Transcription
USAGE GUIDELINESFOR THE SWIFT SLIDER: Repositioning Made SimpleSPECIFICATIONS SWIFT SLIDERSSTYLE NUMBEREnsure brakes of bed are onPlace pillow at head of bed to avoidaccidental head injuryPlace Swift on bed with low-frictiontaffeta panel down; place incontinencepad on top of Swift (if needed)Position patient/resident centrally onwhite Swift surface. The central panelshould support patient/resident fromneck to just below the buttocksBend patient/resident’s knees to protectheels from being dragged across linensWhen possible, bed height should be atcaregivers’ upper thigh levelThere should be a caregiver on each sideof bed. Each holds Swift with two hands- one at shoulder height and one at hipheightTo move patient/resident, gather Swiftas close as possible to patient/resident’sbody. Reposition by laterally shiftingbody weightOnce patient/resident is repositioned,smooth out sliding sheet and tuck flapssecurely under mattressFABRIC CONTENTDIMENSIONSWEIGHTAPPLICATIONPTD-45Backing: Dark blue taffeta40" x 72"(102 cm x 183 cm)15.9 oz (451 g)Designed to be used on its own,or with the standard size UltraSlide Bottom sheetPTD-5Backing: Light blue taffeta40" x 72"(102 cm x 183 cm)15.9 oz (451 g)Designed to be used on its own,or with the standard size UltraSlide Bottom sheetPTD-BA/YBacking: Yellow taffeta50" x 72"(127 cm x 183 cm)20.4 oz (579 g)Designed to be used on its own,or with a bariatric UltraSlide Bottom sheetPTD-31Backing: Orange taffeta40" x 54"(102 cm x 137 cm)11.8 oz (335 g)Designed to be used on its own,or with the stretcher UltraSlide Bottom sheetAlso available in an impermeable version (PTD-6)SPECIFICATIONS ULTRASLIDE BOTTOM SHEETSSTYLE NUMBERDIMENSIONSWEIGHTAPPLICATION21.2 oz (600 g)Designed forstandard size mattressesPTD-LS/SSheet: Ultra KnitCentral panel:Blue taffeta with carbon fibersWidth: 32" to 36" (81 to 91 cm)Length: 78" to 84" (198 to 213 cm)Depth: 4" to 8" (10 to 20 cm)PTD-LS/S/BA/YSheet: Ultra KnitCentral panel:Blue taffeta with carbon fibersWidth: 54" (137 cm)Length: 80" (203 cm)Depth: 8" (20 cm)Sheet: Ultra KnitCentral panel:Blue taffeta with carbon fibersWidth: 48" (122 cm)Length: 80" (203 cm)Depth: 7" (18 cm)Sheet: Ultra KnitCentral panel:Blue taffeta with carbon fibersWidth: 28” to 31” (71 to 79 cm)Length: 74” to 78” (188 to 198 cm)Depth: 3” to 5” (8 to 13 cm)PTD-LS/S/BA1/YPTD-LS/S/31Please remember: We strongly advise against usingSwift for liftingFABRIC CONTENTDesigned foroz (685 g)4 colour process:4 colour24.2process:bariatric mattressesBLUEC-91M-60Y-0K-0GREENC-100Designed for22 oz (625 g)M-0bariatric mattressesY-79K-27Designed for13.9 oz (394 g)stretcher mattressesMOVING IN THE RIGHT DIRECTION!245 rue EinsteinDollard-des-Ormeaux(Québec) H9A 3J2(514) 916-3462(514) 817-3555Info@IdeaDesignGraphique.comDOCUMENT INFORMATIONCLIENT: MIPDOCKET: 1902PROJECT NAME: SwiftFILE NAME:1902-MIP-SwiftBrochure-EN.inddDIMENSIONS: 25.375” x 11”4-COLOR PROCESSProcess CyanProcess MagentaProcess YellowProcess BlackDIELINEDIELINE - DO NOT PRINTFOLD LINE - DO NOT PRINTCOLORS ON SCREEN OR PRINTOUT MAY NOT BEREPRESENTATIVE. NO TRAPPING PROVIDED.MOVING IN THE RIGHT DIRECTION!FONTSCentury GothicPLACED IMAGESVERSION #1: September 19, 20134 colour process:4 colour process:BLUEC-91M-60Y-0K-0GREENC-100M-0Y-79K-27
