Transcription
1Viscosity - Flow Cupselcometer.com
Viscosity - Flow CupsViscosity Flow CupsElcometer 2350 & 2354Viscosity Flow Cups are very easy to use instruments made of anodized aluminiumwith a stainless steel orifice, for measuring the consistency of paints, varnishesand similar products. The measured kinematic viscosity is generally expressed inseconds(s) flow time. If the Standards stipulate conversion methods the flow timecan be converted into Centistokes (cSt) using the Elcometer ElcoCalc MobileApp.Calibration certificates which offer traceability and assurance that each viscositycup has been individually tested and comply to Standards are also available.The cups can be supplied separately or with an adjustable stand which includes aprecision level and an overflow glass draw plate. They can also be supplied with aflow jacket for temperature control (thermojacket), see page 5 for more information.STANDARDS:ISO: ISO 2431AS/NZS: AS/NZS 1580.214.2 (cup 4),AS/NSZ 1580.214.6:1995BS: BS 3900-A6:1971FORD/ASTM: ASTM D 1200, D 5125DIN: DIN 53211 (cup 4)AFNOR: NF T30-014compatible withElcoCalc CTechnical SpecificationPart ter 2354/3 BS Viscosity Cup 43.97mm89 - 340 K0002354M004Elcometer 2354/4 BS Viscosity Cup 54.76mm79 - 441 K0002354M003CElcometer 2354/3 with calibration certificate3.97mm89 - 340 (e)K0002354M004CElcometer 2354/4 with calibration certificate4.76mm79 - 441 eBS Viscosity Flow CupsDIN Viscosity CupsPart Number1Range1(cSt)CertificateK0002350M001Elcometer 2350/1 DIN Viscosity Cup 22mm-K0002350M002Elcometer 2350/2 DIN Viscosity Cup 44mm96 - 683K0002350M003Elcometer 2350/3 DIN Viscosity Cup 66mm-K0002350M004Elcometer 2350/4 DIN Viscosity Cup 88mm-K0002350M001CElcometer 2350/1 with calibration certificate2mm- (d)K0002350M002CElcometer 2350/2 with calibration certificate4mm96 - 683 (e)K0002350M003CElcometer 2350/3 with calibration certificate6mm- (d)K0002350M004CElcometer 2350/4 with calibration certificate8mm- (d)For Information Only(d) Dimensional Certificate Calibration Certificate supplied as standard.2 (e) Efflux Time CertificateBatch Calibration Certificate supplied as standard.
Viscosity - Flow CupsViscosity Flow CupsElcometer 2351, 2352 & 2353CTechnical Elcometer 2353/1 ISO Viscosity Cup 33mm7 - 42 K0002353M002Elcometer 2353/2 ISO Viscosity Cup 44mm34 - 135 K0002353M003Elcometer 2353/3 ISO Viscosity Cup 55mm91 - 326 K0002353M004Elcometer 2353/4 ISO Viscosity Cup 66mm188 - 684 K0002353M005Elcometer 2353/5 ISO Viscosity Cup 88mm-K0002353M001CElcometer 2353/1 with calibration certificate3mm7 - 42 (e)K0002353M002CElcometer 2353/2 with calibration certificate4mm34 - 135 (e)K0002353M003CElcometer 2353/3 with calibration certificate5mm91 - 326 (e)K0002353M004CElcometer 2353/4 with calibration certificate6mm188 - 684 (e)K0002353M005CElcometer 2353/5 with calibration certificate8mm- (d)ISO Viscosity Flow CupsPart NumberDescriptionK0002353M001Part cateK0002351M001Elcometer 2351/1 FORD/ASTM Viscosity Cup 11.90mm10 - 35 K0002351M002Elcometer 2351/2 FORD/ASTM Viscosity Cup 22.53mm25 - 120 K0002351M003Elcometer 2351/3 FORD/ASTM Viscosity Cup 33.40mm49 - 220 K0002351M004Elcometer 2351/4 FORD/ASTM Viscosity Cup 44.12mm70 - 370 K0002351M005Elcometer 2351/5 FORD/ASTM Viscosity Cup 55.20mm200 - 1200 K0002351M001CElcometer 2351/1 with calibration certificate1.90mm10 - 35 (e)K0002351M002CElcometer 2351/2 with calibration certificate2.53mm25 - 120 (e)K0002351M003CElcometer 2351/3 with calibration certificate3.40mm49 - 220 (e)K0002351M004CElcometer 2351/4 with calibration certificate4.12mm70 - 370 (e)K0002351M005CElcometer 2351/5 with calibration certificate5.20mm200 - 1200 (e)CertificateFORD/ASTM Viscosity CupsPart Elcometer 2352/1 AFNOR Viscosity Cup 2.52.46mm5 - 140K0002352M002Elcometer 2352/2 AFNOR Viscosity Cup 44mm50 - 1100K0002352M003Elcometer 2352/3 AFNOR Viscosity Cup 66mm510 - 5100K0002352M001CElcometer 2352/1 with calibration certificate2.46mm5 - 140 (d)K0002352M002CElcometer 2352/2 with calibration certificate4mm50 - 1100 (d)K0002352M003CElcometer 2352/3 with calibration certificate6mm510 - 5100 (d)AFNOR Viscosity CupsViscosity Flow Cups - Cup Designselcometer.com3
Viscosity CupsViscosity Cup Conversioncompatible withElcoCalc The table below lists the major flow cup types together with a conversion chart of EffluxTime (in seconds) to Viscosity in Centistokes (cSt). It has been constructed from the variousInternational Standard Calculators.Each cup design is unique, care must be taken when comparing viscosity values betweendifferent cup types. These values are the absolute values and do not include the allowedtolerances, as these differ considerably between each of the Standards.Viscosity Cup ORD / 4329853989156181094395921012 0564091160191124506071035 31264293164201164626221058 31974396168211194746361081 05447251219 3691053112194291445567401242 3761055114198301475677551265 3831156116202311515797701288 3901158119206321545917841311 10.2 1259121210331586037991334 10.4 1260123214341616148141357 10.6 68135233401796738881472 11.8 775147252451967319621587 12.9 0821582715121479010361702 14.0 2891702915623184811101817 15.1 259618131061.624990711841932 16.3 271041933296726696512582047 17.4 43211821636878301108214062277 19.7 13223940689336119915542507 21.9 147262445100371131617022737 24.2 161285483111406143318502967 26.4 176308522122441155019983197 28.7 6190331560133476166721463427 31.0 83.52235149692422All measurements are in Centistokes (cSt). Centipoise (cP) cSt x product density4
