WIXLIB

5615 E. Powhatan Ave Tampa, FL 33610 (813) 971-4700 (800) 966-7753 Fax: (813) 977-56325615 E. Powhatan Ave Tampa, FL 33610 (813) 971-4700 (800) 966-7753 Fax: (813) 977-5632Astragals and ThresholdsDLP Industries New Stainable Aluminum AstragalDLP Industries, Inc. is proud to introduce our new stainable aluminum astragal. Our new painting process was formulated specifically for DLP and allows for our product to be top-coated to match your doors using an oil-based stain,a latex paint, or an oil-based paint. As always, our aluminum astragals continue to maintain Florida Building CodeCompliance.Staining Instructions:The door and Astragal should be stained as one1. Wipe down the door and astragal with acetone to remove any contaminates or oil.2. Allow acetone to dry, then tape off or remove the trim strips and hardware that’s installed into theastragal in preparation for applying the stain.3. Apply an oil-based interior wiping stain using a chip brush. Apply the stain in light coats, following the grain ofyour door. Once each coast becomes tacky, brush it using your chip brush to create the effect of wood grain.Let each coat dry thoroughly before applying the next, making sure to apply at least 2 coats.4. Once your stain has fully cured, apply a SPAR Varnish for protection from the elements.Follow the manufacturers’ suggestions for this application.U.S. Patents Pending

Toggle lock technologyDLP Industries Aluminum Astragalprovides the ultimate securityproviding simple and smoothoperation and eliminates theability of unlocking the astragalfrom the outside.Feel safe and secure with the DLP Aluminum Astragal between your doors. We believe that the home is a safe haven andevery astragal that DLP manufactures is made to produce the highest design pressures possible for Florida Building Codeand HVHZ Compliance. We do not need a separate “Hurricane Kit” to increase our design pressure as all of our astragalsare assembled in the exact same fashion. We at DLP strive to maintain a quality, high-performance product while keepingthe cost to a minimum. Our patented locking system and installation methods make for the easiest and most cost effectivesystem in the industry.Custom Preps All Astragals are cut to each customer’s door specifications. For added strength and security we notch the ends of ourastragal to mate with each customer’s header and sill Multi-point lock preps are availableAll aluminum astragal bodyencapsulates the inactive door, comesfully prepped to each customer’s doorspecs and is installed in minutes.DLP Industries ThresholdsFlush screw bossesFor security and weather protection. Florida Building Code compliant Available in aluminum, bronze, bright gold, and oak Many style specifications availableprovided can be used withoutstrike plates or have the ability toreceive the strike plates suppliedwith your dead-bolt and doorknob lock sets.2” bolt throw and a 4” aluminum stiffenerfor added security and design pressures.Security Strip is optional for outswing applications providing added securityand eliminating the reveal between the doors for a clean finished appearance.Specially formulated headerand sill boots are fused to the endsof the astragal providing ultimate protection against water infiltration.Header Strike Plate receives the slide boltis supplied with every astragal to reinforce theheader and eliminate blow out.26 inch slide bolt allowsfor easy operation of the lockingmechanisms without the need fora stool or ladder to reach the lock.Sill bolt receiver providesprotection against water infiltrationas well as a finished appearance.New Stainable Aluminum Finish(Formulated by DLP)Also available in White and BronzeUS PATENT # 7.513.539

Company ProfileThanks for taking time to look through our catalog.Since 1974, DLP Industries has become a major supplier of quality door components. Although ourconcentration has been on supplying customers in the Southeastern states, our product quality andprompt service has earned us many loyal customers nationwide.This catalog represents only the standard door component items that we manufacture. If you should havethe need for a special component, we have the capability to manufacture custom parts in our tooling andstamping facility.At DLP Industries we pride ourselves on producing the highest quality components on the market.We truly believe quality pays off in the long run for both us and you, the customer.We know how important prompt, efficient service is to our customers. We maintain an extensiveinventory of component items as well as the materials to manufacture the custom “made to ordercomponents” that we sell.We appreciate this opportunity to show you our products and would like to have the opportunity toinclude you among our many satisfied and valued customers.With best regards,David L. Phipps, PresidentDLP INDUSTRIES, INC.15615 E. Powhatan Ave Tampa, FL 33610(813) 971-4700 (800) 966-7753 Fax: (813) 977-5632

Astragal Ordering InformationUS PATENT # 7.513.539Color Availability: White, Bronze or Stainable AluminumPackage Quantity: 6Standard Notch Header: 5/8”Standard Notch Sill: 1”Standard 6’8”: 79 5/16”Standard 8’0”: 95 5/16”*(Lengths and Notches can be ordered to your specifications)*(No notch is required for inswing sill)Handed: LOS,LIS,ROS,RISPLEASE NOTE: Astragal handing isordered OPPOSITE of your active door.Astragal Security StripFeatures InactiveActiveFor use on outswing doorsCovers all locking mechanisms on outswing doorsFills any gaps that may occur due to improper door hangingAll aluminum constructionComes complete with predrilled holes and notched fordeadbolt and door knobColor Availibility: White*(Length and Notch to be specified when ordered)InactiveActivePLEASE NOTE: Security strip handingis ordered SAME as the Astragal.(Example: LOS Astagal LefthandSecurity Strip).*** (Make sure to add 1/4 inch toyour header/sill stop notchmeasurement for rubber boot)Security Strip is optional for outswing applications providing added security and eliminating the reveal between the doors for aclean finished appearance.325615 E. Powhatan Ave Tampa, FL 33610(813) 971-4700 (800) 966-7753 Fax: (813) 977-56325615 E. Powhatan Ave Tampa, FL 33610(813) 971-4700 (800) 966-7753 Fax: (813) 977-5632

