Transcription
Safety Analysis Report for PackagingSafkeg–LS Design No. 3979APackage Docket No. 07109337Application for Approval by the NRCApplicant: Croft Associates Limited
SAFKEG-LS 3979ADocket No. 07109337CTR 2008/10, Revision 8Page 0-1CONTENTSChapter 0 SARP STATUS AND CONTENTS . 0-10.1 SARP REVISION STATUS . 0-20.2 PAGE AND SUPPORTING DOCUMENT REVISION STATUS . 0-3Chapter 0 SARP STATUS AND CONTENTSThis Safety Analysis Report for Packaging (SARP) has been prepared by Croft Associates Ltdfor the new approval of the SAFKEG-LS Design No. 3979A transport package as a Type B(U)design.This section (Section 0) defines the document status and lists the contents of the SARP (SARPsections and appended documents included in the SARP).This SARP is a controlled document under the Croft Associates Ltd Quality Assurance Programapproved by the NRC under Approval Number 71-0939.Revisions are on a page control basis, with revisions indicated by a vertical change bar in theright hand margin.Reference documents, which are listed in the Appendices to each section, are those available inthe general literature and are not provided in the SARP.Supporting documents are those developed specifically for the SARP and are provided in thesection that is most closely associated with the document. These supporting documents are listedin this section, together with their revision status.Document control for the supporting documents, which have been produced by differentorganizations at different times with different styles, is established by reference designations andissue status and/or date: there is no significance in the various policies of adding the names ofauthor, checker or approver or whether they are manually or electronically signed.CTR2008-10-R8-Sc0-v3-Status and Contents.docxNovember 2021
SAFKEG-LS 3979ADocket No. 07109337CTR 2008/10, Revision 8Page 0-20.1 SARP REVISION STATUSTitleSAFKEG-LS 3979ADocket No. 07109337NumberCTR 2008/10IssueRevision 8FileReference[CTR2008-10-R8-Sc0-v3-Status andContents.docx]CheckedCompiledA L FergusonApprovedM B JohnsonDate19 November 2021A L FergusonCroft Associates Ltd F4 Culham Science Centre Abingdon Oxon OX14 3DB UK Tel 44 (0)1865 407740CTR2008-10-R8-Sc0-v3-Status and Contents.docxNovember 2021
SAFKEG-LS 3979ADocket No. 07109337CTR 2008/10, Revision 8Page 0-30.2 PAGE AND SUPPORTING DOCUMENT REVISION ntsSection 0 – Page and Supporting Document Revision StatusPage 0-1 to 11Rev 8Section 1 - GENERAL INFORMATIONPage 1-1Rev 6Page 1-2Rev 4Page 1-3Rev 4Page 1-4Rev 4Page 1-5Rev 4Page 1-6Rev 4Page 1-7Rev 4Page 1-8Rev 4Page 1-9Rev 4Page 1-10Rev 4Page 1-11Rev 4Page 1-12Rev 4Page 1-13Rev 4Page 1-14Rev 4Page 1-15Rev 4Page 1-16Rev 4Page 1-17Rev 4Page 1-18Rev 4Page 1-19Rev 4Page 1-20Rev 4Page 1-21Rev 4Page 1-22Rev 4CTR2008-10-R8-Sc0-v3-Status and Contents.docxNovember 2021
SAFKEG-LS 3979ADocket No. 07109337Page/DocumentReferenceCTR 2008/10, Revision 8Page 0-4IssueStatusPage 1-23Rev 4Page 1-24Rev 4Page 1-25Rev 4Page 1-26Rev 4Page 1-27Rev 5Page 1-28Rev 4Page 1-29Rev 4Page 1-30Rev 4Page 1-31Rev 4Page 1-32Rev 4Page 1-33Rev 4Page 1-34Rev 4Page 1-35Rev 4Page 1-36Rev 4Page 1-37Rev 4Page 1-38Rev 4Page 1-39Rev 4Title/CommentsDocuments in Section 1.3 AppendixDocuments in Section 1.3.2 Calculation Model Drawings0C-6049Issue ASafkeg-LS Construction1C-6097Issue AContainment Vessel LS Lid Construction1C-6099Issue AContainment Vessel LS Body ConstructionDocuments in Section 1.3.3 Licensing DrawingsCTR2008-10-R8-Sc0-v3-Status and Contents.docxNovember 2021
