Transcription
Power supply unit - QUINT-PS/1AC/12DC/15 - 2866718Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user'sdocumentation. Our General Terms of Use for Downloads are witched QUINT POWER power supply for DIN rail mounting with SFB (Selective Fuse Breaking)Technology, input: 1-phase, output: 12 V DC/15 AProduct DescriptionQUINT POWER power supplies with maximum functionalityQUINT POWER circuit breakers magnetically and therefore quickly trip at six times the nominal current, for selective and therefore cost-effectivesystem protection. The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports criticaloperating states before errors occur.Reliable starting of heavy loads takes place via the static power reserve POWER BOOST. Thanks to the adjustable voltage, all ranges between 5V DC . 56 V DC are covered.Why buy this productQuick tripping of standard circuit breakersReliable starting of difficult loadsPreventive function monitoringKey Commercial DataPacking unit1 STKGTINGTIN4046356307888Weight per Piece (excluding packing)1,100.000 gCustom tariff number85044030Country of originThailandTechnical dataDimensionsWidth60 mmHeight130 mmDepth125 mmWidth with alternative assembly122 mmHeight with alternative assembly130 mm01/19/2017 Page 1 / 8
Power supply unit - QUINT-PS/1AC/12DC/15 - 2866718Technical dataDimensionsDepth with alternative assembly63 mmAmbient conditionsDegree of protectionIP20Ambient temperature (operation)-25 C . 70 C ( 60 C Derating: 2,5 %/K)Ambient temperature (storage/transport)-40 C . 85 CMax. permissible relative humidity (operation) 95 % (at 25 C, non-condensing)Noise immunityEN 61000-6-2:2005Maximum altitude5000 mInput dataNominal input voltage range100 V AC . 240 V ACInput voltage range85 V AC . 264 V AC90 V DC . 350 V DC (UL 508: 250 V DC)Dielectric strength maximum300 V ACAC frequency range45 Hz . 65 HzFrequency range DC0 HzDischarge current to PE 3.5 mACurrent consumption1.9 A (120 V AC)0.9 A (230 V AC)1.9 A (110 V DC)0.9 A (220 V DC)Inrush surge current 15 A (typical)Power failure bypass 65 ms (120 V AC) 65 ms (230 V AC)Input fuse6.3 A (slow-blow, internal)Choice of suitable circuit breakers10 A . 16 A (AC: Characteristics B, C, D, K)Type of protectionTransient surge protectionProtective circuit/componentVaristorOutput dataNominal output voltage12 V DC 1 %Setting range of the output voltage (USet)5 V DC . 18 V DC ( 12 V DC, constant capacity restricted)Nominal output current (IN)15 A (-25 C . 60 C)POWER BOOST (IBoost)16 A (-25 C . 40 C permanent )Selective Fuse Breaking (ISFB)60 A (12 ms)Derating60 C . 70 C (2.5%/K)Connection in parallelYes, for redundancy and increased capacityConnection in seriesyesControl deviation 1 % (change in load, static 10 % . 90 %) 2 % (change in load, dynamic 10 % . 90 %) 0.1 % (change in input voltage 10 %)01/19/2017 Page 2 / 8
Power supply unit - QUINT-PS/1AC/12DC/15 - 2866718Technical dataOutput dataResidual ripple 10 mVPP (with nominal values)Output power180 WTypical response time 0.5 sMaximum power dissipation in no-load condition5WPower loss nominal load max.21 WGeneralNet weight1.1 kgEfficiency 89 % (for 230 V AC and nominal values)Insulation voltage input/output4 kV AC (type test)2 kV AC (routine test)Protection classIMTBF (IEC 61709, SN 29500) 1000000 h (25 C) 570000 h (40 C) 250000 h (60 C)Mounting positionhorizontal DIN rail NS 35, EN 60715Assembly instructionsAlignable: 5 mm horizontally, 15 mm next to active components, 50 mmverticallyConnection data, inputConnection methodPluggable screw connectionConductor cross section solid min.0.2 mm²Conductor cross section solid max.2.5 mm²Conductor cross section flexible min.0.2 mm²Conductor cross section flexible max.2.5 mm²Conductor cross section AWG min.16Conductor cross section AWG max.12Stripping length7 mmScrew threadM3Connection data, outputConnection methodPluggable screw connectionConductor cross section solid min.0.2 mm²Conductor cross section solid max.2.5 mm²Conductor cross section flexible min.0.2 mm²Conductor cross section flexible max.2.5 mm²Conductor cross section AWG min.16Conductor cross section AWG max.12Stripping length7 mmScrew threadM3Connection data for signalingConductor cross section solid min.0.2 mm²01/19/2017 Page 3 / 8
