WIXLIB

17Polyethylene Pipe, Location Material500' Roll1000' RollIPSCTSSDR / WallThicknessSDR 9.3; 0.090"SDR 7.0; 0.090"-PE2406-12CTS*PE2406-12--3/ "4IPS1" IPSSDR 11.0; 0.095"SDR 11.0; 0.119"PE2406-34PE2406-100250' RollPE2406-34-250*--1" CTS11/4" IPSSDR 11.5; 0.099"SDR 10.0; 0.166"PE2406-100CTSPE2406-114PE24061CTS250*--2" IPSSDR 11.0; 0.216"PE2406-20040' Straight LengthsPE2406-200-40**3" IPS4" IPSSDR 11.5; 0.304"SDR 11.5; zePolyethylene pipe has beenapproved for use with propanesince 1979. It may be fusionwelded or mechanicallyconnected, and used onlyunderground with 30 poundsmaximum pressure.Polyethylene piping is asafe and economical method ofsatisfying industrial, commercial &residential customers’ needs forlong runs of underground piping.No worry of corrosion.1/ "21/ "26" IPSSDR 11.5; 0.567"-PE2406-600-40**8" IPSSDR 11.5; 0.750"-PE2406-800-40*** UPS shippable package**Minimum of five 40' lengths. Non stock. FOB factory.IMPORTANT: Installers must be qualified.POLY COATED TRACER WIRE “COPPERHEAD”Tracer SPACERThe TracerSpacer is a simple, low cost, snap-on devicedesigned to provide a consistent separation between plasticpipe and its tracer wire.Copperhead Reinforced Tracer Wire, the intelligent choice fortracer wire. Copperhead Reinforced Tracer Wire combinesthe strength of hi-carbon steel with the conductivity andcorrosion resistance of copper through a metallurgicalbonding process. The result: a more cost-effectivecomposite with superior performance characteristics overtraditional 100% copper wire.RMIDescriptionPart No.14-114 gauge poly tracer wire - 500' spool12-1RMIPart No.TS 150X6TS 2X12TS TS200TS300TS400DescriptionTRACER SNAP WIRE RETAINER 1-1/2"x6"TRACER SNAP WIRE RETAINER 2"x12"TRACER SNAP WIRE RETAINER 2"x6"TRACER SNAP WIRE RETAINER 3/4"x6"TRACER SNAP WIRE RETAINER 1"x2"TRACER SNAP WIRE RETAINER 1"x6"TRACER SNAP WIRE RETAINER 1"x6 ftTRACER SNAP WIRE RETAINER 1-1/4"x2"TRACER SNAP 1-1/4"X12"TRACER SNAP WIRE RETAINER 1-1/4"x6"TRACER SNAP 1"X6" WITH EFV TAGTRACER SNAP 2-1/2"X12"TRACER SNAP 3/4"X12"TRACER SNAP RETAINER 3/4"x2"TRACER SNAP WIRE RETAINER 3/4"x6 ftTRACER SNAP 1-1/2"X12"TRACER SPACER 1/2"TRACER SPACER 3/4"TRACER SPACER 1"TRACER SPACER 1-1/4"TRACER SPACER 2"TRACER SPACER, 3"TRACER SPACER, 4"Tel: 800-628-504412 gauge poly tracer wire - 500' spoolCopperhead Tracer Wire14-1-CCS 14 gauge tracer wire - 500' spool12-1-CCS 12 gauge tracer wire - 500' spool90120GEL-LUGLOCATOR TAPE & FLAGS“CAUTION GAS LINE LINE BELOW”Bury locator tape 6" below gradedirectly above polyethylene pipe.Metalic and non-metalic tape isavailable.RMIDescriptionPart No.GT-3Metallic Locator TapeNT-3Non-metallic Locator Tape3" Non-metallic Yellow Tape w/"Caution"CST-3Marking Only78-004Yellow marking flags, 4" x 5" - 100 CountRAY MURRAY, INC.Order online at www.raymurray.comor call for personal assistanceFax: 800-243-8341 Ray Murray Inc. Edition 11PIPINGPolyethylene Pipe

