Transcription
Model 907 MultiplexerProduct GuideModel 903Model 907Model 912The family of Focal Model 907products provides compact andrugged video/data multiplexers andfiber-optic transmission systems.The Model 907 was designed for applications requiring the transmission of video and/or data over an opticallink. A modular PC/104 form-factor and flexible design architecture supports reconfiguration and expansionof the multiplexer system to fit the specific data requirements of each application.Model 914Typical ApplicationsThe Model 907 product family is suited particularly well to applications requiring small and ruggedizedfiber-optic converters, such as:Remotely Operated Vehicles (ROVs)Explosive Ordinance Disposal (EOD)and pipe inspection robotsIndustrial automation equipmentWind energy turbinesVideo security networksDefense and other high reliabilityruggedized applications includingradar, ground vehicles, andElectro-Optic (EO) targetingand surveillance podsMarket SpecificCustom Model 907 systems are assembledfrom four main categories of cards: Multiplexer motherboardsMedia convertersExpansion cardsSystem modulesMoog Components Group www.moog.com/marine1919
Model 907 Product GuideModel 903Multiplexer MotherboardsA Model 907 system consists, as a minimum, of a Model 907 remote motherboard (multiplexer), and a Model 907 consolemotherboard. Each motherboard can operate as a standalone multiplexer used to combine analog video, digital video, orEthernet with on-board or backplane serial data such as RS-232 and high-speed RS-485/422. Motherboards can all bestacked together and communicate with expansion cards to send and receive data over the backplane for additional datacapabilities.HOST ELECTRONICSFOCAL 907 SYSTEMFOCAL 907 SYSTEMVIDEO DATAMOTHERBOARDVIDEO DATAMOTHERBOARDMULTIPLE VIDEOMULTIPLE RS-232OPTICAL FIBERHOST ELECTRONICSMULTIPLE VIDEOMULTIPLE RS-232Market SpecificModel 914Model 912Model 907MULTIPLE RS-485ETHERNETEXPANSION CARD10/100ETHERNET907 motherboards can be optically configured with Coarse Wave Division Multiplexer (CWDM) transceivers for use withpassive 907 optical cards. High power transceivers are available for demanding optical systems, and low cost transceiversare available for cost sensitive applications.Motherboard907-R/C907 907V907-HDM2907-GEMDescription3-ChannelVideo/Data Mux4-ChannelVideo/Data Mux6-ChannelVideo Mux2-ChannelHD-SDI/Data Mux4-ChannelGigabit Ethernet MuxPart Number907-0001-XX (R) 907-0025-XX (R) 907-0023-XX (R)907-0002-XX (C) 907-0026-XX (C) 907-0024-XX (C)907-0050-XX (R)907-0051-XX (C)907-0060-XXNTSC, PAL,RGB, S-Video(Y/C)NTSC, PAL,RGB,S-Video (Y/C)NTSC, PAL,RGB, S-Video(Y/C)HD-SDI(SMPTE-292)GigE Vision3461-2 HD-SDI4 maxSupportedData FormatsRS-232,RS-485/422,Backplane dataRS-232,RS-485/422,Backplane dataBackplane dataRS-232,RS-485/422,Backplane data10/100/1000Base-T Ethernet,Backplane DataOn-board DataChannels66None24 EthernetSupport THERNETEXPANSION CARD10/100ETHERNETSupportedVideo Formats20MULTIPLE RS-485Moog Components Group www.moog.com/marine
Model 907 Product GuideMedia Converter CardsMedia converter cards provide direct electrical to optical signal conversion and transmit over one or two dedicated opticalfibers. A number of signal formats are supported, including ECL/PECL signals for Cypress HOTLink and multi-beam sonarlinks; high-definition digital video (SMPTE-292); and one, two, or four isolated channels of Gigabit Ethernet.HD VIDEOHD-SDI MEDIACONVERTER10/100/100ETHERNETGIGABIT ETHERNETMEDIA CONVERTERFOCAL 907 SYSTEMHOST ELECTRONICSOPTICAL FIBERHD-SDI MEDIACONVERTERHD VIDEOOPTICAL FIBERGIGABIT ETHERNETMEDIA CONVERTER10/100/100ETHERNETModel 907FOCAL 907 SYSTEMModel 903HOST ELECTRONICS907-GBE2907-GBES907-ECLSingle HD-SDI,SDISingle GigabitEthernet MediaConverterDual GigabitEthernet MediaConverterQuad GigabitEthernet SwitchSingle ECL/PECL/Hotlink MediaConverterPart 907-0019-XXChannel idirectionalUnidirectionalNRZ Data Rate143 – bps30 – 600 MbpsI/O Connectors2 x SMB In,2 x SMB Out1 x RJ-452 x RJ-454 x RJ-452 x SMB In,2 x SMB OutSupport forE-DiagnosticsYESNOYESYESYESDescriptionMoog Components Group www.moog.com/marine21Custom907-GBEMarket Specific907-HDVModel 914MediaConverterModel 912Media converters may be deployed as standalone cards running on their own dedicated optical fiber or configured to supportCWDM optical transceivers that allow for optical multiplexing of multiple cards using one of the passive 907-CWDM opticalcards. High power transceivers are available for demanding optical systems, as well as, low cost transceivers for costsensitive applications.21
Model 907 Product GuideExpansion CardsCustomMarket SpecificModel 914Model 912Model 907Model 903Up to six expansion cards may be stacked on a 907 motherboard using the backplane connector for power and signals. Eachexpansion card provides an increased number of data channels or added signal formats not supported by the motherboarddirectly. An Adaptable Interface Board (AIB) expansion card allows standard AIB plug-in daughter-card modules to beemployed as well.ExpansionCardDescriptionPart NumberBPChannelsusedMax. DataRateI/O 0 kbps4 x 8 pin Molex907-4858-ChannelRS-485/422 Card907-0217-001, 2, 4250 kbps to2.5 Mbps14 x 8 pin Molex907-SER8-ChannelRS-232/485/422 Card5907-0242-001, 2, 4250 kbps to2.5 Mbps4 x 8 pin Molex907-ADC/DAC8-Channel,8/12-bitADC/DAC3CardADC: 907-0218-00DAC: 907-0219-00150 kHzBandwidth2 x 8 pin Molex907-AUDIO4-Channel,24-bit AudioCard907-0228-00120 kHzBandwidth4 x 2 pin WAGO2 x 3 pin 00150 kHzUpdates4 x 2-Pin WAGO2 x 3-Pin WAGO907-AIBDual SocketAIB Adaptor907-0204-001, 2Up to2.5 Mbps22 x 4-Pin WAGO907-EIBS10 MbpsEthernetSwitch Card907-0222-00110 Mbps3 x RJ-451. Maximum NRZ data rate increases with number of backplane channels used on the motherboard2. Maximum NRZ data rate or analog bandwidth depends on the AIB plug-in modules installed.3. Use 907-ADC Analog Input Card, P/N 907-0218-00 with complementary 907-DAC Analog Output Card, P/N 907-0219-004. CIB inputs are individually configurable as switch or voltage controlled; CIB outputs are all solid state relays, max. current 250 mA.5. 907-SER supports Ethernet diagnostics when used with the 907-DIAG-E22Moog Components Group www.moog.com/marine
Model 907 Product GuideAdaptable Interface Boards (AIB)AIB plug-in modules are compatible with the Model 903, the Model 907, and the Model 914 product lines. The 907-AIB hastwo sockets for separate AIB plug-in modules. AIB plug-in modules are available for a variety of low speed data signals.Model 903Model 907Model 912907-AIB Supports Two AIB Plug-in ModulesAIB plug-in modules are used to convert the signal interface format to a TTL format, which is then accessed through theexpansion port on the 907 motherboard. AIB plug-ins support standard serial data interfaces (RS-232/485/422), hydrophoneand other audio signals, various digital and analog sonar telemetry, and