Transcription
ULTRASONICTRANSDUCERSContactHigh FrequencyShear WaveDual ElementAngle BeamImmersionPinducersDelay Line
Transducer TypesGeneral Purpose – GPGeneral purpose transducers are mediumdamped transducers combining optimumsensitivity without sacrificing near surfaceresolution.Typical bandwith is 30% to 50% @ -6dBHigh Resolution – HRHigh resolution transducers are highlydamped, broadband transducers usuallychosen for improved near surface resolution, and improved signal to noise.Typical bandwith is 70% to 100% @ -6dBHigh Power – HPHigh power transducers are lightly dampedor air-backed narrowband transducers designed for maximum power & penetration.They can be configured for use with toneburst or CW pulsers.Typical bandwith is 10% to 40% @ -6dB508-435-6831 800-982-5737 www.ctscorp.com utsales@ctscorp.com
Contact TransducersContact Transducers are the most common and frequently used to introducelongitudinal waves into a material. Also, by using special elements, normalincidence shear wave or a combination of longitudinal/shear wave transducerscan be made. These types of transducers are used in direct contact with thetest material and therefore require a highly durable wearplate.Contact Transducers are single element transducers designed for generalpurpose contact inspection of metal, ceramic, and composite materials. Thesetransducers offer rugged construction and maximum resistance against fractureand rough surfaces.Advantages: Thick walled, case-hardened chrome-plated cases for standard contactsCompatible with all commercial flaw detectorsDelrin sleeves for fingertip styles reduces case noiseAvailable in high sensitivity, high resolution and general purposeStandard Contact TransducersThe Standard Contact Transducer case styles offer thicker walled, case forextended life wear. They are offered in side or top BNC mounted connectors.DIAMETERINCHES 1.00(25.4)1.125(28.575)1.2531.75)TYPE GP: GENERAL PURPOSE1.20"(30.48)0 .71")(18.0340.50CS0.504GP CS0.506GP PCS0310GP5.00CS0504GPCS0506GPCS0508GP––TYPE HR: HIGH RESOLUTION0.50CS0.504HR CS0.506HR RCS0310HR5.00CS0504HRCS0506HRCS0508HR––TYPE HP: HIGH POWER508-435-6831 PCS0508HP––800-982-5737 www.ctscorp.com utsales@ctscorp.com
Contact TransducersFingertip Contact TransducersFingertip Contact Transducers are small diameter contact transducers ideally suitedfor limited access surface inspections or when higher frequencies are needed. TheseFingertip Contact Transducers are offered with right angle microdot connectors.FREQUENCY(MHz)DIAMETERINCHES (25.4)TYPE GP: GENERAL ��0.60"(15.24)TYPE HR: HIGH 04GP––10.00CF1002GPCF1003GPCF1004GP––TYPE HP: HIGH 35-6831 800-982-5737 www.ctscorp.com utsales@ctscorp.com
Contact TransducersProtective Face TransducersIntegral replaceable Protective Face Transducers, which combines three differenttypes of wear surfaces: a soft protective membrane, a high temperature delay line (upto 550 F), and an expendable protective wear cap for extremely rough surfaces. AllProtective Face Transducers are general purpose (GP).SIZEINCHES .0CP0504CP0506CP0508–OptionsSIZEINCHES (25.4)1.125(28.575)Membranes (Doz)VPM12-04VPM12-06VPM12-08VPM12-10High Temp DelayVHT-04VHT-06VHT-08VHT-10Wear Cap (Doz)VWC-04VWC-06VWC-08VWC-10Delay RingVRC-04VRC-06VRC-08VRC-10 800-982-5737 www.ctscorp.com utsales@ctscorp.com