Flexible and Rigid Risers18Anodeless Service linePERMASERT mechanical RISERSPerfection anodeless riser with Permasert coupling installed,which allows for fast, easy, and reliable mechanical connection.Anodeless ServiceLine Riser(Coupling End)Typical of all risersin chart on right.75906*SizePlastic(Inlet)1/ " CTS21/ " CTS23/ " IPS41" CTS1" IPS11/4" IPSPipe(Outlet)1/ "23/ "43/ "43/ "41"11/4"2" IPS2"--* IAPMO listed version; required in Canada.** Also available in 22" Vert. x 18" Horiz. (Part # 77201)anodeless SERVI-SERTField-AsSembled Risers w/ liners84"Riser allows the installer to run the polyethylene pipe to a Permasertconnector located at the service head adapter. Choice of pre-bent epoxycoated pipe, flexible with stub riser, or fully flexible kit. Complies withNFPA-58, 1995 Edition and CAN/CGA-B149.2-M95. The fully flexible riserkit can be used to connect the plastic service line to the tank. No more needto have a coupling, fusion, transition or copper fitting below ground.Rigid pre-bentServi-Sert RiserFully FlexibleStub Flexible Riser Rigid Pre-Bent RiserSizeServi-SertRiser Kit*w/ Linerw/ LinerFitting**36"60"84" 36" Flex w/ Nipple 30" Vert. x 24" Horiz.Plastic Pipe1/ " CTS1/ "71354 -- 71353713517135071110221/ " CTS3/ "71356 -- 713557146371453711002436"Servi-Sert FittingFully Flexible Riser Kits71410 71411 71412----717217173171304anodeless RISERS Ray Murray Inc. Edition 11Service risers are pre-bent to30" vertical x 24" horizontal.Anodeless risers require nocathodic protection, since theoutside epoxy coated casingis not the gas carrier–plasticruns all the way through. Risersand transition fittings can beused with mechanical or fusionfittingsTRANSITION FITTINGSTransition FittingTel: 800-628-50443/ "4IPS1" IPS3/ "4711511" CTS1"---7160071720*Conforms to requirements of NFPA58.** Servi-Sert fitting for use with pipe only. Not used with risers.Transition fitting is epoxy coatedand should be cathodicallyprotected.1"1/ "21/ "2IPS--TransitionFittingsStraight 18"TF-12X121/ "21/ "2CTS--TF-12X12CTS3/ "41/ "2IPS TRA-34X12TF-34X123/ "41/ "2CTS TRA-34X12CTSTF-34X12CTS3/ "43/ "4IPS TRA-34X34TF-34X343/ "41" CTS TRA-34X100CTS**TF-34X100CTS1"3/ "4-TF-100X100TF-100X100CTSSizeAnodelessService Line Riser7116171160Pipe1"1"11/4"PlasticAnodeless Riser30" Vert. x 24" Horiz.IPS TRA-100X341" IPS TRA-100X1001" CTS TRA-100X100CTS**11/4" IPS TRA-114X114TF-114X1142"2" IPS TRA-200X200*TF-200X2003"3" IPS TRA-300X300*TF-300X3004"4" IPS TRA-400X400*TF-400X400* Stub risers-with fused polyethylene 90o elbow and polyethylenepipe pigtail. ** Non StockRAY MURRAY, INC.Order online at www.raymurray.comor call for personal assistanceFax: 800-243-8341PIPINGAnodeless w/ Permasert Anodeless w/ Permasert18" Vert. x 18" Horiz.30" Vert. x 24" Horiz.(For underground 75901*--

Permasert Mechanical Couplings19PE100 PERMASERT MECHANICAL COUPLINGSNew PE100 material fused on all Perfection fittings offerseveral significant performance enhancements includingability to join PE2406 and PE3408 pipe, superiorresistance to Rapid Crack Propagation and superiorresistance to Slow Crack Growth. PE100 has been usedaround the world for over 20 years.Permasert Mechanical CouplingCoppersert Transition CouplingMechanical CouplingCoppersertCopper to pe fittingRMIPart No.50100The heart of the system is the non-corrosive mechanicalfitting. These fittings are available in sizes 1/2" & 1" CTS;1/ " through 