WIXLIB

SULLAIR air tools

The Right Toolfor Your Tough JobApplicationsTool Horizontal and overhead applicationsChipping Hammer Industrial applications2Sullair ModelClassWeightcfmMCH-2/3/4MCH-3S/4S15#16-19 lbs26-33 Cutting and driving large rivets Heavy duty demolition workRivet BusterMRB-8/1130#30-33 lbs44-50 Breaking light concrete and other light jobsLight Pavement BreakerMPB-30A30#35.5 lbs37 Concrete bridge decks andgeneral demo workLight Pavement BreakerMPB-35A40#39 lbs49 Concrete road breaking andother general demo workMedium Pavement BreakerMPB-60A60#69.5 lbs48 Heavy demo work breaking tough,reinforced concreteHeavy Pavement BreakerMPB-90A90#92 lbs62 Compacting backfill in ditches, trenches,foundations and around polesBackfill TamperMBT-635#40.5 lbs32

Pavement Breakers Designedto Work Better and Last LongerSullair Pavement Breakers are Designed for Work Efficiency and a Long, Trouble-Free LifeHigh-Wear Parts ReducedSullair breakers have eliminated most high-wear parts. Fewer partsmean less wear, less maintenance, and less downtime.No Multi-Part Tappet SystemUnlike conventional breakers, Sullair breakers have no multi-parttappet system. With no tappet system, which requires threeindependent impacts, noise is reduced.One-Piece, Non-Protrusive HousingA leak-proof air cushion forms at the end of the piston stroke andstops the piston from direct impact when the tool is not breaking.The elimination of side rods, nuts and springs makes Sullair breakerssleeker and more comfortable to operate.Minimal Lubrication RequiredWith only two parts moving during operation, normal oil carryoverfrom the compressor, combined with moisture in the air, will usuallyprovide sufficient lubrication under normal operating conditions.Manual lubrication before storage is sufficient.Interchangeable PartsStandardization of design permits a high degree of interchangeabilityof parts between Sullair models.QuieterThe piston, impacting directly on the steel shank rather than a tappet,reduces noise level of the breaker.Super-Silenced, Anti-Freeze ModelsA unique silencer reduces noise levels by 6 dBA, while preventingthe tool from freezing, even in the coldest climates.Smoother OperationReduced kickback is less fatiguing to the operator.Simple Latch DesignDurable double roll pin permits easy steel changing.Less Air ConsumptionThe direct impact piston design, non-corrosive distribution valveand one-piece housing dramatically reduce air consumption.You can operate more tools from a single compressor.Limited Parts WarrantySullair provides a two-year limited warranty on all breaker parts to cover: Manufacturing defects Normal operation wear Hassle Free Warranty: Sullair will ship a new replacement tool for a defective tool duringthe first six months of warrantyVariable speed throttleDistribution valveSwivel air inletExhaust deflectorStandard hose couplingLeakproof air cushionPlated finishDirect impact pistonOne-piece housingReplaceable chuck bushingLatch retainerDouble roll pin3

Pavement BreakersSullair MPB-90A Compared to a Conventional Thor Type Breaker30% less parts than conventional breakers Fewer parts to maintain Less parts to failDirect impact piston No multi-part tappet systemlike conventional breakersOne-piece housing Elimination of side rods,nuts and spring valvesMPB-60AMPB-35C4MPB-30AMPB-90A

Technical SpecificationsStandard T-handle Pavement CHUCK SIZE(in)BORE & STROKE(in)BLOWSPER MINUTEAIR CONSUMPTION(cfm)AIR INLET(NPT)WEIGHT(lbs)LENGTH(in)6825307011 8 x 6 2 7 16 x 5 9 32 1380623/4 92271/2 6825307111/4 x 6 2 7 16 x 5 9 32 1380623/4 92271/2 6825307211 8 x 6 2 5 32 x 5 5 32 1360483/4 69261/2 6825307311/4 x 6 2 5 32 x 5 5 32 1360483/4 69261/2 682530921 Hex x 41/4 13/4 x 5 5 16 12004938 39251/2 6825307478 Hex x 31/4 1 25 32 x 3 25 32 18503738 35.523 682530751 Hex x 41/4 1 25 32 x 3 25 32 18503738 35.523 Breaker AccessoriesPART NUMBERDESCRIPTIONWHIP HOSE ASSEMBLY, 8 X 1/2 ID. 300 PSI RATED HOSE02250152-5853802250152-58478 MNPT air inlet swivel -24 male thread inlet swivel x 2-lug universal quick connectWHIP HOSE ASSEMBLY, 6 X 1/2 ID. 300 PSI RATED HOSE (STEEL HYD. SWIVEL)02250176-106 MNPT steel hydraulic swivel w/ 7 8 bushing x 2-lug universal quick connect38WHIP HOSE ASSEMBLY WITH 1 6 PT OILER, 8 X 1/2 ID. 300 PSI RATED HOSE02250174-4103802250174-4111/2 MNPT air inlet swivel x 2-lug universal, w/ oiler (251309) MNPT air inlet swivel x 2-lug universal, w/ oiler (251309)5

