WIXLIB

GYP. BD. CEILING HGT.11'-0"264" V.I.F.12A4.0T2T25TYP.A4.0 15/16" HD T-GRID CROSS TEES - (4' O.C. MAX)9SIM. TYP.A4.02A1.2N/A22 9/16"V.I.F.COPYRIGHT ASI 2019CONFIDENTIALNOT FOR PRODUCTIONNOT FOR CONSTRUCTION9/25/19MULTIPURPOSE NORTH PROPOSED T-GRID LAYOUTSCALE: 1/4" 1' 0" ARCH REF:N/AGYP. BD. CEILING HGT.11'-0"SAMPLE SHOP DRAWINGS - AUDITION T2165 1/16" V.I.F.24"24"12A4.0A29SIM. TYP.A4.05 TYP.A4.0MULTIPURPOSE CENTER PROPOSED ENLARGED RCPSCALE: 1/4" 1' 0" ARCH REF:15/16" HD T-GRID MAINS - (2' O.C. MAX)24"NOTE: ALL AUDITION 8 PLANKEDGES ARE FIELD CUT - TYP.15/16" HD T-GRID CROSS TEES - (4' O.C. MAX)4A1.2N/APROJECT3A1.2A2T28A4.09SIM. TYP.A4.037 9/16" 37 9/16"V.I.F.V.I.F.24"A22A4.046 9/16"V.I.F.24" 168" V.I.F.T2T2CEILING HGT.10'-6"46 9/16"V.I.F. 12A4.037 9/16" 37 9/16"V.I.F.V.I.F.22 9/16"V.I.F.T2PLANK/GRAIN DIRECTIONT29SIM. TYP.A4.08A4.0 22 9/16"V.I.F.9TYP.A4.0261 1/16" V.I.F.MULTIPURPOSE CENTER PROPOSED T-GRID LAYOUTSCALE: 1/4" 1' 0" ARCH REF:PAGE264" V.I.F.N/ALOCATIONN/AGYP. BD. CEILING HGT.11'-0"9TYP.A4.0T29SIM. TYP.A4.08A4.0T2ARCHITECT261 1/16" V.I.F.37 9/16" 37 9/16"V.I.F.V.I.F.46 9/16"V.I.F.46 9/16"V.I.F.N/A37 9/16" 37 9/16"V.I.F.V.I.F.22 9/16"V.I.F.264" V.I.F. CONTRACTORT29SIM. TYP.A4.0 24"T28A4.015/16" HD T-GRID CROSS TEES - (4' O.C. MAX)5TYP.A4.024"24"12A4.09SIM. TYP.A4.0165 1/16" V.I.F.A224"A2N/A24"A2NOTE: ALL AUDITION 8 PLANKEDGES ARE FIELD CUT - TYP.15/16" HD T-GRID MAINS - (2' O.C. MAX)REPRESENTATIVEDRAWING NORTHRELEASES22 9/16"V.I.F.2A4.0T2CEILING HGT.10'-6" T2 168" V.I.F.12A4.0PLANK/GRAIN DIRECTIONN/ADATEDESCRIPTIONBY9/25/19INITIAL RELEASE------REVISION 1------REVISION 2------REVISION 3------REVISION 4------REVISION 5---INVOICE123455A1.2MULTIPURPOSE SOUTH PROPOSED ENLARGED RCPSCALE: 1/4" 1' 0" ARCH REF:N/A6A1.2MULTIPURPOSE SOUTH PROPOSED T-GRID LAYOUTSCALE: 1/4" 1' 0" ARCH REF:N/ASHEET NUMBERAPPROVED BY--SUBMITTAL DATE9/25/19A1.2TARA LARSONA2MULTIPURPOSE NORTH PROPOSED ENLARGED RCPSCALE: 1/4" 1' 0" ARCH REF:15/16" HD T-GRID MAINS - (2' O.C. MAX)24"NOTE: ALL AUDITION 8 PLANKEDGES ARE FIELD CUT - TYP.Thursday, September 26, 2019 7:41:26 AM1A1.28A4.0T2DO NOT SCALE DRAWINGFIGURED DIMENSIONS ARE TOBE FOLLOWED.READ THISDRAWING IN CONNECTION WITHGENERAL ARCHITECTURALPLANS, STRUCTURAL PLANS,AND OTHER RELATEDDRAWINGS. THESE DRAWINGSR E P R E S E N T A S I ' SUNDERSTANDING ANDINTERPRETATION OF THEARCHITECTURAL DRAWINGSAND HOW ASI PRODUCTSRELATE TO THE PROJECT.ENLARGED REFLECTED CEILING PLANS (RCP)9SIM. TYP.A4.0A2123 Columbia Court North, Chaska,Minnesota 55318 P. 800.527.6253165 1/16" V.I.F.A237 9/16" 37 9/16"V.I.F.V.I.F.24"2A4.046 9/16"V.I.F.24" 168" V.I.F.T2CEILING HGT.10'-6"46 9/16"V.I.F. 12A4.037 9/16" 37 9/16"V.I.F.V.I.F.24"T2PLANK/GRAIN DIRECTIONT29SIM. TYP.A4.08A4.024" 22 9/16"V.I.F.9TYP.A4.0261 1/16" V.I.F.

