WIXLIB

ARINC 801Termini and 38999 ConnectorsARINC 801 Fiber Optic ConnectorsThe high density fiber optic connection made by SOURIAU using 1.25mmferrules.A qualified technologyFlight proven qualified ARINC 801 standard.Wide range of materialFrom composite, aluminum, to stainless steelmaterial connectors in stock.Quality and service100% SOURIAU components: termini,patchcord and connectors.

ARINC 801 Termini and 38999 ConnectorsDescription Screw coupling Shell size from 11 to 25 Large number of layouts from 2 to 32 termini Composite, aluminum, stainless steel material Protected by cadmium, nickel, green zinc cobaltor black zinc nickel plating Accessories and tools available (protective caps,backshells, etc )Technical featuresOpticalEnvironmental Multimode insertion loss(IEC 61300-3-4 method B):Typical 0.3 dB Salt spray:. Aluminum shell:Olive Drab Cadmium (W): 500 HrsNickel (F): 48 HrsBlack Zinc Nickel (Z): 500 Hrs. Composite shell:Olive Drab Cadmium (J): 2000 HrsNickel (M): 2000 HrsWithout plating (X): 2000 Hrs. Stainless steel shell:Passivated (K): 500 HrsNickel (S): 500 HrsMechanical Endurance:Minimum 100 mating/unmating operations Shock:300 g, 3ms as per TIA/EIA 455-14 Vibration:23.1 Grms as per TIA/EIA 455-11 Contact retention:68N, as per SAE AS 13441 method 2009.1for 1.8mm cable Humidity:10 cycles/24h, -25 to 65 C, 90% RH as perTIA/EIA 455-5 Altitude immersionPressure equivalent to 50,000 ft (15,200 m) Temperature range:. Thermal cycling 50 cycles between -55 Cto 125 C as per TIA/EIA 455-3. Temperature life 1000 hours at 125 C asper TIA/EIA-455-4C2

ARINC 801 Termini and 38999 ConnectorsTerminiOrdering informationSOURIAU ARINC 801 TerminiARC1G18TAFiber type:G: Multimode fiber 50/125μm or 62.5/125μmE: Singlemode fiber 9/125μm - consult us for availabilityCable type and diameter:09T: Ø 900μm fiber cable - non waterproof18T: Ø 1.6mm to Ø 2.2mm fiber cable, tight structure18L: Ø 1.6mm to Ø 2.2mm fiber cable, loose structureContact version indexSpring8.13 Max.Ø2.75 Max.FerruleProtective capØ3.40 Max.Crimp sleeveØ2.25 Max.Termini dimensions12.3 Max. after crimping14.2 Min. forward positionNote: All dimensions are in millimeters (mm)3

ARINC 801 Termini and 38999 ConnectorsConnectorOrdering information8D Connector8D5U25F32BNShell type:0: Square flange receptacle (male insert only)5: Plug (female insert only)7: Jam nut receptacle (male insert only)U: ARINC 801 optical connectorShell size: 11, 13, 15, 17, 19, 21, 23, 25Material and plating:Aluminum:W: Olive green cadmiumF: NickelZ: Zinc NickelStainless steel:K: PassivatedS: NickelComposite:J: Olive green cadmiumM: NickelX: Without platingLayout: See belowInsert gender:A: MaleB: FemaleOrientation: N, A, B, C, D, ELayoutsSleeve holder front view1113*1517*1902040608122 opticalways4 opticalways6 opticalways8 opticalways12 opticalways21*23*25*16243216 opticalways24 opticalways32 opticalways* Please consult us for availability.4

ARINC 801 Termini and 38999 ConnectorsPatchcord - Your optical patchcord in 3 steps!Patchcord Cable/Terminus Combination Code212Select Termini End 1Select cableSelect Termini End 23Determine total lengthPatchcord LengthOrdering informationHA02Patchcord cable/terminus combination code:XXXX: See tables below and p.6Patchcord length:In meter when possible. Examples:- for a 3 meter assembly, use 003(M) and not 300(CM)- for a 3.5 meter assembly, use 350(CM)XXXXXXXMAStandard length tolerancesPatchcord from 30 cm to 1 m0 / 5 cmPatchcord from 1 m to 4 m0 / 10 cmPatchcord from 4 m to 15 m0 / 20 cmPatchcord 15 m0 / 30 cmLength unit:M: MeterCM: CentimeterPatchcord version index1Select Cable4.0/2.0-55 C to 125 C20OM24.0/2.01.8-55 C to 100 C300OM11.8-65 C to 135 C200OM2-55 C to 125 C62.5/1250.962.5/12550/125FOR 2.5/125Min. bendradius eraturerangeFibertypeApplicationTensilestrength (N)SOURIAU offers a wide range of cables, from cost efficient to high performance aeronautical cables.Select your optical fiber’s properties. Temperature range can be critical for your applications.If you need any help on a criteria selection, please contact ilooseARINC802FCABLE212.5/1.0204TightABS2293 LGFCABLE22* 1st value @850nm for multimode cable, 2nd value @1300nm for multimode (respectivly 1300nm and 1550nm for singlemode)Consult us for other harsh environment cables.5

ARINC 801 Termini and 38999 Connectors2Select Termini End 1 & 2 according to your selected cable,and get your final Patchcord Cable/Terminus Combination CodeMost common cables with most common contacts - For other combinations please consult us.All contacts are UPC polished otherwise specified.TerminiEnd 2Cable typesFCABLE11FCABLE21FCABLE22FCABLE41ARINC801 WGSA025407270602-LC 205760689FC-072105930644--0645ELIO09NGSAAll information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement. Any duplication is prohibited, unless approved in writing.TerminiEnd 1ARINC801 1.25mmTooling and accessoriesPlastic insertion and extraction toolPart Number: M81969/14-03Blue side: insertionWhite side: extractionDummy contactPart Number: ARC1-FILLfor male and female insertWDSARINC801WUSEN03 Copyright SOURIAU July 2020 - SOURIAU is a registered trademark.ARINC 801 adaptor for LC polishing and measuringPart Number: ALC1 (contact us for availability)LC Adaptor ARINC 801 termini LC compatible interfaceFor further information contact us at technical.emear@souriau.com (Europe - Asia - Africa)technical.americas@souriau.com (North America)or visit our web site www.souriau.com6

ARINC 801 Termini and 38999 Connectors Note: All dimensions are in millimeters (mm) Termini Termini dimensions 8.13 Max. 12.3 Max. after crimping 14.2 Min. forward position Protective cap Ferrule Ø2.25 Max. Ø3.40 Max. Ø2.75 Max. Spring Crimp sleeve Ordering information SOURIAU ARINC 801 Termini ARC1 G 18T A Fiber type: