Transcription
Push/pulllatches
Quality hardware for superior door controlKnown throughout the industry as the “overhead door holder specialist,” Glynn-Johnson has made its namewith state-of-the-art manufacturing and technology. The portfolio also includes a full line of push/pull latchesthat are ideal for healthcare applications. Delivering both superior quality and exceptional performance,Glynn-Johnson products are offered in a wide variety of popular finishes and configurations providing theflexibility needed to meet the most demanding door control applications.To learn more visit www.allegion.com/us or call us at 877-671-7011.2 Glynn-Johnson Push/pull latches
IndexStandard function - HL64-5Privacy function - PL7 or PL86-7Mortise lock function - HL68-10Engraving guide11FinishesFinish no.DescriptionUS3Polished brassUS4Satin brassUS10Satin bronzeUS10BOil rubbed bronzeUS26Polished chromeUS26DSatin chromeUS32DSatin stainless steelGlynn-Johnson Push/pull latches 3
Push/pull latchGlynn-Johnson HL6Application informationGlynn-Johnson offers a complete line of door hardware,The sleek design has a short throw angle, allowing theproviding solutions for the most complex door controldoor to be opened with an easy push or pull action, evenproblems. The HL6 push/pull latch offers versatility andwhen hands are not free.durability for commercial and institutional settings. TheseFor applications with the handles pointing towards themodels are designed for commercial and institutionaldoors up to 1 3 4", including single fire doors. For doors over1 3 4" please specify door thickness.Six mounting positions:§§ Increases versatility§§ Suits a wide range of applications§§ Mounts in any of six positionslatch edge of the door, the 7" backset must be used. Allother handle orientations may use any backset.OptionsSuffix B (brass base-material)The option of using brass handles and covers instead ofthe standard zinc for the US26D finish. Handles down Handles upSuffix E (engraved handles) One handle up, one handle down (either push or pull)Adds engraving to the handles “push” and “pull”. See Handles point away from latchpage 11 for engraving guide. Engraved handles are not Handles point toward latchrecommended for humid applications.Four backset sizes:§§ 2 3 4"Suffix EN (entrance only)The entrance only latch is appropriate for doors where§§ 3 3 4"only one side is used for entry, pull handle only. Order§§ 5"HL6EN for applications where no exit is required.§§ 7"Suffix EO (exit only)Two strike sizes:The exit only latch is appropriate for doors where only§§ Standard – 2 4"one side is used for exit, push handle only is required.§§ ASA – 4 8"Order HL6EO for applications where the security of37Seven options:no entry.§§ B—brass base material for US26D finishSuffix L (lead lining)§§ E—Engraved handles – “push” and “pull”The lead lining kit provides lead components to cover§§ EN—Entrance only latchcut-outs made in lead lined doors.§§ EO—Exit only latchSuffix RL (roller latch conversion)§§ L—Lead linedThe push/pull roller latch conversion kit is used to§§ RL—Roller latch conversion kitconvert existing Glynn-Johnson 30 roller latches to§§ SOC—Pin-in-socket security screwsmeet current federal standard requirements. Minimalalterations are required, to the door edge. Kit includesFinishes:the faceplate adapter making the latchbolt faceplate§§ US3, US4, US10, US10B, US26, US26D, US32D1 1 8" x 3 3 8". The kit also includes a full lip strike which Optional: RAL powder coat finishes available.Consult factoryUnmatched convenience:§§ Non-handed§§ Variable mounting positions§§ No fusible link to fail§§ UL listed for all single labeled metal or wood doors4 Glynn-Johnson Push/pull latchesis 2 1 4" tall.Suffix SOC (pin-in-socket security screws)The option of having pin-in-socket security screwsinstead of standard screws. Pin-in-socket screws areprovided for the strike, latch bolt and covers.