1297 11/16" V.I.F.9A4.05TYP.A4.0T22A4.09SIM.A4.012A4.0123 Columbia Court North, Chaska,Minnesota 55318 P. 800.527.6253 DO NOT SCALE DRAWINGFIGURED DIMENSIONS ARE TOBE FOLLOWED.READ THISDRAWING IN CONNECTION WITHGENERAL ARCHITECTURALPLANS, STRUCTURAL PLANS,AND OTHER RELATEDDRAWINGS. THESE DRAWINGSR E P R E S E N T A S I ' SUNDERSTANDING ANDINTERPRETATION OF THEARCHITECTURAL DRAWINGSAND HOW ASI PRODUCTSRELATE TO THE PROJECT.PLANK DIRECTIONA2 T2A2 CONFIDENTIALNOTE: ALL AUDITION 8 PLANKEDGES ARE FIELD CUT - TYP.8A4.08A4.0T2T212A4.09A4.0 SIM.9SIM.A4.0385" V.I.F.1A1.3FIRST LEVEL ZONE 1 PROPOSED ENLARGED RCPSCALE: 1/4" 1' 0" ARCH REF:N/A1294 3/4" 24"24"24"23 3/8" V.I.F.PROJECT24"48"160 1/8"VIF48"23 3/8" V.I.F.LOCATION15/16" HD T-GRID MAINS - (2' O.C. MAX)ARCHITECT321 9/16" V.I.F.15/16" HD T-GRID CROSS TEES - (4' O.C. MAX)48"48"N/AN/ACONTRACTORN/A161 7/16"VIF48"912 3/4"VIFREPRESENTATIVE48"N/ADRAWING NORTH382"VIF33 9/16" V.I.F.RELEASESDATEDESCRIPTIONBY9/25/19INITIAL RELEASE------REVISION 1------REVISION 2------REVISION 3------REVISION 4------REVISION 5---INVOICE123452A1.3FIRST LEVEL ZONE 1 PROPOSED T-GRID LAYOUTSCALE: 1/4" 1' 0" ARCH REF:N/ASHEET NUMBERAPPROVED BY--SUBMITTAL DATE9/25/19A1.3TARA LARSON9A4.0NOT FOR PRODUCTIONNOT FOR CONSTRUCTION9/25/19SAMPLE SHOP DRAWINGS - AUDITIONSIM.161 3/8" V.I.F.912 11/16" V.I.F.9SIM.A4.0Thursday, September 26, 2019 7:41:29 AMT2ENLARGED REFLECTED CEILING PLANS (RCP)12A4.0COPYRIGHT ASI 2019PAGE8A4.0 163 1/8" V.I.F.T2

SUSPENSION (BY OTHER)START PATTERNFROM ROOM CENTER1516" H.D. T-BAR GRID MAINS BYOTHER (2'-0" O.C. TYP)1516" HEAVY DUTYT-GRID (BY OTHER)TRIM (AS SPECIFIED)14"CNEX 1 1 4" DOWEL 16" HEAVY DUTYT-GRID (BY OTHER)17A4.0T&G GRID CLIPSAUDITION PLANKERROF2A4.0TYPICAL SECTION DETAILSCALE: 6" 1'-0"ARCH REF:3A4.0N/AOECNEREEFPLANK FACERRFOCEILING PATTERN RCP (OPTION 1 - CENTERED ON PLANK)SCALE: 1/2" 1'-0" ARCH REF:YLNTONGUE SIDERRFO.75"ACOUSTICAL BACKERRECOMMENDEDCNERFEYLNOEREEF15YLNOEJOINTS TO LAND ON FRAMINGFRONT OF PANEL ISOMETRIC4A4.0N/ASCALE: 1 1/2" 1'-0" ARCH REF:1516"HEAVY DUTYT-GRID (BY OTHER)(2X4 LAYOUT TYP)TRIM (AS SPECIFIED)EFERRDO NOT SCALE DRAWINGFIGURED DIMENSIONS ARE TOBE FOLLOWED.READ THISDRAWING IN CONNECTION WITHGENERAL ARCHITECTURALPLANS, STRUCTURAL PLANS,AND OTHER RELATEDDRAWINGS. THESE DRAWINGSR E P R E S E N T A S I ' SUNDERSTANDING ANDINTERPRETATION OF THEARCHITECTURAL DRAWINGSAND HOW ASI PRODUCTSRELATE TO THE PROJECT.RECOPYRIGHT ASI 2019CONFIDENTIALNOT FOR PRODUCTIONNOT FOR CONSTRUCTION9/25/19PERFORATIONS (DO NOTGO THROUGH TO FRONTSIDE OF PANEL)BACK OF PANEL ISOMETRIC7A4.0RIP TONGUE IN FIELDJOINT CENTEREDON GRIDYLONGROOVE SIDEFOPLANK FACEN/AECNTONGUE SIDEACCESS PANEL SEAM (FIELDCUT)GROOVE SIDE123 Columbia Court North, Chaska,Minnesota 55318 P. 800.527.6253SCALE: 1 1/2" 1'-0" ARCH REF:N/AAUDITION PLANK15SSPANELSCALE: 1 1/2" 1'-0" ARCH REF:N/ACNRET&G GRID CLIPROFBRACKETS REQ'D (BY OTHER)T&G GRID CLIP1516" HEAVY DUTYT-GRID (BY