Viscosity - Flow CupsViscosity Flow Cup ty Cup Stand with Bubble Level and Glass Draw PlateKT002400N001Viscosity Cup Precision Stand with Bubble Level and Glass Draw PlateKT002400P001Bubble Level for Viscosity CupKT002400P999Viscosity Glass Draw PlateKT002400N202Viscosity Cup Precision Stand with ThermojacketKT002400N002Thermojacket for Viscosity Cup Precision StandK0007300M201Elcometer 7300 High Precision StopwatchKT002400N003Elcometer 2400 Conversion DiscTo ensure the viscosity cup is positioned correctly to carry out the test.To ensure the viscosity cup is positioned correctly to carry out the test.To ensure the viscosity cup is parallel to the surface.To retain test sample until operator is ready to commence test and provides surface for bubble level.For heating test samples for viscosity measurement at specific elevated temperatures.Allowing viscosity (cSt) and flow times of different cups to be calculated.Front: No.4 cups according to AFNOR, BS, NF, ASTM, DIN, Zahn 2Back: No.3-4-5-6 cups according to ISO and Zahn 3ThermometersTo accurately measure flow for viscosity the temperature needs to be 23 C 2 C(73.4 F). Here are a range of thermometers from 390-Spirit Thermometer in CSpirit Thermometer in FElcometer 212 Digital Pocket Thermometer ( C/ F) with Liquid ProbeElcometer 213/2 Digital Thermometer ( C/ F)Elcometer 213/2 Liquid ProbeFor a full range of Certified Calibration Oils see page 6elcometer.com5
Viscosity - Standard Calibration OilsElcometer 2410Elcometer Viscosity Cup Standard Calibration OilsIn order to check the viscosity cup’s calibration or to certify it for ISO purposes, it isimperative that viscosity cup standard calibration oils are used.Standard oils have a specific drain time, dependent upon the viscosity cup type(Ford, Shell, Zahn etc.) and the orifice or cup number used.To check the viscosity cup, use the standard viscosity oils in place of the liquid andmeasure the drain time.Specific calibration oils can only be used with specific flow cups. Please use thetable below to determine which calibration oil is required for your cup, or contactElcometer. Viscosity oils are supplied in ½ litre (1 pint) bottles.CTechnical SpecificationFlow Cups†ASTM/FORDISOKinematic Viscosity at25 C (77 F)†Certificate2334cSt 434120cSt 446230cSt 6460cSt Certified Calibration Oil850cSt Certified Calibration Oil1600cSt Part NumberDescriptionDINK0002410M021Certified Calibration OilK0002410M022Certified Calibration OilK0002410M023Certified Calibration OilK0002410M024Certified Calibration Oil4K0002410M025K0002410M026Nominal Value Calibration certificate supplied as standard.ENGLANDFRANCEGERMANYElcometer LimitedManchester M43 6BUTel: 44 (0)161 371 6000Fax: 44 (0)161 371 6010sales@elcometer.comElcometer SarlTel: 33 (0)2 38 86 33 44Fax: 33 (0)2 38 91 37 66fr info@elcometer.comwww.elcometer.frElcometer Instruments GmbHTel: 49(0)7361 52806 0Fax: 49(0)7361 52806 77de info@elcometer.comwww.elcometer.deTHE NETHERLANDSJAPANREPUBLIC OF SINGAPOREElcometer B.V.Elcometer KKTel: 81-(0)3-6869-0770Fax: 81-(0)3-6433-1220jp info@elcometer.comwww.elcometer.jpElcometer (Asia) Pte LtdTel: 65 6462 2822Fax: 65 6462 ITED ARAB EMIRATESMICHIGANElcometer IncTel: 1 248 650 0500Toll Free: 800 521 0635Fax: 1 248 650 er of HoustonTel: 1 713 450 0631Toll Free: 800 521 0635Fax: 1 713 450 0632inc@elcometer.comwww.elcometer.comEL Inspection & BlastingEquipment LLCTel: 971 4 295 0191Fax: 971 4 295 0192uae sales@elcometer.comwww.elcometer.aeTel: 31 (0)30 259 1818Fax: 31 (0)30 210 6666nl m Elcometer Limited, 2019. All rights reserved. No part of this document may be reproduced, transmitted, stored (in a retrieval system or otherwise), or translated into any language, in any form, or by any means, without the prior writtenpermission of Elcometer Limited.6Due to our policy of continuous improvement, Elcometer Limited reserves the right to change specifications without notice.
2 elcometer.com 3 Viscosity - Flow Cups 1 For Information Only (d) Dimensional Certificate (e) Efflux Time Certificate Calibration Certificate supplied as standard. Batch Calibration Certificate supplied as standard. Viscosity Flow Cups Viscosity Flow Cups are very easy to use instruments made of anodized aluminium with a stainless steel orifice, for measuring the consistency of paints, varnishes