control networks, such as CAN Bus and Profibus.Model 914AIB-485AIB-HYDROAIB-ARCNETAIB-MS900AIB-CAN BusDescription1 x RS-2321 x RS-485/4221 x Hydrophone1 x TritechARCNET1 x MS-900Analog Sonar1 x CAN BusBridgePart onalBidirectional120 kbps2.5 Mbps30 Hz - 30 kHzBW156 kbps/78kbps5 - 30 kHz,380 - 580 kHz62.5 kbps - 1MbpsNRZ Data RateI/O ConnectorsOptionsCustomAIB-232Market SpecificAIB Card4-pin WAGO headers on 907-AIB adapter cardResponderTriggerMoog Components Group AC-Coupled485, TTLwww.moog.com/marineIRIG-B, AudioTerminationsLow SpeedTelemetry (LF)Repeater Mode2323
Model 907 Product GuideSystems with only one motherboard or media converter typically transmit at an optical wavelength of 1310 nm for uplink and1550 nm for downlink. In larger systems with multiple 907 motherboards, media converters and expansion cards, fiber-opticsignals may be combined on a single fiber using a Coarse Wavelength Division Multiplexer (CWDM) to take advantage ofthe high bandwidth of optical fiber. CWDM optical wavelengths are separated by 20 nm and range from 1471 nm to 1611nm. Bidirectional optical signals occupy two distinct wavelengths. For example a 907-GBE Media Converter using CWDMwavelengths may use 1471 nm for uplink traffic and 1491 nm for downlink traffic.To provide redundant communications between host electronics in the case of a fiber-optic cable failure, one system maybe fitted with a fiber-optic splitter, while the other system is fitted with a fiber-optic switch. All optical traffic from the splittersystem is transmitted along both fiber-optic cables. The switch system can manually or digitally (TTL) select one of the twofibers for communication.Model 914Model 912Model 907Model 903Optical CardsRXTXWDMTXRXWDMRXTXWDMWDMOPTICAL FIBERTXRXIntegrated WDM for 1310/1550 nm on One FiberRXTX4 CHANNELCWDMRXTXMarket SpecificWDMOPTICAL FIBERTXRX4 CHANNELCWDMOPTICAL FIBERTXRXCustom4-Wavelength CWDM24RXTXWDM1x2SPLITTER2x1SWITCHOPTICAL FIBERWDMTXRXWDM, Splitter and SwitchMoog Components Group www.moog.com/marine
Model 907 Product GuideOptical CardsOptical Card907-CWDMCWDM Optics Card,1471/1491 nm with1310/1550 nmBypass, Singlemode907-0015-001310/1550 nm bypass port for easyupgrade of existing 1310/1550 nmsystem907-CWDM-MMCWDM Optics Card,1471/1491 nm with1310/1550 nmBypass, Multimode907-0015-021310/1550 nm bypass port for easyupgrade of existing 1310/1550 nmsystem907-CWDM-4R1CWDM Optics Card,1471 - 1531 nm,Singlemode,20 nm Spacing907-0015-03Optional 1310 nmBypass Port907-CWDM-8RCWDM Optics Card,1471 - 1611 nm,Singlemode,20 nm Spacing907-0015-20Optional 1310 nmBypass Port907-SPLIT-SM1 x 2 Fiber SplitterCard, Singlemode907-0015-05Provides redundant fiber operation907-FOS-SM1 x 2 Fiber SwitchCard, Singlemode907-0015-06Provides fiber-optic switch withmanual or remote digital control(TTL)Moog Components Group www.moog.com/marine25CustomCard-mounted, PC/104Market Specific907-0015-35Model 914WDM Optics Card,1310/1550 nm,Singlemode907-WDMModel 912Features/OptionsModel 907Part NumberModel 903Description25
