WIXLIB

SULLAIR air tools

The Right Toolfor Your Tough JobApplicationsTool Horizontal and overhead applicationsChipping Hammer Industrial applications2Sullair ModelClassWeightcfmMCH-2/3/4MCH-3S/4S15#16-19 lbs26-33 Cutting and driving large rivets Heavy duty demolition workRivet BusterMRB-8/1130#30-33 lbs44-50 Breaking light concrete and other light jobsLight Pavement BreakerMPB-30A30#35.5 lbs37 Concrete bridge decks andgeneral demo workLight Pavement BreakerMPB-35A40#39 lbs49 Concrete road breaking andother general demo workMedium Pavement BreakerMPB-60A60#69.5 lbs48 Heavy demo work breaking tough,reinforced concreteHeavy Pavement BreakerMPB-90A90#92 lbs62 Excavation of clay and hardpan Light horizontal demolition workLight Demolition ToolMDT-2220#24.7 lbs33.4 Medium demolition workMedium Demolition ToolMDT-3030#33 lbs37 Compacting backfill in ditches, trenches,foundations and around polesBackfill TamperMBT-635#40.5 lbs32 Setting anchors Drilling holes in concrete and bricksHammer DrillMRD-99#9 lbs21 Setting anchors Drilling holes in concrete and bricksLight Rock DrillMRD-3030#34 lbs53 Drill for depths up to 6 feet and11/2 diameterLight Rock DrillMRD-4040#45.5 lbs80 Drill for depths up to 10 feet and13/4 diameterMedium Rock DrillMRD-5050#48.5 lbs123

Pavement Breakers Designedto Work Better and Last LongerSullair Pavement Breakers are Designed for Work Efficiency and a Long, Trouble-Free LifeHigh-Wear Parts ReducedSullair breakers have eliminated most high-wear parts. Fewer partsmean less wear, less maintenance, and less downtime.No Multi-Part Tappet SystemUnlike conventional breakers, Sullair breakers have no multi-parttappet system. With no tappet system, which requires threeindependent impacts, noise is reduced.One-Piece, Non-Protrusive HousingA leak-proof air cushion forms at the end of the piston stroke andstops the piston from direct impact when the tool is not breaking.The elimination of side rods, nuts and springs makes Sullair breakerssleeker and more comfortable to operate.Minimal Lubrication RequiredWith only two parts moving during operation, normal oil carryoverfrom the compressor, combined with moisture in the air, will usuallyprovide sufficient lubrication under normal operating conditions.Manual lubrication before storage is sufficient.Interchangeable PartsStandardization of design permits a high degree of interchangeabilityof parts between Sullair models.Smoother OperationReduced kickback is less fatiguing to the operator.Simple Latch DesignDurable double roll pin permits easy steel changing.Less Air ConsumptionThe direct impact piston design, non-corrosive distribution valveand one-piece housing dramatically reduce air consumption.You can operate more tools from a single compressor.Limited Parts WarrantySullair provides a two-year limited warranty on all breaker parts to cover: Manufacturing defects Normal operation wearVariable speed throttleDistribution valveSwivel air inletExhaust deflectorStandard hose couplingLeakproof air cushionQuieterThe piston, impacting directly on the steel shank rather than a tappet,reduces noise level of the breaker.Super-Silenced, Anti-Freeze ModelsA unique silencer reduces noise levels by 6 dBA, while preventingthe tool from freezing, even in the coldest climates.Plated finishDirect impact pistonOne-piece housingReplaceable chuck bushingLatch retainerDouble roll pin3

Pavement BreakersSullair MPB-90A Compared to a Conventional Thor Type Breaker30% less parts than conventional breakers Fewer parts to maintain Less parts to failDirect impact piston No multi-part tappet systemlike conventional breakersOne-piece housing Elimination of side rods,nuts and spring valvesMPB-60AMPB-35C4MPB-30AMPB-90A