OTHER)EFRET&G GRID CLIP4" TYP6" MAXCEILING ISOMETRIC1A4.0EORIP TONGUE IN FIELD1" ACOUSTICAL BACKER (2" AVAILABLE)5A4.0FIELD CUT MITERS TYP.TRIMLINEAR LIGHT DETAIL - PLAN VIEWSCALE: 1" 1'-0"ARCH REF:6A4.0N/AACCESS PANEL DETAILSCALE: 1 1/2" 1'-0" ARCH REF:8A4.0N/ATRIM DETAIL 1SCALE: 3" 1'-0"N/AARCH REF:1516" HEAVY DUTYT-GRID (BY OTHER)(2X4 LAYOUT TYP)15INDEPENDENTLY SUPPORTEDCUSTOMER FIXTURE: FIELD CUTPENETRATIONAUDITION PLANKYLNOE16" HEAVY DUTYT-GRID (BY OTHER)(2X4 LAYOUT TYP)T&G GRID CLIPTRIM @ MITERED CORNER - PLANSCALE: 1 1/2" 1'-0" ARCH REF:N/ARIP TONGUE IN FIELDBACKER RAILS (BY OTHER)T&G GRID CLIPSCREWED TO BACKERRIP TONGUE IN FIELDSUSPENSION (BY OTHER)10A4.0CNEREFLOCATIONFIXED PLANK (BACKSCREWED TO CEILING GRID)N/AFIXED PLANK (BACKSCREWED TO CEILING GRID)TRIM PLATE (BY OTHER)ARCHITECTFIELD CUTLINEAR LIGHT DETAIL - SECTION VIEWSCALE: 1 1/2" 1'-0" ARCH REF:T&G GRID CLIP4" TYP6" MAXERROFT&G GRID CLIP9A4.016" HEAVY DUTYT-GRID (BY OTHER)15PROJECTSUSPENSION(BY OTHER)11A4.0N/AACCESS PANEL SECTIONSCALE: 3" 1'-0"ARCH REF:12A4.0N/ATRIM DETAIL 2SCALE: 3" 1'-0"ARCH REF:N/AN/ACONTRACTORN/AREPRESENTATIVE1516"HEAVY DUTYT-GRID (BY OTHER)(2X4 LAYOUT TYP)N/AIF PENETRATION EXCEEDS2 BOARD WIDTH, SUPPORT3BRACKETS ARE NEEDED(BY OTHER)INDEPENDENTLY SUPPORTEDCUSTOMER FIXTURE: FIELD CUTPENETRATIONOENCSUSPENSION (BY OTHER)IF PENETRATION EXCEEDS2 BOARD WIDTH, SUPPORT3BRACKETS ARE NEEDED(BY OTHER)15HEAVY DUTYT-GRID (BY OTHER)(2X4 LAYOUT TYP)DIFFUSER DETAIL - PLAN VIEWSCALE: 1 1/2" 1'-0" ARCH REF:N/A16"14A4.0YLNINDEPENDENTLY SUPPORTEDCUSTOMER FIXTURE: FIELD CUTPENETRATIONSUPPORT BRACKETFASTENED W/ SCREWSTO PLANKS (BY OTHER)8" MAXIMUMCANTILEVER1516" HEAVY DUTYT-GRID (BY OTHER)WALL ANGLE(BY OTHER)WALL ANGLE(BY OTHER)T&G GRID CLIP15DRAWING NORTH16" HEAVY DUTYT-GRID (BY OTHER)RELEASEST&G GRID CLIPERFET&G GRID CLIPT&G GRID CLIP13A4.0SUSPENSION (BY OTHER)SUSPENSION (BY OTHER)AUDITION PLANKERROFDESCRIPTIONBY9/25/19INITIAL RELEASE------REVISION 1------REVISION 2------REVISION 3------REVISION 4------REVISION 5---15FIELD CUT TO ALLOW FOR 1 2"MIN REVEAL FOR EXPANSIONAND CONTRACTIONFIELD CUT TO ALLOW FOR 1 2" MINREVEAL FOR EXPANSION ANDCONTRACTIONINVOICEDIFFUSER DETAIL - SECTION VIEWSCALE: 1 1/2" 1'-0" ARCH REF:T&G GRID CLIP FOR16" HD T-GRID ONLYDATEN/A15A4.0EDGE DETAIL 3SCALE: 3" 1'-0"ARCH REF:N/A16A4.0EDGE DETAIL 4SCALE: 3" 1'-0"ARCH REF:N/A17A4.0T&G GRID CLIPSCALE: 1' 1'-0"ARCH REF:12345SHEET NUMBERAPPROVED BYN/A--SUBMITTAL DATE9/25/19A4.0TARA LARSONCEHANGER(BY OTHER)8" MAXIMUMCANTILEVERThursday, September 26, 2019 8:04:59 AMACYLNCEILING STANDARD DETAILSINDEPENDENTLY SUPPORTEDCUSTOMER FIXTURE: FIELD CUTPENETRATIONSCRAP 15 16" HD T-GRID BACKERRAILS TO BE BACK SCREWED INFIELDPAGET&G GRID CLIPSAMPLE SHOP DRAWINGS - AUDITION16" HEAVY DUTYT-GRID (BY OTHER)