2 9 16"1 1 2"12 5 8"max 2"122-1/8 8"5 1 2"333-3/8 8"How to orderHL6Options:BEENEOLRLSOCBrass base material on US26D(1, 2, 3, 4, 5, or 6) - engraved handlesEntrance onlyExit onlyLead linedRoller latch conversion kitPin-in-socket security screwsUS3US4US10US10BUS26US26DUS32DPolished brassSatin brassSatin bronzeOil rubbed bronzePolished chromeSatin chromeSatin stainless steel23572 3 4"3 3 4"5"7"BlankAStandard strikeASA strikeFinishes:Backset:Strike:Door thickness:Blank1 3 4" door, specify other thicknessGlynn-Johnson Push/pull latches 5
Privacy fuction push/pull latchGlynn-Johnson PL7 / PL8Application informationGlynn Johnson offers a wide range of door hardware toThe patented design is ideal for restrooms or patientprovide solutions for the most complex door controlbathrooms. It combines all the features and functionsproblems. The PL7 and PL8 privacy function push/pullof the popular HL6 push/pull latch, with the addedlatches provide the versatility and durability needed forconvenience of privacy actuated by a thumbturn.commercial and institutional doors up to 1 4", includingThe sleek design has a short throw angle, allowing the3single fire doors.door to be opened with an easy push or pull action,Two models:even when hands are not free. The release on opposite§§ PL7 for push-side thumbturnside provides for access in case of emergency.§§ PL8 for pull-side thumbturnFor applications with the handles pointing towardsThree mounting positions:the latch edge of the door, the 7" backset must beused.Both handles must point in the same direction.§§ Increased versatilityWhen both handles point up or down, any backset§§ Mount in any of three positionsmay be used. Handles down Handles up Handles point towards latchFour sizes of backsets:§§ 2 3 4"§§ 3 4"OptionsSuffix B (brass base-material)The option of using brass handles and covers instead ofthe standard zinc for the US26D finish.3§§ 5"Suffix E (engraved handles)Adds engraving to the handles “push” and “pull”. See§§ 7"page 11 for engraving guide. Engraved handles are notTwo strike sizes:recommended for humid applications.§§ Standard–2 3 4"§§ ASA–4 7 8"Five options:§§ B—Brass base material for US26D finish§§ E—Engraved handles – “push” and “pull”§§ L—Lead linedSuffix L (lead lining)The lead lining kit provides lead components to covercut-outs made in lead lined doors.Suffix RL (roller latch conversion)The Push/pull roller latch conversion kit is used toconvert existing Glynn-Johnson 30 roller latches to§§ RL—Roller latch conversion kitmeet current federal standard requirements. Minimal§§ SOC—Pin-in-socket security screwsalterations are required, to the door edge. Kit includesFinishes:§§ US3, US4, US10, US10B, US26, US26D, US32Dthe faceplate adapter making the latchbolt faceplate1 1 8" x 3 3 8". The kit also includes a full lip strike whichis 2 1 4" tall. Optional: RAL powder coat finishes available.Consult factoryUnmatched convenience:§§ Non-handed§§ Variable mounting positions§§ No fusible link to fail§§ UL listed for all single labeled metal or wood doors6 Glynn-Johnson Push/pull latchesSuffix SOC (pin-in-socket security screws)The option of having pin-in-socket security screwsinstead of standard screws. Pin-in-socket screws areprovided for the strike, latch bolt and covers.
2 9 16"522-5/8 8"32-3/162 16"122-1/8 8"1 2"55-1/233-3/8 8"34 1 2"1 1 2"How to orderPLModel:7 Push-side thumbturn8 Pull-side thumbturnOptions:BELRLSOCBrass base material on US26D(2, 3, 4, or 6) - engraved handlesLead linedRoller latch conversion kitPin-in-socket security MPolished brassSatin brassSatin bronzeOil rubbed bronzePolished chromeSatin chromeSatin chrome - antimicrobialSatin stainless steelSatin stainless steel - antimicrobialFinishes:Backset:23572 3 4"3 3 4"5"7"BlankABTStandard strikeASA strikeBent tab strikeStrike:Door thickness:Blank1 3 4" door, specify other thicknessGlynn-Johnson Push/pull latches 7