Swift UltraSlide SystemMIP recognizes that manualrepositioning exposescaregivers to increased risk of neck,shoulder, and back injuries. That’s whywe have developed the Swift Slider, acost-effective, low-friction taffetarepositioner intended to allow caregiversto safely and easily perform handling taskswith little physical strain.Objective: To determine load/force required to move 200 lbs on a hospital bed using a fixedapparatus.BED SHEETStandard Bottom SheetImplementing the standard use of thisrepositioner will create a safer healthcareenvironment for caregivers, ensure thecomfort and security of patients/residents,and support your no-lift policy!UltraSlide Bottom Sheet Maximum Force % Average Force % t-60%-60%highest number of operational injuries related to backpain (National Institute for Occupational Safety AndHealth). In order to prevent such injuries, MIP hasdeveloped UltraSlide, a fitted bottom sheet modifiedwith a low-friction panel down the center, to be usedtogether with Swift. UltraSlide should be used whenpatients/residents have little or no mobility andrequire extensive or total assistance for repositioningin bed.Findings obtained from an independent laboratory study. Details available upon requestB R E AT H A B L EREPOSITIONERSwift’s thin profile should not impair theperformance of pressure redistributionmattresses, and can therefore remain beneathpatients/residents at all times – so it’s alwaysthere when you need it.FEATURES & BENEFITS: Quality surface specifically developedto provide patient/resident comfortand reduce the risk of shear andfrictionLow-friction backing allows staff toreposition patients/residents safelyand easilyBreathable taffeta backing avoidsheat buildup under patients/residentsGenerous sizing provides maximumsupportAvailable in an assortment of sizes tomeet the needs of a wider range ofpatients/residents and uses3.5Note: The Swift Slider can bewashed along withregular bed3.0linens.2.52.00.0Without SwiftBLUEC-91M-60Y-0K-0 of heat and moisture build-up under thepatient/resident, enhancing comfort.With Swift Male, 68 years old, 6’0 tall, 190 lbs., Back lie flatAverage pressure 18.84 Peak pressure 44.951200800CARBONFIBERS600400200GREENC-100Central low-friction panel significantly reducesM-0Y-79resistance when used in conjunction with SwiftK-27Carbon fibers reduce static build-upSpecial, stretch Ultra Knit construction provides asmooth surface and accommodates a wide rangeof healthcare mattress sizesDurable, 100% synthetic fabric ensures quickdrying and longevity in demanding environmentsProper use should significantly reduce the riskof neck, shoulder and back injuries caused byrepositioningAlso available in bariatric and stretcher sizesULTRASLIDESWIFT100000.5FEATURES & BENEFITS4 colour process:OF ULTRASLIDE: BREATHABILITY reduces the riskMinimumrequirement forbreathabilityMOISTURE VAPOR TRANSMISSION RATE (MVTR)/MOISTURE VAPOR PENETRATION RATE (MVPR)MVTR 1136 g/m2-24hrsUSAGE GUIDELINES FORSWIFT ULTRASLIDE SYSTEM:4 colour process:Male, 68 years old, 6’0 tall, 190 lbs., Back lie flatAverage pressure 18.02 Peak pressure 43.41.51.0Used individually or together, the two parts of theSwift UltraSlide System reduce the force required toturn or reposition bed-bound patients/residents.PRESSURE MAPPINGGRAMS/SQUARE METER/24 HOURS Facilities dealing with staff injuriesto arm/shoulder or back, as a resultof lifting or repositioning patients/residentsPersonnel using bedpads to repositionpatients/residentsPatients/residents not fully benefitingfrom the desired effects of theirpressure redistribution surfaces due tounnecessary layering