Chipping HammersBuilt to LastThe Sullair Chipping Hammer is Designed for Rugged DependabilityFour Bolt BackheadThis unique design reduces handle breakage. The common problemof a threaded handle-to-barrel connection coming loose and damagingthe handle and internal parts has been eliminated.D-handleThe strong “D” configuration is large enough to allow a comfortable,sure grip, even for a gloved hand.Minimal Lubrication RequiredBecause of the Sullair chipping hammer’s unique design and materials,normal oil carryover from the compressor, combined with moisture in the air,will usually provide sufficient lubrication under normal operating conditions.Rotatable Exhaust DeflectorA durable molded exhaust deflector directs exhaust air away fromthe operator.Standard Oval Return RetainersContractors’ choice spring retainer. Round collar retainer styleavailable as an accessory.User-Friendly, Screw-On Ball Retainer OptionOffering a quick and easy way to change steel, simply by pulling theretainer back, inserting your steel and releasing to lock the steel in place.Choice of Stroke Length and BushingsThe Sullair chipping hammer is available in 2 , 3 and 4 strokeswith either .680 round or .580 hex bushings.Air Inlet OptionTwo air inlet bushings are furnished: 3 8 NPT and 7 8 -24, internal thread.The bushings provide for versatile hose connections while protecting thehandle inlet threads.Limited Parts WarrantySullair provides a limited parts warranty to cover: Two years on the handle and cylinder One year on all other parts* Hassle Free Warranty: Sullair will ship a new replacement tool for a defective tool duringthe first six months of warrantyTwo air inlets furnishedLarge D-handleMCH-44-bolt handle connectionMCH-3MCH-2Exhaust deflectorPlated finish on barrelChoice of strokesChoice of bushingsMCH-3S and MCH-4SScrew-on rtetainer (no springs)6* Excludes retainer and retainer springs

Technical SpecificationsChipping Hammer — Standard Oval Return Lock Spring RetainerMODELMCH-2MCH-3MCH-4PARTNUMBERCHUCK SIZE(in)BORE & STROKE(in)BLOWSPER MINUTEAIR CONSUMPTION(cfm)AIR INLET(NPT)WEIGHT(lbs)LENGTH(in)68252240-001.680 round11 8 x 5 36003438 NPT or 7 8 -241614 68252243-001.580 hex11 8 x 5 36003438 NPT or 7 8 -241614 68252241-001.680 round11 8 x 5 3/4 22803338 NPT or 7 8 -2418151/4 68252244-001.580 hex11 8 x 5 3/4 22803338 NPT or 7 8 -2418151/4 68252242-001.680 round11 8 x 41/4 18003038 NPT or 7 8 -2418161/2 68252245-001.580 hex11 8 x 41/4 18003038 NPT or 7 8 -2418161/2 AIR INLET(NPT)WEIGHT(lbs)LENGTH(in) NPT or 7 8 -2418151/4 NPT or 7 8 -2418151/4 NPT or 7 8 -2418161/2 NPT or 7 8 -2418161/2 Chipping Hammer — Screw-0n Ball Retainer (No Springs Required)MODELMCH-3SMCH-4SPARTNUMBERCHUCK SIZE(in)BORE & STROKE(in)BLOWSPER MINUTEAIR CONSUMPTION(cfm)68252247-004.680 round11 8 x 33/4 2280333868252250-004.580 hex11 8 x 33/4 2280333868252248-004.680 round11 8 x 41/4 1800303868252251-004.580 hex11 8 x 41/4 18003038Chipping Hammer — Retainers and AccessoriesPART NUMBERDESCRIPTIONREPLACEMENT RETAINERS AND LOCK SPRINGS68722235Retainer, for oval collar steel–chrome finish–standard250012-526Retainer, for round collar steel w/bumper250018-894Rubber bumper replacement for round collar retainer250021-222Retainer, universal ball type (spring)250012-530Lock Spring, heavy duty250013-916Lock Spring, plastic68780341Retainer, for oval collar steel–chrome finish–standard68722755Retainer MLC, oval collar round shank steel68722756Retainer MLC, oval collar hex shank steelWHIP HOSE ASSEMBLIES, 8 X 1/2 ID. 300 PSI RATED HOSE02250152-5853802250152-58478 MNPT air inlet swivel -24 male thread inlet swivel x 2-lug universal quick connectWHIP HOSE WITH SWING COUPLING, 8 X 1/2 ID HOSE W 1 WHIP02250139-7117802250139-71238 -24 male thread air inlet with swing coupling x 2-lug universal quick connect MNPT air inlet with swing coupling x 2-lug universal quick connect7

