Transcription
La-Pha-Pack GmbH. Telephone 49 (0) 24 23 / 94 31-0 . Fax 49 (0) 24 23 / 94 31-33 . E-Mail: service@la-pha-pack.com . www.la-pha-pack.com6.3 PE Snap Ring Seals ND11.Synthetic RedRubber/PTFE material as a cost-effective match of theAgilent quality. In contrast to Natural Rubber it is not suitable for NEWmultiple injections, however softer for a safe penetration.Snap ring caps are also available in a soft quality with transparent orblue caps. Soft caps are more convenient in handling (pushing on/removal), however, they are less tight than hard caps.NEWSnap ring cap with the design of a crimp cap; therefore suitable forrobotic handlingEasy way of closing the vial: time-, cost- and energy-savingVials can also be sealed with an Aluminium Crimp Seal ND11Blue PE Push-On Cap with thinned penetration point made ofPolyethylene for Snap Ring Vials and Crimp Neck Vials ND116.3.1 With transparent cap, hard or soft versionHard Cap11 15 063511 15 210611 15 063711 15 063611 15 065011 15 2045Art. No.Soft CapNEW11 15 185011 15 198311 15 185211 15 185111 15 185311 15 2046Description CapSepta MaterialDurometer Thickn.PE Snap Ring Cap transparent, 6mm centre holePE Snap Ring Cap transparent, 6mm centre holePE Snap Ring Cap transparent, 6mm centre holePE Snap Ring Cap transparent, 6mm centre holePE Snap Ring Cap transparent, 6mm centre holePE Snap Ring Cap transparent, 6mm centre holeNat. Rubber red-orange/TEF transparentRedRubber/PTFE beige Agilent QualitySilicone white/PTFE redPTFE red/Silicone white/PTFE redSilicone white/PTFE blue, cross-slittedSilicone white/PTFE red, pre-cut (Y)60 shore A45 shore A45 shore A45 shore A55 shore A45 shore A1.0mm1.0mm1.3mm1.0mm1.0mm1.3mmArt. No.Art. No.Description CapSepta MaterialDurometer Thickn.11 15 126711 15 210711 15 115111 15 126811 15 126911 15 204711 15 185611 15 181711 15 185411 15 185711 15 185811 15 2048PE Snap Ring Cap blue, 6mm centre holePE Snap Ring Cap blue, 6mm centre holePE Snap Ring Cap blue, 6mm centre holePE Snap Ring Cap blue, 6mm centre holePE Snap Ring Cap blue, 6mm centre holePE Snap Ring Cap blue, 6mm centre holeNat. Rubber red-orange/TEF transparentRedRubber/PTFE beige, Agilent QualitySilicone white/PTFE redPTFE red/Silicone white/PTFE redSilicone white/PTFE blue, cross-slittedSilicone white/PTFE red, pre-cut (Y)60 shore A45 shore A45 shore A45 shore A55 shore A45 shore ASoft CapNEW1.0mm1.0mm NEW1.3mm1.0mm1.0mm1.3mm NEWPackaging Unit: 100 pcs. per PE-Bag6.3.3 With red cap, only hard versionArt. No.Description CapSepta MaterialDurometerThickn.11 15 132311 15 132511 15 132411 15 1326PE Snap Ring Cap red, 6mm centre holePE Snap Ring Cap red, 6mm centre holePE Snap Ring Cap red, 6mm centre holePE Snap Ring Cap red, 6mm centre holeNat. Rubber red-orange/TEF transparentSilicone white/PTFE redPTFE red/Silicone white/PTFE redSilicone white/PTFE blue, cross-slitted60 shore A45 shore A45 shore A55 shore A1.0mm1.3mm1.0mm1.0mm6.3.4 With green cap, only hard versionPackaging Unit: 100 pcs. per PE-BagNEWArt. No.Description CapSepta MaterialDurometerThickn.11 15 155511 15 201711 15 201811 15 1794PE Snap Ring Cap green, 6mm centre holePE Snap Ring Cap green, 6mm centre holePE Snap Ring Cap green, 6mm centre holePE Snap Ring Cap green, 6mm centre holeNat. Rubber red-orange/TEF transparentSilicone white/PTFE redPTFE red/Silicone white/PTFE redSilicone white/PTFE blue, cross-slitted60 shore A45 shore A45 shore A55 shore A1.0mm1.3mm1.0mm1.0mm6.3.5 With yellow cap, only hard versionNEWPackaging Unit: 100 pcs. per PE-Bag6.3.2 With blue cap, hard or soft versionHard CapNEW6. Snap Ring ND11Art. No.Packaging Unit: 100 pcs. per PE-BagNEWArt. No.Description CapSepta MaterialDurometerThickn.11 15 155611 15 188611 15 167711 15 1793PE Snap Ring Cap yellow, 6mm centre holePE Snap Ring Cap yellow, 6mm centre holePE Snap Ring Cap yellow, 6mm centre holePE Snap Ring Cap yellow, 6mm centre holeNat. Rubber red-orange/TEF transparentSilicone white/PTFE redPTFE red/Silicone white/PTFE redSilicone white/PTFE blue, cross-slitted60 shore A45 shore A45 shore A55 shore A1.0mm1.3mm1.0mm1.0mm6.4 Other Combination Seals for Snap Ring ND11Packaging Unit: 100 pcs. per PE-Bag– Push-On caps can be used as an alternative to snap ring caps with PTFE linerArt. No.Description CapSepta Material11 08 1676PE Push-On Cap, bluewith thinned penetration pointDurometerThickn.Packaging Unit: 100 pcs. per PE-Bag33
La-Pha-Pack GmbH. Telephone 49 (0) 24 23 / 94 31-0 . Fax 49 (0) 24 23 / 94 31-33 . E-Mail: service@la-pha-pack.com . www.la-pha-pack.com7. Plastic Vials ND9 and Plastic Micro-Vials ND9 ND11.Main applications for Plastic vials are atomic absorption, water andprotein analysis, capillary electrophoresis, ion chromatography, etc.1.5ml Polypropylene Short Thread Vial with slightly concave shapedbottom. Usable in HPLC as a possible alternative to silanized glassvials for pH-sensitive and aqueous samples.TPX has a crystal clear transparency and good chemical resistanceAny combination of our plastic vials with one of our seals can beobtained as a 2in1 KITAlso available our so-called TopSerts Vials: transparent and amberTPX Micro-Vials with a Glass Insert (Pages 23 and 32)Special Push-On Cap with thinner penetration point made ofPolyethylene for Snap Ring Vials and Crimp Neck Vials ND117.1 Plastic Vials ND9 and Plastic Micro-Vials ND9 ND11NEWPP7. Plastic Micro-Vials11 19 120511 19 1516NEWPPPPTPXTPXPPPPPPPP11 19 1706 11 19 1707 11 19 1021 11 19 1022 11 19 0932 11 19 0933 11 19 1216 11 19 12171.5mlPP Short Thread Vial,transparent/amberwith filling lines,32 x 11.6mm, slightlyconcave shaped bottom0.7mlPP Short ThreadMicro-Vial,transparent,32 x 11.6mm0.7mlPP Snap RingMicro-Vial,transparent,32 x 11.6mm0.3mlTPX Short ThreadMicro-Vial,crystal clear,32 x 11.6mm0.3mlTPX Snap RingMicro-Vial,crystal clear,32 x 11.6mm0.3mlPP Short ThreadMicro-Vial,transparent,32 x 11.6mm0.3mlPP Snap RingMicro-Vial,transparent,32 x 11.6mm0.3mlPP Short ThreadMicro-Vial,amber,32 x 11.6mm0.3mlPP Snap RingMicro-Vial,amber,32 x 11.6mm100 pcs. per PE-Bag100 pcs. per PE-Bag100 pcs. per PE-Bag100 pcs. per PE-Bag100 pcs. per PE-Bag100 pcs. per PE-Bag100 pcs. per PE-Bag100 pcs. per PE-Bag100 pcs. per PE-Bag7.2 Seals for Plastic Vials ND9 and Plastic Micro-Vials ND9 ND11Type of SealChapterPage(s)Short Thread Seals ND9Snap Ring Seals ND11Crimp Seals ND1111 08 16763.56.35.45.6 6.424-263330-3131 337.3 Special 2in1 KITs2in1 KITs for Waters Art. No. 2in1 KIT11 24 1130Art. No. Vial11 19 0932Art. No. Seal09 15 08692in1 KIT consisting of:11 19 0932,09 15 08690.3ml PP Short Thread Micro-Vial,transparent,32 x 11.6mmPP Short Thread Cap blue,6mm centre hole;Silicone white/PTFE blue,55 shore A, 1.0mm, with slit11 24 186511 19 170609 04 15332in1 KIT consisting of:11 19 1706,09 04 15330.7ml PP Short Thread Micro-Vial,transparent,32 x 11.6mmUltraBond Seal, blue, 6mm centre hole;Silicone beige/PTFE white, 45 shore A, 1.3mm,improved Waters Quality11 24 186611 19 170609 04 15342in1 KIT consisting of:11 19 1706,09 04 15340.7ml PP Short Thread Micro-Vial,transparent,32 x 11.6mmUltraBond Seal, blue, 6mm centre hole;Silicone beige/PTFE white, 45 shore A, 1.3mm,with slit, improved Waters QualityFurther 2in1 KITs are available upon request!34Alternative 2in1 KITs11 24 147611 24 1643Same Vial in combinationwith 09 15 0838(Silicone white/PTFE red,55 shore A, 1.0mm)Same Vial in combinationwith 09 04 1534(UltraBond Seal,slitted)Packaging Unit: 100 pcs. each in one KIT