Delay Line TransducersCTS offers a complete line of High Resolution and highly dampedDelay Line Transducers, both with Removable and Permanent Delays.These Delay Line Transducers are recommended for inspection andthickness gauging of thin materials, and near surface flaw detection.Removable Delay Line TransducersHigh resolution (HR) Removable Delay Line Transducers are designed for near surface resolution. Theversatility of the transducers provides an economical approach and allows a quick change when thedelay tip gets worn. Each part is equipped with a screw-on retaining ring and a room temperature lowattenuation delay line material. Other high temperature delay line materials can also be substituted.DIAMETER INCHES 5)0.5(12.7)2.25–DR 022DR 023DR 0243.50–DR 032DR 033DR 0345.00–DR 052DR 053DR 0547.50–DR 072DR 073DR 07410.00DR 101DR 102DR 103–DIAMETERINCHES (mm)ABC15.00DR 151DR 152––0.125 (3.175)1.01 (25.654)0.39 (9.906)0.19 (4.826)20.00DR 201DR 202––0.25 (6.35)1.08 (27.432)0.56 (14.224)0.31 (7.874)25.00DR 251DR 252––0.50 (12.7)1.36 (34.544)0.80 (20.32)0.55 (13.97)Permanent Delay Line TransducersHigh resolution (HR) Permanent Delay Line Transducers designed for near surface resolution with 0.35inches (8.89 mm) fixed delays built into the housing, which eliminate the need for adding couplant andchanging delays. This permanent bond between crystal and delay provides improved performanceover Removable Delay Line Transducers. High temperature delay line materials are also available.FREQUENCY(MHz)DIAMETER INCHES 5–DP 022DP 023DP 0243.50–DP 032DP 033DP 0345.00–DP 052DP 053DP 0547.50–DP 072DP 073DP 07410.00DP 101DP 102DP 103–15.00DP 151DP 152––20.00DP 201DP 202––25.00DP 251DP 252––508-435-6831 800-982-5737 DIAMETERINCHES (MM)AB0.25 (6.35)0.80 (20.32)0.43 (10.922)0.375 (9.525)0.80 (20.32)0.55 (13.97)0.50 (12.7)0.80 (20.32)0.70 (17.78)www.ctscorp.com utsales@ctscorp.com
Angle Beam TransducersCTS’ Angle Beam Transducers and various wedge combinations are typically used tolaunch refracted shear waves or surface waves in a test material. CTS designedall of its Angle Beam Transducers with high gain and optimum resolution (GPSeries). Special broadband, high resolution transducers (HR Series) can be substituted upon request. All replaceable wedges are offered in standard rexolite orpolystyrene depending upon frequency. In addition, special high temperaturewedges are available up to 500 F. As an option, CTS can contour Angle Beamwedges for axial or circumferential pipe or bar inspection.Angle Beam Transducers utilize the basic principle of refraction and modeconversion to produce refracted shear or longitudinal waves in the test material.The angle of incidence required to produce the desired refracted wave is calculatedfrom Snell’s Law. The following formula may be used to calculate the wedge angle (Q1)required to generate the desired mode and refracted angle (Q2) in the material under test.SinØ1V1 SinØ2V2Ø1 Wedge angleØ2 Angle of refracted wave in test materialV1 Longitudinal velocity of wedge materialV2 Velocity of material being inspected forthe desired modeAWS TransducersAWS Transducers conform to AWS Code D1.1. The AWS wedges are offered ineither Serrated or Snail configurations and provide optimum signal to noise ratios.FREQUENCY(MHz)2.25SIZEINCHES (mm)0.625 X 0.625(15.875 X 15.875)0.625 X 0.75(15.875 X 19.05)0.75 X 0.75(19.05 X 19.05)AW0255AW0256AW0266AWS Serrated WedgesAWS Snail WedgesPART NUMBERREFRACTED ANGLEPART NUMBERREFRACTED ºSAWS7070º508-435-6831 800-982-5737 www.ctscorp.com utsales@ctscorp.com
Angle Beam TransducersStandard Angle Beam TransducersStandard Angle Beam Transducers conform to all commercialflaw detectors available. These transducers produce refractedshear waves when coupled to replaceable wedges. StandardAngle Beam Transducers are constructed with anodizedaluminum housings for durability.FREQUENCY(MHz)SIZEINCHES (mm)0.5 X 0.5(12.7 X 12.7)0.5 X 1.0(12.7 X 25.4)1.0 X 1.0(25.4 X 44AB0348AB0308–5.00AB0544AB0548AB0508–Standard Angle Beam WedgesNOMINAL SIZEINCHES 52)1.65(41.91)0.50 x 1.00(12.7 x .02(25.908)REFRACTEDANGLECTS offers standard replaceable wedges in three differentstyles: Serrated Type, Snail Type, and High TemperatureType for temperatures up to 500 5)0.71(18.034)0.69(17.526)0.68(17.272)SIZE: 1.00 (25.4)30 45 60 70 90 —SIZE: 0.50 x 1.00 (12.7 x 25.4)30 45 SIZE INCHES (mm)REFRACTEDANGLE0.5 X 0.5(12.7 X 12.7)0.5 X 1.0(12.7 X 25.4)1.0 X 1.0(25.4 X 25.4)30 WS443WS483WS88345 WS444WS484WS88460 70 90 WS446WS486WS88670 WS447WS487WS88745 60 70 90 WS779508-435-6831WS489 WS889800-982-5737 —SIZE: 0.50 (12.7)30 60 8)90 0(30.48)1.20(30.48) utsales@ctscorp.com —
Angle Beam TransducersPotted Angle Beam TransducersREFRACTEDANGLEMiniature and Micro-miniature PottedAngle Beam Transducers are designedfor angle beam inspection in limitedaccess areas. Both series have durableplastic housings to insure againstscratching of critical materials. Alltransducers are supplied with either side-mounted or topmounted microdot connectors. Micro-miniature PottedAngle Beam Transducers are designed for small approachdistances and for limited access testing.0.187 (4.75)0.25 (6.35)0.375 (9.52)0.50 (12.7)FREQUENCY: 2.25MHz45 AP0214AP0224AP0234AP024460 AP0216AP0226AP0236AP024670 AP0217AP0227AP0237AP024790 AP0219AP0229AP0239AP0249FREQUENCY: 5.0MHzSIZEINCHES (mm)ABC0.25 x 0.25(6.35 x 6.35)0.34(8.636)0.75(19.05)0.55(13.97)0.375 x 0.375(9.525 x 9.525)0.480.940.80(12.192) (23.876) (20.32)0.50 x 0.50(12.70 x 12.70)0.60(15.24)1.25(31.75)SIZE INCHES (mm)0.90(22.86)45 AP0514AP0524AP0534AP054460 AP0516AP0526AP0536AP054670 AP0517AP0527AP0537AP054790 AP0519AP0529AP0539AP0549FREQUENCY: 10.0MHz45 AP1014AP1024AP1034AP104460 AP1016AP1026AP1036AP104670 AP1017AP1027AP1037AP104790 AP1019AP1029AP1039AP1049Threaded Angle Beam TransducersThreaded Angle Beam Transducers are miniaturescrew-in type transducers and wedges that aredesigned to allow a quick-change option.DIAMETER INCHES (mm)FREQUENCY(MHz)0.25 (6.35)0.375 (9.525)0.5 (12.7)1.0AT012AT013AT014DIAMETERINCHES (mm)ABTHREAD SIZEINCHES (mm)2.25AT022AT023AT0240.25 x 0.25(6.35 x 6.35)0.48(12.192)0.55(13.97)0.375 -32 UNEF(9.525)3.5AT032AT033AT0340.580.590.375 x 0.375(9.525 x 9.525) (14.732) (14.986)0.50 -28 00AT102AT103AT1040.50 x 0.50(12.70 x 12.70)0.70(17.78)0.625 0.625 -24 UNEF(15.875)(15.875)Threaded Angle BeamWedgesSIZE INCHES (mm)0.25 (6.35)0.375 (9.525)0.5 WT47WT29WT39WT49The wedges are designed with a specialsound absorbent material for minimuminternal reflection. In addition, carefulconsideration has been given to minimizethe index to crown distance.508-435-6831 800-982-5737 www.ctscorp.com utsales@ctscorp.com
Dual Element TransducersDual Element Transducers contain two separate elements within a single housing.These elements, mounted on delays, are acoustically isolated and are slightlyangled towards each other to create a pseudo focusing effect in a test material.This tandem arrangement provides superior near surface resolution and improvedperformance on corroded back walls.Dual Element Transducers use separate elements to transmit and receive ultrasound signals. The elements are typically cut at an angle and mounted on delaylines. This helps to improve near surface resolution and the cross-beam designalso helps to create a focus which makes Dual Element Transducers more sensitiveto echoes from irregular defects caused from corrosion and pitting.Potted Cable TransducersPotted Cable Transducers are provided with right angle six foot pottedcables terminated in BNC connectors. These transducers are providedwith stainless steel knurled cases for improved grip and will operate attemperatures up to 800 F with momentary contact.DIAMETER INCHES (mm)FREQUENCY(MHz)0.25 (6.35)0.375 (9.525)0.5 (12.7)0.75 (19.05)1.0––DC 014DC 0162.25DC 022DC 023DC 024DC 0263.5DC 032DC 033DC 034DC 0365.0DC 052DC 053DC 054DC 05610.00DC 102DC 103DC 104–DIAMETERINCHES (15.24)0.75(19.05)0.99(25.146)0.60(15.24)Removable Cable TransducersRemovable Cable Transducers are provided with dual microdotconnectors, allowing for quick field changes of detective cables. Six-footdual microdot to BNC cables are recommended as an accessory. Thesetransducers come with knurled stainless steel cases and will operate attemperatures up to 800 F with momentary contact.FREQUENCY(MHz)DIAMETER INCHES (mm)DIAMETERINCHES .526) 17.526) 0.80(20.32)0.75(19.05)0.75(19.05)0.25(6.35)0.25 (6.35)0.375 (9.525)0.5 (12.7)0.75 (19.05)1.0––DF 014DF 0162.25DF 022DF 023DF 024DF 0263.5DF 032DF 033DF 034DF 0365.0DF 052DF 053DF 054DF 0560.50(12.7)10.00DF 102DF 103DF 104–0.75(19.05)508-435-6831 800-982-5737 www.ctscorp.com utsales@ctscorp.comCD
