Transcription
Straumann Screw-retained Prosthetics
Straumann Screw-retained AbutmentsStraumann Screw-retainedabutmentsIndication and product featuresAbutments for fixed screw-retainedrestorations; for multi-unit and single-unitrestorations Available in different gingiva heights Available with different angulations Compatible with Straumann Bone Level Implants (forNC / RC) Round-off edges and steep abutment connectorangle of 22 Same abutment connector geometry for all platformsto allow small component portfolio Design allows abutment-level impression Consistent Straumann colour coding
Abutment technical featuresRequirements for tilted implant type restorationsShort connectorH: 1.8mmFlat, Wide shoulder0.3mmWide angles17 , 30 , 0 Multiple heights2.5mm, 4mm, 1mm12 BL diameters4.6mm, 3.5mm231 only available for straight abutments // 2 diameter 3.5mm abutments only available in straight version
Abutment technical featuresRequirements for tilted implant type restorationsSame connector designAllows limited coping portfolioRound-off edges45 Steep abutment angle22 Allows multi-unit andsingle unit restorationsCrossFit connectionFor easy positioning4
Abutment connector new features(example RC abutment, straight & angled, GH 2.5mm) New angulations: 17 & 30 Reduced abutment dimensionSame connector geometry limited coping portfolioConnector allows multi-unit as well as single-unit restorations17 4.6mm1mm1mm30 2.5mm 2mmMultibase,straightScrew-retained abutment,straightMultibase,angled 25 Screw-retained abutment, Screw-retained abutment,angled 17 angled 30
Gingiva heights (angled abutments)NC/RC Ø4.6mm17 30 4mm2.5mmScrews (included in abutments and copings)Basal screwOcclusal screw6RC#025.0002NC#025.0002#023.4763
Gingiva heights (straight abutments)NC Ø3.5mmNC/RC Ø4.6mm4mm2.5mm1mmScrews (included in abutments and copings)Basal screwOcclusal screw7GH 1:#023.4749GH 2:#023.4750GH 3:#023.4760#023.47631 indication limitation: single unit only anterior (icentral/lateral incisors), crown/bridge incisors, canines and premolars
Limited Indications for NC 0º Ø3.5 & Ø4.6, GH1.0mm Abutment0 ConnectionD17 NC3.50 17 RC4.6NC4.6Typ1.0GH30 nescaninespremolarspremolarsmolars30 Indication ofNC ImplantsmolarsIndication ofNC ImplantswisdomteethwisdomteethCrownBar / Bridge
CopingsComponents for StraumannScrew-retained abutmentsIndication and product featuresImmediate temporization possible withTitanium copings Titanium copings allow production of temporaryrestoration to be placed in patient’s mouthimmediately Convert existing patient’s denture intotemporary restoration Polymer copings for burn-out techniques Bar copings for conventional final prosthesis
Technical features:Abutment connector design and copingsØ 3.5mmConnector Geometry Straight and angled abutmentswith same abutment connectorgeometry limited copingportfolio Same copings for straight /angled abutments D 4.6mm Same copings for straightabutments D 3.5mmMulti-unit/single unit restoration Engaging/non-engaging featureintegrated in copings10NC*Ø 4.6mmNC**RC*Total 5 copingsTotal 5 copings*available as engaging and nonengaging*available as engaging and nonengagingEngagingNon-Engaging
Technical features:Abutment connector design and copings Compared to the current Multibase coping portfolio the new coping portfolio forStraumann Screw-retained abutment is limited thanks to the new connectorgeometryRC MultibaseStraight, Ø4.5mmNon-engagingengaging11Angled, Ø4.0mmRC Screw-retained abutmentStraight, Ø4.6mmAngled, Ø4.6mm