La-Pha-Pack GmbH. Telephone 49 (0) 24 23 / 94 31-0 . Fax 49 (0) 24 23 / 94 31-33 . E-Mail: service@la-pha-pack.com . www.la-pha-pack.com8. Screw Neck ND13The vials are preferentially used on instruments of the followingmanufacturers: Dionex, Shimadzu, Spark, Varian, VWR (Merck )/Hitachi,Waters (Wisp 48 Position Carousel), etc. (Please have a look at the autosampler.compatibility chart on pages 76-85 to see on which models they can be used)Product line has been enlarged by clear/amber vials withlabel filling linesVials are packed in a cleanroom class 10,000 in recloseable,tamper-proof evident PP-BoxesAny combination of 4ml Screw Neck Vial ND13 with one of our 13mmPP Screw Seals can be obtained as a 2in1 KIT (see chapter 8.5)Upon request barcode labelled vials can also be suppliedFor storage purposes also available with closed top screw sealsAcrylic vial racks with 40 cavities for 4ml vials (s.chapter 18.1)13 09 022213 09 133513 09 028013 09 133640 09 014650 13 01474mlScrew Neck Vial,45 x 14.7mm,clear glass,1st hydrol. class4mlScrew Neck Vial,45 x 14.7mm,clear glass,1st hydrol. class,label filling lines4mlScrew Neck Vial,45 x 14.7mm,amber glass,1st hydrol. class4mlScrew Neck Vial,45 x 14.7mm,amber glass,1st hydrol. class,label filling lines0.3mlMicro-Insert,40 x 6mm,clear glass,1st hydrol. class, 15mm topMetal Spring required!Spring 50 x 7.5mm100 pcs. per PP-Box100 pcs. per PP-Box100 pcs. per PP-Box100 pcs. per PP-Box10 x 100 pcs. per PP-Box100 pcs. per PE-BagFor Micro-Insert40 09 0146!8.2 PP Screw Seals ND13.8. Screw Neck ND13Fill vol. 0.5ml/Usable vol. 0.4ml8.1 Screw Neck Vials ND13 and appropriate Micro-InsertsReady to use combination seals; no time-consuming and “tricky” assemblyNo contamination of the liner with sweat/fat that normally is caused by manualassemblyAvailable as closed or open top screw seals with 13-425 threadTamper-proof evident and recloseable zip-lock bags ensure product safetyBroad variety of different septa materials for almost all applicationsArt. No.Description CapSepta MaterialDurometerThickn.13 15 045613 15 163913 15 081513 15 088713 15 029213 15 129313 15 043913 15 163813 15 0648Polypropylene Screw Cap black, 8.5mm centre holePolypropylene Screw Cap black, 8.5mm centre holePolypropylene Screw Cap black, 8.5mm centre holePolypropylene Screw Cap black, 8.5mm centre holePolypropylene Screw Cap black, 8.5mm centre holePolypropylene Screw Cap black, 8.5mm centre holePolypropylene Screw Cap black, closed topPolypropylene Screw Cap black, closed topPolypropylene Screw Cap black, closed topNat. Rubber red-orange/TEF transparentButyl red/PTFE greySilicone cream/PTFE redSilicone dark blue/PTFE whitePTFE red/Silicone white/PTFE redSilicone white/PTFE blue, cross-slittedNat. Rubber red-orange/TEF transparentButyl red/PTFE greySilicone cream/PTFE red60 shore A55 shore A55 shore A45 shore A45 shore A55 shore A60 shore A55 shore A55 shore her Screw Seals ND13 with closed/open top caps are available upon request!Packaging Unit: 100 pcs. per PE-Bag35
La-Pha-Pack GmbH. Telephone 49 (0) 24 23 / 94 31-0 . Fax 49 (0) 24 23 / 94 31-33 . E-Mail: service@la-pha-pack.com . www.la-pha-pack.com8.3 Septa 12mm12 02 016812 02 022312 02 163512 02 014312 02 060812 02 032212 02 0463PTFE virginal,53 shore D,0.25mm(only unassembled)Nat. Rubber red-orange/TEF transparent,60 shore A,1.3mmButyl red/PTFE grey,55 shore A,1.3mmSilicone cream/PTFE red,55 shore A,1.5mmSilicone blue transp./PTFE white,45 shore A,1.3mmSilicone white/PTFE blue,55 shore A,1.5mmcross-slittedPTFE red/Silicone white/PTFE red,45 shore A,1.0mmPackaging Unit: 1000 pcs. per PE-BagFurther 12mm Septa are available upon request!8.4 PP Screw Caps ND1313 08 016613 08 033613 08 063913 08 0452PolypropyleneScrew Cap,black,8.5mm centre holePolypropyleneScrew Cap,black,closed topPolypropyleneScrew Cap,white,8.5mm centre holePolypropyleneScrew Cap,white,closed topTIPPackaging Unit: 100 pcs. per PE-Bag8.5 