Immersion TransducersCTS’ Immersion Transducers are specifically designed to operate in an immersion tankor with bubbler and/or squirter systems. They are manufactured with UHF waterproofconnectors and can be designed with flat or focused lenses. All Immersion Transducersare offered in High Resolution (HR), General Purpose (GP), or High Performance (HP).Advantages: Immersion Transducers speed up test results with high speed scanning oflarge surfaces. Spherical focusing available for minimizing beam width for improvingsensitivity to smaller defects. E poxy quarter wavelength matching layer maximizes sensitivity and resolution. Cylindrical focusing available for tube or bar inspection.Immersion Transducers are available in the following case styles: Standard, LargeDiameter, Pencil, and Paintbrush.FREQUENCY(MHz)DIAMETER INCHES (mm)0.25 (6.35)0.375 (9.525)0.5 (12.7)TYPE GP: GENERAL PURPOSEStandard ImmersionTransducersStandard Immersion Case Style Transducers(IS) are ideally suited for most immersiontesting applications utilizing any elementdiameter up to 0.50 inches (12.7 mm). IS areoffered in frequencies from 500kHz to 25MHz.All transducers feature acoustically matchedlenses and corrosion resistant stainless steelhousings for optimum performance andrugged use. Three configuration types areavailable: flat, spherical, and 2GP––25.00IS2502GP––TYPE HR: HIGH R––25.00IS2502HR––TYPE HP: HIGH POWER508-435-6831 800-982-5737 .ctscorp.com utsales@ctscorp.com
Immersion TransducersLarge Diameter Case StyleLarge Diameter Case Transducers (IL) combine large element diameters and a broadrange of frequencies for higher gain and extended near-field applications. In addition,the larger diameter transducers can provide larger indexing for automated scanningapplications.FREQUENCY(MHz)DIAMETERINCHES .5(38.1)TYPE GP: GENERAL PURPOSE0.50IL0.506GP IL0.508GP IL0.509GP IL0.510GP L1006GP––––DIMENSIONSINCHES .00(25.4)1.121.37(28.448) .258) (34.798) 148) (34.798)1.5(38.1)1.751.151.87(44.45) (29.21) (47.498)CDTYPE HR: HIGH RESOLUTION0.50IL0.506HR IL0.508HR IL0.509HR IL0.510HR L1006HR––––TYPE HP: HIGH POWER0.50IL0.506HP IL0.508HP IL0.509HP IL0.510HP L1006HP––––508-435-6831 800-982-5737 www.ctscorp.com utsales@ctscorp.com1.5(38.1)
Immersion TransducersPencil Case Style Immersion TransducersPencil Case Style Immersion Transducers combine small case diameters andextended working length facilitating access where hard to reach areas areencountered. These Pencil Case Styles are offered in P style (UHF connector)and an PM style (microdot connector) with element diameters of 0.125” and 0.250”.Both spherical and cylindrical focal lengths are available as options.0.74"(18.796)2.12"(53.848)DIAMETERINCHES (mm)FREQUENCY(MHz)0.38"(9.652)0.125 (3.175)1.63"(41.402)0.25 (6.35)TYPE GP: GENERAL PURPOSEP StylePM StyleP StylePM E HR: HIGH RESOLUTION508-435-6831 5737 www.ctscorp.com utsales@ctscorp.com
Immersion TransducersPaintbrush StylePaintbrush Style Immersion Transducers (PB) are designed to maximize the scan indexof ultrasonic immersion testing thus reducing the scan time for large plates such assteel or aluminum. The unique design provides uniform sensitivity across the length towithin 1.5dB. The standard flat PB are up to 3.0 inches or 76.2 milimeters in length.Cylindrically focused PB combine small case diameters and extended working lengthfacilitating access where hard to reach areas are encountered.Advantages: Large scan indexes to reduce scan time for plate inspection. Transverse axis flat within 1.5dB. Length up to 3.0 inches or 