WIXLIB

Distributed By:www.onesourcerental.comSullair Air ToolsWe have the right tool for your job.Applications Light chipping Overhead fine detail and restorationwork Horizontal and overhead applications Industrial applications Cutting and driving large rivets Heavy duty demolition work Breaking light concrete and otherlight jobs Setting anchors Light horizontal demolition work Concrete bridge decks andgeneral demo work Concrete road breaking andother general demo work Heavy demo work breaking tough,reinforced concrete Excavation of clay and hardpan Light horizontal demolition work Medium demolition work Drilling holes in concrete and bricks Compacting backfill in ditches,trenches, foundations and aroundpoles Drill for depths up to 6 feet and1–1/2" diameter Drill for depths up to 10 feet and1–3/4" diameter Drill for depths up to 20 feet and2" diameter Drill for depths up to 25 feet and3" diameter

We Have the Right Sullair Tool forYour Tough JobApplicationsToolSullair ModelClassWeightcfmLight Chipping HammerMLC-1010#12 lbs18Chipping HammerMCH-2/3/415#16-19 lbs26-33Rivet BusterMRB-8/1130#30-33 lbs44-50 Breaking light concrete and other light jobsLight Paving BreakerMPB-30A30#35.5 lbs37 Concrete bridge decks andgeneral demo workLight Paving BreakerMPB-35A40#39 lbs49 Concrete road breaking andother general demo workMedium Paving BreakerMPB-60A60#69.5 lbs48Heavy Paving BreakerMPB-90A90#92 lbs62Light Demolition ToolMDT-2220#24.7 lbs33.4Medium Demolition ToolMDT-3030#33 lbs37 Excavation of clay and hardpan Light horizontal demolition workMedium DiggerMCD-3030#33.8 lbs37 Compacting backfill in ditches, trenches,foundations and around polesBackfill TamperMBT-635#40.5 lbs32 Setting anchors Drilling holes in concrete and bricksHammer DrillMRD-99#9 lbs21 Setting anchors Drilling holes in concrete and bricksLight Rock DrillMRD-3030#34 lbs53 Drill for depths up to 6 feet and1–1/2" diameterLight Rock DrillMRD-4040#45.5 lbs80 Drill for depths up to 10 feet and1–3/4" diameterMedium Rock DrillMRD-5050#48.5 lbs123 Drill for depths up to 20 feet and2" diameterHeavy Rock DrillMRD-5555#56 lbs95 Drill for depths up to 25 feet and3" diameterHeavy Rock DrillMRD-6060#59 lbs98 Light chipping Overhead fine detail and restoration work Horizontal and overhead applications Industrial applications Cutting and driving large rivets Heavy duty demolition work Heavy demo work breaking tough,reinforced concrete Excavation of clay and hardpan Light horizontal demolition work Medium demolition workDistributed By:www.onesourcerental.com2

Sullair’s Paving Breakers are Designed to Work Betterand Last LongerThe Sullair Paving Breakers are Designed for WorkEfficiency and a Long and Trouble-Free LifeHigh-Wear Parts ReducedThe Sullair breakers have eliminated most high-wear parts.Fewer parts mean less wear, less maintenance, and lessdowntime.No Tappet SystemUnlike conventional breakers, Sullair breakers have nomulti-part tappet system. With no tappet system, whichrequires three independent impacts, noise is also reduced.One-Piece, Non-Protrusive HousingA leak-proof air cushion forms at the end of the piston strokeand stops the piston from direct impact when the tool is notbreaking. The elimination of side rods, nuts and springsmakes Sullair breakers sleeker and more comfortableto operate.Minimal Lubrication RequiredWith only two parts moving during operation, normal oilcarryover from the compressor, combined with moisture in theair, will usually provide sufficient lubrication under normaloperating conditions. Manual lubrication before storage issufficient.Parts InterchangeabilityStandardization of design permits a high degree of interchangeability of parts between Sullair models.QuieterThe piston, impacting directly on the steel shank rather than atappet, reduces noise level of the breaker.Super-Silenced, Anti-Freeze ModelsA unique silencer reduces noise levels by 6 dBA, whilepreventing the tool from freezing, even in the coldest climates.Anti-Vibration ModelsThe flex handle option reduces up to 60% of the vibration tothe operator without a loss of power.Smoother OperationReduced kickback is less fatiguing to the operator.Simple Latch DesignDurable double roll pin permits easy steel changing.Less Air ConsumptionThe direct impact piston design, non-corrosive distributionvalve and one-piece housing dramatically reduce airconsumption. You can operate more tools from a singlecompressor. For example, a 125 cfm compressor will operatetwo MPB-90 breakers.Variable speed throttleDistribution valveSwivel air inletExhaust deflectorStandard hose couplingLeakproof air cushionTwo-Year Limited WarrantyAll Sullair breaker parts are warranted for two-years againstmanufacturing defects. Additionally, should a part wear outduring normal operation, it is covered by Sullair’s exclusivetwo-year warranty.Distributed By:Plated finishDirect impact pistonOne-piece housingwww.onesourcerental.comReplaceable chuck bushingLatch retainerDouble roll pin3