Technical SpecificationsStandard T-handle Pavement CHUCK SIZE(in)BORE & STROKE(in)BLOWSPER MINUTEAIR CONSUMPTION(cfm)AIR INLET(NPT)WEIGHT(lbs)LENGTH(in)6825307011 8 x 6 2 7 16 x 5 9 32 1380623/4 92271/2 6825307111/4 x 6 2 7 16 x 5 9 32 1380623/4 92271/2 6825307211 8 x 6 2 5 32 x 5 5 32 1360483/4 69261/2 6825307311/4 x 6 2 5 32 x 5 5 32 1360483/4 69261/2 682530921 Hex x 41/4 13/4 x 5 5 16 12004938 39251/2 6825307478 Hex x 31/4 1 25 32 x 3 25 32 18503738 35.523 682530751 Hex x 41/4 1 25 32 x 3 25 32 18503738 35.523 Breaker AccessoriesPART NUMBERDESCRIPTIONWHIP HOSE ASSEMBLY, 8 X 1/2 ID. 300 PSI RATED HOSE02250152-5853802250152-58478 MNPT air inlet swivel -24 male thread inlet swivel x 2-lug universal quick connectWHIP HOSE ASSEMBLY, 6 X 1/2 ID. 300 PSI RATED HOSE (STEEL HYD. SWIVEL)02250176-106 MNPT steel hydraulic swivel w/ 7 8 bushing x 2-lug universal quick connect38WHIP HOSE ASSEMBLY WITH 1 6 PT OILER, 8 X 1/2 ID. 300 PSI RATED HOSE02250174-4103802250174-4111/2 MNPT air inlet swivel x 2-lug universal, w/ oiler (251309) MNPT air inlet swivel x 2-lug universal, w/ oiler (251309)5

Chipping HammersBuilt to LastThe Sullair Chipping Hammer is Designed for Rugged DependabilityFour Bolt BackheadThis unique design reduces handle breakage. The common problemof a threaded handle-to-barrel connection coming loose and damagingthe handle and internal parts has been eliminated.D-handleThe strong “D” configuration is large enough to allow a comfortable,sure grip, even for a gloved hand.Minimal Lubrication RequiredBecause of the Sullair chipping hammer’s unique design and materials,normal oil carryover from the compressor, combined with moisture in the air,will usually provide sufficient lubrication under normal operating conditions.Rotatable Exhaust DeflectorA durable molded exhaust deflector directs exhaust air away fromthe operator.User-Friendly, Screw-On Ball Retainer OptionOffering a quick and easy way to change steel, simply by pulling theretainer back, inserting your steel and releasing to lock the steel in place.Choice of Stroke Length and BushingsThe Sullair chipping hammer is available in 2 , 3 and 4 strokeswith either .680 round or .580 hex bushings.Air Inlet OptionTwo air inlet bushings are furnished: 3 8 NPT and 7 8 -24, internal thread.The bushings provide for versatile hose connections while protecting thehandle inlet threads.Limited Parts WarrantySullair provides a limited parts warranty to cover: Two years on the handle and cylinder One year on all other parts*Standard Oval Return RetainersContractors’ choice spring retainer. Round collar retainer styleavailable as an accessory.Two air inlets furnishedLarge D-handleMCH-44-bolt handle connectionMCH-3MCH-2Exhaust deflectorPlated finish on barrelChoice of strokesChoice of bushingsMCH-3S and MCH-4SScrew-on rtetainer (no springs)6* Excludes retainer and retainer springs

Technical SpecificationsChipping Hammer — Standard Oval Return Lock Spring RetainerMODELMCH-2MCH-3MCH-4PARTNUMBERCHUCK SIZE(in)BORE & STROKE(in)BLOWSPER MINUTEAIR CONSUMPTION(cfm)AIR INLET(NPT)WEIGHT(lbs)LENGTH(in)68252240-001.680 round11 8 x 5 36003438 NPT or 7 8 -241614 68252243-001.580 hex11 8 x 5 36003438 NPT or 7 8 -241614 68252241-001.680 round11 8 x 5 3/4 22803338 NPT or 7 8 -2418151/4 68252244-001.580 hex11 8 x 5 3/4 22803338 NPT or 7 8 -2418151/4 68252242-001.680 round11 8 x 41/4 18003038 NPT or 7 8 -2418161/2 68252245-001.580 hex11 8 x 41/4 18003038 NPT or 7 8 -2418161/2 AIR INLET(NPT)WEIGHT(lbs)LENGTH(in) NPT or 7 8 -2418151/4 NPT or 7 8 -2418151/4 NPT or 7 8 -2418161/2 NPT or 7 8 -2418161/2 Chipping Hammer — Screw-0n Ball Retainer (No Springs Required)MODELMCH-3SMCH-4SPARTNUMBERCHUCK SIZE(in)BORE & STROKE(in)BLOWSPER MINUTEAIR CONSUMPTION(cfm)68252247-004.680 round11 8 x 33/4 2280333868252250-004.580 hex11 8 x 33/4 2280333868252248-004.680 round11 8 x 41/4 1800303868252251-004.580 hex11 8 x 41/4 18003038Chipping Hammer — Retainers and AccessoriesPART NUMBERDESCRIPTIONREPLACEMENT RETAINERS AND LOCK SPRINGS68722235Retainer, for oval collar steel–chrome finish–standard250012-526Retainer, for round collar steel w/bumper250018-894Rubber bumper replacement for round collar retainer250021-222Retainer, universal ball type (spring)250012-530Lock Spring, heavy duty250013-916Lock Spring, plastic68780341Retainer, for oval collar steel–chrome finish–standard68722755Retainer MLC, oval collar round shank steel68722756Retainer MLC, oval collar hex shank steelWHIP HOSE ASSEMBLIES, 8 X 1/2 ID. 300 PSI RATED HOSE02250152-5853802250152-58478 MNPT air inlet swivel -24 male thread inlet swivel x 2-lug universal quick connectWHIP HOSE WITH SWING COUPLING, 8 X 1/2 ID HOSE W 1 WHIP02250139-7117802250139-71238 -24 male thread air inlet with swing coupling x 2-lug universal quick connect MNPT air inlet with swing coupling x 2-lug universal quick connect7