SAFKEG-LS 3979ADocket No. 07109337Page/DocumentReferenceCTR 2008/10, Revision 8Page 0-5IssueStatusTitle/Comments1C-6040Issue HCover sheet for Safkeg-LS design no. 3979A (licensingdrawing)0C-6041Issue CSafkeg-LS design no. 3979A (licensing drawing)0C-6042Issue FKeg design no. 3979 (licensing drawing)0C-6043Issue CCork set for Safkeg-LS (licensing drawing)1C-6044Issue FContainment vessel design no. 3980 (licensing drawing)1C-6045Issue EContainment vessel lid (licensing drawing)1C-6046Issue EContainment vessel body (licensing drawing)2C-6171Issue CLS-12x65-Tu insert design no. 3984 (licensing drawing)2C-6172Issue CLS-31x73-Tu insert design no. 3983 (licensing drawing)2C-6175Issue DLS-50x103-SS insert design no. 3986 (licensingdrawing)Documents in Section 1.3.4 Supporting DocumentsPCS 036Issue DPackage Contents Specification for Safkeg-LS Package Design No 3979ASection 2 - STRUCTURAL EVALUATIONPage 2-1Rev 4Page 2-2Rev 4Page 2-3Rev 7Page 2-3aRev 7Page 2-4Rev 4Page 2-5Rev 4CTR2008-10-R8-Sc0-v3-Status and Contents.docxNovember 2021
SAFKEG-LS 3979ADocket No. 07109337Page/DocumentReferenceCTR 2008/10, Revision 8Page 0-6IssueStatusPage 2-6Rev 4Page 2-7Rev 4Page 2-8Rev 4Page 2-9Rev 4Page 2-10Rev 4Page 2-11Rev 4Page 2-12Rev 4Page 2-13Rev 4Page 2-14Rev 4Page 2-15Rev 4Page 2-16Rev 4Page 2-17Rev 4Page 2-18Rev 4Page 2-19Rev 7Page 2-20Rev 4Page 2-21Rev 4Page 2-22Rev 4Page 2-23Rev 4Page 2-24Rev 5Page 2-25Rev 4Page 2-26Rev 4Page 2-27Rev 4Page 2-28Rev 4Page 2-29Rev 4Page 2-30Rev 4Page 2-31Rev 4Page 2-32Rev 4Page 2-33Rev 4CTR2008-10-R8-Sc0-v3-Status and Contents.docxTitle/CommentsNovember 2021
SAFKEG-LS 3979ADocket No. 07109337Page/DocumentReferenceCTR 2008/10, Revision 8Page 0-7IssueStatusPage 2-34Rev 4Page 2-35Rev 4Page 2-36Rev 4Page 2-37Rev 4Page 2-38Rev 4Page 2-39Rev 7Page 2-40Rev 4Page 2-41Rev 4Page 2-42Rev 4Page 2-43Rev 4Page 2-44Rev 4Page 2-45Rev 4Page 2-46Rev 4Page 2-47Rev 4Page 2-48Rev 4Page 2-49Rev 4Page 2-50Rev 4Page 2-51Rev 4Page 2-52Rev 4Page 2-53Rev 7Page 2-54Rev 4Page 2-55Rev 4Page 2-56Rev 4Page 2-57Rev 4Page 2-58Rev 4Page 2-59Rev 4Page 2-60Rev 4Page 2-61Rev 4CTR2008-10-R8-Sc0-v3-Status and Contents.docxTitle/CommentsNovember 2021
SAFKEG-LS 3979ADocket No. 07109337Page/DocumentReferenceCTR 2008/10, Revision 8Page 0-8IssueStatusPage 2-62Rev 4Page 2-63Rev 7Page 2-63aRev 7Page 2-64Rev 4Page 2-65Rev 7Page 2-66Rev 7Title/CommentsDocuments in Section 2.12.2, AppendixCTR 2009/21Issue DPrototype Safkeg-LS 3979A/0002 NCT and HACRegulatory Test ReportCTR 2009/27Issue APrototype SAFKEG LS 3979A/0002 NCT and HACRegulatory Test ReportSERCO/TAS/002762/01Issue 1Compression Testing of CorkVectra, 925-3272/R1Rev 6Stress Analysis of Safkeg LS 3979A ContainmentVesselCS 2009/08Issue ASAFKEG LS 3979A – Maximum Pressure in CVCS 2010/11Issue BCalculation of the Density of the 3977A PackageVectra, 925-3274/R1Vectra, 925-3272/M2Rev 1Safkeg LS 3979A – Additional HAC Case15/03/10 Safkeg LS 3979A – Mesh Sensitivity AnalysisSection 3 - THERMAL EVALUATIONPage 3-1 to 3-29Rev 8Rev 8 Changes:Entire section raised to Rev 8, pages renumbered.Section 3.2.2, page 3-11: 1st paragraph changed toreduce NCT test temperature from 150oC to 130oCNote (second paragraph, added.CTR2008-10-R8-Sc0-v3-Status and Contents.docxNovember 2021