Special 2in1 KITsFor Vial Racks please seechapter 18.1 on page 578. Screw Neck ND133in1 KITs for VWR (Merck )/Hitachi and Waters AutosamplerArt. No. 3in1 KITArt. No. VialArt. No. CapArt. No. Septa13 28 107113 09 022213 08 016612 02 01683in1 KIT consisting of:13 09 0222,13 08 0166,12 02 01684ml Screw Neck Vial,45 x 14.7mm,clear glass,1st hydrol. classPolypropyleneScrew Cap,black,8.5mm centre holePTFE virginal,53 shore D,0.25mm13 28 107613 09 028013 08 016612 02 01683in1 KIT consisting of:13 09 0280,13 08 0166,12 02 01684ml Screw Neck Vial,45 x 14.7mm,amber glass,1st hydrol. classPolypropyleneScrew Cap,black,8.5mm centre holePTFE virginal,53 shore D,0.25mmUpon request vials with abarcode label are availablePackaging Unit: 100 pcs. each in one KITOther 2in1 KITsArt. No.2in1 KITArt. No. VialArt. No. SealAlternative2in1 KITs13 28 106713 09 022213 15 045613 28 10722in1 KIT consisting of:13 09 0222,13 15 04564ml Screw Neck Vial,45 x 14.7mm,clear glass,1st hydrol. classPP Screw Cap, black,8.5mm centre hole;Nat. Rubber red-orange/TEF transparent,60 shore A, 1.3mmSame Sealin combinationwith 13 09 0280(amber glass)13 28 106913 09 022213 15 081513 28 10742in1 KIT consisting of:13 09 0222,13 15 08154ml Screw Neck Vial,45 x 14.7mm,clear glass,1st hydrol. classPP Screw Cap, black,8.5mm centre hole;Silicone cream/PTFE red,55 shore A, 1.5mmSame Sealin combinationwith 13 09 0280(amber glass)13 28 107013 09 022213 15 029213 28 10752in1 KIT consisting of:13 09 0222,13 15 02924ml Screw Neck Vial,45 x 14.7mm,clear glass,1st hydrol. classPP Screw Cap, black,8.5mm centre hole;PTFE red/Silicone white/PTFE red,45 shore A, 1.0mmSame Sealin combinationwith 13 09 0280(amber glass)13 28 154113 09 022213 15 12932in1 KIT consisting of:13 09 0222,13 15 12934ml Screw Neck Vial,45 x 14.7mm,clear glass,1st hydrol. classPP Screw Cap, black,8.5mm centre hole;Silicone white/PTFE blue,55 shore A, 1.5mmcross-slittedFurther 2in1 KITs are available upon request!TIPAny combination of 4ml Vials withone of the appropriate seals canbe supplied as 2in1 KIT!TIPFurther 2in1 KITscan be made accordingto your wishes!Packaging Unit: 100 pcs. each in one KIT36TIPFor HPLC Syringe Filters and HPLC SyringeFilters with Glass Fibre Prefilter please seechapter 14 on pages 52 and 53
La-Pha-Pack GmbH. Telephone 49 (0) 24 23 / 94 31-0 . Fax 49 (0) 24 23 / 94 31-33 . E-Mail: service@la-pha-pack.com . www.la-pha-pack.com9. Shell VialsThe vials are preferentially used on instruments of the following manufacturers: Alcott, Gilson, Shimadzu, Waters (Wisp 96 respectively 48Position Carousel) (Please have a look at the autosampler compatibility chart on.pages 76-85 to see on which models they can be used)A handy and inexpensive vial/closure combination for uncritical analyses08 14 1168 08 14 1169 with soft style plug for Waters and ShimadzuPE-Plugs of 08 14 0513/08 14 0595; 11 14 0544/11 14 0545 and15 14 0548/15 14 0562 may be used for the fixation of a Micro-Insert;thus no springs are required for their usageStar-shaped diaphragm enables easy penetration of the PE-PlugRecommended for HPLC usageFor the 1ml Shell Vials a plug with and one without insertion barrier forMicro-Inserts is available. The one without barrier shows a better valveeffect with regard to the formation of a vacuumShell vials and the appropriate plugs can also be supplied as a 2in1 KIT08 14 064108 14 1168*08 14 1169*05 09 070615 14 054815 14 056206 09 06511ml Shell Vial,35 x 7.8mm,clear glass,1st hydrol. class,6mm PE-Plug,transparent,1ml Shell Vial,40 x 8.2mm,clear glass,1st hydrol. class,8mm PE-Plug,soft, without insertionbarrier for Micro-Insert,transparentfor Waters Wisp96 Pos. Carousel,Shimadzu1ml Shell Vial,40 x 8.2mm,amber glass,1st hydrol. class,8mm PE-Plug,soft, without insertionbarrier for Micro-Insert,transparentfor