76.2 millimeters. Cylindrical focusing available.FREQUENCY(MHz)SIZEINCHES (mm)1.5 X 0.25(38.1 X 6.35)2.0 X 0.25(50.4 X 6.35)3.0 X 0.25(76.2 X 51PB052PB0537.50PB071PB07210.00PB101PB102SIZE INCHES(mm)ABC3.00 x 0.25(76.2 x 6.35)0.82(20.828)0.75(15.24)3.0(76.20)PB0732.0 x 0.25(50.4 x 6.35)0.82(20.828)0.75(15.24)2.5(63.50)PB1031.5 x 0.25(38.1 x 6.35)0.82(20.828)0.75(15.24)2.0(50.40)SIZEINCHES (mm)DIMENSIONSINCHES (mm)3.0 (76.2)3.0 (76.2)2.0 (50.8)2.5 (63.5)1.5 (38.1)2.0 (50.8)508-435-6831 800-982-5737 www.ctscorp.com utsales@ctscorp.com
High Frequency TransducersHigh Frequency Transducers offer frequency ranges from 30MHz to 150MHz.Applications include acoustic microscopy, flaw detection, and characterization ofsolder bumps in flip-chips in the microelectronics industry, high resolution thicknessof meals down to 0.001" (0.0254mm), and high resolution surface wave imaging.Advantages: Broadband, highly damped signals for flaw detection of defects as small as0.001" (0.0254mm) Extremely short wavelengths for thickness gauging Available in both Contact and Immersion Delay Styles Immersion Transducers available with optically ground lensesHigh Frequency Standard Immersion Case StyleHigh Frequency Standard Immersion Case Style Transducers are available in frequencies from 20MHz to 100MHz.These transducers are all provided with axial UHF connectors for support and either a side-mount or axial-mountmicrodot for the electrical connector. In addition, they come with an internal fuse silica delay line and are availableflat or focused. Epoxy lenses are used for frequencies up to 30MHz. Custom transducers are available above30MHz and are offered with optically ground lenses.PARTNUMBERFREQUENCY(MHz)SIZE INCHES(mm)DELAY (µS)FOCAL LENGTHINCHES (mm)VF 40120.00.25 (6.35)4.25flatVF 40220.00.25 (6.35)2.50.75 (19.05)VF 40320.00.25 (6.35)4.251.25 (31.75)VF 40420.00.25 (6.35)4.252.0 (50.8)VF 40530.00.25 (6.35)4.25flatVF 40630.00.25 (6.35)2.50.75 (19.05)VF 40730.00.25 (6.35)4.251.25 (31.75)VF 40830.00.25 (6.35)4.252.0 (50.8)VF 40950.00.25 (6.35)4.25flatVF 41050.00.25 (6.35)2.50.75 (19.05)VF 41150.00.25 (6.35)4.251.25 (31.75)VF 41250.00.25 (6.35)2.50.5 (12.7)VF 41375.00.25 (6.35)2.50.5 (12.7)VF 414100.00.25 (6.35)2.50.5 (12.7)508-435-6831 800-982-5737 www.ctscorp.comDIMENSIONSINCHES (mm) tsales@ctscorp.com
High Frequency TransducersHigh Frequency Large Immersion Case StyleHigh Frequency Large Immersion Case Style Transducers integrate an optical grade fusedsilica delay line of approximately 20 microseconds optically ground lenses for precisionfocusing. Custom buffer rods are also available in sapphire and single crystal silicon. Inaddition, custom ground lenses are available in aspheric and cylindrical configurations.PARTNUMBERFREQUENCY(MHz)SIZE INCHES(mm)DELAY(µS)FOCAL LENGTHINCHES (mm)VF 60150.00.125 (3.175)200.5 (12.7)VF 60250.00.25 (6.35)200.5 (12.7)VF 60350.00.25 (6.35)200.75 (19.05)VF 60450.00.25 (6.35)201.0 (25.4)VF 60550.00.25 (6.35)100.2 (5.08)VF 60675.00.25 (6.35)200.5 (12.7)VF 60775.00.25 (6.35)200.75 (19.05)VF 60890.00.25 (6.35)200.5 (12.7)VF 609100.00.25 (6.35)200.5 (12.7)VF 610100.00.25 (6.35)201.0 (25.4)VF 611100.00.25 (6.35)100.2 (5.08)VF 612125.00.125 (3.175)200.5 (12.7)VF 613125.00.125 (3.175)200.75 (19.05)VF 614150.00.125 (3.175)200.5 (12.7)High Frequency Permanent Delay Line ContactHigh Frequency Permanent Delay Line Contact Transducers are designed for extremely thinmaterial thickness gauging and near surface flaw detection. All transducers are broadband,high resolution series with internal fused silica buffers and right-angle microdot connectors.PART NUMBERFREQUENCY (MHz)SIZE INCHES (mm)DELAY (µS)STYLEVF 202-FL20.00.25 (6.35)4.25FLVF 202-SL20.00.25 (6.35)4.25SLVF 202-FS20.00.25 (6.35)2.5FSVF 302-FL30.00.25 (6.35)4.25FLVF 302-SL30.00.25 (6.35)4.25SLVF 302-FS30.00.25 (6.35)2.5FSVF 502-FL50.00.25 (6.35)4.25FLVF 502-SL50.00.25 (6.35)4.25SLVF 502-FS50.00.25 (6.35)2.5FSVF 501-FL50.00.125 (3.175)4.25FLVF 501-SL50.00.125 (3.175)4.25SLVF 501-FS50.00.125 (3.175)2.5FSVF 751-FL75.00.125 (3.175)4.25FLVF 751-FS75.00.125 (3.175)2.5FSVF 1001-FL100.00.125 (3.175)4.25FLVF 1001-FS100.00.125 (3.175)2.5FSVF 1251-FS125.00.125 (3.175)2.5FSVF 1501-FS150.00.125 (3.175)2.5FS508-435-6831 800-982-5737 www.ctscorp.com 20.32)
Shear Wave TransducersShear Wave Transducers are designed to excite shear waves directly into amaterial without the use of angle beam wedges. Unique design parametershave been incorporated to minimize the longitudinal component. Applicationsinclude direct shear wave velocity, Young’s modulus of elasticity and shearmeasurements. The shear direction on all transducers is parallel to the rightangle connector unless otherwise specified. Special longitudinal/shearcombinations are available in a single 4"(31.496)Standard Shear WaveTransducersFingertip Shear WaveTransducersStandard Shear Wave Transducers are designedwith frequency ranging from 50kHz to 5MHz.Fingertip Shear Wave Transducers are small sized stylecases with frequency ranging from 1.0MHz to 5.0MHz.PART NUMBERFREQUENCY (MHz)SIZE INCHES (mm)PART NUMBERFREQUENCY (MHz)SIZE INCHES (mm)SS 0.0580.051.0 (25.4)SF 0141.00.5 (12.7)SS 0.180.11.0 (25.4)SF 0242.250.5 (12.7)SS 0.280.251.0 (25.4)SF 0515.00.125 (3.175)SS 0.580.51.0 (25.4)SS 0181.01.0 (25.4)SF 0525.00.25 (6.35)SS 0545.00.5 (12.7)SF 0545.00.5 (12.7)Delay Line Shear Wave TransducersDelay Line Shear Wave Transducers are direct normal incidence shearwaves without angled wedges. Internal fused silica buffers are availablefor frequencies ranging from 10.0MHz to 30.0MHz.PART NUMBERFREQUENCY (MHz)SIZE INCHES (mm)DELAY (µS)STYLESD 052-SL5.00.25 (6.35)7SLSD 102-SL10.00.25 (6.35)7SLSD 152-SL15.00.25 (6.35)7SLSD 202-SL20.00.25 (6.35)7SLSD 202-FL20.00.25 (6.35)7FLSD 202-FS20.00.25 (6.35)4FSSD 252-FS25.00.25 (6.35)4FS508-435-6831 800-982-5737 www.ctscorp.com 11.176)0.63(16.002)utsales@ctscorp.com