Rivet BusterThe Power for Cutting Off Large Rivet Heads, Heavy Duty Chipping and Concrete BreakingApplications Include: Bridge jobs Steel structure maintenance Railroad car repair Shipyards Petrochemical plants Demolition workSimplified Control ValveAllows for smoother operation in dirty conditions through preciselyengineered tolerances.LubricationRivet Busters require inline lubrication.Limited Parts WarrantySullair provides a 90-day limited parts warranty for all tool parts to cover: Manufacturing defectsD-handle with Inside TriggerHandle design provides comfort and control to the operatorin demolition applications.Variable Throttle ControlAllows variable speed control for maximum production.Muffler and Screened Inlet Bushing StandardProvides quieter operation and filters the inlet fromcontaminating particles.Interchangeable Parts Provide FlexibilityInterchangeable parts* reduce inventoryand increase parts versatility.MRB-8MRB-11Technical SpecificationsRivet BustersPARTNUMBERCHUCK SIZE(in)BORE & STROKE(in)BLOWSPER MINUTEAIR CONSUMPTION(cfm)MRB-802250094-89411 x Jumbo13 16 Round x 8 11404412MRB-1102250094-89511 x Jumbo13 16 Round x 8 8505012MODELRivet Busters – Retainers and AccessoriesPART NUMBERDESCRIPTION02250166-693Rivet Buster Lower End Kit250035-776Retainer250029-072Upper Sleeve 11X250013-625Lower Sleeve 11X250013-626Bumper250013-594Retainer springWHIP HOSE ASSEMBLY WITH 1 6 PT OILER, 8 X 1/2 ID. 300 PSI RATED HOSE02250174-4118* Excludes cylinder MNPT air inlet swivel x 2-lug universal, w/ oiler (251309)12AIR INLET(NPT)WEIGHT(lbs)LENGTH(in) NPT3022 1 2 NPT3325 1 2

BackfillTamperThe Sullair MBT-6 Backfill Tamper Gives You All the Power forCompacting at a Speed Which Allows Comfortable ControlApplicationsThe Sullair MBT-6 backfill tamper is the ideal tool for compacting backfillaround utility poles, foundations and other structures. It quickly andefficiently compacts backfill soil excavated to perform service line repairbefore patching the pavement.Rotatable Exhaust DeflectorA durable molded exhaust deflector aims the exhaust away from the operator.Standard Steel 6 ButtA 6 diameter solid steel butt is standard. Optional butts for specialapplications are available. The butt is held onto the piston rod with a hexhead clamp screw for ease of assembly and removal.MBT-6Smooth FinishPlated barrel promotes easy clean-off of backfill materials.Minimal Lubrication RequiredWith the design features and premium materials of the MBT-6, normal oilcarryover from the compressor, combined with the moisture in the air, willsupply sufficient lubrication under normal operating conditions.No Packing AdjustmentThere is no packing adjustment necessary for the Sullair MBT-6. Thedouble seals retain their effectiveness for the life of the packing.Limited WarrantySullair provides a one-year limited warranty. Hassle Free Warranty: Sullair will ship a new replacement tool for a defective tool duringthe first six months of warranty9