Panel SQFTLNFTAUDITION 8 PERFORATED CEILING PLANKS, 1.6 MM GROOVES 8MM O.C. PERFORATIONS.CORE 11/16" CLASS A FR PARTICLE BOARD. MAPLE PLAIN SLICED FACE.5497.5962745N/AVENEERED CEILING TRIM 43" X 6" X 96" CLASS A FR PARTICLE BOARD. MAPLE PLAIN SLICED FACEAND EDGES. DOWELED ENDS FOR ALIGNMENT.AUDITION 8 PERFORATED CEILING PLANKS, 1.6 MM GROOVES 8MM O.C. PERFORATIONS.CORE 11/16" CLASS A FR PARTICLE BOARD. CHERRY PLAIN SLICED FACE.108696N/A864657.596325N/AVENEERED CEILING TRIM 43" X 6" X 96" CLASS A FR PARTICLE BOARD. CHERRY PLAIN SLICEDFACE AND EDGES. DOWELED ENDS FOR ALIGNMENT.AUDITION 8 PERFORATED CEILING PLANKS, 1.6 MM GROOVES 8MM O.C. PERFORATIONS.CORE 11/16" CLASS A FR PARTICLE BOARD. CHERRY PLAIN SLICED NEERED CEILING TRIM 43" X 6" X 96" CLASS A FR PARTICLE BOARD. CHERRY PLAIN SLICEDFACE AND EDGES. DOWELED ENDS FOR ALIGNMENT.AUDITION 8 PERFORATED CEILING PLANKS, 1.6 MM GROOVES 8MM O.C. PERFORATIONS.CORE 11/16" CLASS A FR PARTICLE BOARD. CHERRY PLAIN SLICED FACE.17696N/A136587.596290N/AVENEERED CEILING TRIM 43" X 6" X 96" CLASS A FR PARTICLE BOARD. CHERRY PLAIN SLICEDFACE AND EDGES. DOWELED ENDS FOR ALIGNMENT.AUDITION 8 PERFORATED CEILING PLANKS, 1.6 MM GROOVES 8MM O.C. PERFORATIONS.CORE 11/16" CLASS A FR PARTICLE BOARD. CHERRY PLAIN SLICED FACE.17696N/A136CONFIDENTIAL587.596290N/AVENEERED CEILING TRIM 43" X 6" X 96" CLASS A FR PARTICLE BOARD. CHERRY PLAIN SLICEDFACE AND EDGES. DOWELED ENDS FOR ALIGNMENT.AUDITION 8 PERFORATED CEILING PLANKS, 1.6 MM GROOVES 8MM O.C. PERFORATIONS.CORE 11/16" CLASS A FR PARTICLE BOARD. CHERRY PLAIN SLICED FACE.17696N/A136NOT FOR PRODUCTIONNOT FOR /AN/A59191632VENEERED CEILING TRIM 43" X 6" X 96" CLASS A FR PARTICLE BOARD. CHERRY PLAIN SLICEDFACE AND EDGES. DOWELED ENDS FOR ALIGNMENT.AUDITION 8 PERFORATED CEILING PLANKS, 1.6 MM GROOVES 8MM O.C. PERFORATIONS.CORE 11/16" CLASS A FR PARTICLE BOARD. CHERRY PLAIN SLICED FACE.VENEERED CEILING TRIM 43" X 6" X 96" CLASS A FR PARTICLE BOARD. CHERRY PLAIN SLICEDFACE AND EDGES. DOWELED ENDS FOR ALIGNMENT.Totals123 Columbia Court North, Chaska,Minnesota 55318 P. 800.527.6253DO NOT SCALE DRAWINGFIGURED DIMENSIONS ARE TOBE FOLLOWED.READ THISDRAWING IN CONNECTION WITHGENERAL ARCHITECTURALPLANS, STRUCTURAL PLANS,AND OTHER RELATEDDRAWINGS. THESE DRAWINGSR E P R E S E N T A S I ' SUNDERSTANDING ANDINTERPRETATION OF THEARCHITECTURAL DRAWINGSAND HOW ASI PRODUCTSRELATE TO THE PROJECT.COPYRIGHT ASI 2019ACCLIMATION AND STORAGEAUDITION TONGUE & GROOVE CEILING INSTALLATIONAll wood products purchased from ASI must be acclimated to site conditions before installation. Failure to acclimate product willvoid the warranty. This is particularly important in Northern United States climates where low atmospheric humidity typicallycause more wood movement than the higher humidity of Southern climates.Wood naturally varies in color and grain characteristics. It is recommended that planks be presorted before installation to assure auniform final appearance. Plan the plank layout using the centerline of the ceiling such that the cut planks or reveals will be equalin width on both sides. Lay out