of productsPatients/residents requiring assistancewith bed mobilityHealthcare facilities with budgetaryconstraintsItemore than any other occupation orConclusion: Swift UltraSlide System reduces the force required to reposition a patient/residentin bed by 60%, therefore reducing the overall strain on the caregiver.SLIDERWho is Swift for? M industry, nursing personnel file for theLOAD FORCE TEST (Lab & Hospital Tested)SWIFTBACKINGSWIFTSURFACE Place UltraSlide over mattress, as you woulda normal fitted sheetPlace Swift across UltraSlide, with blue sidesfacing each otherPosition Swift so that it supports shoulder tohip areaReposition patient/resident usingappropriate protocol (refer to usageguidelines for Swift)Once you’ve positioned patient/resident’ships to appropriate area, tuck in Swift tokeep it from slidingNote: If head of bed needs to be elevated, raiseknee gatch to prevent patient/resident fromsliding down mattress Position patient/resident’s hips in bend ofbed. If hips go above that zone, patient/resident will slide down by force of gravity
USAGE GUIDELINESFOR THE SWIFT SLIDER: Repositioning Made SimpleSPECIFICATIONS SWIFT SLIDERSSTYLE NUMBEREnsure brakes of bed are onPlace pillow at head of bed to avoidaccidental head injuryPlace Swift on bed with low-frictiontaffeta panel down; place incontinencepad on top of Swift (if needed)Position patient/resident centrally onwhite Swift surface. The central panelshould support patient/resident fromneck to just below the buttocksBend patient/resident’s knees to protectheels from being dragged across linensWhen possible, bed height should be atcaregivers’ upper thigh levelThere should be a caregiver on each sideof bed. Each holds Swift with two hands- one at shoulder height and one at hipheightTo move patient/resident, gather Swiftas close as possible to patient/resident’sbody. Reposition by laterally shiftingbody weightOnce patient/resident is repositioned,smooth out sliding sheet and tuck flapssecurely under mattressFABRIC CONTENTDIMENSIONSWEIGHTAPPLICATIONPTD-45Backing: Dark blue taffeta40" x 72"(102 cm x 183 cm)15.9 oz (451 g)Designed to be used on its own,or with the standard size UltraSlide Bottom sheetPTD-5Backing: Light blue taffeta40" x 72"(102 cm x 183 cm)15.9 oz (451 g)Designed to be used on its own,or with the standard size UltraSlide Bottom sheetPTD-BA/YBacking: Yellow taffeta50" x 72"(127 cm x 183 cm)20.4 oz (579 g)Designed to be used on its own,or with a bariatric UltraSlide Bottom sheetPTD-31Backing: Orange taffeta40" x 54"(102 cm x 137 cm)11.8 oz (335 g)Designed to be used on its own,or with the stretcher UltraSlide Bottom sheetAlso available in an impermeable version (PTD-6)SPECIFICATIONS ULTRASLIDE BOTTOM SHEETSSTYLE NUMBERDIMENSIONSWEIGHTAPPLICATION21.2 oz (600 g)Designed forstandard size mattressesPTD-LS/SSheet: Ultra KnitCentral panel:Blue taffeta with carbon fibersWidth: 32" to 36" (81 to 91 cm)Length: 78" to 84" (198 to 213 cm)Depth: 4" to 8" (10 to 20 cm)PTD-LS/S/BA/YSheet: Ultra KnitCentral panel:Blue taffeta with carbon fibersWidth: 54" (137 cm)Length: 80" (203 cm)Depth: 8" (20 cm)Sheet: Ultra KnitCentral panel:Blue taffeta with carbon fibersWidth: 48" (122 cm)Length: 80" (203 cm)Depth: 7" (18 cm)Sheet: Ultra KnitCentral panel:Blue taffeta with carbon fibersWidth: 28” to 31” (71 to 79 cm)Length: 74” to 78” (188 to 198 cm)Depth: 3” to 5” (8 to 13 cm)PTD-LS/S/BA1/YPTD-LS/S/31Please remember: We strongly advise