Combination push/pull latch and mortise lockMortise lock optionUnmatched convenience:The HL6 push/pull latch is available with a Schlage §§ Non-handedL Series heavy-duty mortise lock included. Mortise lock§§ Variable mounting positionscombination models are furnished in 2 4" backset.§§ UL listed for all labeled metal or wood doors3Five mounting positions:§§ Increased versatilityApplication information§§ Mount in five positionsThe unit combines the features and convenience of the–Handles downHL6 push/pull operation with the durability of the–Handles upheavy-duty mortise lock. The sleek design has a short–One handle up, one handle down (either push or pull)throw angle, allowing the door to be opened with an–Handles point away from latcheasy push or pull action, even when hands are not free.§§ Suits a wide range of applicationsCylinder operation:The mortise lock offers many lock functions, see page10 and 11 for the specific functions available. The onlyhandle orientation not available would be handlesWhere cylinders are required, Glynn-Johnson will supplypointing towards the latch edge of the door.locks less cylinders. An 1 8" cylinder with a cloverleaf cam1is required. Handle on cylinder side must be mounted indown position, if vertical mounting is used.Thumbturn operation:Where thumbturn operations are required, the handle mustbe mounted in horizontal position. Standard thumbturn isOptionsSuffix B (brass base-material)The option of using brass handles and covers instead ofthe standard zinc for the US26D finish.provided.Suffix E (engraved handles)Mortise lock retrofit kit:Adds engraving to the handles “push” and “pull”. SeeKits are available to retrofit existing installations and theypage 11 for engraving guide. Engraved handles are notinclude all necessary components. 9000RK is specified forthe lock function. If Schlage mortise locks are alreadyinstalled, the set can be easily converted to push/pulloperation with minor modifications to door.*Mortise lock functions availableFor a list of standard lock functions available see page 10.recommended for humid applications.Suffix EN (entrance only)This entrance only latch is appropriate for doors whereonly one side is used for entry, pull handle only. OrderHL6EN for applications where no exit is required.For other lock functions, consult factory.Suffix EO (exit only)Six options:This exit only latch is appropriate for doors where only§§ B—Brass base material for US26D finish§§ E—Engraved handles – “push” and “pull”§§ EN—Entrance only latch§§ EO—Exit only latch§§ L—Lead lined§§ SOC—Pin-in-socket security screwsFinishes:§§ US3, US4, US10, US10B, US26, US26D, US32D Optional: RAL powder coat finishes available.Consult factoryone side is used for exit, push handle only. Order HL6EOfor applications where the security of no entry isrequired.Suffix L (lead lining)The lead lining kit provides lead components to covercut-outs made in lead lined doors.Suffix SOC (Pin-in-socket security screws)The option of having pin-in-socket security screwsinstead of standard screws. Pin-in-socket screws areprovided for the strike, latch bolt and covers.* For Schlage models 9082EL Mortise and 9082EU Mortise, contact customer service for pricing availabilty.8 Glynn-Johnson Push/pull latches
How to orderHL6Options:BEENEOLSOCBrass base material on US26D(1, 2, 3, 4, 5, or 6) - engraved handlesEntrance onlyExit onlyLead linedPin-in-socket security screwsLock function:See page 109000RK Retrofit -AMDoor thickness:BlankPolished brassSatin brassSatin bronzeOil rubbed bronzeSatin chromeSatin chrome - antimicrobialSatin stainless steelSatin stainless steel - antimicrobial1 3 4" door, specify other thicknessGlynn-Johnson Push/pull latches 9
Mortise lock functions availableStandard lock functionsLock Number – ANSI Functions – Description9010 – F01 – Passage latch9082 – Institution lockLatchbolt retracted by key from either side. Handleon both sides always inoperative. Auxiliary latchdeadlocks latchbolt when door is closed.Latchbolt retracted by handle from either side at all times.9082EL w/XL11-452 – Electrically locked (fail safe)9040 – F22 – Bath/bedroom privacy lockOutside and inside handle continually locked with 24VLatchbolt retracted by handle from either side unlessAC or DC. Latchbolt retracted by key either side. Switchoutside is locked by inside thumbturn. Activating insideor power failure allows outside and inside handle tohandle or closing door unlocks outside handle. To unlockretract latchbolt. Auxiliary latch deadlocks latchboltfrom outside, remove emergency button, insert emergencywhen door is closed.*turn in access hole and rotate.9082EU w/Xl11-452 – Electrically unlocked (fail safe)9050 – F04 – Office/inner entry lockOutside and inside handle unlocked with 24V AC or DC.Latchbolt retracted by handle from either side unlessLatchbolt retracted by key either side. Auxiliary latchoutside is made inoperative by key outside or by turningdeadlocks latchbolt when door is closed.