Model 907 Product GuideOil Filled/Pressure TolerantMarket SpecificModel 914Model 912Model 907Model 903Standard Model 907 products require a 1 atmosphere (ATM) enclosure when used in subsea applications. However, specific907 products are available in pressure tolerant versions for use in Pressure Balanced Oil Filled (PBOF) applications. Referto application note AN-03 for a detailed analysis of pressure tolerant electronics.CardCard TypeDescriptionPart NumberPressure Rating 2907 PMultiplexerMotherboard4-Channel Video/Data Mux907-0035-XX6000 psi907V-PMultiplexerMotherboard6-Channel Video MuxWith Bidi Transceiver907-0033-033000 psi907V-PMultiplexerMotherboard6-Channel Video Mux907-0033-XX16000 psi907-GBE-PMedia ConverterSingle Gigabit EthernetMedia Converter907-0043-XX16000 psi907-GBE2-PMedia ConverterDual Gigabit EthernetMedia Converter907-0031-XX16000 psi907-GBES-PMedia ConverterQuad Gigabit Ethernet Switch907-0028-XX16000 psi907-232-PExpansion Card8-Channel RS-232 Card907-0212-026000 psi907-485-PExpansion Card8-Channel RS-485/422907-0217-016000 psi907-SER-PExpansion Card8-Channel RS-232/485/422907-0242-026000 psi1907-CIB-PExpansion Card4-Channel Control Interface907-0231-016000 psi907-AIB-PExpansion CardDual Socket AIB Adaptor907-0204-016000 psi907-EIBS-PExpansion Card10 Mbps Ethernet Switch Card907-0222-016000 psi907-CWDM-4R1-POptical CardCWDM Optics Card,1471-1531 nm, Singlemode,20 nm Spacing907-0015-326000 psi907-CWDM-8R-POptical CardCWDM Optics Card,1471-1611 nm, Singlemode,20 nm Spacing907-0015-216000 psi907-WDM-POptical CardWDM Optics Card, 1310/1550 nm,Singlemode907-0015-366000 psi907-SPLIT-SM-POptical Card1 x 2 Fiber Splitter Card,Singlemode907-0015-056000 psiCustom1. XX – CWDM wavelength (47 1471, 49 1491, 51 1511, 53 1531, 55 1551, 57 1571, 59 1591, 61 1611 nm). Other wavelengths available by request.2. 6000 psi 412 bar 4 km ocean depth and 3000 psi 206 bar 2 km ocean depth26Moog Components Group www.moog.com/marine
Model 907 Product GuideSystem CardsSystem cards provide the support functions required to adapt the Model 907 architecture to many different applications.These cards provide mechanical integration of the 907 into Eurocard form-factor, electrical interoperability with thestandardized PC/104 backplane, operation with 18-30 VDC input, and 907 diagnostics.Model 903Model 907System Card907-EURODescriptionEthernet Diagnostic CardIsolated DC-DCPower Supply Cardfor 18-30 VDC InputEurocard AdaptorPart Ethernet Output. API andsample GUI available. Readsdiagnostics from compatiblecards in 907 stacks.Supports 18-30 VDC input,provides multiple 5 VDCoutputs4 HP and 8 HP optionsavailable, typically suppliedassembled with 907 cardFeatures/OptionsModel 914907-DC-24Model 912907-DIAG-EMarket SpecificCustomMoog Components Group www.moog.com/marine2727
Model 907 Product GuideSpecific 907 products are compatible with the 907 Ethernet diagnostics. The907-DIAG-E system card combined with the diagnostics .NET graphical userinterface (GUI) allow for real time diagnostics of both remote and consolemultiplexer motherboards, media converters and expansion cards.Parameters include optical transmit power, optical receive power, opticaltransmitter temperature, voltages, and many more. The GUI can be configured to providealarms on conditions and log data. An application programming interface (API) is available toprovide a simple interface for customer developed software.CustomMarket SpecificModel 914Model 912Model 907Model 903Ethernet Diagnostics28Model 907 Ethernet DiagnosticsCompatible CardsCardCard Type907 Multiplexer Motherboard907VMultiplexer Motherboard907-HDM2Multiplexer Motherboard907-GEMMultiplexer Motherboard907-HDVMedia Converter907-GBE2Media Converter907-GBESMedia Converter907-ECLMedia Converter907-SERExpansion CardMoog Components Group www.moog.com/marine