SAFKEG-LS 3979ADocket No. 07109337CTR 2008/10, Revision 8Page Section 3.5.2, page 3-30: CTR 2021/22 and CTR2021/24 added.Documents in Section 3.5.2, AppendixSERCO/TAS/5388/001Issue 2Thermal Analysis of the Safkeg LS DesignSERCO CJF1030231 Mar10Response to comments on thermal performance ofSAFKEG LS raised by NRC assessorCS 2010/16Issue ASAFKEG LS 3979A – Maximum Temperature of CVInsertsIssue A3979A O-ring NCT Test Temperature Reduction SARP ImpactDocument added in Rev 8 to justify NCT seal testtemperature reduction.Issue ALS 3979A (3980) O-ring SealThermal TestsDocument added in Rev 8 to provide test evidence forNCT seal test temperature reduction.CTR 2021/22CTR2021/24Section 4 - CONTAINMENTPage 4-1Rev 4Page 4-2Rev 4Page 4-3Rev 4Page 4-4Rev 4Page 4-5Rev 4Page 4-6Rev 4Page 4-7Rev 4Page 4-8Rev 4Documents in Section 4.5.2, AppendixCS 2009/06Issue ASAFKEG-LS # 3979A - CV seal leak size for leaktightconditionCS 2009/07Issue BSAFKEG-LS 3979A - Gas contents limit for leaktightconditionCTR2008-10-R8-Sc0-v3-Status and Contents.docxNovember 2021
SAFKEG-LS 3979ADocket No. 07109337Page/DocumentReferenceCTR 2008/10, Revision 8Page 0-10IssueStatusTitle/CommentsSection 5 - SHIELDING EVALUATIONPage 5-1Rev 5Page 5-2Rev 4Page 5-3Rev 4Page 5-4Rev 6Page 5-4aRev 6Page 5-5Rev 4Page 5-6Rev 4Page 5-7Rev 4Page 5-8Rev 6Page 5-9Rev 4Page 5-10Rev 4Page 5-11Rev 4Page 5-12Rev 5Page 5-12aRev 5Page 5-13Rev 4Page 5-14Rev 6Documents in Section 5.5.2, AppendixCTR2009/22Issue BSAFKEG LS 3979A: Package Activity Limits Based onShieldingCTR 2015/10Issue AUncertainties Associated with the Proposed ShieldingCalculation Method for the SAFKEG-LS 3979A PackageSERCO/TAS/003191/001Issue 1Monte Carlo Modelling of Safkeg LS ContainerSection 6 - CRITICALITY EVALUATIONPage 6-1Rev 4Page 6-2Rev 4CTR2008-10-R8-Sc0-v3-Status and Contents.docxNovember 2021
SAFKEG-LS 3979ADocket No. 07109337Page/DocumentReferenceCTR 2008/10, Revision 8Page 0-11IssueStatusTitle/CommentsDocuments in Section 6.9, AppendixNone-Section 7 - OPERATING PROCEDURESPage 7-1Rev 4Page 7-2Rev 4Page 7-3Rev 4Page 7-4Rev 4Page 7-5Rev 4Page 7-6Rev 4Page 7-7Rev 4Documents in Section 7.5, AppendixNone-Section 8- ACCEPTANCE TESTS AND MAINTENANCE PROGRAMPage 8-1 to 8-12Rev 8Rev 8 Changes:Entire section raised to Rev 8, pages renumbered.Section 8.1.5.2, page 8-3, 1st, 2nd and 6th paragraphs.NCT O-ring seal test remperature reduced from 150oCto 130oC (130 to 135oC range).Documents in Section 8.3, AppendixNone-CTR2008-10-R8-Sc0-v3-Status and Contents.docxNovember 2021
Prototype Safkeg-LS 3979A/0002 NCT and HAC Regulatory Test Report . CTR 2009/27 . Issue A ; Prototype SAFKEG LS 3979A/0002 NCT and HAC Regulatory Test Report SERCO/TAS/002762/01. Issue 1. Compression Testing of Cork. Vectra, 925-3272/R1 . Rev 6 ; Stress Analysis of Safkeg LS 3979A Containment Vessel . CS 2009/08 ; Issue A . SAFKEG LS 3979A .