the T-grid so that T-grid mains run perpendicular to the T&G panels and parallel to the cross-tees.RECEIVINGPrior to unloading a crate from the delivery truck, check it for any obvious shipping damage. If no evidence of damage is presenton the crate, offload it onto a dry/controlled area and inspect it for dents, breakage, or any lesser-noticeable crate damage thatmay affect enclosed panels or trim. If damage has been identified on the crate itself, record it/photograph it, and open the crateto inspect for concealed damage. If damage from the crate was transferred onto the panels or trim, document/photograph theissues.Once the installation site has been acclimatized to the temperature and humidity levels that will be the norm when occupied, allwood products should be moved into the site installation area for a minimum of 72 hours prior to any installation activity. Panelsshould be stored in a dry, fully-conditioned interior space on a flat surface in opened cartons. Relative humidity should bemaintained between 25% and 55%. Temperatures should be maintained between 55 and 80 degrees Fahrenheit. To acclimatewood products, remove all packaging materials from the outside of the crate, leaving only the wood products. Exposure toconditions outside of this range will void the warranty. Panels should be handled with care and set on protective cushions whilecutting.Audition T&G planks are designed to be installed on 15/16” heavy duty T-grid. T-grid mains and cross tees shall conform to heavyduty classification ASTM C635. Install main tees 24” O.C. and not more than 4" from each parallel wall with #12 pre-straightenedgalvanized steel wire not more than 4' O.C., wrapped tightly at least three full turns. Cross tees shall be installed 2' or 4'O.C.Always refer to the T-grid manufacturer's installation instructions. Hanger wire and cross tees are to be installed according to localcodes and seismic requirements. If grid system is existing, use a variable placement of cross tees 4" from each parallel wall toform a 2' module. Install extra hanger wires at lights or as required to support the wood panel system (see sheets 8-13 of thestandard details). Check with the grid system manufacturer for proper O.C. hanger spacing, if in doubt.The Bill of Lading (BOL) must be signed as “Damaged” if any type of claim is required. Failure to do so will disqualify the projectfor any type of claim, and the provided product will be considered accepted as delivered. Furthermore, do not simply estimatethe number of damaged goods; receiving parties are responsible for verifying the actual count of damaged product(s) and notingthe information on the BOL after checking for exact quantities. After signing the BOL as “Damaged”, please accept the deliveryand contact ASI immediately regarding the occurrence. Be prepared to provide a detailed description of the issue(s), an accuratecount of what was affected, information