Astragal Replacement Hardware SetASTHWWood AstragalWood Interior T-astragal for 1 3/8” double doorsHardware Bag for “White” Astragals2- Stiffeners4- Boots (1 ea. – LIS, LOS, RIS, ROS)1- Small Glue Bottle2- Screw Bosses w/Screws (4)20- #8 screws1- Header/Sill PlateOptions:Finger joint or clear pine6’8” or 8’With slide-bolt prep or without slide-bolt prepASTBHW*** 8’ Astragal is ordered left or righthand and opposite of the active door.(Ex. Left hand active door Righthand astragal)Hardware Bag for “Bronze” Astragals2- Stiffeners4- Boots (1 ea. – LIS, LOS, RIS, ROS)1- Small Glue Bottle2- Screw Bosses w/Screws (4)20- #8 screws1- Header/Sill PlateASTBTHWBoot Hardware Bag for “Any Color” Astragal4- Boots (1 ea. – LIS, LOS, RIS, ROS)1- Small Glue BottleASTSTHWStiffener Hardware Bag for “Any Color” Astragal2- Stiffeners6- #8 screwsASTFSHWFiller Strip Hardware Bag for “ White” Astragals2- 20 3/8” Filler Strips1- 10 ½” Filler Strip1- 29” Filler Strip1- 3 ½” Filler Strip1- Header/Sill Plate20- #8 screwsASTBFSHWFiller Strip Hardware Bag for “ Bronze” Astragals2- 20 3/8” Filler Strips1- 10 ½” Filler Strip1- 29” Filler Strip1- 3 ½” Filler Strip1- Header/Sill Plate20- #8 screwsASTSBR1- Sill Bolt Receiver4Sill Bolt Receiver5615 E. Powhatan Ave Tampa, FL 33610(813) 971-4700 (800) 966-7753 Fax: (813) 977-563255615 E. Powhatan Ave Tampa, FL 33610(813) 971-4700 (800) 966-7753 Fax: (813) 977-5632

Outswing ThresholdsOutswing ThresholdsQOSH series1 ¼” high QLON Outswing threshold for use with 4 9/16” jambsAll Thresholds are Manufactured InhouseCustom sizes and Shapes Available upon RequestCypress Substrate Standard in ThresholdsOptions:Mill Finish, Bronze, or Bright Gold FinishJamb notchesScrew holesComposite substrateSill extender EXTQOSH1for 5 ¼” jambsSill extender EXTQOSH2for 6 9/16” jambsQOSH5QOSH series outswing threshold with the sill extender “EXTQOSH1” added for use with 5 ¼” jambsQOSH6QOSH series outswing threshold with the sill extender “EXTQOSH2” added for use with 6 9/16” jambs6All thresholds available in any custom lengthManufacturer of QualityDoor Components Since 19742125 S.W. 60th Hollywood,330235615WayE. PowhatanAve Tampa, FLFL33610(954)963-7373 1-800-243-7373 Fax(954)963-7377(813) 971-4700 (800) 966-7753 Fax: (813) 977-5632All thresholds available in any custom lengthManufacturer of QualityDoor Components Since 19742125 S.W. 60thWay Hollywood,330235615 E.PowhatanAve Tampa, FL FL33610(954)963-7373 (813)1-800-243-7373 Fax(954)963-7377971-4700 (800) 966-7753 Fax: (813) 977-56327

Outswing ThresholdsOutswing ThresholdsQOSR seriesQOSO series1 ¾” high Outswing threshold for use with 4 9/16” jambs** This threshold eliminates HVHZ water infiltration issues and works well with marble flooring1 3/8” high QLON Outswing Oak threshold for use with 4 9/16” jambs***This threshold features abeautiful natural red oak topOptions:Mill Finish, Bronze,or Bright Gold FinishJamb notchesScrew holesComposite substrateOptions:Mill Finish, Bronze,or Bright Gold FinishJamb notchesQOSO51 ¼” high QLON Outswing Oak threshold for use with 5 ¼” jambs***This threshold features a beautiful natural red oak topQOSR 61 ¾” high Outswing threshold for use with 6 9/16” jambs** This threshold eliminates HVHZ water infiltration issues and works well with marble flooringQOSO61 ¼” high QLON Outswing Oak threshold for use with 6 9/16” jambs***This threshold features a beautiful natural red oak top8All thresholds available in any custom length5615 E. Powhatan Ave Tampa, FL 33610(813) 971-4700 (800) 966-7753 Fax: (813) 977-5632All thresholds available in any custom length5615 E. Powhatan Ave Tampa, FL 33610(813) 971-4700 (800) 966-7753 Fax: (813) 977-56329

Outswing ThresholdsInswing ThresholdsQOS series1” high QLON Outswing threshold for use with 4 9/16” jambsOptions:Mill FinishJamb notchesScrew holesComposite substrateAll Thresholds are Manufactured InhouseCustom Sizes and Shapes Available upon RequestCypress Substrate Standard in ThresholdsLB series5/8” high “Low Bumper” Outswing bump thresholdOptions:Mill or Bronze FinishIndividually Packed in poly tubingHB series1” high “High Bumper” Outswing bump thresholdOptions:Mill Finish, Bronze, or Bright Gold FinishIndividually Packed in poly tubing10All thresholds available in any custom length5615 E. Powhatan Ave Tampa, FL 33610(813) 971-4700 (800) 966-7753 Fax: (813) 977-5632All thresholds available in any custom length5615 E. Powhatan Ave Tampa, FL 33610(813) 971-4700 (800) 966-7753 Fax: (813) 977-563211