Technical Feature:Screw-in-screw conceptStraight abutments have a screw-inscrew-concept: The occlusal screw is screwed intothe basal screw For reduced height of the restoration Both screws to be used with the SCSscrewdriver#023.476312
Impression TakingComponents for StraumannScrew-retained abutmentsIndication and product featuresImpression taking on abutment-level: eithertraditional or via scanbodiesTraditional impression-taking On abutment-levelOpen tray or closed trayFor both diameters: Ø3.5 / Ø4.6mmReflects existing Straumann colour codingScanbodies Base for digitally processing CARES hybrid barsand wrap around bars (via dental models) For scanning on abutment-level Internal geometry reflects Screw-retained abutmentdesign For both diameters: Ø3.5 / Ø4.6mm Material PEEK
New Impression components compared toMultibase025.4242, opentray impressionpostsame design, same materialsame procedure025.4241-04, closedtray impression post,plastic post to besnapped ontoabutment025.2244, opentray impressionpost025.2246, closedtray impression post,Metal postscrewed ontoabutment, plasticpositioning cap
Bar copings - dimensionsØ 3.5mmNCSKU: 023.275015Ø 4.6mmNCRCSKU: 023.4752 (same for NC and RC 4.6mm)
Protective caps - dimensionsØ 3.5mmNC16Ø 4.6mmNCRCSKU: 024.2323 / .2324 / .2325 (available in V4)SKU: 024.4323 / .4324 / .4325 (same for NC and RC4.6mm)3 different heights: 5mm / 6.5mm / 8mm3 different heights: 5.1mm / 6.6mm / 8.1mm
Comparison Nobel Biocare Multi-unit Abutmentand Straumann Screw-retained AbutmentStraumannNobel BiocareStraightAngledStraightAngledBL:NC Ø 3.5mmNC Ø 4.6mmRC Ø 4.6mmBL:NC Ø 3.5mmNC Ø 4.6mmRC Ø 4.6mm0 17 / 30 0 17 / 30 1, 2.5, 4mm2.5, 4mm1-5mm depending onimplant type2-5mm depending onimplant typeAbutment DesignImplant DiametersAngulationsGingiva HeightsAuxiliary PortfolioDue to abutment connector design, same copings forstraight and angled abutmentsDifferent abutments for:external connection (Branemark / Nobel Speedy Groovy)- Internal conical connection (Nobel Active / Replace)- Internal Three-Part connection (Nobel Replace / ReplaceSelect / Nobel Speedy Replace)-Different copings for angled and straight abutmentsAbutment Connector DesignConnector HeightAbutment ConnectorAngleShoulder171.8mm1.8mm22 22 , plus round off edges45 Flat and 0.3mm wideFlat and 0.3mm wide 2mm 2mmflatflat
Who is who in the new Straumann Screw-retainedabutment portfolioMultibaseNC Ø3.5NC Ø4.0RC Ø4.0NC Ø4.5RC Ø4.5RC Ø6.50 25 , Type A/B25 , Type A/B0 0 0 Gingiva edAbutmentNC Ø3.5NC Ø4.6RC Ø4.6NC Ø4.6RC Ø4.60 17 / 30 A/B17 / 30 A/B0 0 12.54-2.54-2.5412.5412.54Copings18NC Ø3.5NC/RC Ø4.6,due to the new abutment connector geometry, the new copingsare not compatible with Multibase abutments
Who is who in the new Straumann Screw-retainedabutment portfolio - CopingsMultibaseNC Ø3.5NC Ø4.0RC Ø4.0NC Ø4.5RC Ø4.5RC Ø6.50 25 , Type A/B25 , Type A/B0 0 0 42023.4746023.4761023.4764023.4762023.4766NC Ø3.5NC Ø4.6RC Ø4.6NC Ø4.6RC Ø4.60 17 / 30 A/B17 / 30 A/B0 0 CopingsBridge – GoldBridge – PolymerBar – GoldBar - PolymerScrewretainedAbutmentCopingsTitanium – engagingTitanium – non-eng.Titanium– Bar19Polymer – engagingPolymer – 3.4747023.4751023.4752023.4748023.2755
Product Portfolio for new Screw-retained ProstheticsPlanning Guide20
www.straumann.com
Straumann Screw-retained Abutments Straumann Screw-retained abutments Indication and product features Abutments for fixed screw-retained restorations; for multi-unit and single-unit restorations Available in different gingiva heights Available with different angulations Compatible with Straumann Bone Level Implants (for NC / RC)File Size: 1MB