Power supply unit - QUINT-PS/1AC/12DC/15 - 2866718Technical dataConnection data for signalingConductor cross section solid max.2.5 mm²Conductor cross section flexible min.0.2 mm²Conductor cross section flexible max.2.5 mm²Conductor cross section AWG min.16Conductor cross section AWG max.12Screw threadM3Standards and RegulationsElectromagnetic compatibilityConformance with EMC Directive 2014/30/EUShock18 ms, 30g, in each space direction (according to IEC 60068-2-27)Noise emissionEN 55011 (EN 55022)Noise immunityEN 61000-6-2:2005Connection in acc. with standardCSAStandards/regulationsEN 61000-4-2EN 61000-4-3EN 61000-4-4EN 61000-4-5EN 61000-4-6Standard - Electrical safetyIEC 60950-1/VDE 0805 (SELV)Standard – Electronic equipment for use in electrical power installationsand their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)Standard – Safety extra-low voltageIEC 60950-1 (SELV) and EN 60204-1 (PELV)Standard - Safe isolationDIN VDE 0100-410Standard – Protection against shock currents, basic requirements forprotective separation in electrical equipmentEN 50178Standard – Limitation of mains harmonic currentsEN 61000-3-2Standard - Equipment safetyGS (tested safety)Standard - Approval for medical useIEC 60601-1, 2 x MOOPUL approvalsUL Listed UL 508UL/C-UL Recognized UL 60950-1UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D(Hazardous Location)Vibration (operation) 15 Hz, amplitude 2.5 mm (according to IEC 60068-2-6)15 Hz . 150 Hz, 2.3g, 90 min.Low Voltage DirectiveConformance with LV directive 2006/95/ECInformation technology equipment - safety (CB scheme)CB SchemeRail applicationsEN 50121-4Overvoltage category (EN 62477-1)IIIDrawings01/19/2017 Page 4 / 8
Power supply unit - QUINT-PS/1AC/12DC/15 - 2866718Block diagramL ( )activeN (-)PFCDC OKI IN1314ClassificationseCl@sseCl@ss 4.027040702eCl@ss 4.127040702eCl@ss 5.027049002eCl@ss 5.127049002eCl@ss 6.027049002eCl@ss 7.027049002eCl@ss 8.027049002eCl@ss 9.027040701ETIMETIM 2.0EC001039ETIM 3.0EC001039ETIM 4.0EC000599ETIM 5.0EC002540ETIM 6.0EC002540UNSPSCUNSPSC 6.0130211502UNSPSC 7.090139121004UNSPSC 1139121004UNSPSC 12.0139121004UNSPSC 13.239121004ApprovalsApprovalsApprovalsCSA / UL Recognized / UL Listed / cUL Recognized / IECEE CB Scheme / SEMI F47 / EAC / EAC / cUL Listed / cULus RecognizedEx ApprovalsUL Listed / cUL Listed / cULus Listed01/19/2017 Page 5 / 8
Power supply unit - QUINT-PS/1AC/12DC/15 - 2866718ApprovalsApproval details ication/certified-product-listing/2162673UL Recognized /1FRAME/index.htmFILE E 211944UL Listed /1FRAME/index.htmFILE E 123528cUL Recognized /1FRAME/index.htmFILE E 211944IECEE CB Scheme http://www.iecee.org/SI-2093 A1SEMI F47 SEMI F47EAC EAC-ZulassungEAC RU CDE.A*30.B.01082cUL Listed /1FRAME/index.htmcULus Recognized /1FRAME/index.htmCSAFILE E 12352801/19/2017 Page 6 / 8
Power supply unit - QUINT-PS/1AC/12DC/15 - 2866718AccessoriesAccessoriesAssembly adapterAssembly adapters - UWA 182/52 - 2938235Universal wall adapter for securely mounting the power supply in the event of strong vibrations. The power supply isscrewed directly onto the mounting surface. The universal wall adapter is attached at the top/bottom.Assembly adapters - QUINT-PS-ADAPTERS7/2 - 2938206Assembly adapter for QUINT POWER 10A on S7-300 railMounting rail adapterElectronic housing - UTA 107 - 2853983Universal DIN rail adapterRedundancy moduleDiode - QUINT-DIODE/12-24DC/2X20/1X40 - 2320157DIN rail diode module 12-24 V DC/2x20 A or 1x40 A. Uniform redundancy up to the consumer.Redundancy module - TRIO-DIODE/12-24DC/2X10/1X20 - 2866514Redundancy module with function monitoring, 12-24 V DC, 2x 10 A, 1x 20 A01/19/2017 Page 7 / 8
Power supply unit - QUINT-PS/1AC/12DC/15 - 2866718AccessoriesThermomagnetic device circuit breakersThermomagnetic device circuit breaker - CB TM1 1A SFB P - 2800836Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.Thermomagnetic device circuit breaker - CB TM1 2A SFB P - 2800837Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.Thermomagnetic device circuit breaker - CB TM1 3A SFB P - 2800838Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.Thermomagnetic device circuit breaker - CB TM1 4A SFB P - 2800839Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.Thermomagnetic device circuit breaker - CB TM1 5A SFB P - 2800840Thermomagnetic device circuit breaker, 1-pos., tripping characteristic SFB, 1 PDT contact, plug for base element.Phoenix Contact 2017 - all rights reservedhttp://www.phoenixcontact.com01/19/2017 Page 8 / 8
Technology, input: 1-phase, output: 12 V DC/15 A . QUINT POWER circuit breakers magnetically and therefore quickly trip at six times the nominal current, for selective and therefore cost-effective system protection. The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports critical .