Drills Designed for Performanceand Operator ProtectionSimplified Ratchet DesignThe M-Series Rock Drills are designed to eliminate conventionalspring ratchet systems by spreading the torque over four check pawlsincreasing durability.Dead Man Safety HandleSullair drills are designed so that the tool automatically stopsoperating when the operator releases the throttle lever.One Control for Drilling and BlowingThe single throttle lever controls all tool functions from off,to blowing only, to progressive drilling speeds.Variable Throttle ControlAllows step less speed control for maximum drilling production.Continuous Hole CleaningBlowing air is directed through the drill rod atall drilling speeds to clear debris from the hole.Limited Parts WarrantySullair provides a one-year limited parts warranty to cover: Manufacturing defects Normal operation wearLatchDead man handleDirect Rotation of the PistonThis feature reduces torque loss and eliminateswearing parts, such as the rifle bar assembly.Less MaintenanceThe unique design of Sullair drills eliminatesmany high wear parts. This means less loss ofpower due to wear, less downtime to replaceworn parts and lower overall maintenance costs.Minimal Lubrication RequiredWith only two parts moving during operation,a noncorrosive distribution valve, less radialpiston movement and high tech alloys, Sullairdrills do not require special rock drill oil.Normal oil carryover from the compressor,combined with moisture in the air, will usuallyprovide sufficient lubrication under normaloperating conditions.Oil ReservoirA built-in oil reservoir assures direct lubrication torotating parts. Use of standard 90 to 140-weight gearlubricant extends the life of critical parts.8One control for drillingand blowingSwivel air inletContinuous hole cleaningOil reservoirDirect rotation of piston

Technical SpecificationsDrilling HammersMODELPARTNUMBERCHUCK SIZE(in)BORE & STROKE(in)BLOWSPER MINUTEAIR CONSUMPTION(cfm)AIR INLET(NPT)WEIGHT(lbs)LENGTH(in)MRD-9682522323/4 Round x 33/4 11 32 x 1 3 8 28002138 915 1 8 x 3 1/4 2 9 32 x 13/4 2300533/4 3421 x 4 1/4 2 9 32 x 13/4 2300533/4 3421 x 3 1/4 2 11 16 x 2 3 8 1800803/4 45.523 1 8 25222878 x 4 1/4 2 11 16 x 2 3 8 1800803/4 45.523 1 8 682522291 x 4 1/4 2 11 16 x 2 3 8 1800803/4 45.523 1 8 6825222478 x 3 1/4 3 x 2 5 8 1800993/4 48.5231/4 6825222578 x 4 1/4 3 x 2 5 8 1800993/4 48.5231/4 682522261 x 4 1/4 3 x 2 5 8 1800993/4 48.5231/4 MRD-9 AccessoriesPART NUMBERDESCRIPTIONWHIP HOSE ASSEMBLIES, 8 X 1/2 ID. 300 PSI RATED HOSE02250152-585 MNPT air inlet swivel38WHIP HOSE WITH SWING COUPLING, 8 X 1/2 ID HOSE W 1 WHIP02250139-712 MNPT air inlet with swing coupling x 2-lug universal quick connect38MRD-30, MRD-40 & MRD-50 AccessoriesPART NUMBERDESCRIPTIONWHIP HOSE WITH SWING COUPLING, 8 X 1/2 ID HOSE W 1 WHIP02250139-7142-lug universal air inlet with swing coupling x 2-lug universal quick connectMRD-50MRD-40MRD-30MRD-99