Model 907 Product GuideKey SpecificationsModel 903Form Factor and Mounting Format supported: HD-SDI (SMPTE-292)Electrical Data Rate: 1.485 Gbps (3 Gbps option)Voltage: 800 mVP-P nominalImpedance: 75 ΩEthernet Options Support for full duplex 10/100/1000 Base-T(X) EthernetPhysical-layer (PHY) media converters for low latencyGigE vision cameras supportedSwitched Ethernet for additional port countMultiplexed options for multiple isolated channelsData Options Moog Components Group CustomDigital HD-SDI VideoMarket SpecificFormats supported: NTSC or PAL, RGB, S-Video (Y/C), YPbPr8-10-bit digitization, 6 MHz bandwidthVoltage: 1.2 Vp-p maximumImpedance: 75 ΩModel 914 Model 912Analog VideoModel 907 Model 907 cards use the standard PC/104 form factor of 3.55 x 3.775 inches(90 x 96 mm) The cards are outfitted with a PC/104 connector to provide backplaneconnectivity between multiple cards assembled in a vertical stack Cards stack one on top of the other, supported by 0.625 inch standoffs fitted intomounting holes on the corners of the card, and are electrically connected viathe PC/104 connector Some stack configurations require fiber pigtails to optically connect one cardto another 19-inch EIA rack mount enclosures and custom enclosures available uponrequestRS-232: bidirectional channels, 120 kbaud maximumRS-422/485: 5 Mbps NRZAIB plug-in cards support additional channels of RS-232,RS- 422/485, CAN Bus, Tritech ARCNET, and MS900 SonarOther signals such as TTL, On/Off, and support for Profibuswww.moog.com/marine2929
Model 907 Product GuideModel 903Power Input Voltage: 5 VDC 10%, regulated, 0.5-1.0 A typical (2.5 W to 5.0 W),per cardInput Protection: over-voltage, reverse polarity, over-currentModel 907 motherboards obtain power through a 2-pin Molex power connectorand are capable of providing power to other cards in the stack through thebackplane PC/104 interfaceIf regulated 5 VDC power supplies are not available, the 907-DC-24 PSU cardcan be added to a 907 stack to generate multiple 5 VDC supplies from 18-30VDC inputPressure TolerantMarket SpecificModel 914Model 912Model 907 Pressure tolerant versions of multiplexer motherboards, media convertersand expansion cards are available for pressures up to 6000 psiOptical Options Optical Fiber: 1 or 2 singlemode (9/125 µm), 1 or 2 multimode(50/125 µm and 62.5/125 µm)Wavelengths: 1310/1550 nm standard, CWDM options availableFlux Budget: 20 dB minimum standard (others available)Connectors: LC or ST, depending on card (others available)Diagnostics SupportDiagnostics extracted from compatible cards in both remote and console stacksusing 907-DIAG-E card. Diagnostic data is accessible over a 10/100 Base-T(X)Ethernet link to the 907-DIAG-EOptical transceiver data including Tx/Rx power, bias current, temperature,voltage, and moreCard identity, serial numberMotherboard data-channel activityEthernet port link speed and activity indicatorsSample .NET GUI and full API is availableLED diagnostics also available on board CustomCall or email our knowledgeable Application Engineers for more information:902-468-2263 or focal@moog.com30Moog Components Group www.moog.com/marine
A Model 907 system consists, as a minimum, of a Model 907 remote motherboard (multiplexer), and a Model 907 console motherboard. Each motherboard can operate as a standalone multiplexer used to combine analog video, digital video, or Ethernet with on-board or backplane serial data such as RS-232 and high-speed RS-485/422. Motherboards can all be