against usingSwift for liftingFABRIC CONTENTDesigned foroz (685 g)4 colour process:4 colour24.2process:bariatric mattressesBLUEC-91M-60Y-0K-0GREENC-100Designed for22 oz (625 g)M-0bariatric mattressesY-79K-27Designed for13.9 oz (394 g)stretcher mattressesMOVING IN THE RIGHT DIRECTION!245 rue EinsteinDollard-des-Ormeaux(Québec) H9A 3J2(514) 916-3462(514) 817-3555Info@IdeaDesignGraphique.comDOCUMENT INFORMATIONCLIENT: MIPDOCKET: 1902PROJECT NAME: SwiftFILE NAME:1902-MIP-SwiftBrochure-EN.inddDIMENSIONS: 25.375” x 11”4-COLOR PROCESSProcess CyanProcess MagentaProcess YellowProcess BlackDIELINEDIELINE - DO NOT PRINTFOLD LINE - DO NOT PRINTCOLORS ON SCREEN OR PRINTOUT MAY NOT BEREPRESENTATIVE. NO TRAPPING PROVIDED.MOVING IN THE RIGHT DIRECTION!FONTSCentury GothicPLACED IMAGESVERSION #1: September 19, 20134 colour process:4 colour process:BLUEC-91M-60Y-0K-0GREENC-100M-0Y-79K-27
Swift UltraSlide SystemMIP recognizes that manualrepositioning exposescaregivers to increased risk of neck,shoulder, and back injuries. That’s whywe have developed the Swift Slider, acost-effective, low-friction taffetarepositioner intended to allow caregiversto safely and easily perform handling taskswith little physical strain.Objective: To determine load/force required to move 200 lbs on a hospital bed using a fixedapparatus.BED SHEETStandard Bottom SheetImplementing the standard use of thisrepositioner will create a safer healthcareenvironment for caregivers, ensure thecomfort and security of patients/residents,and support your no-lift policy!UltraSlide Bottom Sheet Maximum Force % Average Force % t-60%-60%highest number of operational injuries related to backpain (National Institute for Occupational Safety AndHealth). In order to prevent such injuries, MIP hasdeveloped UltraSlide, a fitted bottom sheet modifiedwith a low-friction panel down the center, to be usedtogether with Swift. UltraSlide should be used whenpatients/residents have little or no mobility andrequire extensive or total assistance for repositioningin bed.Findings obtained from an independent laboratory study. Details available upon requestB R E AT H A B L EREPOSITIONERSwift’s thin profile should not impair theperformance of pressure redistributionmattresses, and can therefore remain beneathpatients/residents at all times – so it’s alwaysthere when you need it.FEATURES & BENEFITS: Quality surface specifically developedto provide patient/resident comfortand reduce the risk of shear andfrictionLow-friction backing allows staff toreposition patients/residents safelyand easilyBreathable taffeta backing avoidsheat buildup under patients/residentsGenerous sizing provides maximumsupportAvailable in an assortment of sizes tomeet the needs of a wider range ofpatients/residents and uses3.5Note: The Swift Slider can bewashed along withregular bed3.0linens.2.52.00.0Without SwiftBLUEC-91M-60Y-0K-0 of heat and moisture build-up under thepatient/resident, enhancing comfort.With Swift Male, 68 years old, 6’0 tall, 190 lbs., Back lie flatAverage pressure 18.84 Peak pressure 44.951200800CARBONFIBERS600400200GREENC-100Central low-friction panel significantly reducesM-0Y-79resistance when used in conjunction with SwiftK-27Carbon fibers reduce static build-upSpecial, stretch Ultra Knit construction provides asmooth surface and accommodates a wide rangeof healthcare mattress sizesDurable, 100% synthetic fabric ensures quickdrying and longevity in demanding environmentsProper