Waters Wisp96 Pos. Carousel,Shimadzu0.1ml Micro-Insert,34 x 5mm,clear glass,1st hydrol. class,13mm top4ml Shell Vial,44.6 x 14.65mm,clear glass,1st hydrol. class,15mm PE-Plug,transparent4ml Shell Vial,44.6 x 14.65mm,amber glass,1st hydrol. class,15mm PE-Plug,transparent0.3ml Micro-Insert,43.45 x 6mm,clear glass,1st hydrol. class,13mm topfor Waters Wisp48 Pos. Carouselfor Waters Wisp48 Pos. Carousel100 pcs.per PP-Box (Vials)100 pcs.per PP-Box (Vials)100 pcs.per PP-Box (Vials)100 pcs.per PP-Box (Vials)100 pcs.per PP-Box (Vials)100 pcs.per PE-Bag (Plugs)100 pcs.per PE-Bag (Plugs)100 pcs.per PE-Bag (Plugs)100 pcs.per PE-Bag (Plugs)100 pcs.per PE-Bag (Plugs)for ALCOTT(only in comb. with08 14 0513 08 14 0595)10 x 100 pcs.per PP-Box9. Shell VialsFill vol. 0.4ml/Usable vol. 0.35mlFill vol. 0.2ml/Usable vol. 0.15ml9.1 Shell Vials 1ml and 4ml and appropriate Micro-Inserts10 x 100 pcs.per PP-Box*In case a Micro-Insert is used in combination with the shell vial, please use 08 14 0513 respectively 08 14 0595, asthey have an insertion barrier for Micro-Inserts. However, please note that flexibility of the plug with insertion barrieris reduced, so that pushing of the plug into the vial as well as penetration is more difficult.37
La-Pha-Pack GmbH. Telephone 49 (0) 24 23 / 94 31-0 . Fax 49 (0) 24 23 / 94 31-33 . E-Mail: service@la-pha-pack.com . www.la-pha-pack.comFill vol. 0.3ml/Usable vol. 0.25mlFill vol. 0.35ml/Usable vol. 0.3mlFill vol. 0.25ml/Usable vol. 0.2ml9.2 Shell Vials 2ml and appropriate Micro-Inserts11 14 054411 14 054506 09 035706 09 066906 09 08662ml Shell Vial,31.5 x 11.6mm,clear glass,1st hydrol. class,12mm PE-Plug,transparent2ml Shell Vial,31.5 x 11.6mm,amber glass,1st hydrol. class,12mm PE-Plug,transparent0.1ml Micro-Insert,31 x 6mm,clear glass,1st hydrol. class,15mm top0.1ml Micro-Insert,31 x 6mm,clear glass,1st hydrol. class,12mm top0.2ml Micro-Insert,31 x 6mm,clear glass,1st hydrol. class,flat bottomfor various instrumentsfor various instrumentsSILANIZED: 06 09 1240100 pcs.per PP-Box (Vials)100 pcs.per PP-Box (Vials)10 x 100 pcs.per PP-Box10 x 100 pcs.per PP-Box10 x 100 pcs.per PP-Box100 pcs.per PE-Bag (Plugs)100 pcs.per PE-Bag (Plugs)9. Shell Vials9.3 Special 2in1 KITsArt. No. 2in1 KITArt. No. VialArt. No. Plug08 27 167008 09 048308 08 04882in1 KIT consisting of:08 14 05131ml Shell Vial,40 x 8.2mm,clear glass, 1st hydrol. class8mm PE-Plug, transparent(with insertion barrier)08 27 167108 09 048408 08 04882in1 KIT consisting of:08 14 05951ml Shell Vial,40 x 8.2mm,amber glass, 1st hydrol. class8mm PE-Plug, transparent(with insertion barrier)08 27 167208 09 048308 08 11672in1 KIT consisting of:08 14 11681ml Shell Vial,40 x 8.2mm,clear glass, 1st hydrol. class8mm PE-Plug, transparent(without insertion barrier)08 27 167308 09 048408 08 11672in1 KIT consisting of:08 14 11691ml Shell Vial,40 x 8.2mm,amber glass, 1st hydrol. class8mm PE-Plug, transparent(without insertion barrier)11 27 106311 09 053712 08 05462in1 KIT consisting of:11 14 05442ml Shell Vial,31.5 x 11.6mm,clear glass, 1st hydrol. class12mm PE-Plug, transparent11 27 106411 09 053812 08 05462in1 KIT consisting of:11 14 05452ml Shell Vial,31.5 x 11.6mm,amber glass, 1st hydrol. class12mm PE-Plug, transparent15 27 106515 09 053915 08 05472in1 KIT consisting of:15 14 05484ml Shell Vial,44.6 x 14.65mm,clear glass, 1st hydrol. class15mm PE-Plug, transparent15 27 106615 09 054015 08 05472in1 KIT consisting of:15 14 05624ml Shell Vial,44.6 x 14.65mm,amber glass, 1st hydrol. class15mm PE-Plug, transparentPackaging Unit: 100 pcs. each in one KIT38TIPAny combination of 1ml Shell Vialswith one of the appropriate PE-Plugs canbe supplied as 2in1 KIT!TIPAny combination of 2ml or 4ml Shell Vialswith one of the appropriate PE-Plugs canbe supplied as 2in1 KIT!
