Transcription
HPS III-SXE single tipThe solution for single applications
The solution for single applicationsHigh-performancesingle tips HPS III-SXEHPS III-SXE single tips with sealing nearthe gate offer highest process reliabilityfor applications with demanding materials and narrow processing windows.Due to the nozzle design with twoseparate control zones and ceramicelements for additional thermal insulation between pressure tube and nozzlebody a most homogeneous temperatureprofile is achieved. With a maximum processing temperature of 400 CHPS III-SXE single tips are suitable fora broad range of thermoplastics.Gating options for HPS III-SXE single tipsDirect gatingwith tip2Open gatingVarious versions of gate bushes and screwon gate bushes including over-dimensionedversions to adapt to free form contoursMembrane geometry(see page 3)
Features: Flow channel diameter 6 mm, 9 mm and 12 mm, special sizes on request Lengths from 30 mm up to 350 mm, depending on flow channel diameter Nozzle design with 2 control zones Thermal insulation by tip sealing near the gate Additional thermal insulation by ceramic elements between pressure tube and nozzle body Molybdenum tips for optimal thermal conductivity and high wear resistance Tips available with special coating for increased wear resistance Exchangeable thermocouples, heating elements and tip inserts Low pressure loss Short residence time for the melt Most homogeneous temperature profile Good colour changes For processing temperatures up to 400 CShot weights (approximate values):Flow channel ØViscosity6 mm9 mm12 mmwith tipMembrane geometryopenwith tipopenwith tipopenlow100 g120 g300 g140 g800 g1100 g1500 gmedium50 g60 g100 g110 g140 g800 g1100 ghigh10 g20 g40 g70 g100 g120 g140 gHPS III-SXE single tipsallow trouble-freeprocessing of abroad range ofmaterials includinghigh ANAmorphousPEEKLCPHigh rmoplasticsStandardthermoplasticsPPPEPartially cristallineOption for soft materials:The membrane geometryThis special combination of twogating geometries guaranteesexcellent results when processingsoft materials like polyolefines andTPE/TPU. A HPS III nozzle with openinsert is combined with the gate bushgeometry used for a insert with tip.This configuration results in very lowgate vestiges and a surface finishquality which could be only reached byvalve gates up to now. Further advantages are the absolutely string freeprocessing of polyolefines and verygood colour change capabilities.3
Technical data HPS III-SXEHPS III-SXE single tips, 230 V with tip sealing technologyDimensions, flow channel diameters and item numbersFlow channel Ø 6 mmItem number: 93259.Flow channel Ø 9 mmItem number: 93309.Flow channel Ø 12 mmItem number: 93409.Dim. X:Dim. X:Dim. /4’’Z193-01Z193-02Z193-03Available tip/screw-on gate bush combinationswith tipAB1B2openC1C2DEFM Z157-25Ordering exampleNoteExample:Single tip 93259., flow channel Ø 6 mm93259.039-A-040RR0 R15 R40 R1/2’’ R3/4’’ .-000.-015.-040.-1/2.-3/4Tip/screw-on gate bush combinationDim. XNozzle body4Z157-11 Special sizes on request The gate bush is not includedand has to be ordered separately.Please refer to our main catalogue. For item number 93259. only
Locating rings HPS III-SXELocating ring for 93259.Z193-04Pos 1 : 3 x DIN912-M8x30-12.945 Nm lubricatedLocating ring for 93309.Item 3-05Pos 1 : 4 x DIN912-M8x30-12.945 Nm lubricatedItem 5.110127109,851005.125142124,851005.175192174,85
Locating rings HPS III-SXELocating ring for 93409.Z193-06Pos 1 : 5 x DIN912-M10x30-12.985 Nm lubricated6Item numberØAØC51006.125142124,851006.175192174,8
Wiring HPS III-SXEThe nozzle is operated with 2 control zones. The connecting socket 63010.009 (10-pin) is used.The connecting socket is not included and has to be ordered separately.Please follow the wiring instructions below.AConnecting socket,item number 63010.009230 VCable colour:orange (L) / grey (N)ThermoCable colour:black / white - (J type)Option:green / white - (K type)Z193-077
EWIKON 03/2017 EYour EWIKON partner:Technical information subject to alteration.EWIKONHeißkanalsysteme GmbHSiegener Straße 3535066 FrankenbergTel: ( 49) 64 51 / 50 10Fax: ( 49) 64 51 / 50 12 02E-mail: info@ewikon.comwww.ewikon.com
Wiring HPS III-SXE Z193-07. EWIKON Technical information subject to alteration. EWIKON 03/2017 E Heißkanalsysteme GmbH Siegener Straße 35 35066 Frankenberg Tel: ( 49) 64 51 / 50 10 Fax: ( 49) 64 51 / 50 12 02 E-mail: info@ewikon.com www.ewikon.com Your EWIKON partner: Created Date:
