcription
Roller Shade Bracket and Lineal GuideSivoia QS and QS WirelessRoller 20Brackets (all Roller 20 brackets are a smaller version of Roller 64 brackets)TypeP/NPhotoNotesUniversal Bracket KitWIN-BRK-20UCan be affixed to wall, ceiling, or jambFascia Bracket KitWIN-BRK-20FBoth square and round fascia attach to this bracketDual Bracket KitWIN-BRK-20DJ GIH No fascia / top back cover available.MUST be added as a separate line item in the SCTKLinealsTypeP/N (Sample, XX color)PhotoNotesPlastic End Caps204 116 132 (white)Cleans the look of an exposed, universal bracket2.75 in. (70 mm)Fascia SquareWSL-FSS-3-XXFascia, Top Back Cover, Pocket, found under“Add Line Item” “Trim” in the SCT2.75 in. (70 mm)Fascia RoundWSL-FSR-3-XXRound fascia only available for Roller 20 & 642.75 in. (70 mm)Top Back CoverWSL-TB-3-XX3.5 in. (89 mm)PocketWSL-PK-35-XXSame size pocket as Roller 646 in. x 9 in.(152 mm x 229 mm)Dual PocketWSL-PK-6-9-XXSame size pocket as Roller 642 in. Flap (51 mm)(must be 3.5 in.pocket compatible)WSL-FLP-2-XX Attached to the hanger that is built into pocketUse 3 in. (76 mm) Flap for Dual Pocket1
Roller Shade Bracket and Lineal GuideSivoia QS and QS WirelessRoller 64BracketsTypeP/NPhotoNotesUniversal BracketsWIN-BRK-64UCan be affixed to wall, ceiling, or jambFascia BracketsWIN-BRK-64FBoth square and round fascia attach to this bracketDual BracketsWIN-BRK-64DJ GIH No fascia / top back cover availableMUST be added as a separate line item in the SCTKLinealsTypeP/N (Sample, XX color)PhotoNotesPlastic End Caps204 103 132 (white)Cleans the look of an exposed, universal bracket3.5 in. (89 mm)Fascia – SquareWSL-FSS-35-XXFascia, Top Back Cover, Pocket, found under“Add Line Item” “Trim” in the SCT3.5 in. (89 mm)Fascia – RoundWSL-FSR-35-XX3.5 in. (89 mm)Top Back CoverWSL-TB-35-XX3.5 in. (89 mm)PocketWSL-PK-35-XXSame size pocket as Roller 206 in. x 9 in.(152 mm x 229 mm)Dual PocketWSL-PK-6-9-XXSame size pocket as Roller 202 in. Flap(must be 3.5 in.pocket compatible)WSL-FLP-2-XXRound fascia only available for Roller 20 & 64 Attached to the hanger that is built into pocketUse 3 in. (76 mm) Flap for Dual Pocket2
Roller Shade Bracket and Lineal GuideSivoia QS and QS WirelessRoller 100, 150, 300 (each drive fits in a Roller 100 size tube)BracketsNote: Roller 100 brackets are a 2 piece system. The shade “bracket” is attached to the tube. The “sub bracket” is what comes with the hardware kit.TypeP/NJamb Bracket KitWIN-BRK-100JPhotoNotes Wall Bracket KitWIN-BRK-100WCeiling Bracket KitWIN-BRK-100CPocket Bracket KitWIN-BRK-100PFascia Bracket KitWIN-BRK-100FDual Bracket KitWIN-BRK-100DDo not try to put a ceiling bracket in pocket –Will not be able to tighten the set screwSquare fascia only Dual Narrow Bracket Kit WIN-BRK-100DN LinealsUniversal - can be mounted to both the window sideand room sideMUST be added as a separate line item in the SCTSlimmer profile than standard, Dual Bracket.MUST be added as a separate line item in the SCTFasciaTypeP/N (Sample, XX color)4 in. (102 mm)Fascia SquareWSL-FSS-4-XX4 in. (102 mm)Top Back CoverWSL-TB-4-XXFascia and top/back cover withside channel and sill angle5 in. (127 mm)PocketWSL-PK-5-XXFascia and top/back cover withside channel and sill angle7 in. x 11 in.(178 mm x 279 mm)Dual PocketWSL-7-11-XXPhotoTop back coverNotesOptionalend capFasciaTop back cover12 in. x 6 in.(305 mm x 152 mm)Dual Pocket3 in. (76 mm) FlapCan be affixed to wall, ceiling, or jambCannot be used in Lutron extruded pocketsOptionalend cap For roller shades mounted horizontallyDual bracket for this orientation does not existWSL-FLP-3-XX3
Roller Shade Bracket and Lineal GuideSivoia QS and QS WirelessRoller 225BracketsTypeP/NJamb Bracket KitWIN-BRK-225JPhotoNotesCan be affixed to wall, ceiling, or jambCCDEGLASS/ WALL SIDEDual Bracket KitWIN-BRK-225DMUST be added as a separate line item in the SCTLinealsTypeP/N (Sample, XX color)7 in. x 7 in.(178 mm x 178 mm)PocketWSL-PK-7-7-XX8 in. x 14 in.(203 mm x 356 mm)PocketWSL-PK-8-14-XX5 in. (127 mm)FlapWSL-FLP-5-XXPhotoNotes4
Roller Shade Bracket and Lineal GuideSivoia QS and QS WirelessAvailable for all Roller Shade TypesLinealsTypeP/N (Sample, XX color)3 in. (76 mm)Flush Mount HangerWSL-HGR-3-XX3 in. (76 mm)Hanger withoutTile SupportWSL-HGR-3S-XX3 in. (76 mm)Hanger withTile SupportWSL-HGR-3T-XX2.5 in. (64 mm)Side ChannelWSL-SC-25-XXSill AngleWSL-SA-1-XXPhotoNotes Used for a contractor-built pocket. A hanger isaffixed to the pocket so that flap can be applied toget a clean look from the underside of the shade.Note: Both the 3 in. hanger with and without tilesupport allow for a splice bar to be added whichjoins two pockets together (one would join twopockets together to get a longer pocket as custompocket length maxes out at 120 inches).Used to block light coming in from the bottom of thewindow for a complete blackoutHembarsExposed Hembar (with woolpile, 1 in. or 25 mm) Sealed Hembar (3/16 in. X 1 in. or 25 mm) Recommended for use in blackout applicationsNot available for fabrics that cannot be seamedNot recommended for use with dual-sided fabricsNot available for fabrics that cannot be seamedExposed Architectural Bottom BarHalf-Wrap Architectural Bottom BarDesigner HembarRecommended for use with dual-sided fabrics Not recommended for use with dual-sided fabricsNot available for fabrics that cannot be seamedLutron is a trademark of Lutron Electronics Co., Inc., registered in the U.S. and other countries. For a complete list of all Lutronregistered and common law trademarks, please visit lutron.com/trademarks.5 07/2018 Lutron Electronics Co., Inc. 368-2955 REV C
Pocket WSL-PK-5-XX 7 in. x 11 in. (178 mm x 279 mm) Dual Pocket WSL-7-11-XX 12 in. x 6 in. (305 mm x 152 mm) Dual Pocket For roller shades mounted horizontally Dual bracket for this orientation does not exist 3 in. (76 mm) Flap WSL-FLP-3-XX Roller 100, 150, 300 (each drive fits in a Roller 100 size tube) Roller Shade Bracket and Lineal .