use should significantly reduce the riskof neck, shoulder and back injuries caused byrepositioningAlso available in bariatric and stretcher sizesULTRASLIDESWIFT100000.5FEATURES & BENEFITS4 colour process:OF ULTRASLIDE: BREATHABILITY reduces the riskMinimumrequirement forbreathabilityMOISTURE VAPOR TRANSMISSION RATE (MVTR)/MOISTURE VAPOR PENETRATION RATE (MVPR)MVTR 1136 g/m2-24hrsUSAGE GUIDELINES FORSWIFT ULTRASLIDE SYSTEM:4 colour process:Male, 68 years old, 6’0 tall, 190 lbs., Back lie flatAverage pressure 18.02 Peak pressure 43.41.51.0Used individually or together, the two parts of theSwift UltraSlide System reduce the force required toturn or reposition bed-bound patients/residents.PRESSURE MAPPINGGRAMS/SQUARE METER/24 HOURS Facilities dealing with staff injuriesto arm/shoulder or back, as a resultof lifting or repositioning patients/residentsPersonnel using bedpads to repositionpatients/residentsPatients/residents not fully benefitingfrom the desired effects of theirpressure redistribution surfaces due tounnecessary layering of productsPatients/residents requiring assistancewith bed mobilityHealthcare facilities with budgetaryconstraintsItemore than any other occupation orConclusion: Swift UltraSlide System reduces the force required to reposition a patient/residentin bed by 60%, therefore reducing the overall strain on the caregiver.SLIDERWho is Swift for? M industry, nursing personnel file for theLOAD FORCE TEST (Lab & Hospital Tested)SWIFTBACKINGSWIFTSURFACE Place UltraSlide over mattress, as you woulda normal fitted sheetPlace Swift across UltraSlide, with blue sidesfacing each otherPosition Swift so that it supports shoulder tohip areaReposition patient/resident usingappropriate protocol (refer to usageguidelines for Swift)Once you’ve positioned patient/resident’ships to appropriate area, tuck in Swift tokeep it from slidingNote: If head of bed needs to be elevated, raiseknee gatch to prevent patient/resident fromsliding down mattress Position patient/resident’s hips in bend ofbed. If hips go above that zone, patient/resident will slide down by force of gravity
Swift UltraSlide SystemMIP recognizes that manualrepositioning exposescaregivers to increased risk of neck,shoulder, and back injuries. That’s whywe have developed the Swift Slider, acost-effective, low-friction taffetarepositioner intended to allow caregiversto safely and easily perform handling taskswith little physical strain.Objective: To determine load/force required to move 200 lbs on a hospital bed using a fixedapparatus.BED SHEETStandard Bottom SheetImplementing the standard use of thisrepositioner will create a safer healthcareenvironment for caregivers, ensure thecomfort and security of patients/residents,and support your no-lift policy!UltraSlide Bottom Sheet Maximum Force % Average Force % t-60%-60%highest number of operational injuries related to backpain (National Institute for Occupational Safety AndHealth). In order to prevent such injuries, MIP hasdeveloped UltraSlide, a fitted bottom sheet modifiedwith a low-friction panel down the center, to be usedtogether with Swift. UltraSlide should be used whenpatients/residents have little or no mobility andrequire extensive or total assistance for repositioningin bed.Findings obtained from an independent laboratory study. Details available upon requestB R E AT H A B L EREPOSITIONERSwift’s thin profile should not impair theperformance of pressure