8" IPS.2The mechanical coupling makes service line installationssafe and simple. The coupling is not only “pull-out proof”,it is also incredibly easy to install.PE PipeSize1/ " CTS2SDRSizeSDR7WallThickness0.090"50701A1/ "2IPSSDR9.30.090"500303/ "4IPSSDR110.095"501035060150035010503141" CTS SDR11.51" IPSSDR1111/4" IPS SDR102" IPSSDR110.099"0.119"0.166"0.216"RMIPart No.410074101341002411304115041153PE Pipe CopperWallSizeSizeThickness1/ " CTS 3/ " O.D.0.090"281/ " CTS 1/ " O.D.0.090"221/ "23/ "4CTSIPS1" CTS1" CTS5/ "8O.D.O.D.5/ " O.D.80.090"0.090"0.090"1/ "20.090"5/ "8O.D.The self-contained steel stiffener guarantees proper alignment, provides support, and further promotes sealing power and pulloutresistance.NOTE: Installer must be certified.PE100 WYES & reducing WYEsRMIPart No.50751509691/ "21/ "2501491/ "250641SDR/WallSizeSizeSDR/WallSDR7.0 (0.090")1/ "2IPSCTSSDR7.0 (0.090")3/ "4IPSCTSSDR7.0 (0.090")1" CTSSDR7.0 (0.090")1" IPSSDR11 (0.119"SDR9.3 (0.090")3/ "4SDR11 (0.095")501481/ " CTS21/ " IPS23/ " IPS4514323/ "4SDR11 (0.095")SDR11 (0.095")1" CTS1" IPSSDR11.5 (0.099")SDR11 (0.119")501950103/ "411/4" IPS1" IPS11/4" IPS11/4" IPS2" IPSSDR10 (0.166")SDR11 (0.119")SDR10 (0.166")50756CTSIPSIPSSDR11 (0.095")506231" CTS SDR11.5 (0.099")501921" CTS SDR11.5 (0.099")50343010 1" IPSSDR11 (0.119")50333010 11/4" IPS SDR10 (0.166")IPSSDR9.3 (0.090")PE100REDUCINGCOUPLINGSSDR11 (0.095")SDR11.5 (0.099")Permasert Reducing CouplingRMIDescriptionSizeSDR/WallPart No.51702WYE1/2" CTS.090WYE w/blind51701Y1/2" CTS.090end caps51704YWYE1 CTS.099Reducing 3/4" IPS X51766Y.090WYE1/2" CTSSDR10 (0.166")SDR11 (0.216")PE100 REPAIR COUPLINGSPermasert Repair CouplingLocate and inspecta damaged pipe andsimply and easily repairdamaged section withsize of coupling required.No need for fusion,welding, or taping. Saveon repair time.RMIPart No.50056PE100 BLIND END CAPS / STUBSSizeLength12"12"SDR9.3 (0.090")501751/ " CTS21/ " IPS23/ " IPS4SDR / WallThicknessSDR7 (0.090")50172506401" CTS1" IPS12"12"13"SDR11 (0.095")0.099" / 0.103"SDR11 (0.119")5032010011/4" IPS13 1/4"SDR10 (0.166")5074050341*2" IPS 15 1/2" SDR11 (0.216")*IMPORTANT: 11/4" and 2" have specialinstallation instructions provided on packaging.Tel: 800-628-5044 Creates a “branch” ineach dwelling serviceline for the installationof multiple servicelines. Use of a blind end capallows installation of afull piping system to ahousing development.Permasert BlindEnd Cap/StubRMIPart No.5001650716SizeSDR / WallType1/ " CTS21/ " IPS23/ " IPS40.090"Cap0.090"SDR11Used to safely shut 50026off service or to500451" CTS 0.099"/ 0.103"close the end of a 5003311/4" IPSSDR10service line. Only503172" IPSSDR11open end of “stub”506121" IPSSDR11is functional. Bothends of blind “cap” may be used as a coupling.RAY MURRAY, INC.Order online at www.raymurray.comor call for personal assistanceCapCapCapCapCapStubFax: 800-243-8341 Ray Murray Inc. Edition 11PIPINGPerfection offers a complete, mechanically joinedpolyethylene LP gas distribution system that complies withNFPA-58. In addition, the Perfection line of products meet orexceeds the applicable requirements of:ASTM D-2513; US DOT Part 192; CSA B137.4 and IAPMO.