Pinducers CTS is the first in its industry to introduce the VP-1093 Pinducer andthe VP-1063 MiniPin. These miniature transducers are designed forshock wave applications.Advantages: Direct normal incidence shear waves without angled wedges Available in a wide range of frequencies C an be utilized with wedges to launch both horizontally orvertically polarized shear wavesStandard PinducersPerformance PinducersMiniature transducers designed for shock waveapplications.High Performance Pinducers and MiniPins are offeredwith elements of 0.053 inch and 0.040 inch diameters,respectively, and are designed with quarter-wave matchinglayers and dense backings for optimum resolution andsensitivity. They are offered in high resolution (HR) andgeneral purpose (GP) with frequencies from 5.0MHz to20MHz.Advantages: Economic pricing structure for standard Pinducers Bandwidths of 75% at -6dB are achievable Selection of piezoceramic elements available Standard pin type or potted coaxial cable availableSTANDARDFREQUENCY(MHz)CRYSTAL DIAMETERINCHES (mm)PERFORMANCEFREQUENCY(MHz)CRYSTAL DIAMETERINCHES (mm)VP-10930.001-10.00.059 (1.5)VP-0.50.001-10.00.019 (0.5)VP-10630.001-10.00.039 (1.0)VP-10.001-10.00.039 (1.0)VP-1.50.001-10.00.059 (1.5)VP-30.001-10.00.11 (3.0)VP-1063VP-1093VP-0.5VP-1VP-3508-435-6831 800-982-5737 www.ctscorp.com utsales@ctscorp.com
AccessoriesCable & ConnectorsSearch TubesA complete selection of ultrasonic transducer cables and connectors for connection to a variety of ultrasonic flaw detectorsand thickness gauges. Custom lengths are also available.CTS’s Stainless Steel Immersion Search Tubesare 0.75” (19.05mm) in diameter and areused for all Immersion Transducers with UHFconnectors.PARTNUMBERLENGTHFEET (M)CABLETYPEDESCRIPTIONVFC-016.0 (1.828)RG 174BNC/BNCVFC-026.0 (1.828)RG 58BNC/BNCVFC-0312.0 (3.657)RG 58BNC/BNCVFC-046.0 (1.828)RG 174BNC/MicrodotVFC-056.0 (1.828)RG 58BNC/UHFVFC-066.0 (1.828)RG 174BNC/Water Proof UHFVFC-076.0 (1.828)Belden8218VFC-086.0 (1.828)VFC-09Angle reflectors are also available to direct thesound beam 90º into hard to reach areas. Weoffer these reflectors for Standard, Pencil, andPaintbrush Immersion Transducers.PART NUMBERSIZEINCHES (mm)LENGTHINCHES (mm)US-20.74 (18.796)2.0 (50.8)US-40.74 (18.796)4.0 (101.6)BNC/Water Proof UHFUS-60.74 (18.796)6.0 (152.4)RG 58BNC/Lemo 1US-120.74 (18.796)12.0 (304.8)6.0 (1.828)RG 174BNC/Lemo 00US-180.74 (18.796)18.0 (457.2)VFC-106.0 (1.828)RG 58Lemo 1/Lemo 1US-240.74 (18.796)24.0 (609.6)VFC-116.0 (1.828)RG 174Lemo 1/MicrodotVFC-126.0 (1.828)RG 58Lemo 1/UHFVFC-136.0 (1.828)Belden8218Lemo 1/Water Proof UHFVFC-146.0 (1.828)RG 174Lemo 1/Lemo 00VFC-156.0 (1.828)RG 58UHF/UHFVFC-1612.0 (3.657)RG 58UHF/UHFVFC-176.0 (1.828)RG 174UHF/MicrodotVFC-186.0 (1.828)Belden8218UHF/Water Proof UHFAdaptersA complete selection of ultrasonic transduceradapters for connection to a variety of ultrasonic flaw detectors and thickness gauges.PART NUMBERSIZEVFC-196.0 (1.828)RG 174UHF/Lemo 00VFA-01BNC Male/UHF FemaleVFC-206.0 (1.828)RG 174Dual BNC/MicrodotVFA-02UHF Male/BNC FemaleVFC-216.0 (1.828)RG 174Dual Lemo 1/MicrodotVFA-03Lemo 1 Male/BNC FemaleVFC-226.0 (1.828)RG 174Dual UHF/MicrodotVFA-04Lemo 1 Female/BNC FemaleVFC-236.0 (1.828)RG 174Dual Lemo 00/MicrodotVFA-05B
transducers offer rugged construction and maximum resistance against fracture and rough surfaces. Advantages: Thick walled, case-hardened chrome-plated cases for standard contacts