redistributionmattresses, and can therefore remain beneathpatients/residents at all times – so it’s alwaysthere when you need it.FEATURES & BENEFITS: Quality surface specifically developedto provide patient/resident comfortand reduce the risk of shear andfrictionLow-friction backing allows staff toreposition patients/residents safelyand easilyBreathable taffeta backing avoidsheat buildup under patients/residentsGenerous sizing provides maximumsupportAvailable in an assortment of sizes tomeet the needs of a wider range ofpatients/residents and uses3.5Note: The Swift Slider can bewashed along withregular bed3.0linens.2.52.00.0Without SwiftBLUEC-91M-60Y-0K-0 of heat and moisture build-up under thepatient/resident, enhancing comfort.With Swift Male, 68 years old, 6’0 tall, 190 lbs., Back lie flatAverage pressure 18.84 Peak pressure 44.951200800CARBONFIBERS600400200GREENC-100Central low-friction panel significantly reducesM-0Y-79resistance when used in conjunction with SwiftK-27Carbon fibers reduce static build-upSpecial, stretch Ultra Knit construction provides asmooth surface and accommodates a wide rangeof healthcare mattress sizesDurable, 100% synthetic fabric ensures quickdrying and longevity in demanding environmentsProper use should significantly reduce the riskof neck, shoulder and back injuries caused byrepositioningAlso available in bariatric and stretcher sizesULTRASLIDESWIFT100000.5FEATURES & BENEFITS4 colour process:OF ULTRASLIDE: BREATHABILITY reduces the riskMinimumrequirement forbreathabilityMOISTURE VAPOR TRANSMISSION RATE (MVTR)/MOISTURE VAPOR PENETRATION RATE (MVPR)MVTR 1136 g/m2-24hrsUSAGE GUIDELINES FORSWIFT ULTRASLIDE SYSTEM:4 colour process:Male, 68 years old, 6’0 tall, 190 lbs., Back lie flatAverage pressure 18.02 Peak pressure 43.41.51.0Used individually or together, the two parts of theSwift UltraSlide System reduce the force required toturn or reposition bed-bound patients/residents.PRESSURE MAPPINGGRAMS/SQUARE METER/24 HOURS Facilities dealing with staff injuriesto arm/shoulder or back, as a resultof lifting or repositioning patients/residentsPersonnel using bedpads to repositionpatients/residentsPatients/residents not fully benefitingfrom the desired effects of theirpressure redistribution surfaces due tounnecessary layering of productsPatients/residents requiring assistancewith bed mobilityHealthcare facilities with budgetaryconstraintsItemore than any other occupation orConclusion: Swift UltraSlide System reduces the force required to reposition a patient/residentin bed by 60%, therefore reducing the overall strain on the caregiver.SLIDERWho is Swift for? M industry, nursing personnel file for theLOAD FORCE TEST (Lab & Hospital Tested)SWIFTBACKINGSWIFTSURFACE Place UltraSlide over mattress, as you woulda normal fitted sheetPlace Swift across UltraSlide, with blue sidesfacing each otherPosition Swift so that it supports shoulder tohip areaReposition patient/resident usingappropriate protocol (refer to usageguidelines for Swift)Once you’ve positioned patient/resident’ships to appropriate area, tuck in Swift tokeep it from slidingNote: If head of bed needs to be elevated, raiseknee gatch to prevent patient/resident fromsliding down mattress Position patient/resident’s hips in bend ofbed. If hips go above that zone, patient/resident will slide down by force of gravity
