Transcription
Products compatible with SGG BIOCLEAN and SGG BIOCLEAN IIUpdate October 2018
Introduction:This technical guide update has the aim to give practical information on glazing materials thatare compatible with SGG BIOCLEAN and BIOCLEAN II during the glazing work and after.For any product, guidance should be sought from the supplier regarding its suitability as aglazing material, or it's compatibility with other glazing materials. The glazing method shouldalso take into account the recommendations given in relevant national standards, regulations,codes of practice and recommendations of the manufacturer or supplier of the glazingmaterial.If you have any further questions, please contact your Saint-Gobain Glass Sales Manager.The products mentioned in this document were compatible with SGG BIOCLEAN andBIOCLEAN II at the date of the test. It is fully recommended to check with the supplier thatthe product hasn't been modified since that date. Saint-Gobain Glass is not responsible forany modification.Disclaimer: This information is provided by Saint-Gobain Glass for general informationpurposes only without any warranty or representation. Any use of such information is madestrictly at your own risk.Contents:1. Conventional windows with 4 sides framed, curtain walls 1.1 Wet sealant1.2 Gasket1.3 Lubricant for gasket1.4 Window system1.5 Construction / frame wet sealant1.6 Sealant for Double Glazing Unit2. Glass to glass sealing: monolithic and laminated glazing2.1 Glass to Glass sealant for monolithic glazing2.2 Glass to Glass sealant for laminated glazing3. Strips, Décor, Leading and Tape4. Structural glazing / Protective films4.1 Protective films4.2 Glass to glass sealing5. Cleaning agents345101112121314151618191920
1. Conventional windows with 4 sides framed, curtain walls 1.SGG BIOCLEANor BIOCLEAN II outsidewet sealantor gasketWindow systemDGU sealant
Conventional windows with 4 sides framed, curtain walls 1.1.Wet sealant (1/2):The products mentioned in the table below are compatible with SGG BIOCLEAN and BIOCLEAN II at the indicated date of test. It is fully recommended tocheck with the supplier that the product hasn't been modified since that date. Saint-Gobain Glass is not responsible for any modification.Glass to frame sealingImportant: There are no silicone sealants compatible with SGG BIOCLEAN and BIOCLEANHybrid based sealants below.FamilySupplierHybrid-PolymerATEPolymerAZ ElectronicalMaterials (Merck)DurazaneHybrid-PolymerDana Lim A/SDanaseal Interior 521Den BravenHybrid-PolymerDow CorningHybrid-PolymerFenoplast FügetechnikPolymerKömmerlingHybrid-PolymerMerz Benteli AGSilikonprofilSika EngineeringSiliconesSikaSCG TEC SoudalReferenceSealcleanHybriseal 2PSDC 757 BlackFenotherm Comp.AFenotherm Comp.BII. Product alternatives are either the SCG Tec or MS-Polymer orCommentSNJF G25EISO EN 11600 G25Adhesion: ISO EN 11431SNJF G25EISO EN 11600 G25Adhesion: ISO EN 11431ISO EN 11600 G25LMAdhesion: ISO EN 11431ISO EN 11600 G25 LMAdhesion: ISO EN 11431Korapur 45Schwartz/BlackMerbenit UV27* blackSikasil WS-680 SCISO EN 11600 G25SNJF G25EAdhesion: ISO EN 11431ISO EN 11600 G25 LMAdhesion: ISO EN 11431Sikaflex CrystalClearSMX 506 blackISO 11600 G25 LMAdhésion: ISO EN .soudal.com
Conventional windows with 4 sides framed, curtain walls 1.1.Wet sealant (2/2):The products mentioned in the table below are compatible with SGG BIOCLEAN and BIOCLEAN II at the indicated date of test. It is fully recommended tocheck with the supplier that the product hasn't been modified since that date. Saint-Gobain Glass is not responsibl
EPDM Thyssen-Krupp "ribs-gasket" 132 515 Talc slipping 03/2005 www.thyssenkrupp-plastics.de EPDM Thyssen-Krupp "ribs-gasket" 132 516 Talc slipping 03/2005 www.thyssenkrupp-plastics.de EPDM, talc Thyssen-Krupp "ribs-gasket" 132 518G Talc slipping 03/2005 www.thyssenkrupp-plastics.de EPDM Thyssen-Krupp "ribs-gasket" 132 519