Sullair’s Anti-Vibration Paving BreakerSullair’s ergonomically designed paving breaker features ahinged anti-vibration handle that reduces up to 60% ofvibrations to the operator without loss of power. By absorbingthe shock, the anti-vibration handle reduces operator fatigue,lessens stress to the upper back and shoulders, andultimately promotes productivity.Researching Breaker VibrationThis handle design is based on research conducted byevaluating the stresses of paving breakers then in existence,Sullair found that the vibrations (often identified as kickback)came from pressure forces which act on both the body andthe hitting piston of the machine. Research showed thatbreaker vibrations–at a rate of 1000 to 1500 per minute–arerelayed through muscular contraction of the hands and armsto the rest of the body.Finding the Ideal SolutionOver a period of years, Sullair investigated variousapproaches to reducing the effects of breaker vibration.Several prototypes were built and tested as the effortfocused on developing a sturdier handle while providingsimple and progressive start-up. The research culminatedin the design of the Anti-Vibration Paving Breaker.A Hinged Handle and IsolatorsIn this tool, vibrations are reduced by crossed handles thatswivel on two pins on either side of the breaker head. Thedesign provides sufficient clearance while keeping thehandles compact. Two helical springs prevent direct contactbetween the handles and the body of the breaker. Thetension of the springs not only provides sufficient thrust whenthe breaker is operating; it also allows the springs to act asefficient isolators.Power Through SimplicityThe handle suspension system is independent and has noeffect on the breaker’s striking power. Based on a “powerthrough simplicity” concept, the striking system uses a singlepiston that is guided through the entire length of the stroke.No Tappet SystemUnlike conventional breakers, Sullair breakers have nomulti-part tappet system. With fewer parts, wear is reducedand risk of air leaks is minimized. With no tappet system,which requires three independent impacts, noise is alsoreduced.High Impact EnergyTests prove that these single piston breakers deliver moreimpact energy, pound for pound, than conventional breakers.The heavier long stroke also reduces piston speed, thusextending the life of the tool.Less Air NeededThe breaker’s direct impact piston design, non-corrosivedistribution valve and one-piece housing dramatically reduceair consumption. As a result, more anti-vibration pavingbreakers can be operated from a single compressor.Distributed By:www.onesourcerental.comAnti-Vibration Handles4