USAGE GUIDELINESFOR THE SWIFT SLIDER: Repositioning Made SimpleSPECIFICATIONS SWIFT SLIDERSSTYLE NUMBEREnsure brakes of bed are onPlace pillow at head of bed to avoidaccidental head injuryPlace Swift on bed with low-frictiontaffeta panel down; place incontinencepad on top of Swift (if needed)Position patient/resident centrally onwhite Swift surface. The central panelshould support patient/resident fromneck to just below the buttocksBend patient/resident’s knees to protectheels from being dragged across linensWhen possible, bed height should be atcaregivers’ upper thigh levelThere should be a caregiver on each sideof bed. Each holds Swift with two hands- one at shoulder height and one at hipheightTo move patient/resident, gather Swiftas close as possible to patient/resident’sbody. Reposition by laterally shiftingbody weightOnce patient/resident is repositioned,smooth out sliding sheet and tuck flapssecurely under mattressFABRIC CONTENTDIMENSIONSWEIGHTAPPLICATIONPTD-45Backing: Dark blue taffeta40" x 72"(102 cm x 183 cm)15.9 oz (451 g)Designed to be used on its own,or with the standard size UltraSlide Bottom sheetPTD-5Backing: Light blue taffeta40" x 72"(102 cm x 183 cm)15.9 oz (451 g)Designed to be used on its own,or with the standard size UltraSlide Bottom sheetPTD-BA/YBacking: Yellow taffeta50" x 72"(127 cm x 183 cm)20.4 oz (579 g)Designed to be used on its own,or with a bariatric UltraSlide Bottom sheetPTD-31Backing: Orange taffeta40" x 54"(102 cm x 137 cm)11.8 oz (335 g)Designed to be used on its own,or with the stretcher UltraSlide Bottom sheetAlso available in an impermeable version (PTD-6)SPECIFICATIONS ULTRASLIDE BOTTOM SHEETSSTYLE NUMBERDIMENSIONSWEIGHTAPPLICATION21.2 oz (600 g)Designed forstandard size mattressesPTD-LS/SSheet: Ultra KnitCentral panel:Blue taffeta with carbon fibersWidth: 32" to 36" (81 to 91 cm)Length: 78" to 84" (198 to 213 cm)Depth: 4" to 8" (10 to 20 cm)PTD-LS/S/BA/YSheet: Ultra KnitCentral panel:Blue taffeta with carbon fibersWidth: 54" (137 cm)Length: 80" (203 cm)Depth: 8" (20 cm)Sheet: Ultra KnitCentral panel:Blue taffeta with carbon fibersWidth: 48" (122 cm)Length: 80" (203 cm)Depth: 7" (18 cm)Sheet: Ultra KnitCentral panel:Blue taffeta with carbon fibersWidth: 28” to 31” (71 to 79 cm)Length: 74” to 78” (188 to 198 cm)Depth: 3” to 5” (8 to 13 cm)PTD-LS/S/BA1/YPTD-LS/S/31Please remember: We strongly advise against usingSwift for liftingFABRIC CONTENTDesigned foroz (685 g)4 colour process:4 colour24.2process:bariatric mattressesBLUEC-91M-60Y-0K-0GREENC-100Designed for22 oz (625 g)M-0bariatric mattressesY-79K-27Designed for13.9 oz (394 g)stretcher mattressesMOVING IN THE RIGHT DIRECTION!245 rue EinsteinDollard-des-Ormeaux(Québec) H9A 3J2(514) 916-3462(514) 817-3555Info@IdeaDesignGraphique.comDOCUMENT INFORMATIONCLIENT: MIPDOCKET: 1902PROJECT NAME: SwiftFILE NAME:1902-MIP-SwiftBrochure-EN.inddDIMENSIONS: 25.375” x 11”4-COLOR PROCESSProcess CyanProcess MagentaProcess YellowProcess BlackDIELINEDIELINE - DO NOT PRINTFOLD LINE - DO NOT PRINTCOLORS ON SCREEN OR PRINTOUT MAY NOT BEREPRESENTATIVE. NO TRAPPING PROVIDED.MOVING IN THE RIGHT DIRECTION!FONTSCentury GothicPLACED IMAGESVERSION #1: September 19, 20134 colour process:4 colour process:BLUEC-91M-60Y-0K-0GREENC-100M-0Y-79K-27
CLIENT: MIP DOCKET: 1902 PROJECT NAME: Swift FILE NAME: 1902-MIP-SwiftBrochure-EN.indd _ DIMENSIONS: 25.375" x 11" _ 4-COLOR PROCESS Process Cyan Process Magenta Process Yellow Process Black DIELINE DIELINE - DO NOT PRINT FOLD LINE - DO NOT PRINT COLORS ON SCREEN OR PRINTOUT MAY NOT BE