La-Pha-Pack GmbH. Telephone 49 (0) 24 23 / 94 31-0 . Fax 49 (0) 24 23 / 94 31-33 . E-Mail: service@la-pha-pack.com . www.la-pha-pack.com10. Headspace ND20 (ND18)Chapter 10 “Headspace” of our catalogue has been completelyredesigned, in order to simplify the identification of suitable consumables for a certain instrument. Especially in Headspace this is extremely difficult, as besides numerous vial types there are also differentcap types required depending on the autosampler.While you can take the suitable vial type for the different instrumentmanufacturers from the upper part of the double paged chart, you’llfind the appropriate recommended closures in the middle section.The various cap types that have to be considered are colour-coded.At the bottom of the page a break-down of the indicated part numbers according to the colour-coded cap types and the different septamaterials is listed. For better illustration of the septa type you’ll findat the left side of page 40 (20mm septa for crimp caps) resp. at theright side of page 41 (17.5mm septa for magnetic Precision ThreadCaps) photographs and article descriptions of them. Of course youcan also take appropriate recommendations from our Quick-Reference-Charts on pages 70 to 75.As Headspace vials have to withstand high internal pressure, almost all vials on the next page have a wall thickness of 1.2mm. Thus it is guaranteed that the vial will not burst. Contrary to a widely spread opinion, the seal andnot the vial represents the weakest part of the whole sytem. Under pressure the septa will bulge against the Aluminium cap with such a force that the cap is torn apart. By own testing we varified that e.g. our PerkinElmer vial20 09 0297 can easily withstand 10 bars or more while the seal is torn apart at around 10 bars when no pressurerelease system – like our Headspace Cap – is used.Headspace Vials might differ in:Volume (5ml, 10ml, 20ml)Rounded or flat bottomA rounded bottom is more sturdy and thus moreresistant to the high pressure within the vial duringthe heating process. Furthermore the vial slides moreeasily into the heating block when being transportedby a magnet.A flat bottom might be necessary when vials have torun within the instrument on a slightly downwardstendency.Bevelled top or flat DIN Crimp Neck / Screw NeckA bevelled top Headspace Neck might be requiredfor some special closure systems (PerkinElmer),however, a liner has more surface to lie on with a flatDIN Crimp Neck. The more surface for the liner torest on, the tighter the seal.Length of the Neck (instrument specific)Clear / Amber GlassWith / without label and filling linesUpon request with a barcode label.Headspace Closures might differ in:.Type of CapCentre Hole Crimp Cap, Headspace Cap, Centre TearOff Cap, Complete Tear Off Cap, Magnetic CrimpCap with 5mm or 8mm centre hole, Bimetal Cap,Magnetic Screw Cap (with 8mm centre hole or closedtop), PP Screw Cap, PE Cap.Screw Caps are a novelty in the crimp neckdominated Headspace area. However, theyrepresent a ready to use, convenient solution, thatdoes not require any additional tools (crimpers,decappers). Thus samples can be taken and sealedout in the field without the necessity of sampletransfer later in the lab. The magnetic Screw Sealscan be used universally for Headspace as wellas for SPME.Type of LinerButyl, Butyl/PTFE, Pharma-Fix-Liner (Butyl/PTFE),Silicone/PTFE, Silicone/Aluminium foil, Viton, NaturalRubber/TEFBesides the material the liners may differ inthickness, hardness ( shore A), colour, type of PTFElamination, grade of Silicone (UltraClean).10. Headspace ND20 (ND18)IMPORTANT SAFETY TIP:.39