Distributed By:www.onesourcerental.comPaving Breaker Design SpecificationsModelMPB-90AWeightlbs92Lengthin271 2"Bore & Strokein72 16" x 59 32"Blowsper Minute1380Air Consumptioncfm62MPB-60A691 2261 2"25 32" x 55 32"1360483 4"74MPB-35CMPB-30A39351 2251 2"23"13 4" x 55 16"125 32" x 325 32"1200185049373 8"3 8"4341MPB-90AF1991 2287 8"27 16" x 59 32"1380623 4"105MPB-60AF177281 8"25 32" x 55 32"1360483 4"82MPB-90AS294271 8"27 16" x 59 32"1380623 4"101MPB-60AS2711 2263 4"25 32" x 53 32"1360483 4"79MPB-90AFS3 101287 8"27 16" x 59 32"1380623 4"108MPB-60AFS3 781 2281 4"25 32" x 55 32"1360483 4"8624"125 32" x 325 32"1850373 8"39MCD-30333 4Air Inlet Shipping WeightNPTlbs3 4"97ChuckSize11 8" HX x 6"11 4" HX x 6"11 8" HX x 6"11 4" HX x 6"1" HX x 41 4"7 8" HX x 31 4"1" HX x 41 4"11 8" HX x 6"11 4" HX x 6"11 8" HX x 6"11 4" HX x 6"11 8" HX x 6"11 4" HX x 6"11 8" HX x 6"11 4" HX x 6"11 8" HX x 6"11 4" HX x 6"11 8" HX x 6"11 4" HX x 6"7 8" HX x 31 4"1" HX x 41 4"1 – Flex handle anti-vibration2 – Super silent3 – Flex handle anti-vibration and super 0AMCD-30AMPB-35C5

Sullair Chipping Hammers are Built to LastFour Bolt BackheadThis unique design reduces handle breakage. The commonproblem of a threaded handle-to-barrel connection comingloose and damaging the handle and internal parts has beeneliminated.Choice of RetainersOval collar retainers are included as standard. Universal balltype and round collar are also offered. Ball type retainersoffer a quick and easy way to change steel. Simply pull theretainer back, insert the steel, and release the retainer to lockthe steel in place. Round collars offer more contact area forretention and are stronger at the collar due to a full radiusaround the collar area.D-HandleThe strong “D” configuration is large enough to allow acomfortable, sure grip, even for a gloved hand.Rotatable Exhaust DeflectorA durable molded exhaust deflector directs exhaust air awayfrom the operator.Minimal Lubrication RequiredBecause of the Sullair chipping hammer’s unique design andmaterials, normal oil carryover from the compressor,combined with moisture in the air, will usually providesufficient lubrication under normal operating conditions.Air Inlet OptionTwo air inlet bushings are furnished: 3 8" NPT and 7 8-24,internal thread. The bushings provide for versatile hoseconnections while protecting the handle inlet threads. Eightfoot whip hoses with fittings optional.Smoother OperationThe Sullair chipping hammer’s unique backhead designresults in greater operator comfort.Limited Parts WarrantySullair provides a limited parts warranty of two-years on thehandle and cylinder, one-year on all other parts except theretainer and retainer springs.The Sullair Chipping Hammer is Designedfor Rugged DependabilityChoice of Stroke Length and BushingsThe Sullair chipping hammer is available in 2", 3" and 4"strokes with either .680 round or .580 hex bushings.Two air inlets furnishedDistributed By:www.onesourcerental.comLarge D-handle4-bolt handle connectionExhaust deflectorPlated finish on barrelChoice of strokesChoice of bushings6

Distributed By:www.onesourcerental.comChipping Hammer Design SpecificationsModelWeightLengthin14"Bore &Strokein11 8" x 3"ImpactRateBlows per Minute3600AirConsumptioncfm34MCH-2lbs165 8MCH-3Air InletDiameterin3 8" NPT or 7 8-24ShippingWeightlbs18173 4151 4"11 8" x 33 4"2280333 8"NPT or 7 8-2419MCH-3S193 417"11 8" x 33 4"2280333 8"NPT or 7 8-24207 8MCH-4185 8161 2"11 8" x 41 4"1800303 8"NPT or 7 8-2420MCH-4S203 418"11 8" x 41 4"1800303 8"NPT or 7 8-24221 8MLC-1012141 2"17 64" x 113 16"2940173 8"NPT or 7 8-2414Chuck Size.680 round.580 hex.680 round.580 hex.680 round.580 hex.680 round.580 hex.680 round.580 hex.680 round.580 hexMCH-4MCH-3MCH-2MLC-10MCH-3S and MCH-4SScrew-on RetainerNo Springs7