regarding identifiers (panel tags or numbers, etc.), and photographic documentation. Donot install damaged product. Instead, get in touch with ASI as soon as possible so that we may address the issue and provide aworking plan for potential solutions and replacements.Grille products can be left on the crates just as they were packaged. Linear wood planks and flat panels should be carefullystacked with three or four slats stacked face to face and back to back, perpendicular to the stack allowing for air circulation.Separate stacks of flat panels and wood planks on the skids from each other carefully to prevent from scratching the product.Audition T&G planks are installed much like conventional tongue and groove panels. Starter planks must be prepared by rippingthe tongue side of the plank to the proper width. Secure the starter plank to the T-grid with trim screws either through the sawcut on the face of the or back screw through the T-grid (see details 2 & 4 on sheet 6 of the standard details). Confirm that thestarter plank is properly aligned before proceeding. Secure the groove edge of the plank to the T-grid using T&G clips provided. Ifdirect attaching clips to T-grid, do not overtighten screws.ATTENTION: If you have additional Questions after reviewal of this manual please contact your local ASI representative or anASI professional at our headquarters (952)448-5300ASI MANUFACTURES DECORATIVE ACOUSTICAL PANELS AND PRODUCTS THAT MUST BE HANDLED WITH CARE. PANELS SHOULDONLY BE INSTALLED BY EXPERIENCED CARPENTERS.If any panel or trim pieces appear to have manufacturing defects, do not install. ASI's only obligation is replacing materials provedto be defective and that are returned for credit within the terms and conditions of the sale. Damaged material must remaincrated and in customer's possession until a decision on the claim is reached. At that time, the carrier responsible for the deliverywill pick up the damaged product at the delivery site. Do not dispose of damaged product unless otherwise expressly instructed todo so by an ASI representative. In the event this occurs, documented acknowledgment will be required from all parties involved.If no damage is observed, verify that all materials ordered for the job have been received and are in the proper style(s) andcorrect quantities.WARRANTY NOTICEThe above recommended installation instructions are reliable for most installations, but are not meant to imply any warranty orguarantee for which ASI assumes responsibility. This warranty notice does not supersede ASI's Standard 1 Year Warranty.The installer must undertake test

drawing in connection with general architectural plans, structural plans, and other related drawings. these drawings represent asi's understanding and interpretation of the architectural drawings and how asi products relate to the project. invoice approved by contractor architect representative datedescr