La-Pha-Pack GmbH. Telephone 49 (0) 24 23 / 94 31-0 . Fax 49 (0) 24 23 / 94 31-33 . E-Mail: service@la-pha-pack.com . www.la-pha-pack.com10.1 Headspace Vials Closures ND20 ND18 (Headspace Compatibility Chart)Scale 1:3Original size p.s. 9420 02 0122Moulded SeptaButyl, dark grey,55 shore A, 3.0mmArticle-No.20 09 079520 09 0796Description10ml Headspace-Vial,flat bottom46 x 22.5mm20ml Headspace-Vials,flat bottom75.5 x 22.5mmFor use oninstrumentsAgilent, Carlo Erba,DANI, FisonsAgilent, Carlo Erba, DANI,Fisons20 02 0057Moulded SeptaButyl/PTFE, grey,50 shore A, 3.0mmRemarks20 02 0035Pharma-Fix-Septa(Butyl/PTFE),50 shore A, 3.0mm20 02 014110. Headspace ND20 ND18Silicone blue transp./PTFE white,45 shore A, 3.0mm20 02 2054Silicone blue transp./PTFE transp.,45 shore A, 3.0mm20 02 0638Silicone white/PTFE beige,45 shore A, 3.2mm(Agilent HT Quality)20 02 0335Silicone white/Aluminium foil silver,50 shore A, 3.0mm20 10 029020mmButyl Injection Stopper, greyrec. by PerkinElmerAgilent G1888A,Agilent HS 7694(DANI HS 39.50/HS 86.50)Agilent CTC Combi PalCTC Combi PAL (HS Mode)(Gerstel MPS 2/Varian)CTC Combi PAL (SPME Mode)(Gerstel MPS 2/Varian)CTC HS 500HTA HT200HPerkinElmer HS620 09 140520 09 169120 09 122210ml Headspace-Vial,rounded bottom46 x 22.5mm20 09 087320 09 169020ml Headspace-Vial,rounded bottom75.5 x 22.5mm20ml SPME Vial,rounded bottom75.5 x 22.5mmCarlo Erba, CTC PAL(Varian, Gerstel, Atas,Shimadzu), Fisons, Varian,Thermo ScientificCTC PAL (Varian, Gerstel,Atas, Shimadzu)Thermo ScientificTriPlus HS ***SPME Vial forCTC PAL*** not suitable for Thermo Scientific HS250/HS500Autosampler Compatibility20 03 0030/20 03 090120 03 0030/20 03 090120 03 0264/20 03 082820 03 0264/20 03 082820 03 0975 20 03 1536 20 03 0975 20 03 153620 03 1246/20 03 126420 03 066520 03 0142/20 03 0901PerkinElmer HS40 / HS100 /HS101TurboMatrixTM HS16 /HS40 /HS40XL / HS40 Trap / HS110 /HS110 TrapShimadzu AOC-5000(HS Mode)Shimadzu AOC-5000(SPME Mode)Thermo Scientific HS250/HS500(Carlo Erba/Fisons/ThermoScientific)Thermo Scientific HS800(Carlo Erba/Fisons/ThermoScientific)Thermo Scientific HS850(Carlo Erba/ Fisons/ ThermoScientific)Thermo Scientific HS2000,Thermo Scientific TriPlus(HS Mode)Thermo Scientific TriPlus(SPME Mode)Tekmar HT 320 03 066520 03 0142/20 03 090120 03 0975 20 03 1536 20 03 0975 20 03 153620 03 1246/20 03 126420 03 0711/20 03 0665/20 03 071020 03 0711/20 03 0665/ 20 03 0711/20 03 0665/20 03 071020 03 0710Varian CP-9020/9025, CP-9060Varian Genesissame closures for Genesis20 03 0142/20 03 0901/20 03 0127/20 03 0030/20 03 005920 03 0142/20 03 0901/20 03 0127/20 03 0030/20 03 005920 03 0142/20 03 0901/20 03 0127/20 03 0030/20 03 005920 03 0142/20 03 0901/20 03 0127/20 03 0030/20 03 005920 03 0142/20 03 090120 03 0142/20 03 090120 03 0142/20 03 0901/20 03 0030/20 03 0059Break-down Headspace-SealsAluminium Crimp Cap,plain, 10mm centre hole20 03 0127with Butyl, dark grey, 55 shore A, 3.0mm20 03 0059with Butyl/PTFE, grey, 50 shore A, 3.0mm20 03 0030with Pharma-Fix-Septa, Butyl/PTFE, 50 shore A, 3.0mm20 03 0142with Silicone blue transp./PTFE white, 45 shore A, 3.0mm20 03 0901with Silicone white/PTFE beige, 45 shore A, 3.2mm20 03 0327with Silicone white/Aluminium foil silver, 50 shore A, 3.0mm40Headspace-Cap,clear lacquered(pressure release cap)20 03 0126with Butyl, dark grey, 55 shore A, 3.0mm20 03 0112with Butyl/PTFE, grey, 50 shore A, 3.0mm20 03 0264with Pharma-Fix-Septa, Butyl/PTFE, 50 shore A, 3.0mm20 03 0163with Silicone blue transp./PTFE white, 45 shore A, 3.0mm20 03 0828with Silicone white/PTFE beige, 45 shore A, 3.2mm20 03 0326with Silicone white/Aluminium foil silver, 50 shore A, 3.0mmMagneticCrimp Cap,gold, 5mm centre hole20 03 0711with Butyl, dark grey, 55 shore A, 3.0mm20 03 0710with Pharma-Fix-Septa, Butyl/PTFE, 50 shore A, 3.0mm20 03 0665with Silicone blue transp./PTFE transp., 45 shore A, 3.0mm