*inside thumbturn. When outside is locked, latchbolt is9453 – F20 – Entrance lockretracted by key outside or by handle inside. Outside handleremains locked until thumbturn is turned to the unlockedposition or outside key is unlocked. Auxiliary latchdeadlocks latchbolt when door is closed.9060 – F09 – Apartment lockLatchbolt retracted by handle from either side unlessoutside is locked by 20 rotation of thumbturn. Whenlocked, key outside or handle inside retracts deadboltand latchbolt simultaneously. Outside handle remainslocked until thumbturn is restored to vertical position.Latchbolt retracted by handle from either side unlessThrowing deadbolt automatically locks outside handle.outside is locked by key from inside. When locked, latchboltAuxiliary latch deadlocks latchbolt when door is closed.retracted by key outside or handle inside. Auxiliary latch9456 – F13 – Corridor lockdeadlocks when door is closed.9070 – F05 – Classroom lockLatchbolt retracted by handle from either side.Deadbolt thrown or retracted by key outside or insideLatchbolt retracted by handle from either side unlessthumbturn. Throwing deadbolt locks outside handle.outside is locked by key. Unlocked from outside by key.Activating inside handle simultaneously retractsInside handle always free for immediate exit. Auxiliary latchdeadbolt and latchbolt, and unlocks outside handle.deadlocks latchbolt when door is closed.9465 – Closet/storeroom lock9080 – F07 – Storeroom lockLatchbolt retracted by handle from either side.Latchbolt retracted by key outside or by handle inside.Deadbolt extended or retracted by key outside.Outside handle always inoperative. Auxiliary latch9466 – F14 – Store/utility room lockdeadlocks latchbolt when door is closed.9080EL – Electrically locked (fail safe)Outside handle continuously locked by 24V AC or DC. Latchbolt retracted by key outside or handle inside. Switch orpower failure allows outside handle to retract latchbolt.Auxiliary latch deadlocks latchbolt when door is closed.Latchbolt retracted by handle from either side.Deadbolt thrown or retracted by key from either side.9473 – F21 – Dormitory/bedroom lockLatchbolt retracted by handle from either side. Deadboltthrown or retracted by key outside or thumbturn inside.Inside handle always free for immediate exit.9485 – Hotel lock9080EU – Electrically unlocked (fail secure)Latchbolt retracted by key outside or by handleOutside handle unlocked by 24V AC or DC. Latchboltretracted by key outside or handle inside. Auxiliary latchdeadlocks latchbolt when door is closed. Inside handlealways free for immediate exit.*For Schlage models 9082EL mortise and 9082EU mortise,contact customer care for pricing availabilty.10 Glynn-Johnson Push/pull latchesinside. Outside handle always fixed. Deadbolt thrownor retracted by inside thumbturn. When deadbolt isthrown, all keys become inoperative except emergencyor display keys. Activating handle retracts both deadboltand latchbolt simultaneously. Auxiliary latch deadlockslatchbolt when door is closed.
Push/pull latchesEngraving guideMounting positionTo order, specifyPush up, pull down§§ Any backsetE1§§ Non-handed§§ No PL7 or PL8Push up, pull up§§ Any backset E2§§ Non-handedHorizontal engraving§§ Any backset E3§§ RH§§ No PL7 or PL8Horizontal engraving§§ Any backset E4§§ LH§§ No PL7 or PL8Push down, pull up§§ Any backset E5§§ Non-handed§§ No PL7 or PL8Push down, pull down§§ Any backset E6§§ Non-handedHorizontal engraving§§ 7" backset onlyE4§§ RH§§ No mortise lockHorizontal engraving§§ 7" backset only§§LH§§No mortise lockE3Glynn-Johnson Push/pull latches 11
About AllegionAllegion (NYSE: ALLE) creates peace of mind by pioneering safety and security.As a 2 billion provider of security solutions for homes and businesses, Allegionemploys more than 8,000 people and sells products in more than 120 countriesacross the world. Allegion comprises 27 global brands, including strategicbrands CISA , Interflex , LCN , Schlage and Von Duprin .For more, visit www.allegion.com 2014 Allegion001400, Rev. 05/14allegion.com/us
the lock function. If Schlage mortise locks are already installed, the set can be easily converted to push/pull operation with minor modifications to door.* Mortise lock functions available For a list of standard lock functions available see page 10. For other lock functions, consult factory. Six options: § B—Brass base material for US26D finish