La-Pha-Pack GmbH. Telephone 49 (0) 24 23 / 94 31-0 . Fax 49 (0) 24 23 / 94 31-33 . E-Mail: service@la-pha-pack.com . www.la-pha-pack.com10.1 Headspace Vials Closures ND20 ND18 (Headspace Compatibility Chart) (cont.)17 02 158018 09 130618 09 131018 09 130718 09 1311CTC Combi PAL(Varian, Gerstel,Atas, Shimadzu),PerkinElmer*, AgilentCTC Combi PAL(Varian, Gerstel,Atas, Shimadzu),PerkinElmer*, Agilent20 09 034210ml Precision Thread Vials, 20ml Precision Thread Vials,rounded bottomrounded bottom46 x 22.5mm75.5 x 22.5mm20 09 029720 09 122320 09 044020 09 080120 09 08025ml Headspace-Vial,rounded bottom38.2 x 22mm20ml Headspace-Vial,rounded bottom75.5 x 23mm20ml Headspace-Vial,rounded bottom75.5 x 23mm5ml/10ml Crimp Neck Vial,flat bottom38 x 20mm/54.5 x 20mmPerkinElmer**PerkinElmer, TekmarPerkinElmer, TekmarVarianSilicone white/PTFE red,45 shore A,1.3mm17 02 1417Silicone blue transparent/PTFE white, 45 shore A,1.3mm* for TurboMatrixTM 16, 40 and 110, produced after the 01.09.2006 / ** not suitable for TurboMatrixTM 110Autosampler Compatibility18 03 1414(only for G1888A)17 02 131818 03 141418 03 1578/18 03 130918 03 141418 03 1578/18 03 130918 03 1414/18 03 2063Silicone white/PTFE blue,55 shore A,1.5mm20 03 0126/20 03 011220 03 0264/20 03 016320 03 0326/20 03 082820 03 0127/20 03 005920 03 0030/20 03 014220 03 0327/20 03 0901see PerkinElmer HS6see PerkinElmer HS6see PerkinElmer HS6see PerkinElmer HS6see PerkinElmer HS6see PerkinElmer HS618 03 1309/18 03 141618 03 187418 03 1578/18 03 130918 03 141418 03 1578/18 03 130918 03 1414/18 03 206317 02 1415Butyl red/PTFE grey,55 shore A,1.6mm17 02 187318 03 1578/18 03 130918 03 141418 03 1578/18 03 130918 03 1414/18 03 2063Silicone white/Aluminiumfoil silver, 50 shore A,1.3mm20 03 0030/20 03 005920 03 0142/20 03 090120 03 0030/20 03 005920 03 0142/20 03 090110. Headspace ND20 ND1818 03 1578/18 03 130918 03 141418 03 1578/18 03 130918 03 1414/18 03 2063Vials: 100 pcs. per PP-BoxClosures: 100 pcs. per PE-BagSepta: 1000 pcs. per PE-BagStoppers: 100 pcs. per PE-BagBreak-down Headspace-SealsMagneticCrimp Cap,gold, 8mm centre hole20 03 0975with Silicone blue transp./PTFE transparent, 45 shore A, 3.0mm20 03 1246with Silicone white/PTFE blue, 55 shore A, 1.5mm20 03 1264with Viton black, 70 shore A, 1.0mmMagneticBimetal-Cap,red/silver, 8mm centre hole20 03 1536with Silicone blue transparent/PTFE transparent, 45 shore A, 3.0mmMagn. Precision ThreadScrew Cap,silver, 8mm centre hole18 03 1416with Butyl red/PTFE grey, 55 shore A, 1.6mm18 03 1309with Silicone blue transp./PTFE white, 45 shore A, 1.3mm18 03 1578with Silicone white/PTFE red, 45 shore A, 1.3mm18 03 1414with Silicone white/PTFE blue, 55 shore A, 1.5mm18 03 2063with Silicone white/PTFE red, 55 shore A, 1.5mm, pre-cut star for SPME18 03 1874Silicone white/Aluminium foil silver, 50 shore A, 1.3mm41
La-Pha-Pack GmbH. Telephone 49 (0) 24 23 / 94 31-0 . Fax 49 (0) 24 23 / 94 31-33 . E-Mail: service@la-pha-pack.com . www.la-pha-pack.com10.2 Other Crimp Neck Vials ND20 Screw Neck Vials ND1820 09 034320ml Headspace-Vial,75.5 x 23mm,clear glass,1st hydrol. class,rounded bottom,with screw thread ND18100 pcs. per PP-BoxScale 1:2, Original size: P. 93100ml Crimp Neck Vial,94.5 x 51.6mm,clear glass,3rd hydrol. classScale 1:2, Original size: P. 9350ml Crimp Neck Vial,101 x 31mm,clear glass,1st hydrol. clas
La-Pha-Pack GmbH . Telephone 49 (0) 24 23 / 94 31-0 . Fax 49 (0) 24 23 / 94 31-33 . E-Mail: service@la-pha-pack.com . www.la-pha-pack.com 34 11 19 1205 11 19 1516 11 19 1706 11 19 1707 11 19 1021 11 19 1022 11 19 0932 11 19 0933 11 19 1216 11 19 1217 1.5ml PP Short Thread Vial, transparent/amber with filling lines, 32 x 11.6mm, slightly .
